mirror of
https://github.com/jmcorgan/fips.git
synced 2026-07-30 19:46:15 +00:00
ArjenandGitHub
f624013b83
Access layer for phones and laptops to reach FIPS routers on OpenWrt, stacked on the 802.11s mesh backhaul from #123. Squashed from five commits by Arjen (Origami74); their original messages follow. * feat(openwrt): open !FIPS access SSID — fips-ap-setup helper, default transport binding, how-to Client access layer for phones and laptops: every FIPS router broadcasts the same open SSID ('!FIPS' — the leading '!' sorts it to the top of alphabetically ordered network pickers), forming one standard ESS. Clients save it once and roam between all FIPS routers natively, with FIPS's Noise IK handshake as the only security layer: - fips-ap-setup: opt-in UCI helper that creates the 'fips-ap0' open AP (encryption none — security type must be uniform across routers or clients treat the ESS as different saved networks), an isolated network with a static ULA /64, RA-only odhcpd addressing (stateless SLAAC, no DHCP — the minimum that satisfies Android's provisioning check; no internet by design, so phones keep cellular as default route), and a locked-down fips_ap firewall zone (no path to br-lan or the WAN; only ICMPv6, mDNS, and the FIPS transports reachable). 'remove' subcommand undoes it. Radio setup stays opt-in; a package must not commandeer radios on install. - fips.yaml: ship 'ap0'/'ap1' Ethernet-transport entries commented out (matching the 802.11s mesh backhaul) so a stock install that never creates fips-ap* logs no per-boot "interface missing" bind warning; fips-ap-setup uncomments the matching block when it creates the interface and re-comments it on remove. - Regression test: extend shipped_openwrt_config_parses to assert the ap0/ap1 entries ship commented out and still parse once uncommented, alongside mesh0/mesh1. - Packaging: install the helper in ipk/apk/buildroot (three synced copies), extend CI structural checks and shellcheck targets. - docs/how-to/set-up-open-access-ssid.md: full guide, including the one-time 'no internet, stay connected' acceptance (stored per SSID, covers every FIPS router) and the security-type-uniformity constraint. * docs(openwrt): correct open-SSID/mesh security framing — peering is open by design The fips-ap-setup/fips-mesh-setup comments and both how-tos claimed a stranger "cannot pass the FIPS handshake" / "their frames die at the handshake" / the handshake surface "drops them". That is wrong: FIPS peer admission is open. An inbound handshake from any net-new identity is promoted (node::handlers::handshake::promote_connection), gated only by the daemon's max-peers cap — there is no allowlist, no PSK, and the AuthChallenge path is not wired to admission. The Noise IK handshake provides authentication (no impersonation of another identity, no MITM), not authorization. Restate the model accurately in all five places: a stranger on the open SSID (or the open mesh) can associate AND form a FIPS peer link — that is the point of open access. Containment is the isolated fips_ap zone (no path to br-lan or the WAN) plus the max-peers cap, not the handshake. Clarify that AP client isolation is an L2 control only: a peered stranger is an overlay peer like any other, so the FIPS overlay, not L2, is the trust boundary between clients. * feat(openwrt): serve DHCPv4 on the access SSID from a fixed roamable subnet RA-only addressing satisfied Android's provisioning check but left anything expecting IPv4 with a self-assigned address and a "no IP" complaint. dnsmasq now leases out of 10.21.<N>.0/24 (N = radio index; prefix echoes FIPS port 2121), deliberately identical on every router: a roaming client keeps its lease across the ESS, and dnsmasq's authoritative mode — the OpenWrt default, pinned by the helper — ACKs the renew a foreign router never issued. Lease collisions across routers surface as a NAK on renew and the client re-DHCPs. The dhcp section's 'dhcpv4 server' is read by both dnsmasq (default images) and odhcpd (only with maindhcp), so either arrangement serves. A DHCPv4/udp-67 accept rule joins the fips_ap zone; DHCPv6 stays off, the ULA RA stays as-is, and nothing depends on an upstream. The zone remains isolated — no forwardings, no internet. * feat(openwrt): enable mDNS rendezvous from fips-ap-setup Phone FIPS apps cannot open raw-Ethernet sockets, so DNS-SD is how they find the router's daemon — but node.rendezvous.lan defaults to off. Ship the lan block commented in fips.yaml (consistent with the apN transport entries) and have fips-ap-setup uncomment it when creating the access SSID. The awk match is scoped to node.rendezvous because transports.ethernet carries a 'lan' entry at the same indent. The switch is daemon-wide, so 'remove' deliberately leaves it on rather than guess whether other transports rely on it. * fix(openwrt): bind UDP dual-stack [::]:2121 so access-SSID clients reach it The shipped router config bound the UDP transport "0.0.0.0:2121" (IPv4 wildcard) while the mDNS LAN advert announces every interface address, including the router's IPv6 link-local — which phones on the !FIPS access SSID rightly prefer (their cellular default route swallows v4, and fd00::/8 is captured by the Myco mesh TUN). Result: the client's Noise msg1 arrives on an unbound v6 port and is silently lost; the handshake resends and times out. Symptom chain (observed on-device): mDNS resolve OK, platform push OK, "Sent Noise handshake message 1" to [fe80::…%N]:2121, four resends, no reply, 30 s stale-timeout. OpenWrt is Linux (bindv6only=0), so "[::]" accepts IPv4 via v4-mapped addresses too — nothing is lost. packaging/common is deliberately left on "0.0.0.0" for now: Windows defaults IPV6_V6ONLY=1, where "[::]" would drop v4 instead.
