mirror of
https://github.com/SeedSigner/seedsigner.git
synced 2026-10-05 15:08:25 +00:00
New module structure
This commit is contained in:
SeedSigner
@@ -0,0 +1,410 @@
|
||||
import ST7789
|
||||
import spidev as SPI
|
||||
import RPi.GPIO as GPIO
|
||||
|
||||
import time
|
||||
import subprocess
|
||||
|
||||
from PIL import Image
|
||||
from PIL import ImageDraw
|
||||
from PIL import ImageFont
|
||||
|
||||
from embit.bip39 import mnemonic_to_bytes
|
||||
from embit.bip39 import mnemonic_from_bytes
|
||||
|
||||
#GPIO define
|
||||
RST_PIN = 25
|
||||
CS_PIN = 8
|
||||
DC_PIN = 24
|
||||
|
||||
KEY_UP_PIN = 6
|
||||
KEY_DOWN_PIN = 19
|
||||
KEY_LEFT_PIN = 5
|
||||
KEY_RIGHT_PIN = 26
|
||||
KEY_PRESS_PIN = 13
|
||||
|
||||
KEY1_PIN = 21
|
||||
KEY2_PIN = 20
|
||||
KEY3_PIN = 16
|
||||
|
||||
RST = 27
|
||||
DC = 25
|
||||
BL = 24
|
||||
bus = 0
|
||||
device = 0
|
||||
|
||||
#init GPIO
|
||||
GPIO.setmode(GPIO.BCM)
|
||||
GPIO.setup(KEY_UP_PIN, GPIO.IN, pull_up_down=GPIO.PUD_UP) # Input with pull-up
|
||||
GPIO.setup(KEY_DOWN_PIN, GPIO.IN, pull_up_down=GPIO.PUD_UP) # Input with pull-up
|
||||
GPIO.setup(KEY_LEFT_PIN, GPIO.IN, pull_up_down=GPIO.PUD_UP) # Input with pull-up
|
||||
GPIO.setup(KEY_RIGHT_PIN, GPIO.IN, pull_up_down=GPIO.PUD_UP) # Input with pull-up
|
||||
GPIO.setup(KEY_PRESS_PIN, GPIO.IN, pull_up_down=GPIO.PUD_UP) # Input with pull-up
|
||||
GPIO.setup(KEY1_PIN, GPIO.IN, pull_up_down=GPIO.PUD_UP) # Input with pull-up
|
||||
GPIO.setup(KEY2_PIN, GPIO.IN, pull_up_down=GPIO.PUD_UP) # Input with pull-up
|
||||
GPIO.setup(KEY3_PIN, GPIO.IN, pull_up_down=GPIO.PUD_UP) # Input with pull-up
|
||||
|
||||
#initialize fonts
|
||||
impact18 = ImageFont.truetype('/usr/share/fonts/truetype/msttcorefonts/Impact.ttf', 18)
|
||||
impact23 = ImageFont.truetype('/usr/share/fonts/truetype/msttcorefonts/Impact.ttf', 23)
|
||||
impact26 = ImageFont.truetype('/usr/share/fonts/truetype/msttcorefonts/Impact.ttf', 26)
|
||||
|
||||
# 240x240 display with hardware SPI:
|
||||
disp = ST7789.ST7789(SPI.SpiDev(bus, device),RST, DC, BL)
|
||||
disp.Init()
|
||||
|
||||
# Create blank image for drawing.
|
||||
# Make sure to create image with mode '1' for 1-bit color.
|
||||
width = 240
|
||||
height = 240
|
||||
image = Image.new('RGB', (width, height))
|
||||
|
||||
# Get drawing object to draw on image.
|
||||
draw = ImageDraw.Draw(image)
|
||||
|
||||
def drawdi1selected():
|
||||
draw.rectangle((5, 50, 75, 120), outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(34, 79), (46, 91)], outline="BLACK", fill="BLACK")
|
||||
draw.rectangle((85, 50, 155, 120), outline="ORANGE", fill="BLACK")
|
||||
draw.ellipse([(100, 60), (112, 72)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(128, 98), (140, 110)], outline="ORANGE", fill="ORANGE")
|
||||
draw.rectangle((165, 50, 235, 120), outline="ORANGE", fill="BLACK")
|
||||
draw.ellipse([(180, 60), (192, 72)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(194, 79), (206, 91)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(208, 98), (220, 110)], outline="ORANGE", fill="ORANGE")
|
||||
draw.rectangle((5, 130, 75, 200), outline="ORANGE", fill="BLACK")
|
||||
draw.ellipse([(20, 140), (32, 152)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(20, 174), (32, 186)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(48, 140), (60, 152)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(48, 174), (60, 186)], outline="ORANGE", fill="ORANGE")
|
||||
draw.rectangle((85, 130, 155, 200), outline="ORANGE", fill="BLACK")
|
||||
draw.ellipse([(100, 140), (112, 152)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(100, 178), (112, 190)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(114, 159), (126, 171)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(128, 140), (140, 152)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(128, 178), (140, 190)], outline="ORANGE", fill="ORANGE")
|
||||
draw.rectangle((165, 130, 235, 200), outline="ORANGE", fill="BLACK")
|
||||
draw.ellipse([(180, 140), (192, 152)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(180, 157), (192, 169)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(180, 174), (192, 186)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(208, 140), (220, 152)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(208, 157), (220, 169)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(208, 174), (220, 186)], outline="ORANGE", fill="ORANGE")
|
||||
draw.text((18, 210), "Press Control Stick to Select", fill="ORANGE", font=impact18)
|
||||
|
||||
def drawdi2selected():
|
||||
draw.rectangle((5, 50, 75, 120), outline="ORANGE", fill="BLACK")
|
||||
draw.ellipse([(34, 79), (46, 91)], outline="ORANGE", fill="ORANGE")
|
||||
draw.rectangle((85, 50, 155, 120), outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(100, 60), (112, 72)], outline="BLACK", fill="BLACK")
|
||||
draw.ellipse([(128, 98), (140, 110)], outline="BLACK", fill="BLACK")
|
||||
draw.rectangle((165, 50, 235, 120), outline="ORANGE", fill="BLACK")
|
||||
draw.ellipse([(180, 60), (192, 72)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(194, 79), (206, 91)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(208, 98), (220, 110)], outline="ORANGE", fill="ORANGE")
|
||||
draw.rectangle((5, 130, 75, 200), outline="ORANGE", fill="BLACK")
|
||||
draw.ellipse([(20, 140), (32, 152)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(20, 174), (32, 186)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(48, 140), (60, 152)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(48, 174), (60, 186)], outline="ORANGE", fill="ORANGE")
|
||||
draw.rectangle((85, 130, 155, 200), outline="ORANGE", fill="BLACK")
|
||||
draw.ellipse([(100, 140), (112, 152)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(100, 178), (112, 190)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(114, 159), (126, 171)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(128, 140), (140, 152)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(128, 178), (140, 190)], outline="ORANGE", fill="ORANGE")
|
||||
draw.rectangle((165, 130, 235, 200), outline="ORANGE", fill="BLACK")
|
||||
draw.ellipse([(180, 140), (192, 152)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(180, 157), (192, 169)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(180, 174), (192, 186)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(208, 140), (220, 152)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(208, 157), (220, 169)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(208, 174), (220, 186)], outline="ORANGE", fill="ORANGE")
|
||||
draw.text((18, 210), "Press Control Stick to Select", fill="ORANGE", font=impact18)
|
||||
|
||||
def drawdi3selected():
|
||||
draw.rectangle((5, 50, 75, 120), outline="ORANGE", fill="BLACK")
|
||||
draw.ellipse([(34, 79), (46, 91)], outline="ORANGE", fill="ORANGE")
|
||||
draw.rectangle((85, 50, 155, 120), outline="ORANGE", fill="BLACK")
|
||||
draw.ellipse([(100, 60), (112, 72)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(128, 98), (140, 110)], outline="ORANGE", fill="ORANGE")
|
||||
draw.rectangle((165, 50, 235, 120), outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(180, 60), (192, 72)], outline="BLACK", fill="BLACK")
|
||||
draw.ellipse([(194, 79), (206, 91)], outline="BLACK", fill="BLACK")
|
||||
draw.ellipse([(208, 98), (220, 110)], outline="BLACK", fill="BLACK")
|
||||
draw.rectangle((5, 130, 75, 200), outline="ORANGE", fill="BLACK")
|
||||
draw.ellipse([(20, 140), (32, 152)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(20, 174), (32, 186)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(48, 140), (60, 152)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(48, 174), (60, 186)], outline="ORANGE", fill="ORANGE")
|
||||
draw.rectangle((85, 130, 155, 200), outline="ORANGE", fill="BLACK")
|
||||
draw.ellipse([(100, 140), (112, 152)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(100, 178), (112, 190)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(114, 159), (126, 171)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(128, 140), (140, 152)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(128, 178), (140, 190)], outline="ORANGE", fill="ORANGE")
|
||||
draw.rectangle((165, 130, 235, 200), outline="ORANGE", fill="BLACK")
|
||||
draw.ellipse([(180, 140), (192, 152)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(180, 157), (192, 169)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(180, 174), (192, 186)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(208, 140), (220, 152)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(208, 157), (220, 169)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(208, 174), (220, 186)], outline="ORANGE", fill="ORANGE")
|
||||
draw.text((18, 210), "Press Control Stick to Select", fill="ORANGE", font=impact18)
|
||||
|
||||
def drawdi4selected():
|
||||
draw.rectangle((5, 50, 75, 120), outline="ORANGE", fill="BLACK")
|
||||
draw.ellipse([(34, 79), (46, 91)], outline="ORANGE", fill="ORANGE")
|
||||
draw.rectangle((85, 50, 155, 120), outline="ORANGE", fill="BLACK")
|
||||
draw.ellipse([(100, 60), (112, 72)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(128, 98), (140, 110)], outline="ORANGE", fill="ORANGE")
|
||||
draw.rectangle((165, 50, 235, 120), outline="ORANGE", fill="BLACK")
|
||||
draw.ellipse([(180, 60), (192, 72)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(194, 79), (206, 91)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(208, 98), (220, 110)], outline="ORANGE", fill="ORANGE")
|
||||
draw.rectangle((5, 130, 75, 200), outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(20, 140), (32, 152)], outline="BLACK", fill="BLACK")
|
||||
draw.ellipse([(20, 174), (32, 186)], outline="BLACK", fill="BLACK")
|
||||
draw.ellipse([(48, 140), (60, 152)], outline="BLACK", fill="BLACK")
|
||||
draw.ellipse([(48, 174), (60, 186)], outline="BLACK", fill="BLACK")
|
||||
draw.rectangle((85, 130, 155, 200), outline="ORANGE", fill="BLACK")
|
||||
draw.ellipse([(100, 140), (112, 152)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(100, 178), (112, 190)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(114, 159), (126, 171)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(128, 140), (140, 152)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(128, 178), (140, 190)], outline="ORANGE", fill="ORANGE")
|
||||
draw.rectangle((165, 130, 235, 200), outline="ORANGE", fill="BLACK")
|
||||
