laantungir/seedsigner
1
0
Fork 0
mirror of https://github.com/SeedSigner/seedsigner.git synced 2026-10-05 15:08:25 +00:00
Code Issues Packages Projects Releases Wiki Activity

Note about slicing issues with Bambo Slicer

Browse Source
This commit is contained in:
Kayth
2024-05-22 00:28:42 +02:00
parent 3b4d89877e
commit 415e57bf16
1 changed files with 5 additions and 1 deletions
Download Patch File Download Diff File Expand all files Collapse all files
enclosures/pushcase/README.md
+5 -1
View File
@@ -28,6 +28,10 @@ The motivation for this design was to get a thin, screwless and good looking enc
Please note that the prints must be accurate in order to fit tightly without screws and for the buttons to perform smoothly. The prints are well tested with a Prusa MK3s (.3mf files attached), Prusament PLA and hardware components from early 2024. With this setup, the enclosure holds strongly together, but can still be opened again with a little effort (although this is not recommended, as it may not hold together as tightly afterwards). Other printers or newer or older hardware may produce results that do not fit and in worst case damage the hardware.
## Known issues
- Bambu Studio Slicer: There is a strange problem when slicing the buttons. A few layers are missing. As a workaround you can use another slicer, e.g. the Prusa Slicer.
## Assembly
### 1. Get all the parts
@@ -119,7 +123,7 @@ Get in touch if you have any questions or suggestions. Success stories are also
## Donation
If you like my work and want to honor it, I appreciate any small donation to my Lightning Address kayth@blink.sv. But even more importantly, please consider a donation to the [Seedsigner Development Fund](https://seedsigner.com/donate-now/).
If you like my work and want to honor it, I appreciate any small donation to my Lightning Address kayth@blink.sv. But even more important, please consider a donation to the [Seedsigner Development Fund](https://seedsigner.com/donate-now/).
## Shop