938 lines
34 KiB
YAML
938 lines
34 KiB
YAML
name: OpenWrt Package
|
|
on:
|
|
push:
|
|
branches:
|
|
- master
|
|
- maint
|
|
- next
|
|
tags:
|
|
- "v*"
|
|
pull_request:
|
|
workflow_dispatch:
|
|
inputs:
|
|
arch:
|
|
description: "Target architecture (leave empty to build all)"
|
|
required: false
|
|
default: ""
|
|
|
|
env:
|
|
CARGO_TERM_COLOR: always
|
|
PACKAGE_NAME: "fips"
|
|
|
|
jobs:
|
|
determine-versioning:
|
|
runs-on: ubuntu-latest
|
|
outputs:
|
|
package_version: ${{ steps.version.outputs.package_version }}
|
|
apk_version: ${{ steps.version.outputs.apk_version }}
|
|
release_channel: ${{ steps.channel.outputs.release_channel }}
|
|
steps:
|
|
- uses: actions/checkout@v6
|
|
with:
|
|
fetch-depth: 0
|
|
|
|
- name: Derive package version
|
|
id: version
|
|
shell: bash
|
|
run: |
|
|
: ${GITHUB_OUTPUT:=/tmp/github_output}
|
|
# package_version is the human-readable label used in artifact
|
|
# filenames; apk_version is the apk-tools-compatible string embedded
|
|
# in the .apk metadata. apk_version is built directly from the same
|
|
# structured inputs (tag, or commit height) — no reparse of the
|
|
# flattened package_version. See packaging/openwrt-apk/apk-version.sh.
|
|
if [[ "$GITHUB_REF" == refs/tags/* ]]; then
|
|
echo "package_version=${GITHUB_REF_NAME}" >> "$GITHUB_OUTPUT"
|
|
echo "apk_version=$(sh packaging/openwrt-apk/apk-version.sh tag "${GITHUB_REF_NAME}")" >> "$GITHUB_OUTPUT"
|
|
else
|
|
BRANCH=$(echo "$GITHUB_REF_NAME" | sed 's|/|-|g')
|
|
HEIGHT=$(git rev-list --count HEAD)
|
|
HASH=$(git rev-parse --short HEAD)
|
|
echo "package_version=${BRANCH}.${HEIGHT}.${HASH}" >> "$GITHUB_OUTPUT"
|
|
echo "apk_version=$(sh packaging/openwrt-apk/apk-version.sh dev "${HEIGHT}")" >> "$GITHUB_OUTPUT"
|
|
fi
|
|
|
|
- name: Determine release channel
|
|
id: channel
|
|
shell: bash
|
|
run: |
|
|
: ${GITHUB_OUTPUT:=/tmp/github_output}
|
|
if [[ "$GITHUB_REF" == refs/tags/* ]]; then
|
|
TAG_NAME=${GITHUB_REF#refs/tags/}
|
|
if [[ $TAG_NAME =~ ^v[0-9]+\.[0-9]+\.[0-9]+-alpha ]]; then
|
|
echo "release_channel=alpha" >> "$GITHUB_OUTPUT"
|
|
elif [[ $TAG_NAME =~ ^v[0-9]+\.[0-9]+\.[0-9]+-beta ]]; then
|
|
echo "release_channel=beta" >> "$GITHUB_OUTPUT"
|
|
elif [[ $TAG_NAME =~ ^v[0-9]+\.[0-9]+\.[0-9]+$ ]]; then
|
|
echo "release_channel=stable" >> "$GITHUB_OUTPUT"
|
|
else
|
|
echo "release_channel=dev" >> "$GITHUB_OUTPUT"
|
|
fi
|
|
else
|
|
echo "release_channel=dev" >> "$GITHUB_OUTPUT"
|
|
fi
|
|
|
|
compile-binaries:
|
|
name: Cross-compile (${{ matrix.openwrt_arch }})
|
|
runs-on: ubuntu-latest
|
|
needs: determine-versioning
|
|
|
|
strategy:
|
|
fail-fast: false
|
|
matrix:
|
|
include:
|
|
- build_arch: aarch64
|
|
openwrt_arch: aarch64_cortex-a53
|
|
rust_target: aarch64-unknown-linux-musl
|
|
rust_channel: stable
|
|
# MT3000, MT6000, Flint 2, RPi 3/4/5
|
|
# MIPS disabled: nostr-relay-pool 0.44 uses std::sync::atomic::AtomicU64
|
|
# directly (fips's own atomics already use portable_atomic). Re-enable
|
|
# once an upstream portable-atomic patch lands (or via [patch.crates-io]).
|
|
# - build_arch: mipsel
|
|
# openwrt_arch: mipsel_24kc
|
|
# rust_target: mipsel-unknown-linux-musl
|
|
# rust_channel: nightly
|
|
# - build_arch: mips
|
|
# openwrt_arch: mips_24kc
|
|
# rust_target: mips-unknown-linux-musl
|
|
# rust_channel: nightly
|
|
- build_arch: x86_64
|
|
openwrt_arch: x86_64
|
|
rust_target: x86_64-unknown-linux-musl
|
|
rust_channel: stable
|
|
# x86 routers / VMs
|
|
|
|
steps:
|
|
- uses: actions/checkout@v6
|
|
with:
|
|
fetch-depth: 0
|
|
|
|
- name: Install Rust toolchain (stable)
|
|
if: matrix.rust_channel == 'stable'
|
|
uses: actions-rust-lang/setup-rust-toolchain@v1
|
|
with:
|
|
target: ${{ matrix.rust_target }}
|
|
cache: false
|
|
rustflags: ''
|
|
|
|
- name: Install Rust toolchain (nightly, Tier 3)
|
|
if: matrix.rust_channel == 'nightly'
|
|
uses: dtolnay/rust-toolchain@nightly
|
|
with:
|
|
components: rust-src
|
|
|
|
- name: Cache Cargo registry + build
|
|
if: ${{ env.ACT != 'true' }}
|
|
uses: actions/cache@v5
|
|
with:
|
|
path: |
|
|
~/.cargo/registry
|
|
~/.cargo/git
|
|
target/${{ matrix.rust_target }}
|
|
key: openwrt-${{ matrix.rust_target }}-${{ hashFiles('**/Cargo.lock') }}
|
|
restore-keys: |
|
|
openwrt-${{ matrix.rust_target }}-
|
|
|
|
- name: Install cargo-zigbuild
|
|
run: cargo install cargo-zigbuild --version 0.19.8 --locked
|
|
|
|
- name: Install zig (required by cargo-zigbuild)
|
|
run: |
|
|
ZIG_VERSION="0.13.0"
|
|
ARCH=$(uname -m)
|
|
case "$ARCH" in
|
|
x86_64|amd64) ZIG_ARCH="x86_64" ;;
|
|
aarch64|arm64) ZIG_ARCH="aarch64" ;;
|
|
*) echo "Unsupported architecture: $ARCH"; exit 1 ;;
|
|
esac
|
|
curl -fsSL "https://ziglang.org/download/${ZIG_VERSION}/zig-linux-${ZIG_ARCH}-${ZIG_VERSION}.tar.xz" | sudo tar xJ -C /opt
|
|
sudo ln -sf /opt/zig-linux-${ZIG_ARCH}-${ZIG_VERSION}/zig /usr/local/bin/zig
|
|
zig version
|
|
|
|
- name: Install llvm-strip
|
|
run: sudo apt-get update && sudo apt-get install -y --no-install-recommends llvm
|
|
|
|
# Cross-compile + strip once; both the .ipk and .apk packagers consume
|
|
# these artifacts via --bin-dir, so the Rust build runs a single time
|
|
# per architecture instead of once per package format.
|
|
- name: Cross-compile and strip binaries
|
|
run: |
|
|
set -euo pipefail
|
|
cargo zigbuild --release --target ${{ matrix.rust_target }} \
|
|
--bin fips --bin fipsctl --bin fipstop --bin fips-gateway
|
|
RELEASE_DIR="target/${{ matrix.rust_target }}/release"
|
|
mkdir -p out
|
|
for b in fips fipsctl fipstop fips-gateway; do
|
|
llvm-strip "$RELEASE_DIR/$b" 2>/dev/null || true
|
|
cp "$RELEASE_DIR/$b" "out/$b"
|
|
done
|
|
ls -lh out/
|
|
|
|
- name: Upload binaries artifact
|
|
uses: actions/upload-artifact@v7
|
|
with:
|
|
name: fips-bins-${{ matrix.openwrt_arch }}
|
|
path: out/
|
|
retention-days: 1
|
|
|
|
build:
|
|
name: Build .ipk (${{ matrix.openwrt_arch }})
|
|
runs-on: ubuntu-latest
|
|
needs: [determine-versioning, compile-binaries]
|
|
|
|
strategy:
|
|
fail-fast: false
|
|
matrix:
|
|
# Must be a subset of compile-binaries' arches (this job consumes those
|
|
# binary artifacts). Currently both ship aarch64 + x86_64.
|
|
include:
|
|
- build_arch: aarch64
|
|
openwrt_arch: aarch64_cortex-a53
|
|
- build_arch: x86_64
|
|
openwrt_arch: x86_64
|
|
|
|
steps:
|
|
- uses: actions/checkout@v6
|
|
with:
|
|
fetch-depth: 0
|
|
|
|
- name: Set SOURCE_DATE_EPOCH from git
|
|
run: echo "SOURCE_DATE_EPOCH=$(git log -1 --format=%ct)" >> "$GITHUB_ENV"
|
|
|
|
- name: Initialize
|
|
run: |
|
|
PACKAGE_FILENAME=${{ env.PACKAGE_NAME }}_${{ needs.determine-versioning.outputs.package_version }}_${{ matrix.openwrt_arch }}.ipk
|
|
echo "PACKAGE_FILENAME=$PACKAGE_FILENAME" >> $GITHUB_ENV
|
|
|
|
- name: Download prebuilt binaries
|
|
uses: actions/download-artifact@v8
|
|
with:
|
|
name: fips-bins-${{ matrix.openwrt_arch }}
|
|
path: bins
|
|
|
|
- name: Install nak
|
|
shell: bash
|
|
run: |
|
|
NAK_VERSION="0.16.2"
|
|
ARCH=$(uname -m)
|
|
case "$ARCH" in
|
|
x86_64|amd64) NAK_ARCH="amd64" ;;
|
|
aarch64|arm64) NAK_ARCH="arm64" ;;
|
|
*) echo "Unsupported architecture: $ARCH"; exit 1 ;;
|
|
esac
|
|
curl -fsSL "https://github.com/fiatjaf/nak/releases/download/v${NAK_VERSION}/nak-v${NAK_VERSION}-linux-${NAK_ARCH}" \
|
|
-o /usr/local/bin/nak
|
|
chmod +x /usr/local/bin/nak
|
|
nak --version
|
|
|
|
- name: Install jq
|
|
run: |
|
|
if ! command -v jq &>/dev/null; then
|
|
sudo apt-get update && sudo apt-get install -y jq
|
|
fi
|
|
|
|
# Priority: HIVE_CI_NSEC from env (loom job) > repo secret > generate ephemeral
|
|
- name: Resolve signing key
|
|
id: keys
|
|
shell: bash
|
|
env:
|
|
SECRET_NSEC: ${{ secrets.HIVE_CI_NSEC }}
|
|
run: |
|
|
: ${GITHUB_OUTPUT:=/tmp/github_output}
|
|
if [ -n "${HIVE_CI_NSEC:-}" ]; then
|
|
echo "Using HIVE_CI_NSEC from loom job environment"
|
|
NSEC="$HIVE_CI_NSEC"
|
|
elif [ -n "$SECRET_NSEC" ]; then
|
|
echo "Using HIVE_CI_NSEC from repository secrets"
|
|
NSEC="$SECRET_NSEC"
|
|
else
|
|
echo "No nsec provided -- generating ephemeral keypair"
|
|
NSEC=$(nak key generate)
|
|
fi
|
|
|
|
PUBKEY=$(echo "$NSEC" | nak key public)
|
|
echo "::add-mask::$NSEC"
|
|
echo "nsec=$NSEC" >> "$GITHUB_OUTPUT"
|
|
echo "pubkey=$PUBKEY" >> "$GITHUB_OUTPUT"
|
|
echo "Publisher pubkey (hex): $PUBKEY"
|
|
- name: Build .ipk
|
|
env:
|
|
PKG_VERSION: ${{ needs.determine-versioning.outputs.package_version }}
|
|
run: ./packaging/openwrt-ipk/build-ipk.sh --arch ${{ matrix.build_arch }} --bin-dir "$GITHUB_WORKSPACE/bins"
|
|
|
|
- name: Install shellcheck (if missing)
|
|
shell: bash
|
|
run: |
|
|
if ! command -v shellcheck >/dev/null 2>&1; then
|
|
sudo apt-get update && sudo apt-get install -y --no-install-recommends shellcheck
|
|
fi
|
|
shellcheck --version
|
|
|
|
- name: Lint shipped shell scripts
|
|
shell: bash
|
|
run: |
|
|
set -euo pipefail
|
|
FILES_DIR=packaging/openwrt-ipk/files
|
|
# Scripts shipped inside the .ipk. The init scripts use the OpenWrt
|
|
# `#!/bin/sh /etc/rc.common` shebang; tell shellcheck to treat them
|
|
# as POSIX sh and silence the unrecognized-shebang warning (SC1008).
|
|
# SC2317 (unreachable command) fires on rc.common's externally-invoked
|
|
# start_service/stop_service/reload_service hooks.
|
|
TARGETS=(
|
|
"$FILES_DIR/etc/init.d/fips"
|
|
"$FILES_DIR/etc/init.d/fips-gateway"
|
|
"$FILES_DIR/etc/fips/firewall.sh"
|
|
"$FILES_DIR/etc/hotplug.d/net/99-fips"
|
|
"$FILES_DIR/etc/uci-defaults/90-fips-setup"
|
|
"$FILES_DIR/usr/bin/fips-mesh-setup"
|
|
"$FILES_DIR/usr/bin/fips-ap-setup"
|
|
)
|
|
fail=0
|
|
for f in "${TARGETS[@]}"; do
|
|
if [ ! -f "$f" ]; then
|
|
echo "FAIL: missing $f"
|
|
fail=1
|
|
continue
|
|
fi
|
|
echo "==> shellcheck $f"
|
|
if shellcheck --shell=sh --exclude=SC1008,SC2317,SC2034,SC3043,SC2086,SC2089,SC2090 "$f"; then
|
|
echo " PASS"
|
|
else
|
|
echo " FAIL"
|
|
fail=1
|
|
fi
|
|
done
|
|
if [ "$fail" -ne 0 ]; then
|
|
echo "shellcheck FAILED"
|
|
exit 1
|
|
fi
|
|
echo "shellcheck PASS (${#TARGETS[@]} scripts)"
|
|
|
|
- name: Sysctl drop-in syntax check
|
|
shell: bash
|
|
run: |
|
|
set -euo pipefail
|
|
FILES_DIR=packaging/openwrt-ipk/files
|
|
TARGETS=(
|
|
"$FILES_DIR/etc/sysctl.d/fips-gateway.conf"
|
|
"$FILES_DIR/etc/sysctl.d/fips-bridge.conf"
|
|
)
|
|
fail=0
|
|
for conf in "${TARGETS[@]}"; do
|
|
if [ ! -f "$conf" ]; then
|
|
echo "FAIL: missing $conf"
|
|
fail=1
|
|
continue
|
|
fi
|
|
echo "==> validating $conf"
|
|
lineno=0
|
|
file_ok=1
|
|
while IFS= read -r line || [ -n "$line" ]; do
|
|
lineno=$((lineno + 1))