draw.ellipse([(180, 140), (192, 152)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(180, 157), (192, 169)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(180, 174), (192, 186)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(208, 140), (220, 152)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(208, 157), (220, 169)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(208, 174), (220, 186)], outline="ORANGE", fill="ORANGE")
|
||||
draw.text((18, 210), "Press Control Stick to Select", fill="ORANGE", font=impact18)
|
||||
|
||||
def drawdi5selected():
|
||||
draw.rectangle((5, 50, 75, 120), outline="ORANGE", fill="BLACK")
|
||||
draw.ellipse([(34, 79), (46, 91)], outline="ORANGE", fill="ORANGE")
|
||||
draw.rectangle((85, 50, 155, 120), outline="ORANGE", fill="BLACK")
|
||||
draw.ellipse([(100, 60), (112, 72)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(128, 98), (140, 110)], outline="ORANGE", fill="ORANGE")
|
||||
draw.rectangle((165, 50, 235, 120), outline="ORANGE", fill="BLACK")
|
||||
draw.ellipse([(180, 60), (192, 72)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(194, 79), (206, 91)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(208, 98), (220, 110)], outline="ORANGE", fill="ORANGE")
|
||||
draw.rectangle((5, 130, 75, 200), outline="ORANGE", fill="BLACK")
|
||||
draw.ellipse([(20, 140), (32, 152)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(20, 174), (32, 186)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(48, 140), (60, 152)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(48, 174), (60, 186)], outline="ORANGE", fill="ORANGE")
|
||||
draw.rectangle((85, 130, 155, 200), outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(100, 140), (112, 152)], outline="BLACK", fill="BLACK")
|
||||
draw.ellipse([(100, 178), (112, 190)], outline="BLACK", fill="BLACK")
|
||||
draw.ellipse([(114, 159), (126, 171)], outline="BLACK", fill="BLACK")
|
||||
draw.ellipse([(128, 140), (140, 152)], outline="BLACK", fill="BLACK")
|
||||
draw.ellipse([(128, 178), (140, 190)], outline="BLACK", fill="BLACK")
|
||||
draw.rectangle((165, 130, 235, 200), outline="ORANGE", fill="BLACK")
|
||||
draw.ellipse([(180, 140), (192, 152)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(180, 157), (192, 169)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(180, 174), (192, 186)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(208, 140), (220, 152)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(208, 157), (220, 169)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(208, 174), (220, 186)], outline="ORANGE", fill="ORANGE")
|
||||
draw.text((18, 210), "Press Control Stick to Select", fill="ORANGE", font=impact18)
|
||||
|
||||
def drawdi6selected():
|
||||
draw.rectangle((5, 50, 75, 120), outline="ORANGE", fill="BLACK")
|
||||
draw.ellipse([(34, 79), (46, 91)], outline="ORANGE", fill="ORANGE")
|
||||
draw.rectangle((85, 50, 155, 120), outline="ORANGE", fill="BLACK")
|
||||
draw.ellipse([(100, 60), (112, 72)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(128, 98), (140, 110)], outline="ORANGE", fill="ORANGE")
|
||||
draw.rectangle((165, 50, 235, 120), outline="ORANGE", fill="BLACK")
|
||||
draw.ellipse([(180, 60), (192, 72)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(194, 79), (206, 91)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(208, 98), (220, 110)], outline="ORANGE", fill="ORANGE")
|
||||
draw.rectangle((5, 130, 75, 200), outline="ORANGE", fill="BLACK")
|
||||
draw.ellipse([(20, 140), (32, 152)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(20, 174), (32, 186)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(48, 140), (60, 152)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(48, 174), (60, 186)], outline="ORANGE", fill="ORANGE")
|
||||
draw.rectangle((85, 130, 155, 200), outline="ORANGE", fill="BLACK")
|
||||
draw.ellipse([(100, 140), (112, 152)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(100, 178), (112, 190)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(114, 159), (126, 171)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(128, 140), (140, 152)], outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(128, 178), (140, 190)], outline="ORANGE", fill="ORANGE")
|
||||
draw.rectangle((165, 130, 235, 200), outline="ORANGE", fill="ORANGE")
|
||||
draw.ellipse([(180, 140), (192, 152)], outline="BLACK", fill="BLACK")
|
||||
draw.ellipse([(180, 157), (192, 169)], outline="BLACK", fill="BLACK")
|
||||
draw.ellipse([(180, 174), (192, 186)], outline="BLACK", fill="BLACK")
|
||||
draw.ellipse([(208, 140), (220, 152)], outline="BLACK", fill="BLACK")
|
||||
draw.ellipse([(208, 157), (220, 169)], outline="BLACK", fill="BLACK")
|
||||
draw.ellipse([(208, 174), (220, 186)], outline="BLACK", fill="BLACK")
|
||||
draw.text((18, 210), "Press Control Stick to Select", fill="ORANGE", font=impact18)
|
||||
|
||||
def rollsobtainer():
|
||||
|
||||
rollnumber = 1
|
||||
rollcollectorstring = ""
|
||||
currentdiselected = 1
|
||||
draw.rectangle((0, 0, width, height), outline=0, fill=0)
|
||||
draw.text((45, 5), "Dice roll: " + str(rollnumber) + "/99", fill="ORANGE", font=impact26)
|
||||
drawdi1selected()
|
||||
|
||||
while rollnumber <= 99:
|
||||
if GPIO.input(KEY_RIGHT_PIN) == GPIO.LOW:
|
||||
time.sleep(0.15)
|
||||
if currentdiselected == 2:
|
||||
currentdiselected = 3
|
||||
drawdi3selected()
|
||||
if currentdiselected == 1:
|
||||
currentdiselected = 2
|
||||
drawdi2selected()
|
||||
if currentdiselected == 5:
|
||||
currentdiselected = 6
|
||||
drawdi6selected()
|
||||
if currentdiselected == 4:
|
||||
currentdiselected = 5
|
||||
drawdi5selected()
|
||||
if GPIO.input(KEY_LEFT_PIN) == GPIO.LOW:
|
||||
time.sleep(0.15)
|
||||
if currentdiselected == 2:
|
||||
currentdiselected = 1
|
||||
drawdi1selected()
|
||||
if currentdiselected == 3:
|
||||
currentdiselected = 2
|
||||
drawdi2selected()
|
||||
if currentdiselected == 5:
|
||||
currentdiselected = 4
|
||||
drawdi4selected()
|
||||
if currentdiselected == 6:
|
||||
currentdiselected = 5
|
||||
drawdi5selected()
|
||||
if GPIO.input(KEY_DOWN_PIN) == GPIO.LOW:
|
||||
time.sleep(0.15)
|
||||
if currentdiselected == 1:
|
||||
currentdiselected = 4
|
||||
drawdi4selected()
|
||||
if currentdiselected == 2:
|
||||
currentdiselected = 5
|
||||
drawdi5selected()
|
||||
if currentdiselected == 3:
|
||||
currentdiselected = 6
|
||||
drawdi6selected()
|
||||
if GPIO.input(KEY_UP_PIN) == GPIO.LOW:
|
||||
time.sleep(0.15)
|
||||
if currentdiselected == 4:
|
||||
currentdiselected = 1
|
||||
drawdi1selected()
|
||||
if currentdiselected == 5:
|
||||
currentdiselected = 2
|
||||
drawdi2selected()
|
||||
if currentdiselected == 6:
|
||||
currentdiselected = 3
|
||||
drawdi3selected()
|
||||
if GPIO.input(KEY_PRESS_PIN) == GPIO.LOW:
|
||||
draw.rectangle((0, 0, width, height), outline=0, fill=0)
|
||||
time.sleep(0.15)
|
||||
if currentdiselected == 6:
|
||||
rollcollectorstring = rollcollectorstring + "0"
|
||||
else:
|
||||
rollcollectorstring = rollcollectorstring + str(currentdiselected)
|
||||
print("The roll number is " + str(rollnumber) + " and the die selections are : " + rollcollectorstring)
|
||||
rollnumber = rollnumber + 1
|
||||
if currentdiselected == 1:
|
||||
drawdi1selected()
|
||||
if currentdiselected == 2:
|
||||
drawdi2selected()
|
||||
if currentdiselected == 3:
|
||||
drawdi3selected()
|
||||
if currentdiselected == 4:
|
||||
drawdi4selected()
|
||||
if currentdiselected == 5:
|
||||
drawdi5selected()
|
||||
if currentdiselected == 6:
|
||||
drawdi6selected()
|
||||
if rollnumber < 100:
|
||||
draw.text((45, 5), "Dice roll: " + str(rollnumber) + "/99", fill="ORANGE", font=impact26)
|
||||
disp.ShowImage(image, 0, 0)
|
||||
|
||||
return rollcollectorstring
|
||||
|
||||
|
||||
def getseedfromdice(runstate):
|
||||
localrunstate = runstate
|
||||
|
||||
impact18 = ImageFont.truetype('/usr/share/fonts/truetype/msttcorefonts/Impact.ttf', 18)
|
||||
impact23 = ImageFont.truetype('/usr/share/fonts/truetype/msttcorefonts/Impact.ttf', 23)
|
||||
|
||||
collectedrolls = rollsobtainer()
|
||||
|
||||
entropyinteger = int(collectedrolls, 6)
|
||||
|
||||
rollsinbytes = entropyinteger.to_bytes(32, byteorder="little")
|
||||
|
||||
baddicestring = mnemonic_from_bytes(rollsinbytes)
|
||||
|
||||
wordarray = baddicestring.split()
|
||||
|
||||
wordarray.pop(-1)
|
||||
|
||||
laststring = " ".join(wordarray) + " abandon"
|
||||
|
||||
lastbytes = mnemonic_to_bytes(laststring, ignore_checksum=True)
|
||||
|
||||
correctedlaststring = mnemonic_from_bytes(lastbytes)
|
||||
|
||||
displayarray = correctedlaststring.split()
|
||||
|
||||
firstwordset = True
|
||||
while firstwordset is True:
|
||||
#Display the first 12 words
|
||||
draw.rectangle((0, 0, width, height), outline=0, fill=0)
|
||||
draw.text((55, 2), "Your Seed Is (1/2):", fill="ORANGE", font=impact18)
|
||||
draw.text((2, 40), "1: " + displayarray[0], fill="ORANGE", font=impact23)
|
||||
draw.text((2, 65), "2: " + displayarray[1], fill="ORANGE", font=impact23)
|
||||
draw.text((2, 90), "3: " + displayarray[2], fill="ORANGE", font=impact23)
|
||||
draw.text((2, 115), "4: " + displayarray[3], fill="ORANGE", font=impact23)
|
||||
draw.text((2, 140), "5: " + displayarray[4], fill="ORANGE", font=impact23)
|
||||
draw.text((2, 165), "6: " + displayarray[5], fill="ORANGE", font=impact23)
|
||||
draw.text((120, 40), " 7: " + displayarray[6], fill="ORANGE", font=impact23)
|
||||
draw.text((120, 65), " 8: " + displayarray[7], fill="ORANGE", font=impact23)
|
||||
draw.text((120, 90), " 9: " + displayarray[8], fill="ORANGE", font=impact23)
|
||||
draw.text((120, 115), "10: " + displayarray[9], fill="ORANGE", font=impact23)
|
||||
draw.text((120, 140), "11: " + displayarray[10], fill="ORANGE", font=impact23)
|
||||
draw.text((120, 165), "12: " + displayarray[11], fill="ORANGE", font=impact23)
|
||||
draw.text((55, 210), "RIGHT to Continue", fill="ORANGE", font=impact18)
|
||||
disp.ShowImage(image, 0, 0)
|
||||
|
||||
if GPIO.input(KEY_RIGHT_PIN) == GPIO.LOW:
|
||||
time.sleep(0.25)
|
||||
firstwordset = False
|
||||
|
||||
secondwordset = True
|
||||
while secondwordset is True:
|
||||
# Display the second 12 words
|
||||
draw.rectangle((0, 0, width, height), outline=0, fill=0)
|
||||
draw.text((55, 2), "Your Seed Is (2/2):", fill="ORANGE", font=impact18)
|
||||
draw.text((2, 40), "13: " + displayarray[12], fill="ORANGE", font=impact23)
|
||||
draw.text((2, 65), "14: " + displayarray[13], fill="ORANGE", font=impact23)
|
||||
draw.text((2, 90), "15: " + displayarray[14], fill="ORANGE", font=impact23)