|
|
# Skip comments and blank lines.
|
|
case "$line" in
|
|
''|\#*) continue ;;
|
|
esac
|
|
# Match: <key> = <value> where key is dotted lower-id and value is
|
|
# an integer (sysctl drop-ins shipped here are all numeric toggles).
|
|
if ! [[ "$line" =~ ^[a-z0-9_.-]+[[:space:]]*=[[:space:]]*-?[0-9]+[[:space:]]*$ ]]; then
|
|
echo " FAIL line $lineno: $line"
|
|
file_ok=0
|
|
fi
|
|
done < "$conf"
|
|
if [ "$file_ok" -eq 1 ]; then
|
|
echo " PASS"
|
|
else
|
|
fail=1
|
|
fi
|
|
done
|
|
if [ "$fail" -ne 0 ]; then
|
|
echo "sysctl drop-in syntax check FAILED"
|
|
exit 1
|
|
fi
|
|
echo "sysctl drop-in syntax check PASS"
|
|
|
|
- name: Verify ipk structural integrity
|
|
shell: bash
|
|
run: |
|
|
set -euo pipefail
|
|
IPK="dist/${{ env.PACKAGE_FILENAME }}"
|
|
if [ ! -f "$IPK" ]; then
|
|
echo "FAIL: produced ipk not found at $IPK"
|
|
exit 1
|
|
fi
|
|
echo "==> file type:"
|
|
file "$IPK"
|
|
|
|
# OpenWrt .ipk = tar.gz containing debian-binary + control.tar.gz +
|
|
# data.tar.gz (NOT an ar archive like Debian's .deb).
|
|
WORK=$(mktemp -d)
|
|
trap 'rm -rf "$WORK"' EXIT
|
|
|
|
tar -xzf "$IPK" -C "$WORK"
|
|
echo "==> top-level entries:"
|
|
ls -la "$WORK"
|
|
|
|
# Top-level structural assertions.
|
|
fail=0
|
|
for entry in debian-binary control.tar.gz data.tar.gz; do
|
|
if [ ! -f "$WORK/$entry" ]; then
|
|
echo "FAIL: missing top-level $entry"
|
|
fail=1
|
|
else
|
|
echo " PASS top-level: $entry"
|
|
fi
|
|
done
|
|
if [ "$fail" -ne 0 ]; then exit 1; fi
|
|
|
|
# debian-binary content sanity.
|
|
dbin_content=$(cat "$WORK/debian-binary" | tr -d '[:space:]')
|
|
if [ "$dbin_content" != "2.0" ]; then
|
|
echo "FAIL: debian-binary content is '$dbin_content' (expected 2.0)"
|
|
exit 1
|
|
fi
|
|
echo " PASS debian-binary content: 2.0"
|
|
|
|
# Inspect data.tar.gz contents.
|
|
DATA_LIST="$WORK/data.list"
|
|
tar -tzf "$WORK/data.tar.gz" > "$DATA_LIST"
|
|
echo "==> data.tar.gz entry count: $(wc -l < "$DATA_LIST")"
|
|
|
|
# Required filesystem entries inside data.tar.gz. Entries are
|
|
# produced with a leading "./" by build-ipk.sh.
|
|
REQUIRED=(
|
|
./usr/bin/fips
|
|
./usr/bin/fipsctl
|
|
./usr/bin/fipstop
|
|
./usr/bin/fips-gateway
|
|
./usr/bin/fips-mesh-setup
|
|
./usr/bin/fips-ap-setup
|
|
./etc/init.d/fips
|
|
./etc/init.d/fips-gateway
|
|
./etc/fips/fips.yaml
|
|
./etc/fips/firewall.sh
|
|
./etc/dnsmasq.d/fips.conf
|
|
./etc/sysctl.d/fips-gateway.conf
|
|
./etc/sysctl.d/fips-bridge.conf
|
|
./etc/hotplug.d/net/99-fips
|
|
./etc/uci-defaults/90-fips-setup
|
|
./lib/upgrade/keep.d/fips
|
|
)
|
|
for path in "${REQUIRED[@]}"; do
|
|
if grep -Fxq "$path" "$DATA_LIST"; then
|
|
echo " PASS data: $path"
|
|
else
|
|
echo " FAIL data: missing $path"