|
||||
draw.text((2, 115), "16: " + displayarray[15], fill="ORANGE", font=impact23)
|
||||
draw.text((2, 140), "17: " + displayarray[16], fill="ORANGE", font=impact23)
|
||||
draw.text((2, 165), "18: " + displayarray[17], fill="ORANGE", font=impact23)
|
||||
draw.text((120, 40), "19: " + displayarray[18], fill="ORANGE", font=impact23)
|
||||
draw.text((120, 65), "20: " + displayarray[19], fill="ORANGE", font=impact23)
|
||||
draw.text((120, 90), "21: " + displayarray[20], fill="ORANGE", font=impact23)
|
||||
draw.text((120, 115), "22: " + displayarray[21], fill="ORANGE", font=impact23)
|
||||
draw.text((120, 140), "23: " + displayarray[22], fill="ORANGE", font=impact23)
|
||||
draw.text((120, 165), "24: " + displayarray[23], fill="ORANGE", font=impact23)
|
||||
draw.text((70, 210), "RIGHT to EXIT", fill="ORANGE", font=impact18)
|
||||
disp.ShowImage(image, 0, 0)
|
||||
|
||||
if GPIO.input(KEY_RIGHT_PIN) == GPIO.LOW:
|
||||
time.sleep(0.25)
|
||||
secondwordset = False
|
||||
|
||||
localrunstate[0] = 0
|
||||
localrunstate[1] = ""
|
||||
|
||||
return localrunstate
|
||||
@@ -0,0 +1,99 @@
|
||||
import ST7789
|
||||
import spidev as SPI
|
||||
import RPi.GPIO as GPIO
|
||||
|
||||
import time
|
||||
import subprocess
|
||||
|
||||
from PIL import Image
|
||||
from PIL import ImageDraw
|
||||
from PIL import ImageFont
|
||||
|
||||
from embit.bip39 import mnemonic_to_bytes
|
||||
from embit.bip39 import mnemonic_from_bytes
|
||||
|
||||
#GPIO define
|
||||
RST_PIN = 25
|
||||
CS_PIN = 8
|
||||
DC_PIN = 24
|
||||
|
||||
KEY_UP_PIN = 6
|
||||
KEY_DOWN_PIN = 19
|
||||
KEY_LEFT_PIN = 5
|
||||
KEY_RIGHT_PIN = 26
|
||||
KEY_PRESS_PIN = 13
|
||||
|
||||
KEY1_PIN = 21
|
||||
KEY2_PIN = 20
|
||||
KEY3_PIN = 16
|
||||
|
||||
RST = 27
|
||||
DC = 25
|
||||
BL = 24
|
||||
bus = 0
|
||||
device = 0
|
||||
|
||||
#init GPIO
|
||||
GPIO.setmode(GPIO.BCM)
|
||||
GPIO.setup(KEY_UP_PIN, GPIO.IN, pull_up_down=GPIO.PUD_UP) # Input with pull-up
|
||||
GPIO.setup(KEY_DOWN_PIN, GPIO.IN, pull_up_down=GPIO.PUD_UP) # Input with pull-up
|
||||
GPIO.setup(KEY_LEFT_PIN, GPIO.IN, pull_up_down=GPIO.PUD_UP) # Input with pull-up
|
||||
GPIO.setup(KEY_RIGHT_PIN, GPIO.IN, pull_up_down=GPIO.PUD_UP) # Input with pull-up
|
||||
GPIO.setup(KEY_PRESS_PIN, GPIO.IN, pull_up_down=GPIO.PUD_UP) # Input with pull-up
|
||||
GPIO.setup(KEY1_PIN, GPIO.IN, pull_up_down=GPIO.PUD_UP) # Input with pull-up
|
||||
GPIO.setup(KEY2_PIN, GPIO.IN, pull_up_down=GPIO.PUD_UP) # Input with pull-up
|
||||
GPIO.setup(KEY3_PIN, GPIO.IN, pull_up_down=GPIO.PUD_UP) # Input with pull-up
|
||||
|
||||
#initialize fonts
|
||||
impact18 = ImageFont.truetype('/usr/share/fonts/truetype/msttcorefonts/Impact.ttf', 18)
|
||||
impact23 = ImageFont.truetype('/usr/share/fonts/truetype/msttcorefonts/Impact.ttf', 23)
|
||||
impact50 = ImageFont.truetype('/usr/share/fonts/truetype/msttcorefonts/Impact.ttf', 50)
|
||||
|
||||
# 240x240 display with hardware SPI:
|
||||
disp = ST7789.ST7789(SPI.SpiDev(bus, device),RST, DC, BL)
|
||||
disp.Init()
|
||||
|
||||
# Create blank image for drawing.
|
||||
# Make sure to create image with mode '1' for 1-bit color.
|
||||
width = 240
|
||||
height = 240
|
||||
image = Image.new('RGB', (width, height))
|
||||
|
||||
# Get drawing object to draw on image.
|
||||
draw = ImageDraw.Draw(image)
|
||||
|
||||
def displayfinalword(word24):
|
||||
finalwordwidth, finalwordheight = draw.textsize(word24, font=impact50)
|
||||
|
||||
draw.rectangle((0, 0, width, height), outline=0, fill=0)
|
||||
|
||||
draw.text((65, 60), "Word 24 is :", fill="ORANGE", font=impact23)
|
||||
draw.text(((240-finalwordwidth)/2, 90), word24, fill="ORANGE", font=impact50)
|
||||
|
||||
draw.text((73, 210), "RIGHT to EXIT", fill="ORANGE", font=impact18)
|
||||
|
||||
disp.ShowImage(image, 0, 0)
|
||||
|
||||
def get_word_24(runstate):
|
||||
localrunstate = runstate
|
||||
|
||||
stringphrase = localrunstate[1] + " abandon"
|
||||
|
||||
bytes = mnemonic_to_bytes(stringphrase, ignore_checksum=True)
|
||||
|
||||
finalseed = mnemonic_from_bytes(bytes)
|
||||
|
||||
splitseed = finalseed.split()
|
||||
|
||||
word24 = splitseed[-1]
|
||||
|
||||
displayword24runstate = 1
|
||||
while displayword24runstate == 1:
|
||||
displayfinalword(word24)
|
||||
if GPIO.input(KEY_RIGHT_PIN) == GPIO.LOW: # button is released
|
||||
time.sleep(0.1)
|
||||
displayword24runstate = 0
|
||||
|
||||
localrunstate[0] = 0
|
||||
localrunstate[1] = ""
|
||||
return localrunstate
|
||||
+678
File diff suppressed because one or more lines are too long
@@ -0,0 +1,170 @@
|
||||
import ST7789
|
||||
import spidev as SPI
|
||||
import RPi.GPIO as GPIO
|
||||
|
||||
import time
|
||||
import subprocess
|
||||
|
||||
from PIL import Image
|
||||
from PIL import ImageDraw
|
||||
from PIL import ImageFont
|
||||
|
||||
from imutils.video import VideoStream
|
||||
from pyzbar import pyzbar
|
||||
import argparse
|
||||
import datetime
|
||||
import imutils
|
||||
import time
|
||||
import cv2
|
||||
|
||||
#GPIO define
|
||||
RST_PIN = 25
|
||||
CS_PIN = 8
|
||||
DC_PIN = 24
|
||||
|
||||
KEY_UP_PIN = 6
|
||||
KEY_DOWN_PIN = 19
|
||||
KEY_LEFT_PIN = 5
|
||||
KEY_RIGHT_PIN = 26
|
||||
KEY_PRESS_PIN = 13
|
||||
|
||||
KEY1_PIN = 21
|
||||
KEY2_PIN = 20
|
||||
KEY3_PIN = 16
|
||||
|
||||
RST = 27
|
||||
DC = 25
|
||||
BL = 24
|
||||
bus = 0
|
||||
device = 0
|
||||
|
||||
#init GPIO
|
||||
GPIO.setmode(GPIO.BCM)
|
||||
GPIO.setup(KEY_UP_PIN, GPIO.IN, pull_up_down=GPIO.PUD_UP) # Input with pull-up
|
||||
GPIO.setup(KEY_DOWN_PIN, GPIO.IN, pull_up_down=GPIO.PUD_UP) # Input with pull-up
|
||||
GPIO.setup(KEY_LEFT_PIN, GPIO.IN, pull_up_down=GPIO.PUD_UP) # Input with pull-up
|
||||
GPIO.setup(KEY_RIGHT_PIN, GPIO.IN, pull_up_down=GPIO.PUD_UP) # Input with pull-up
|
||||
GPIO.setup(KEY_PRESS_PIN, GPIO.IN, pull_up_down=GPIO.PUD_UP) # Input with pull-up
|
||||
GPIO.setup(KEY1_PIN, GPIO.IN, pull_up_down=GPIO.PUD_UP) # Input with pull-up
|
||||
GPIO.setup(KEY2_PIN, GPIO.IN, pull_up_down=GPIO.PUD_UP) # Input with pull-up
|
||||
GPIO.setup(KEY3_PIN, GPIO.IN, pull_up_down=GPIO.PUD_UP) # Input with pull-up
|
||||
|
||||
# 240x240 display with hardware SPI:
|
||||
disp = ST7789.ST7789(SPI.SpiDev(bus, device),RST, DC, BL)
|
||||
disp.Init()
|
||||
|
||||
# Create blank image for drawing.
|
||||
# Make sure to create image with mode '1' for 1-bit color.
|
||||
width = 240
|
||||
height = 240
|
||||
image = Image.new('RGB', (width, height))
|
||||
|
||||
# Get drawing object to draw on image.
|
||||
draw = ImageDraw.Draw(image)
|
||||
|
||||
impact18 = ImageFont.truetype('/usr/share/fonts/truetype/msttcorefonts/Impact.ttf', 18)
|
||||
impact22 = ImageFont.truetype('/usr/share/fonts/truetype/msttcorefonts/Impact.ttf', 22)
|
||||
|
||||
def iotestscreen(runstate):
|
||||
localrunstate = runstate
|
||||
|
||||
draw.rectangle((0,0,width,height), outline=0, fill=0)
|
||||
draw.text((45, 5), "Input/Output Check:", fill="ORANGE", font=impact18)
|
||||
draw.polygon([(61, 89), (80, 46), (99, 89)], outline="ORANGE", fill=0)
|
||||
draw.polygon([(51, 100), (8, 119), (51, 138)], outline="ORANGE", fill=0)
|
||||
draw.polygon([(109, 100), (152, 119), (109, 138)], outline="ORANGE", fill=0)
|
||||
draw.polygon([(61, 151), (80, 193), (99, 151)], outline="ORANGE", fill=0)
|
||||
draw.ellipse([(61, 99), (99, 141)], outline="ORANGE", fill=0)
|
||||
draw.ellipse([(198, 40), (238, 80)], outline="ORANGE", fill=0)
|
||||
draw.ellipse([(198, 95), (238, 135)], outline="ORANGE", fill=0)
|
||||
draw.text((200, 160), "EXIT", fill="ORANGE", font=impact18)
|
||||
prescantext = "Scan ANY QR Code"
|
||||
textwidth, textheight = draw.textsize(prescantext, font=impact22)
|
||||
draw.text(((240 - textwidth) / 2, 205), prescantext, fill="ORANGE", font=impact22)
|
||||
disp.ShowImage(image, 0, 0)
|
||||
|
||||
running = True
|
||||
|
||||
scannedqrs = 0
|
||||
vs = VideoStream(usePiCamera=True).start() # For Pi Camera
|
||||
time.sleep(2.0)
|
||||
|
||||
while running == True:
|
||||
frame = vs.read()
|
||||
frame = imutils.resize(frame, width=400)
|
||||
barcodes = pyzbar.decode(frame)
|
||||
for barcode in barcodes:
|
||||
scannedqrs += 1
|
||||
#time.sleep(0.1)
|
||||
#time.sleep(0.05)
|
||||
|
||||
draw.rectangle((0, 0, width, height), outline=0, fill=0)
|
||||
draw.text((45, 5), "Input/Output Check:", fill="ORANGE", font=impact18)
|
||||
|
||||
if GPIO.input(KEY_UP_PIN) == GPIO.LOW: # button is released
|
||||
#time.sleep(0.1)
|
||||
draw.polygon([(61, 89), (80, 46), (99, 89)], outline="ORANGE", fill="ORANGE")
|
||||
else: # button is pressed:
|
||||
draw.polygon([(61, 89), (80, 46), (99, 89)], outline="ORANGE", fill=0)
|
||||
|
||||
if GPIO.input(KEY_LEFT_PIN) == GPIO.LOW: # button is released
|
||||
#time.sleep(0.1)
|
||||
draw.polygon([(51, 100), (8, 119), (51, 138)], outline="ORANGE", fill="ORANGE")
|
||||
else: # button is pressed:
|
||||
draw.polygon([(51, 100), (8, 119), (51, 138)], outline="ORANGE", fill=0)
|
||||
|
||||
if GPIO.input(KEY_RIGHT_PIN) == GPIO.LOW: # button is released
|
||||
#time.sleep(0.1)
|
||||
draw.polygon([(109, 100), (152, 119), (109, 138)], outline="ORANGE", fill="ORANGE")
|
||||
else: # button is pressed:
|
||||
draw.polygon([(109, 100), (152, 119), (109, 138)], outline="ORANGE", fill=0)
|
||||
|
||||
if GPIO.input(KEY_DOWN_PIN) == GPIO.LOW: # button is released
|
||||
#time.sleep(0.1)
|
||||
draw.polygon([(61, 151), (80, 193), (99, 151)], outline="ORANGE", fill="ORANGE")
|
||||
else: # button is pressed:
|
||||
draw.polygon([(61, 151), (80, 193), (99, 151)], outline="ORANGE", fill=0)
|
||||
|
||||
if GPIO.input(KEY_PRESS_PIN) == GPIO.LOW: # button is released
|
||||
#time.sleep(0.1)
|
||||
draw.ellipse([(61, 99), (99, 141)], outline="ORANGE", fill="ORANGE")
|
||||
else: # button is pressed:
|
||||
draw.ellipse([(61, 99), (99, 141)], outline="ORANGE", fill=0)
|
||||
|
||||
if GPIO.input(KEY1_PIN) == GPIO.LOW: # button is released
|
||||
#time.sleep(0.1)
|
||||
draw.ellipse([(198, 40), (238, 80)], outline="ORANGE", fill="ORANGE")
|
||||
else: # button is pressed:
|
||||
draw.ellipse([(198, 40), (238, 80)], outline="ORANGE", fill=0)
|
||||
|
||||
if GPIO.input(KEY2_PIN) == GPIO.LOW: # button is released
|
||||
#time.sleep(0.1)
|
||||
draw.ellipse([(198, 95), (238, 135)], outline="ORANGE", fill="ORANGE")
|
||||
else: # button is pressed:
|
||||
draw.ellipse([(198, 95), (238, 135)], outline="ORANGE", fill=0)
|
||||
|
||||
draw.text((200, 160), "EXIT", fill="ORANGE", font=impact18)
|
||||
|
||||
scansuccesstext = "QR code scanned!"
|
||||
if scannedqrs == 0:
|
||||
textwidth, textheight = draw.textsize(prescantext, font=impact22)
|
||||
draw.text(((240-textwidth)/2, 205), prescantext, fill="ORANGE", font=impact22)
|
||||
elif scannedqrs % 2 == 1:
|
||||
textwidth, textheight = draw.textsize(scansuccesstext, font=impact22)
|
||||
draw.rectangle((30, 205, 210, 235), outline="ORANGE", fill="ORANGE")
|
||||
draw.text(((240 - textwidth) / 2, 205), scansuccesstext, fill="BLACK", font=impact22)
|
||||
elif scannedqrs % 2 == 0:
|
||||
textwidth, textheight = draw.textsize(scansuccesstext, font=impact22)
|
||||
draw.rectangle((30, 205, 210, 235), outline="ORANGE", fill="BLACK")
|
||||
draw.text(((240 - textwidth) / 2, 205), scansuccesstext, fill="ORANGE", font=impact22)
|
||||
|
||||
if GPIO.input(KEY3_PIN) == GPIO.LOW: # button is released
|
||||
time.sleep(0.4)
|
||||
vs.stop()
|
||||
running = False
|
||||
localrunstate[0] = 3
|
||||
return localrunstate
|
||||
|
||||
disp.ShowImage(image,0,0)
|
||||
|
||||
print("You exited the i o test module")
|
||||
@@ -0,0 +1,36 @@
|
||||
import menus
|
||||
import iotest
|
||||
import getwords
|
||||
import getword24
|
||||
import dice
|
||||
import xpubmake
|
||||
import psbtsign
|
||||
|
||||
runstate = [0, ""]
|
||||
seedsignerrunning = True
|
||||
|
||||
while seedsignerrunning == True:
|
||||
if runstate[0] == 0:
|
||||
menus.main_menu(runstate)
|
||||
if runstate[0] == 1:
|
||||
menus.seedgen_menu(runstate)
|
||||
if runstate[0] == 2:
|
||||
menus.signing_menu(runstate)
|
||||
if runstate[0] == 3:
|
||||
menus.settings_menu(runstate)
|
||||
if runstate[0] == 50:
|
||||
iotest.iotestscreen(runstate)
|
||||
if runstate[0] == 51:
|
||||
getwords.gather_23_words(runstate)
|
||||
if runstate[0] == 52:
|
||||
getword24.get_word_24(runstate)
|
||||
if runstate[0] == 53:
|
||||
dice.getseedfromdice(runstate)
|
||||
if runstate[0] == 54:
|
||||
xpubmake.make_xpub(runstate)
|
||||
if runstate[0] == 55:
|
||||
psbtsign.sign_psbt(runstate)
|
||||
if runstate[0] == 56:
|
||||
menus.donate(runstate)
|
||||
if runstate[0] == 57:
|
||||
menus.version_info(runstate)
|
||||
@@ -0,0 +1,518 @@
|
||||
import ST7789
|
||||
import spidev as SPI
|
||||
import RPi.GPIO as GPIO
|
||||
|
||||
import time
|
||||
import subprocess
|
||||
|
||||
from PIL import Image
|
||||
from PIL import ImageDraw
|
||||
from PIL import ImageFont
|
||||
|
||||
from subprocess import call
|
||||
|
||||
import qrcode
|
||||
|
||||
#GPIO define
|
||||
RST_PIN = 25
|
||||
CS_PIN = 8
|
||||
DC_PIN = 24
|
||||
|
||||
KEY_UP_PIN = 6
|
||||
KEY_DOWN_PIN = 19
|
||||
KEY_LEFT_PIN = 5
|
||||
KEY_RIGHT_PIN = 26
|
||||
KEY_PRESS_PIN = 13
|
||||
|
||||
KEY1_PIN = 21
|
||||
KEY2_PIN = 20
|
||||
KEY3_PIN = 16
|
||||
|
||||
RST = 27
|
||||
DC = 25
|
||||
BL = 24
|
||||
bus = 0
|
||||
device = 0
|
||||
|
||||
#init GPIO
|
||||
GPIO.setmode(GPIO.BCM)
|
||||
GPIO.setup(KEY_UP_PIN, GPIO.IN, pull_up_down=GPIO.PUD_UP) # Input with pull-up
|
||||
GPIO.setup(KEY_DOWN_PIN, GPIO.IN, pull_up_down=GPIO.PUD_UP) # Input with pull-up
|
||||
GPIO.setup(KEY_LEFT_PIN, GPIO.IN, pull_up_down=GPIO.PUD_UP) # Input with pull-up
|
||||
GPIO.setup(KEY_RIGHT_PIN, GPIO.IN, pull_up_down=GPIO.PUD_UP) # Input with pull-up
|
||||
GPIO.setup(KEY_PRESS_PIN, GPIO.IN, pull_up_down=GPIO.PUD_UP) # Input with pull-up
|
||||
GPIO.setup(KEY1_PIN, GPIO.IN, pull_up_down=GPIO.PUD_UP) # Input with pull-up
|
||||
GPIO.setup(KEY2_PIN, GPIO.IN, pull_up_down=GPIO.PUD_UP) # Input with pull-up
|
||||
GPIO.setup(KEY3_PIN, GPIO.IN, pull_up_down=GPIO.PUD_UP) # Input with pull-up
|
||||
|
||||
# 240x240 display with hardware SPI:
|
||||
disp = ST7789.ST7789(SPI.SpiDev(bus, device),RST, DC, BL)
|
||||
disp.Init()
|
||||
|
||||
# Create blank image for drawing.
|
||||
# Make sure to create image with mode '1' for 1-bit color.
|
||||
width = 240
|
||||
height = 240
|
||||
image = Image.new('RGB', (width, height))
|
||||
|
||||
# Get drawing object to draw on image.
|
||||
draw = ImageDraw.Draw(image)
|
||||
|
||||
impact16 = ImageFont.truetype('/usr/share/fonts/truetype/msttcorefonts/Impact.ttf', 16)
|
||||
impact18 = ImageFont.truetype('/usr/share/fonts/truetype/msttcorefonts/Impact.ttf', 18)
|
||||
impact20 = ImageFont.truetype('/usr/share/fonts/truetype/msttcorefonts/Impact.ttf', 20)
|
||||
impact22 = ImageFont.truetype('/usr/share/fonts/truetype/msttcorefonts/Impact.ttf', 22)
|
||||
|
||||
def menu_elevator(selected, numoptions):
|
||||
if GPIO.input(KEY_UP_PIN) == GPIO.LOW:
|
||||
if selected == 1:
|
||||
selected = numoptions
|
||||
time.sleep(0.2)
|
||||
else:
|
||||
selected = selected - 1
|
||||
time.sleep(0.2)
|
||||
print("The menu state is: " + str(selected))
|
||||
|
||||
if GPIO.input(KEY_DOWN_PIN) == GPIO.LOW:
|
||||
if selected == numoptions:
|
||||
selected = 1
|
||||
time.sleep(0.2)
|
||||
else:
|
||||
selected = selected + 1
|
||||
time.sleep(0.2)
|
||||
print("The menu state is: " + str(selected))
|
||||
|
||||
return selected
|
||||
|
||||
def powering_down_notifier():
|
||||
draw.rectangle((0, 0, width, height), outline=0, fill=0)
|
||||
|
||||
line1 = "Powering Down..."
|
||||
line2 = "Please wait about"
|
||||
line3 = "30 seconds before"
|
||||
line4 = "disconnecting power."