|
|
fail=1
|
|
fi
|
|
done
|
|
|
|
# Inspect control.tar.gz: must contain control file + maintainer scripts.
|
|
CTRL_LIST="$WORK/control.list"
|
|
tar -tzf "$WORK/control.tar.gz" > "$CTRL_LIST"
|
|
echo "==> control.tar.gz entry count: $(wc -l < "$CTRL_LIST")"
|
|
for path in ./control ./conffiles ./postinst ./prerm; do
|
|
if grep -Fxq "$path" "$CTRL_LIST"; then
|
|
echo " PASS control: $path"
|
|
else
|
|
echo " FAIL control: missing $path"
|
|
fail=1
|
|
fi
|
|
done
|
|
|
|
if [ "$fail" -ne 0 ]; then
|
|
echo "ipk structural verification FAILED"
|
|
exit 1
|
|
fi
|
|
echo "ipk structural verification PASS"
|
|
|
|
- name: SHA-256 hashes
|
|
run: |
|
|
echo "==> Binaries:"
|
|
sha256sum bins/fips bins/fipsctl bins/fipstop
|
|
echo "==> Package:"
|
|
sha256sum dist/${{ env.PACKAGE_FILENAME }}
|
|
|
|
- name: Upload artifact (GitHub only)
|
|
if: ${{ env.ACT != 'true' }}
|
|
uses: actions/upload-artifact@v7
|
|
with:
|
|
name: ${{ env.PACKAGE_FILENAME }}
|
|
path: dist/${{ env.PACKAGE_FILENAME }}
|
|
retention-days: 30
|
|
|
|
- name: Upload to Blossom
|
|
id: blossom_upload
|
|
continue-on-error: true
|
|
shell: bash
|
|
env:
|
|
BLOSSOM_SERVER: "https://blossom.primal.net"
|
|
NSEC: ${{ steps.keys.outputs.nsec }}
|
|
run: |
|
|
: ${GITHUB_OUTPUT:=/tmp/github_output}
|
|
|
|
FILE_HASH=""
|
|
for attempt in 1 2 3; do
|
|
if UPLOAD_RESPONSE=$(nak blossom upload \
|
|
--server "$BLOSSOM_SERVER" \
|
|
--sec "$NSEC" \
|
|
"dist/${{ env.PACKAGE_FILENAME }}" < /dev/null); then
|
|
echo "Upload response (attempt $attempt):"
|
|
echo "$UPLOAD_RESPONSE"
|
|
FILE_HASH=$(echo "$UPLOAD_RESPONSE" | jq -r '.sha256')
|
|
if [ -n "$FILE_HASH" ] && [ "$FILE_HASH" != "null" ]; then
|
|
break
|
|
fi
|
|
echo "Upload response had no sha256 (attempt $attempt)"
|
|
else
|
|
echo "Blossom upload timed out or failed (attempt $attempt)"
|
|
fi
|
|
FILE_HASH=""
|
|
[ "$attempt" -lt 3 ] && sleep $((attempt * 10))
|
|
done
|
|
|
|
if [ -z "$FILE_HASH" ] || [ "$FILE_HASH" = "null" ]; then
|
|
echo "Blossom upload did not succeed after 3 attempts; non-fatal."
|
|
echo "The package still ships as a GitHub release artifact; only the"
|
|
echo "supplementary Blossom/nostr distribution is skipped this run."
|
|
exit 1
|
|
fi
|
|
|
|
BLOSSOM_URL="${BLOSSOM_SERVER}/${FILE_HASH}"
|
|
echo "url=$BLOSSOM_URL" >> "$GITHUB_OUTPUT"
|
|
echo "hash=$FILE_HASH" >> "$GITHUB_OUTPUT"
|
|
echo "Uploaded to Blossom: $BLOSSOM_URL"
|
|
|
|
- name: Publish NIP-94 release event
|
|
id: publish
|
|
if: steps.blossom_upload.outcome == 'success'
|
|
shell: bash
|
|
env:
|
|
RELAYS: "wss://relay.damus.io wss://nos.lol wss://nostr.mom wss://offchain.pub"
|
|
NSEC: ${{ steps.keys.outputs.nsec }}
|
|
run: |
|
|
: ${GITHUB_OUTPUT:=/tmp/github_output}
|
|
set -e
|
|
|
|
VERSION="${{ needs.determine-versioning.outputs.package_version }}"
|
|
CHANNEL="${{ needs.determine-versioning.outputs.release_channel }}"
|
|
|
|
nak event --sec "$NSEC" -k 1063 \
|
|
-c "FIPS Package: ${{ env.PACKAGE_NAME }} for ${{ matrix.openwrt_arch }}" \
|
|
--tag url="${{ steps.blossom_upload.outputs.url }}" \
|
|
--tag m="application/octet-stream" \
|
|
--tag x="${{ steps.blossom_upload.outputs.hash }}" \
|
|
--tag ox="${{ steps.blossom_upload.outputs.hash }}" \
|
|
--tag filename="${{ env.PACKAGE_FILENAME }}" \
|
|
--tag A="${{ matrix.openwrt_arch }}" \
|
|
--tag v="$VERSION" \
|
|
--tag n="${{ env.PACKAGE_NAME }}" \
|
|
--tag format="ipk" \
|
|
--tag compression="none" \
|
|
> event.json 2> event.err
|
|
|
|
if [ ! -s event.json ]; then
|
|
echo "Failed to create event"
|
|
cat event.err 2>/dev/null || true
|
|
exit 1
|
|
fi
|
|
|
|
echo "=== Event JSON ==="
|
|
cat event.json
|
|
echo "=================="
|
|
|
|
EVENT_ID=$(jq -r '.id' event.json)
|
|
if [ -z "$EVENT_ID" ] || [ "$EVENT_ID" = "null" ]; then
|
|
echo "Failed to extract event ID"
|
|
exit 1
|
|
fi
|
|
|
|
# Publish to relays
|
|
cat event.json | nak event $RELAYS 2>&1
|
|
|
|
echo "eventId=$EVENT_ID" >> "$GITHUB_OUTPUT"
|
|
echo "Published NIP-94 event: $EVENT_ID"
|
|
|
|
- name: Verify NIP-94 event on relays
|
|
if: ${{ steps.publish.outputs.eventId != '' }}
|
|
env:
|
|
EVENT_ID: ${{ steps.publish.outputs.eventId }}
|
|
RELAYS: "wss://relay.damus.io wss://nos.lol wss://nostr.mom wss://offchain.pub"
|
|
run: |
|
|
echo "Verifying event $EVENT_ID on relays..."