|
||||
|
||||
textwidth, textheight = draw.textsize(line1, font=impact22)
|
||||
draw.text(((240-textwidth)/2, 45), line1, fill="ORANGE", font=impact22)
|
||||
textwidth, textheight = draw.textsize(line2, font=impact20)
|
||||
draw.text(((240-textwidth)/2, 100), line2, fill="ORANGE", font=impact20)
|
||||
textwidth, textheight = draw.textsize(line3, font=impact20)
|
||||
draw.text(((240-textwidth)/2, 130), line3, fill="ORANGE", font=impact20)
|
||||
textwidth, textheight = draw.textsize(line4, font=impact20)
|
||||
draw.text(((240-textwidth)/2, 160), line4, fill="ORANGE", font=impact20)
|
||||
disp.ShowImage(image, 0, 0)
|
||||
|
||||
#MAIN MENU FUNCTIONS BELOW
|
||||
#MAIN MENU FUNCTIONS BELOW
|
||||
#MAIN MENU FUNCTIONS BELOW
|
||||
|
||||
def main_option1():
|
||||
draw.rectangle((0, 0, width, height), outline=0, fill=0)
|
||||
draw.text((35, 2), "SeedSigner v0.1.0", fill="ORANGE", font=impact22)
|
||||
draw.rectangle((5, 40, 210, 75), outline=0, fill="ORANGE")
|
||||
draw.text((15, 45), "Seed Generation Tools", fill="BLACK", font=impact20)
|
||||
#draw.rectangle((5, 75, 210, 110), outline=0, fill="ORANGE")
|
||||
draw.text((15, 80), "Signing Tools", fill="ORANGE", font=impact20)
|
||||
#draw.rectangle((5, 110, 210, 145), outline=0, fill="ORANGE")
|
||||
draw.text((15, 115), "Settings", fill="ORANGE", font=impact20)
|
||||
#draw.rectangle((5, 145, 210, 170), outline=0, fill="ORANGE")
|
||||
draw.text((15, 150), "Power OFF Device", fill="ORANGE", font=impact20)
|
||||
draw.text((18, 210), "Press Control Stick to Select", fill="ORANGE", font=impact18)
|
||||
disp.ShowImage(image, 0, 0)
|
||||
|
||||
def main_option2():
|
||||
draw.rectangle((0, 0, width, height), outline=0, fill=0)
|
||||
draw.text((35, 2), "SeedSigner v0.1.0", fill="ORANGE", font=impact22)
|
||||
#draw.rectangle((5, 40, 210, 75), outline=0, fill="ORANGE")
|
||||
draw.text((15, 45), "Seed Generation Tools", fill="ORANGE", font=impact20)
|
||||
draw.rectangle((5, 75, 210, 110), outline=0, fill="ORANGE")
|
||||
draw.text((15, 80), "Signing Tools", fill="BLACK", font=impact20)
|
||||
#draw.rectangle((5, 110, 210, 145), outline=0, fill="ORANGE")
|
||||
draw.text((15, 115), "Settings", fill="ORANGE", font=impact20)
|
||||
#draw.rectangle((5, 145, 210, 170), outline=0, fill="ORANGE")
|
||||
draw.text((15, 150), "Power OFF Device", fill="ORANGE", font=impact20)
|
||||
draw.text((18, 210), "Press Control Stick to Select", fill="ORANGE", font=impact18)
|
||||
disp.ShowImage(image, 0, 0)
|
||||
|
||||
def main_option3():
|
||||
draw.rectangle((0, 0, width, height), outline=0, fill=0)
|
||||
draw.text((35, 2), "SeedSigner v0.1.0", fill="ORANGE", font=impact22)
|
||||
#draw.rectangle((5, 40, 210, 75), outline=0, fill="ORANGE")
|
||||
draw.text((15, 45), "Seed Generation Tools", fill="ORANGE", font=impact20)
|
||||
#draw.rectangle((5, 75, 210, 110), outline=0, fill="ORANGE")
|
||||
draw.text((15, 80), "Signing Tools", fill="ORANGE", font=impact20)
|
||||
draw.rectangle((5, 110, 210, 145), outline=0, fill="ORANGE")
|
||||
draw.text((15, 115), "Settings", fill="BLACK", font=impact20)
|
||||
#draw.rectangle((5, 145, 210, 170), outline=0, fill="ORANGE")
|
||||
draw.text((15, 150), "Power OFF Device", fill="ORANGE", font=impact20)
|
||||
draw.text((18, 210), "Press Control Stick to Select", fill="ORANGE", font=impact18)
|
||||
disp.ShowImage(image, 0, 0)
|
||||
|
||||
def main_option4():
|
||||
draw.rectangle((0, 0, width, height), outline=0, fill=0)
|
||||
draw.text((35, 2), "SeedSigner v0.1.0", fill="ORANGE", font=impact22)
|
||||
#draw.rectangle((5, 40, 210, 75), outline=0, fill="ORANGE")
|
||||
draw.text((15, 45), "Seed Generation Tools", fill="ORANGE", font=impact20)
|
||||
#draw.rectangle((5, 75, 210, 110), outline=0, fill="ORANGE")
|
||||
draw.text((15, 80), "Signing Tools", fill="ORANGE", font=impact20)
|
||||
#draw.rectangle((5, 110, 210, 145), outline=0, fill="ORANGE")
|
||||
draw.text((15, 115), "Settings", fill="ORANGE", font=impact20)
|
||||
draw.rectangle((5, 145, 210, 180), outline=0, fill="ORANGE")
|
||||
draw.text((15, 150), "Power OFF Device", fill="BLACK", font=impact20)
|
||||
draw.text((18, 210), "Press Control Stick to Select", fill="ORANGE", font=impact18)
|
||||
disp.ShowImage(image, 0, 0)
|
||||
|
||||
def main_menu(runstate):
|
||||
localrunstate = runstate
|
||||
running = True
|
||||
optionselected = 1
|
||||
while running == True:
|
||||
optionselected = menu_elevator(optionselected, 4)
|
||||
if optionselected == 1:
|
||||
main_option1()
|
||||
if optionselected == 2:
|
||||
main_option2()
|
||||
if optionselected == 3:
|
||||
main_option3()
|
||||
if optionselected == 4:
|
||||
main_option4()
|
||||
if GPIO.input(KEY_PRESS_PIN) == GPIO.LOW:
|
||||
if optionselected == 1:
|
||||
time.sleep(0.2)
|
||||
running = False
|
||||
localrunstate[0] = 1
|
||||
return localrunstate
|
||||
if optionselected == 2:
|
||||
time.sleep(0.2)
|
||||
running = False
|
||||
localrunstate[0] = 2
|
||||
return localrunstate
|
||||
if optionselected == 3:
|
||||
time.sleep(0.2)
|
||||
running = False
|
||||
localrunstate[0] = 3
|
||||
return localrunstate
|
||||
if optionselected == 4:
|
||||
time.sleep(0.2)
|
||||
running = False
|
||||
localrunstate[0] = 3
|
||||
powering_down_notifier()
|
||||
call("sudo shutdown --poweroff now", shell=True)
|
||||
|
||||
|
||||
# SETTINGS MENU FUNCTIONS BELOW
|
||||
# SETTINGS MENU FUNCTIONS BELOW
|
||||
# SETTINGS MENU FUNCTIONS BELOW
|
||||
|
||||
def settings_option1():
|
||||
draw.rectangle((0, 0, width, height), outline=0, fill=0)
|
||||
draw.text((85, 2), "Settings", fill="ORANGE", font=impact20)
|
||||
draw.rectangle((5, 40, 210, 75), outline=0, fill="ORANGE")
|
||||
draw.text((15, 45), "Input / Output Tests", fill="BLACK", font=impact20)
|
||||
#draw.rectangle((5, 75, 210, 110), outline=0, fill="ORANGE")
|
||||
draw.text((15, 80), "Version Info", fill="ORANGE", font=impact20)
|
||||
# draw.rectangle((5, 110, 210, 145), outline=0, fill="ORANGE")
|
||||
draw.text((15, 115), "Donate to SeedSigner", fill="ORANGE", font=impact20)
|
||||
# draw.rectangle((5, 145, 210, 180), outline=0, fill="ORANGE")
|
||||
draw.text((15, 150), "... ( return to MAIN )", fill="ORANGE", font=impact20)
|
||||
draw.text((18, 210), "Press Control Stick to Select", fill="ORANGE", font=impact18)
|
||||
disp.ShowImage(image, 0, 0)
|
||||
|
||||
def settings_option2():
|
||||
draw.rectangle((0, 0, width, height), outline=0, fill=0)
|
||||
draw.text((85, 2), "Settings", fill="ORANGE", font=impact20)
|
||||
#draw.rectangle((5, 40, 210, 75), outline=0, fill="ORANGE")
|
||||
draw.text((15, 45), "Input / Output Tests", fill="ORANGE", font=impact20)
|
||||
draw.rectangle((5, 75, 210, 110), outline=0, fill="ORANGE")
|
||||
draw.text((15, 80), "Version Info", fill="BLACK", font=impact20)
|
||||
# draw.rectangle((5, 110, 210, 145), outline=0, fill="ORANGE")
|
||||
draw.text((15, 115), "Donate to SeedSigner", fill="ORANGE", font=impact20)
|
||||
# draw.rectangle((5, 145, 210, 180), outline=0, fill="ORANGE")
|
||||
draw.text((15, 150), "... ( return to MAIN )", fill="ORANGE", font=impact20)
|
||||
draw.text((18, 210), "Press Control Stick to Select", fill="ORANGE", font=impact18)
|
||||
disp.ShowImage(image, 0, 0)
|
||||
|
||||
def settings_option3():
|
||||
draw.rectangle((0, 0, width, height), outline=0, fill=0)
|
||||
draw.text((85, 2), "Settings", fill="ORANGE", font=impact20)
|
||||
#draw.rectangle((5, 40, 210, 75), outline=0, fill="ORANGE")
|
||||
draw.text((15, 45), "Input / Output Tests", fill="ORANGE", font=impact20)
|
||||
#draw.rectangle((5, 75, 210, 110), outline=0, fill="ORANGE")
|
||||
draw.text((15, 80), "Version Info", fill="ORANGE", font=impact20)
|
||||
draw.rectangle((5, 110, 210, 145), outline=0, fill="ORANGE")
|
||||
draw.text((15, 115), "Donate to SeedSigner", fill="BLACK", font=impact20)
|
||||
# draw.rectangle((5, 145, 210, 180), outline=0, fill="ORANGE")
|
||||
draw.text((15, 150), "... ( return to MAIN )", fill="ORANGE", font=impact20)
|
||||
draw.text((18, 210), "Press Control Stick to Select", fill="ORANGE", font=impact18)
|
||||
disp.ShowImage(image, 0, 0)
|
||||
|
||||
def settings_option4():
|
||||
draw.rectangle((0, 0, width, height), outline=0, fill=0)
|
||||
draw.text((85, 2), "Settings", fill="ORANGE", font=impact20)
|
||||
#draw.rectangle((5, 40, 210, 75), outline=0, fill="ORANGE")
|
||||
draw.text((15, 45), "Input / Output Tests", fill="ORANGE", font=impact20)
|
||||
#draw.rectangle((5, 75, 210, 110), outline=0, fill="ORANGE")
|
||||
draw.text((15, 80), "Version Info", fill="ORANGE", font=impact20)
|
||||
#draw.rectangle((5, 110, 210, 145), outline=0, fill="ORANGE")
|
||||
draw.text((15, 115), "Donate to SeedSigner", fill="ORANGE", font=impact20)
|
||||
draw.rectangle((5, 145, 210, 180), outline=0, fill="ORANGE")
|
||||
draw.text((15, 150), "... ( return to MAIN )", fill="BLACK", font=impact20)
|
||||
draw.text((18, 210), "Press Control Stick to Select", fill="ORANGE", font=impact18)
|
||||
disp.ShowImage(image, 0, 0)
|
||||
|
||||
def settings_menu(runstate):
|
||||
localrunstate = runstate
|
||||
running = True
|
||||
optionselected = 1
|
||||
while running == True:
|
||||
optionselected = menu_elevator(optionselected, 4)
|
||||
if optionselected == 1:
|
||||
settings_option1()
|
||||
if optionselected == 2:
|
||||
settings_option2()
|
||||
if optionselected == 3:
|
||||
settings_option3()
|
||||
if optionselected == 4:
|
||||
settings_option4()
|
||||
if GPIO.input(KEY_PRESS_PIN) == GPIO.LOW:
|
||||
if optionselected == 1:
|
||||
time.sleep(0.2)
|
||||
running = False
|
||||
localrunstate[0] = 50
|
||||
return localrunstate
|
||||
if optionselected == 2:
|
||||
time.sleep(0.2)
|
||||
running = False
|
||||
localrunstate[0] = 57
|
||||
return localrunstate
|
||||
if optionselected == 3:
|
||||
time.sleep(0.2)
|
||||
running = False
|
||||
localrunstate[0] = 56
|
||||
return localrunstate
|
||||
if optionselected == 4:
|
||||
time.sleep(0.2)
|
||||
running = False
|
||||
localrunstate[0] = 0
|
||||
return localrunstate
|
||||
|
||||
#SEED GENERATION TOOLS MENU
|
||||
#SEED GENERATION TOOLS MENU
|
||||
#SEED GENERATION TOOLS MENU
|
||||
|
||||
def seedgen_menu_option1():
|
||||
draw.rectangle((0, 0, width, height), outline=0, fill=0)
|
||||
draw.text((25, 2), "Seed Generation Tools", fill="ORANGE", font=impact20)
|
||||
draw.rectangle((5, 40, 210, 75), outline=0, fill="ORANGE")
|
||||
draw.text((15, 45), "Generate Word 24", fill="BLACK", font=impact20)
|
||||
#draw.rectangle((5, 75, 210, 110), outline=0, fill="ORANGE")
|
||||
draw.text((15, 80), "Create a Seed w/ Dice", fill="ORANGE", font=impact20)
|
||||
# draw.rectangle((5, 110, 210, 145), outline=0, fill="ORANGE")
|
||||
draw.text((15, 115), "... ( return to MAIN )", fill="ORANGE", font=impact20)
|
||||
draw.text((18, 210), "Press Control Stick to Select", fill="ORANGE", font=impact18)
|
||||
disp.ShowImage(image, 0, 0)
|
||||
|
||||
def seedgen_menu_option2():
|
||||
draw.rectangle((0, 0, width, height), outline=0, fill=0)
|
||||
draw.text((25, 2), "Seed Generation Tools", fill="ORANGE", font=impact20)
|
||||
#draw.rectangle((5, 40, 210, 75), outline=0, fill="ORANGE")
|
||||
draw.text((15, 45), "Generate Word 24", fill="ORANGE", font=impact20)
|
||||
draw.rectangle((5, 75, 210, 110), outline=0, fill="ORANGE")
|
||||
draw.text((15, 80), "Create a Seed w/ Dice", fill="BLACK", font=impact20)
|
||||
# draw.rectangle((5, 110, 210, 145), outline=0, fill="ORANGE")
|
||||
draw.text((15, 115), "... ( return to MAIN )", fill="ORANGE", font=impact20)
|
||||
draw.text((18, 210), "Press Control Stick to Select", fill="ORANGE", font=impact18)
|
||||
disp.ShowImage(image, 0, 0)
|
||||
|
||||
def seedgen_menu_option3():
|
||||
draw.rectangle((0, 0, width, height), outline=0, fill=0)
|
||||
draw.text((25, 2), "Seed Generation Tools", fill="ORANGE", font=impact20)
|
||||
#draw.rectangle((5, 40, 210, 75), outline=0, fill="ORANGE")
|
||||
draw.text((15, 45), "Generate Word 24", fill="ORANGE", font=impact20)
|
||||
#draw.rectangle((5, 75, 210, 110), outline=0, fill="ORANGE")
|
||||
draw.text((15, 80), "Create a Seed w/ Dice", fill="ORANGE", font=impact20)
|
||||
draw.rectangle((5, 110, 210, 145), outline=0, fill="ORANGE")
|
||||
draw.text((15, 115), "... ( return to MAIN )", fill="BLACK", font=impact20)
|
||||
draw.text((18, 210), "Press Control Stick to Select", fill="ORANGE", font=impact18)
|
||||
disp.ShowImage(image, 0, 0)
|
||||
|
||||
def seedgen_menu(runstate):
|
||||
localrunstate = runstate
|
||||
running = True
|
||||
optionselected = 1
|
||||
while running == True:
|
||||
optionselected = menu_elevator(optionselected, 3)
|
||||
if optionselected == 1:
|
||||
seedgen_menu_option1()
|
||||
if optionselected == 2:
|
||||
seedgen_menu_option2()
|
||||
if optionselected == 3:
|
||||
seedgen_menu_option3()
|
||||
if GPIO.input(KEY_PRESS_PIN) == GPIO.LOW:
|
||||
if optionselected == 1:
|
||||
time.sleep(0.2)
|
||||
running = False
|
||||
localrunstate[0] = 51
|
||||
return localrunstate
|
||||
if optionselected == 2:
|
||||
time.sleep(0.2)
|
||||
running = False
|
||||
localrunstate[0] = 53
|
||||
return localrunstate
|
||||
if optionselected == 3:
|
||||
time.sleep(0.2)
|
||||
running = False
|
||||
localrunstate[0] = 0
|
||||
return localrunstate
|
||||
|
||||
#SIGNING TOOLS MENU
|
||||
#SIGNING TOOLS MENU
|
||||
#SIGNING TOOLS MENU
|
||||
|
||||
def signing_menu_option1():
|
||||
draw.rectangle((0, 0, width, height), outline=0, fill=0)
|
||||
draw.text((60, 2), "Signing Tools", fill="ORANGE", font=impact20)
|
||||
draw.rectangle((5, 40, 210, 75), outline=0, fill="ORANGE")
|
||||
draw.text((15, 45), "Generate XPUB", fill="BLACK", font=impact20)
|
||||
#draw.rectangle((5, 75, 210, 110), outline=0, fill="ORANGE")
|
||||
draw.text((15, 80), "Sign a Transaction", fill="ORANGE", font=impact20)
|
||||
# draw.rectangle((5, 110, 210, 145), outline=0, fill="ORANGE")
|
||||
draw.text((15, 115), "... ( return to MAIN )", fill="ORANGE", font=impact20)
|
||||
draw.text((18, 210), "Press Control Stick to Select", fill="ORANGE", font=impact18)
|
||||
disp.ShowImage(image, 0, 0)
|
||||
|
||||
def signing_menu_option2():
|
||||
draw.rectangle((0, 0, width, height), outline=0, fill=0)
|
||||
draw.text((60, 2), "Signing Tools", fill="ORANGE", font=impact20)
|
||||
#draw.rectangle((5, 40, 210, 75), outline=0, fill="ORANGE")
|
||||
draw.text((15, 45), "Generate XPUB", fill="ORANGE", font=impact20)
|
||||
draw.rectangle((5, 75, 210, 110), outline=0, fill="ORANGE")
|
||||
draw.text((15, 80), "Sign a Transaction", fill="BLACK", font=impact20)
|
||||
# draw.rectangle((5, 110, 210, 145), outline=0, fill="ORANGE")
|
||||
draw.text((15, 115), "... ( return to MAIN )", fill="ORANGE", font=impact20)
|
||||
draw.text((18, 210), "Press Control Stick to Select", fill="ORANGE", font=impact18)
|
||||
disp.ShowImage(image, 0, 0)
|
||||
|
||||
def signing_menu_option3():
|
||||
draw.rectangle((0, 0, width, height), outline=0, fill=0)
|
||||
draw.text((60, 2), "Signing Tools", fill="ORANGE", font=impact20)
|
||||
#draw.rectangle((5, 40, 210, 75), outline=0, fill="ORANGE")
|
||||
draw.text((15, 45), "Generate XPUB", fill="ORANGE", font=impact20)
|
||||
#draw.rectangle((5, 75, 210, 110), outline=0, fill="ORANGE")
|
||||
draw.text((15, 80), "Sign a Transaction", fill="ORANGE", font=impact20)
|
||||
draw.rectangle((5, 110, 210, 145), outline=0, fill="ORANGE")
|
||||
draw.text((15, 115), "... ( return to MAIN )", fill="BLACK", font=impact20)
|
||||
draw.text((18, 210), "Press Control Stick to Select", fill="ORANGE", font=impact18)
|
||||
disp.ShowImage(image, 0, 0)
|
||||
|
||||
def signing_menu(runstate):
|
||||
localrunstate = runstate
|
||||
running = True
|
||||
optionselected = 1
|
||||
while running == True:
|
||||
optionselected = menu_elevator(optionselected, 3)
|
||||
if optionselected == 1:
|
||||
signing_menu_option1()
|
||||
if optionselected == 2:
|
||||
signing_menu_option2()
|
||||
if optionselected == 3:
|
||||
signing_menu_option3()
|
||||
if GPIO.input(KEY_PRESS_PIN) == GPIO.LOW:
|
||||
if optionselected == 1:
|
||||
time.sleep(0.2)
|
||||
running = False
|
||||
localrunstate[0] = 54
|
||||
return localrunstate
|
||||
if optionselected == 2:
|
||||
time.sleep(0.2)
|
||||
running = False
|
||||
localrunstate[0] = 55
|
||||
return localrunstate
|
||||
if optionselected == 3:
|
||||
time.sleep(0.2)
|
||||
running = False
|
||||
localrunstate[0] = 0
|
||||
return localrunstate
|
||||
|
||||
#DONATE MENU
|
||||
#DONATE MENU
|
||||
#DONATE MENU
|
||||
|
||||
def donate(runstate):
|
||||
localrunstate = runstate
|
||||
|
||||
running1 = True
|
||||
running2 = True
|
||||
while running1 == True:
|
||||
line1 = "You can support"
|
||||
line2 = "SeedSigner by donating"
|
||||
line3 = "any amount of BTC."
|
||||
line4 = "Thank You!!!"