|
|
FOUND=0
|
|
for relay in $RELAYS; do
|
|
echo "Checking $relay..."
|
|
RESULT=$(nak req -i "$EVENT_ID" "$relay" 2>/dev/null || echo "")
|
|
if [ -n "$RESULT" ]; then
|
|
echo "Found on $relay"
|
|
FOUND=1
|
|
else
|
|
echo "Not found on $relay"
|
|
fi
|
|
done
|
|
|
|
if [ $FOUND -eq 0 ]; then
|
|
echo "Warning: Event not found on any relay yet (may still be propagating)"
|
|
else
|
|
echo "Event verified on at least one relay"
|
|
fi
|
|
|
|
- name: Build Summary
|
|
run: |
|
|
echo "Build Summary for ${{ matrix.openwrt_arch }}:"
|
|
echo " Package: ${{ env.PACKAGE_FILENAME }}"
|
|
echo " Release EventId: ${{ steps.publish.outputs.eventId }}"
|
|
echo " Blossom URL: ${{ steps.blossom_upload.outputs.url }}"
|
|
|
|
build-apk:
|
|
name: Build .apk (${{ matrix.openwrt_arch }})
|
|
runs-on: ubuntu-latest
|
|
needs: [determine-versioning, compile-binaries]
|
|
|
|
strategy:
|
|
fail-fast: false
|
|
matrix:
|
|
# Must be a subset of compile-binaries' arches.
|
|
include:
|
|
- build_arch: aarch64
|
|
openwrt_arch: aarch64_cortex-a53
|
|
# MT3000, MT6000, Flint 2, RPi 3/4/5 on OpenWrt 25+
|
|
- build_arch: x86_64
|
|
openwrt_arch: x86_64
|
|
# x86 routers / VMs on OpenWrt 25+
|
|
|
|
env:
|
|
# apk-tools commit OpenWrt pins for the .apk (ADB) format. Keep in sync
|
|
# with package/system/apk/Makefile in the targeted OpenWrt release so the
|
|
# packages we produce are readable by the apk on the device.
|
|
APK_TOOLS_VERSION: "3.0.5"
|
|
APK_TOOLS_COMMIT: "b5a31c0d865342ad80be10d68f1bb3d3ad9b0866"
|
|
|
|
steps:
|
|
- uses: actions/checkout@v6
|
|
with:
|
|
fetch-depth: 0
|
|
|
|
- name: Set SOURCE_DATE_EPOCH from git
|
|
run: echo "SOURCE_DATE_EPOCH=$(git log -1 --format=%ct)" >> "$GITHUB_ENV"
|
|
|
|
- name: Initialize
|
|
run: |
|
|
PACKAGE_FILENAME=${{ env.PACKAGE_NAME }}_${{ needs.determine-versioning.outputs.package_version }}_${{ matrix.openwrt_arch }}.apk
|
|
echo "PACKAGE_FILENAME=$PACKAGE_FILENAME" >> $GITHUB_ENV
|
|
|
|
- name: Download prebuilt binaries
|
|
uses: actions/download-artifact@v8
|
|
with:
|
|
name: fips-bins-${{ matrix.openwrt_arch }}
|
|
path: bins
|
|
|
|
- name: Install fakeroot
|
|
run: sudo apt-get update && sudo apt-get install -y --no-install-recommends fakeroot