|
||||
line5 = "(Press right for a QR code)"
|
||||
|
||||
draw.rectangle((0, 0, width, height), outline=0, fill=0)
|
||||
textwidth, textheight = draw.textsize(line1, font=impact22)
|
||||
draw.text(((240 - textwidth) / 2, 20), line1, fill="ORANGE", font=impact22)
|
||||
textwidth, textheight = draw.textsize(line2, font=impact22)
|
||||
draw.text(((240 - textwidth) / 2, 55), line2, fill="ORANGE", font=impact22)
|
||||
textwidth, textheight = draw.textsize(line3, font=impact22)
|
||||
draw.text(((240 - textwidth) / 2, 90), line3, fill="ORANGE", font=impact22)
|
||||
textwidth, textheight = draw.textsize(line4, font=impact22)
|
||||
draw.text(((240 - textwidth) / 2, 125), line4, fill="ORANGE", font=impact22)
|
||||
textwidth, textheight = draw.textsize(line5, font=impact22)
|
||||
draw.text(((240 - textwidth) / 2, 190), line5, fill="ORANGE", font=impact22)
|
||||
disp.ShowImage(image, 0, 0)
|
||||
|
||||
if GPIO.input(KEY_RIGHT_PIN) == GPIO.LOW:
|
||||
time.sleep(0.4)
|
||||
running1 = False
|
||||
|
||||
donationqr = qrcode.make("bc1q8u3dyltlg6pu56fe7m58aqz9cwrfld0s03zlrjl0wvm9x4nfa60q2l0g97").resize(
|
||||
(240, 240)).convert('RGB')
|
||||
|
||||
while running2 == True:
|
||||
disp.ShowImage(donationqr, 0, 0)
|
||||
|
||||
if GPIO.input(KEY_RIGHT_PIN) == GPIO.LOW:
|
||||
time.sleep(0.4)
|
||||
running2 = False
|
||||
|
||||
localrunstate[0] = 3
|
||||
|
||||
return localrunstate
|
||||
|
||||
#VERSTION MENU
|
||||
#VERSTION MENU
|
||||
#VERSTION MENU
|
||||
|
||||
def version_info(runstate):
|
||||
localrunstate = runstate
|
||||
|
||||
running = True
|
||||
while running == True:
|
||||
line1 = "SeedSigner"
|
||||
line2 = "Version 0.1.0"
|
||||
line3 = "built for use with"
|
||||
line4 = "Specter-desktop"
|
||||
line5 = "(Joystick RIGHT to EXIT)"
|
||||
|
||||
draw.rectangle((0, 0, width, height), outline=0, fill=0)
|
||||
textwidth, textheight = draw.textsize(line1, font=impact22)
|
||||
draw.text(((240 - textwidth) / 2, 20), line1, fill="ORANGE", font=impact22)
|
||||
textwidth, textheight = draw.textsize(line2, font=impact22)
|
||||
draw.text(((240 - textwidth) / 2, 55), line2, fill="ORANGE", font=impact22)
|
||||
textwidth, textheight = draw.textsize(line3, font=impact22)
|
||||
draw.text(((240 - textwidth) / 2, 90), line3, fill="ORANGE", font=impact22)
|
||||
textwidth, textheight = draw.textsize(line4, font=impact22)
|
||||
draw.text(((240 - textwidth) / 2, 125), line4, fill="ORANGE", font=impact22)
|
||||
textwidth, textheight = draw.textsize(line5, font=impact18)
|
||||
draw.text(((240 - textwidth) / 2, 210), line5, fill="ORANGE", font=impact18)
|
||||
disp.ShowImage(image, 0, 0)
|
||||
|
||||
if GPIO.input(KEY_RIGHT_PIN) == GPIO.LOW:
|
||||
time.sleep(0.4)
|
||||
running = False
|
||||
|
||||
localrunstate[0] = 3
|
||||
|
||||
return localrunstate
|
||||
+327
@@ -0,0 +1,327 @@
|
||||
import getwords
|
||||
import ST7789
|
||||
import spidev as SPI
|
||||
import RPi.GPIO as GPIO
|
||||
|
||||
import time
|
||||
import subprocess
|
||||
|
||||
from PIL import Image
|
||||
from PIL import ImageDraw
|
||||
from PIL import ImageFont
|
||||
|
||||
from embit.bip39 import mnemonic_to_bytes
|
||||
from embit.bip39 import mnemonic_from_bytes
|
||||
|
||||
import qrcode
|
||||
|
||||
from imutils.video import VideoStream
|
||||
from pyzbar import pyzbar
|
||||
import argparse
|
||||
import datetime
|
||||
import imutils
|
||||
import time
|
||||
import cv2
|
||||
|
||||
from embit import script
|
||||
from embit import bip32
|
||||
from embit import bip39
|
||||
from embit.networks import NETWORKS
|
||||
from embit import psbt
|
||||
from binascii import unhexlify, hexlify
|
||||
# base64 encoding
|
||||
from binascii import a2b_base64, b2a_base64
|
||||
|
||||
#GPIO define
|
||||
RST_PIN = 25
|
||||
CS_PIN = 8
|
||||
DC_PIN = 24
|
||||
|
||||
KEY_UP_PIN = 6
|
||||
KEY_DOWN_PIN = 19
|
||||
KEY_LEFT_PIN = 5
|
||||
KEY_RIGHT_PIN = 26
|
||||
KEY_PRESS_PIN = 13
|
||||
|
||||
KEY1_PIN = 21
|
||||
KEY2_PIN = 20
|
||||
KEY3_PIN = 16
|
||||
|
||||
RST = 27
|
||||
DC = 25
|
||||
BL = 24
|
||||
bus = 0
|
||||
device = 0
|
||||
|
||||
#init GPIO
|
||||
GPIO.setmode(GPIO.BCM)
|
||||
GPIO.setup(KEY_UP_PIN, GPIO.IN, pull_up_down=GPIO.PUD_UP) # Input with pull-up
|
||||
GPIO.setup(KEY_DOWN_PIN, GPIO.IN, pull_up_down=GPIO.PUD_UP) # Input with pull-up
|
||||
GPIO.setup(KEY_LEFT_PIN, GPIO.IN, pull_up_down=GPIO.PUD_UP) # Input with pull-up
|
||||
GPIO.setup(KEY_RIGHT_PIN, GPIO.IN, pull_up_down=GPIO.PUD_UP) # Input with pull-up
|
||||
GPIO.setup(KEY_PRESS_PIN, GPIO.IN, pull_up_down=GPIO.PUD_UP) # Input with pull-up
|
||||
GPIO.setup(KEY1_PIN, GPIO.IN, pull_up_down=GPIO.PUD_UP) # Input with pull-up
|
||||
GPIO.setup(KEY2_PIN, GPIO.IN, pull_up_down=GPIO.PUD_UP) # Input with pull-up
|
||||
GPIO.setup(KEY3_PIN, GPIO.IN, pull_up_down=GPIO.PUD_UP) # Input with pull-up
|
||||
|
||||
# 240x240 display with hardware SPI:
|
||||
disp = ST7789.ST7789(SPI.SpiDev(bus, device),RST, DC, BL)
|
||||
disp.Init()
|
||||
|
||||
# Create blank image for drawing.
|
||||
# Make sure to create image with mode '1' for 1-bit color.
|
||||
width = 240
|
||||
height = 240
|
||||
image = Image.new('RGB', (width, height))
|
||||
|
||||
# Get drawing object to draw on image.
|
||||
draw = ImageDraw.Draw(image)
|
||||
|
||||
#initialize fonts
|
||||
impact18 = ImageFont.truetype('/usr/share/fonts/truetype/msttcorefonts/Impact.ttf', 18)
|
||||
impact20 = ImageFont.truetype('/usr/share/fonts/truetype/msttcorefonts/Impact.ttf', 20)
|
||||
impact22 = ImageFont.truetype('/usr/share/fonts/truetype/msttcorefonts/Impact.ttf', 22)
|
||||
|
||||
def scananimatedqr():
|
||||
vs = VideoStream(usePiCamera=True).start() # For Pi Camera
|
||||
time.sleep(2.0)
|
||||
|
||||
listofstrings = ["empty"]
|
||||
gotlistlength = False
|
||||
camerarunning = True
|
||||
|
||||
while camerarunning == True:
|
||||
frame = vs.read()
|
||||
frame = imutils.resize(frame, width=400)
|
||||
barcodes = pyzbar.decode(frame)
|
||||
for barcode in barcodes:
|
||||
barcodeData = barcode.data.decode("utf-8")
|
||||
string = barcodeData
|
||||
firstnumberstring = string[1]
|
||||
secondnumberstring = string[4]
|
||||
if gotlistlength == False:
|
||||
stringcounter = int(secondnumberstring) - 1
|
||||
while stringcounter >= 1:
|
||||
listofstrings.append("empty")
|
||||
stringcounter = stringcounter - 1
|
||||
gotlistlength = True
|
||||
length = len(string)
|
||||
spacelocation = string.find(" ") + 1
|
||||
trimmedstring = string[spacelocation:length]
|
||||
listofstrings[int(firstnumberstring) - 1] = trimmedstring
|
||||
if "empty" not in listofstrings:
|
||||
camerarunning = False
|
||||
if GPIO.input(KEY_LEFT_PIN) == GPIO.LOW: # button is released
|
||||
print("joystick pressed left")
|
||||
time.sleep(0.3)
|
||||
vs.stop()
|
||||
return "abort"
|
||||
|
||||
|
||||
qrcodevalue = ""
|
||||
vs.stop()
|
||||
return qrcodevalue.join(listofstrings)
|
||||
|
||||
def signtransaction(seedphrase, psbtstring):
|
||||
localseedphrase = seedphrase
|
||||
localpsbtstring = psbtstring
|
||||
seed = bip39.mnemonic_to_seed(localseedphrase)
|
||||
root = bip32.HDKey.from_seed(seed) # removed: version=NETWORKS["main"]["xprv"]
|
||||
|
||||
# first let's get the root fingerprint
|
||||
fingerprint = root.child(0).fingerprint
|
||||
hardened_derivation = "m/48h/0h/0h/2h"
|
||||
# derive account according to bip84
|
||||
bip48_xprv = root.derive(hardened_derivation)
|
||||
# corresponding master public key:
|
||||
bip48_xpub = bip48_xprv.to_public()
|
||||
print("[%s%s]%s" % (
|
||||
hexlify(fingerprint).decode('utf-8'),
|
||||
hardened_derivation[1:],
|
||||
bip48_xpub.to_base58())
|
||||
)
|
||||
|
||||
# parse psbt transaction
|
||||
b64_psbt = localpsbtstring
|
||||
print("took in psbt string")
|
||||
# first convert it to binary
|
||||
raw = a2b_base64(b64_psbt)
|
||||
print("converted to binary")
|
||||
# then parse
|
||||
tx = psbt.PSBT.parse(raw)
|
||||
|
||||
# print how much we are spending and where
|
||||
total_in = 0
|
||||
for inp in tx.inputs:
|
||||
total_in += inp.witness_utxo.value
|
||||
print("Inputs:", total_in, "satoshi")
|
||||
totalinputs = total_in
|
||||
|
||||
change_out = 0 # value that goes back to us
|
||||
send_outputs = []
|
||||
for i, out in enumerate(tx.outputs):
|
||||
# check if it is a change or not:
|
||||
change = False
|
||||
# should be one or zero for single-key addresses
|
||||
for pub in out.bip32_derivations:
|
||||
# check if it is our key
|
||||
if out.bip32_derivations[pub].fingerprint == fingerprint:
|
||||
hdkey = root.derive(out.bip32_derivations[pub].derivation)
|
||||
mypub = hdkey.key.get_public_key()
|
||||
if mypub != pub:
|
||||
raise ValueError("Derivation path doesn't look right")
|
||||
# now check if provided scriptpubkey matches
|
||||
sc = script.p2wpkh(mypub)
|
||||
if sc == tx.tx.vout[i].script_pubkey:
|
||||
change = True
|
||||
continue
|
||||
if change:
|
||||
change_out += tx.tx.vout[i].value
|
||||
else:
|
||||
send_outputs.append(tx.tx.vout[i])
|
||||
print("Spending", total_in - change_out, "satoshi")
|
||||
totalspending = total_in - change_out
|
||||
|
||||
fee = total_in - change_out
|
||||
for out in send_outputs:
|
||||
fee -= out.value
|
||||
print(out.value, "to", out.script_pubkey.address()) # removed: NETWORKS["main"]
|
||||
print("Fee:", fee, "satoshi")
|
||||
totalfee = fee
|
||||
destinationaddress = out.script_pubkey.address()
|
||||
|
||||
#display transaction information
|
||||
sendingamount = totalspending - totalfee
|
||||
displaytransactioninfo = True
|
||||
while displaytransactioninfo == True:
|
||||
draw.rectangle((0, 0, width, height), outline=0, fill=0)
|
||||
textwidth, textheight = draw.textsize("Confirm last 10 chars", font=impact22)
|
||||
draw.text(((240 - textwidth) / 2, 5), "Confirm last 10 chars", fill="ORANGE", font=impact22)
|
||||
textwidth, textheight = draw.textsize("of the receiving address:", font=impact22)
|
||||
draw.text(((240 - textwidth) / 2, 30), "of the receiving address:", fill="ORANGE", font=impact22)
|
||||
textwidth, textheight = draw.textsize(destinationaddress[-10:], font=impact22)
|
||||
draw.text(((240 - textwidth) / 2, 55), destinationaddress[-10:], fill="ORANGE", font=impact22)
|
||||
textwidth, textheight = draw.textsize("Amount Sending:", font=impact22)
|
||||
draw.text(((240 - textwidth) / 2, 90), "Amount Sending:", fill="ORANGE", font=impact22)
|
||||
textwidth, textheight = draw.textsize(str(sendingamount) + " satoshis", font=impact22)
|
||||
draw.text(((240 - textwidth) / 2, 115), str(sendingamount) + " satoshis", fill="ORANGE", font=impact22)
|
||||
textwidth, textheight = draw.textsize("Plus a fee of:", font=impact22)
|
||||
draw.text(((240 - textwidth) / 2, 150), "Plus a fee of:", fill="ORANGE", font=impact22)
|
||||
textwidth, textheight = draw.textsize(str(totalfee) + " satoshis", font=impact22)
|
||||
draw.text(((240 - textwidth) / 2, 175), str(totalfee) + " satoshis", fill="ORANGE", font=impact22)
|
||||
textwidth, textheight = draw.textsize("Joystick Right to CONTINUE", font=impact18)
|
||||
draw.text(((240 - textwidth) / 2, 215), "Joystick Right to CONTINUE", fill="ORANGE", font=impact18)
|
||||
disp.ShowImage(image, 0, 0)
|
||||
if GPIO.input(KEY_RIGHT_PIN) == GPIO.LOW: # button is released
|
||||
time.sleep(0.2)
|
||||
displaytransactioninfo = False
|
||||
|
||||
# sign the transaction
|
||||
tx.sign_with(root)
|
||||
raw = tx.serialize()
|
||||
# convert to base64
|
||||
b64_psbt = b2a_base64(raw)
|
||||
# somehow b2a ends with \n...
|
||||
if b64_psbt[-1:] == b"\n":
|
||||
b64_psbt = b64_psbt[:-1]
|
||||
# print
|
||||
print("\nSigned transaction:")
|
||||
print(b64_psbt.decode('utf-8'))
|
||||
return b64_psbt.decode('utf-8')
|
||||
|
||||
def showqrcodes(signedpsbt):
|
||||
localsignedpsbt = signedpsbt
|
||||
|
||||
#disp.clear()
|
||||
draw.rectangle((0, 0, width, height), outline=0, fill=0)
|
||||
draw.text((20, 110), "Creating Animated QR Code...", fill="ORANGE", font=impact18)
|
||||
disp.ShowImage(image, 0, 0)
|
||||
|
||||
qrdata = localsignedpsbt
|
||||
|
||||
stringlength = len(qrdata)
|
||||
|
||||
# print("The length of the string is: " + str(stringlength))
|
||||
numofchunks = (stringlength // 100) + 1
|
||||
staticnumofchunks = numofchunks
|
||||
listcounter = 1
|
||||
|
||||
start = 0
|
||||
stop = 99
|
||||
chunklist = ["p" + str(listcounter) + "of" + str(staticnumofchunks) + " " + qrdata[start:stop]]
|
||||
# print("The start is: " + str(start) + " and the end is: " + str(stop))
|
||||
print(chunklist[0])
|
||||
qrimagelist = [qrcode.make(chunklist[0]).resize((240, 240)).convert('RGB')]
|
||||
|
||||
while numofchunks > 1:
|
||||
#draw.rectangle((0, 0, width, height), outline=0, fill=0)
|
||||
#draw.text((20, 110), "Creating Animated QR Code", fill="ORANGE", font=impact18)
|
||||
#disp.ShowImage(image, 0, 0)
|
||||
start = start + 100
|
||||
stop = stop + 100
|
||||
if stop > stringlength:
|
||||
stop = stringlength # - 1
|
||||
chunklist.append("p" + str(listcounter + 1) + "of" + str(staticnumofchunks) + " " + qrdata[start - 1:stop])
|
||||
print(chunklist[listcounter])
|
||||
qrimagelist.append(qrcode.make(chunklist[listcounter]).resize((240, 240)).convert('RGB'))
|
||||
listcounter = listcounter + 1
|
||||
numofchunks = numofchunks - 1
|
||||
|
||||
showingqrs = True
|
||||
displayedqr = 0
|
||||
|
||||
while showingqrs == True:
|
||||
disp.ShowImage(qrimagelist[displayedqr], 0, 0)
|
||||
time.sleep(0.3)
|
||||
if displayedqr < staticnumofchunks - 1:
|
||||
displayedqr = displayedqr + 1
|
||||
time.sleep(0.3)
|
||||
else:
|
||||
displayedqr = 0
|
||||
time.sleep(0.3)
|
||||
if GPIO.input(KEY_RIGHT_PIN) == GPIO.LOW: # button is released
|
||||
time.sleep(0.4)
|
||||
showingqrs = False
|
||||
else:
|
||||
time.sleep(0.3)
|
||||
|
||||
def sign_psbt(runstate):
|
||||
localrunstate = runstate
|
||||
|
||||
if localrunstate[1] == "":
|
||||
localrunstate = getwords.gather_24_words(localrunstate)
|
||||
|
||||
print("The selected seed is:")
|
||||
print(localrunstate[1])
|
||||
print("")
|
||||
|
||||
draw.rectangle((0, 0, width, height), outline=0, fill=0)
|
||||
draw.text((20, 110), "Scan the Animated QR Code", fill="ORANGE", font=impact18)
|
||||
textwidth, textheight = draw.textsize("Press joystick LEFT to ABORT", font=impact18)
|
||||
draw.text(((240 - textwidth) / 2, 215), "Press joystick LEFT to ABORT", fill="ORANGE", font=impact18)
|
||||
disp.ShowImage(image, 0, 0)
|
||||
|
||||
importedpbststring = scananimatedqr()
|
||||
|
||||
if importedpbststring == "abort":
|
||||
localrunstate[0] = 0
|
||||
localrunstate[1] = ""
|
||||
return localrunstate
|
||||
|
||||
print("The selected PSBT is:")
|
||||
print(importedpbststring)
|
||||
print("")
|
||||
|
||||
draw.rectangle((0, 0, width, height), outline=0, fill=0)
|
||||
disp.ShowImage(image, 0, 0)
|
||||
|
||||
signedpsbtstring = signtransaction(runstate[1], importedpbststring)
|
||||
|
||||
showqrcodes(signedpsbtstring)
|
||||
|
||||
localrunstate[0] = 0
|
||||
localrunstate[1] = ""
|
||||
|
||||
print("You reached the end of the sign_psbt function.")
|
||||
|
||||
return localrunstate
|
||||
+154
@@ -0,0 +1,154 @@
|
||||
import ST7789
|
||||
import spidev as SPI
|
||||
import RPi.GPIO as GPIO
|
||||
import time
|
||||
import getwords
|
||||
|
||||
from embit import script
|
||||
from embit import bip32
|
||||
from embit import bip39
|
||||
from embit.networks import NETWORKS
|
||||
from embit import psbt
|
||||
from binascii import unhexlify, hexlify
|
||||
|
||||
from PIL import Image
|
||||
from PIL import ImageDraw
|
||||
from PIL import ImageFont
|
||||
import qrcode
|
||||
|
||||
#GPIO define
|
||||
RST_PIN = 25
|
||||
CS_PIN = 8
|
||||
DC_PIN = 24
|
||||
|
||||
KEY_UP_PIN = 6
|
||||
KEY_DOWN_PIN = 19
|
||||
KEY_LEFT_PIN = 5
|
||||
KEY_RIGHT_PIN = 26
|
||||
KEY_PRESS_PIN = 13
|
||||
|
||||
KEY1_PIN = 21
|
||||
KEY2_PIN = 20
|
||||
KEY3_PIN = 16
|
||||
|
||||
# Raspberry Pi pin configuration:
|
||||
RST = 27
|
||||
DC = 25
|
||||
BL = 24
|
||||
bus = 0
|
||||
device = 0
|
||||
|
||||
#init GPIO
|
||||
GPIO.setmode(GPIO.BCM)
|
||||
GPIO.setup(KEY_UP_PIN, GPIO.IN, pull_up_down=GPIO.PUD_UP) # Input with pull-up
|
||||
GPIO.setup(KEY_DOWN_PIN, GPIO.IN, pull_up_down=GPIO.PUD_UP) # Input with pull-up
|
||||
GPIO.setup(KEY_LEFT_PIN, GPIO.IN, pull_up_down=GPIO.PUD_UP) # Input with pull-up
|
||||
GPIO.setup(KEY_RIGHT_PIN, GPIO.IN, pull_up_down=GPIO.PUD_UP) # Input with pull-up
|
||||
GPIO.setup(KEY_PRESS_PIN, GPIO.IN, pull_up_down=GPIO.PUD_UP) # Input with pull-up
|
||||
GPIO.setup(KEY1_PIN, GPIO.IN, pull_up_down=GPIO.PUD_UP) # Input with pull-up
|
||||
GPIO.setup(KEY2_PIN, GPIO.IN, pull_up_down=GPIO.PUD_UP) # Input with pull-up
|
||||
GPIO.setup(KEY3_PIN, GPIO.IN, pull_up_down=GPIO.PUD_UP) # Input with pull-up
|
||||
|
||||
# 240x240 display with hardware SPI:
|
||||
disp = ST7789.ST7789(SPI.SpiDev(bus, device),RST, DC, BL)
|
||||
disp.Init()
|
||||
|
||||
# Create blank image for drawing.
|
||||
# Make sure to create image with mode '1' for 1-bit color.
|
||||
width = 240
|
||||
height = 240
|
||||
image = Image.new('RGB', (width, height))
|
||||
|
||||
# Get drawing object to draw on image.
|
||||
draw = ImageDraw.Draw(image)
|
||||
|
||||
impact18 = ImageFont.truetype('/usr/share/fonts/truetype/msttcorefonts/Impact.ttf', 18)
|
||||
impact22 = ImageFont.truetype('/usr/share/fonts/truetype/msttcorefonts/Impact.ttf', 22)
|
||||
|
||||
def showqrcodes(xpubstring):
|
||||
localxpubstring = xpubstring
|
||||
|
||||
# draw.rectangle((0, 0, width, height), outline=0, fill=0)
|
||||
# draw.text((20, 110), "Creating Animated QR Code...", fill="ORANGE", font=impact18)
|
||||
# disp.ShowImage(image, 0, 0)
|
||||
|
||||
qrdata = localxpubstring
|
||||
|
||||
stringlength = len(qrdata)
|
||||
|
||||
# print("The length of the string is: " + str(stringlength))
|
||||
numofchunks = (stringlength // 100) + 1
|
||||
staticnumofchunks = numofchunks
|
||||
listcounter = 1
|
||||
|
||||
start = 0
|
||||
stop = 99
|
||||
chunklist = ["p" + str(listcounter) + "of" + str(staticnumofchunks) + " " + qrdata[start:stop]]
|
||||
# print("The start is: " + str(start) + " and the end is: " + str(stop))
|
||||
print(chunklist[0])
|
||||
qrimagelist = [qrcode.make(chunklist[0]).resize((240, 240)).convert('RGB')]
|
||||
|
||||
while numofchunks > 1:
|
||||
start = start + 100
|
||||
stop = stop + 100
|
||||
if stop > stringlength:
|
||||
stop = stringlength # - 1
|
||||
chunklist.append("p" + str(listcounter + 1) + "of" + str(staticnumofchunks) + " " + qrdata[start - 1:stop])
|
||||
print(chunklist[listcounter])
|
||||
qrimagelist.append(qrcode.make(chunklist[listcounter]).resize((240, 240)).convert('RGB'))
|
||||
listcounter = listcounter + 1
|
||||
numofchunks = numofchunks - 1
|
||||
|
||||
showingqrs = True
|
||||
displayedqr = 0
|
||||
|
||||
while showingqrs == True:
|
||||
disp.ShowImage(qrimagelist[displayedqr], 0, 0)
|
||||
time.sleep(0.3)
|
||||
if displayedqr < staticnumofchunks - 1:
|
||||
displayedqr = displayedqr + 1
|
||||
time.sleep(0.3)
|
||||
else:
|
||||
displayedqr = 0
|
||||
time.sleep(0.3)
|
||||
if GPIO.input(KEY_RIGHT_PIN) == GPIO.LOW: # button is released
|
||||
time.sleep(0.2)
|
||||
showingqrs = False
|
||||
else:
|
||||
time.sleep(0.3)
|
||||
|
||||
def make_xpub(runstate):
|
||||
localrunstate = getwords.gather_24_words(runstate)
|
||||
|
||||
draw.rectangle((0, 0, width, height), outline=0, fill=0)
|
||||
draw.text((20, 110), "Creating Animated QR Code", fill="ORANGE", font=impact18)
|
||||
disp.ShowImage(image, 0, 0)
|
||||
|
||||
seed = bip39.mnemonic_to_seed(localrunstate[1])
|
||||
root = bip32.HDKey.from_seed(seed) # removed: version=NETWORKS["main"]["xprv"]
|
||||
|
||||
# first let's get the root fingerprint
|
||||
fingerprint = root.child(0).fingerprint
|
||||
hardened_derivation = "m/48h/0h/0h/2h"
|
||||
|
||||
# derive account according to bip84
|
||||
bip48_xprv = root.derive(hardened_derivation)
|
||||
|
||||
# corresponding master public key:
|
||||
bip48_xpub = bip48_xprv.to_public()
|
||||
|
||||
xpubstring = "[%s%s]%s" % (
|
||||
hexlify(fingerprint).decode('utf-8'),
|
||||
hardened_derivation[1:],
|
||||
bip48_xpub.to_base58(NETWORKS["main"]["Zpub"]))
|
||||
|
||||
print(xpubstring)
|
||||
|
||||
showqrcodes(xpubstring)
|
||||
|
||||
localrunstate[0] = 0
|
||||
localrunstate[1] = ""
|
||||
|
||||
print(localrunstate)
|
||||
|
||||
return localrunstate
|
||||
Reference in New Issue
Block a user