|
|
|
|
# apk mkpkg lives in apk-tools v3, which is not packaged for Ubuntu, so we
|
|
# build the pinned release from source. This is the SDK-free equivalent of
|
|
# how the .ipk path uses plain tar — one small C tool, no OpenWrt SDK.
|
|
- name: Build apk-tools (${{ env.APK_TOOLS_VERSION }}) from source
|
|
run: |
|
|
set -euo pipefail
|
|
sudo apt-get install -y --no-install-recommends \
|
|
git ca-certificates build-essential meson ninja-build pkg-config \
|
|
zlib1g-dev libssl-dev libzstd-dev liblzma-dev lua5.4-dev scdoc
|
|
git clone --quiet https://gitlab.alpinelinux.org/alpine/apk-tools.git /tmp/apk-tools
|
|
cd /tmp/apk-tools
|
|
git checkout --quiet "${APK_TOOLS_COMMIT}"
|
|
meson setup build
|
|
ninja -C build src/apk
|
|
APK_BIN=/tmp/apk-tools/build/src/apk
|
|
"$APK_BIN" --version 2>/dev/null || "$APK_BIN" version 2>/dev/null || true
|
|
echo "APK_BIN=$APK_BIN" >> "$GITHUB_ENV"
|
|
|
|
- name: Build .apk
|
|
env:
|
|
PKG_VERSION: ${{ needs.determine-versioning.outputs.package_version }}
|
|
APK_VERSION: ${{ needs.determine-versioning.outputs.apk_version }}
|
|
run: ./packaging/openwrt-apk/build-apk.sh --arch ${{ matrix.build_arch }} --bin-dir "$GITHUB_WORKSPACE/bins"
|
|
|
|
- name: Verify apk structural integrity
|
|
shell: bash
|
|
run: |
|
|
set -euo pipefail
|
|
APK="dist/${{ env.PACKAGE_FILENAME }}"
|
|
if [ ! -s "$APK" ]; then
|
|
echo "FAIL: produced apk not found or empty at $APK"
|
|
exit 1
|
|
fi
|
|
echo "==> file type:"; file "$APK"
|
|
|
|
# apk v3 packages are ADB containers; dump the whole manifest with the
|
|
# apk-tools we just built. Print it in full so the exact schema is
|
|
# always visible in the log if an assertion needs adjusting.
|
|
DUMP=$(mktemp)
|
|
"$APK_BIN" adbdump "$APK" > "$DUMP" 2>/dev/null || {
|
|
echo "FAIL: 'apk adbdump' could not read $APK"; exit 1; }
|
|
echo "==> full adbdump:"; cat "$DUMP"
|
|
|
|
fail=0
|
|
# Package metadata (flat keys under info:).
|
|
for needle in "name: fips" "version: ${{ needs.determine-versioning.outputs.apk_version }}" "arch: ${{ matrix.openwrt_arch }}"; do
|
|
if grep -qF "$needle" "$DUMP"; then
|
|
echo " PASS meta: $needle"
|
|
else
|
|
echo " FAIL meta: missing '$needle'"; fail=1
|
|
fi
|
|
done
|
|
|
|
# installed-size reflects the bundled binaries (4 stripped Rust
|
|
# binaries, several MB). A payload regression that drops them shows up
|
|
# here regardless of how the path tree is formatted.
|
|
SIZE=$(awk '/^[[:space:]]*installed-size:/ {print $2; exit}' "$DUMP")
|
|
echo " installed-size: ${SIZE:-unknown}"
|
|
if [ -z "${SIZE:-}" ] || [ "$SIZE" -lt 1000000 ]; then
|
|
echo " FAIL: installed-size implausibly small (binaries missing?)"; fail=1
|
|
else
|
|
echo " PASS: installed-size >= 1MB"
|
|
fi
|
|
|
|
# The adbdump paths: block is hierarchical. Each directory is a
|
|
# top-level list item "- name: <full relative dir>"; its files are
|
|
# "- name: <basename>" nested one indent level deeper under "files:".
|
|
# (There are no "path:" keys.) Reconstruct full file paths by keying
|
|
# off the indentation of the directory-level list items.
|
|
RECON=$(awk '
|
|
/^paths:/ {p=1; diri=-1; next}
|
|
p && /^[^ #-]/ {p=0} # a new top-level key ends paths:
|
|
!p {next}
|
|
match($0, /^ *- /) {
|
|
ind=RLENGTH; rest=substr($0, RLENGTH+1)
|
|
if (diri==-1) diri=ind # first list item = directory indent
|
|
if (ind==diri) { # directory entry (or the root acl: entry)
|
|
if (rest ~ /^name: /) { dir=rest; sub(/^name: /,"",dir) } else dir=""
|
|
next
|
|
}
|
|
if (rest ~ /^name: /) { # deeper item = a file under files:
|
|
f=rest; sub(/^name: /,"",f); print (dir==""?f:dir"/"f)
|
|
}
|
|
}
|
|
' "$DUMP")
|
|
echo "==> reconstructed paths:"; printf '%s\n' "$RECON"
|
|
|
|
for path in \
|
|
usr/bin/fips usr/bin/fipsctl usr/bin/fipstop usr/bin/fips-gateway \
|
|
usr/bin/fips-mesh-setup usr/bin/fips-ap-setup \
|
|
etc/init.d/fips etc/init.d/fips-gateway \
|
|
etc/fips/fips.yaml etc/fips/firewall.sh etc/dnsmasq.d/fips.conf \
|
|
etc/sysctl.d/fips-gateway.conf etc/sysctl.d/fips-bridge.conf \
|
|
etc/hotplug.d/net/99-fips etc/uci-defaults/90-fips-setup \
|
|
lib/upgrade/keep.d/fips; do
|
|
if printf '%s\n' "$RECON" | grep -qxF "$path"; then
|
|
echo " PASS path: $path"
|
|
else
|
|
echo " FAIL path: missing $path"; fail=1
|
|
fi
|
|
done
|
|
|
|
if [ "$fail" -ne 0 ]; then
|
|
echo "apk structural verification FAILED"
|
|
exit 1
|
|
fi
|
|
echo "apk structural verification PASS"
|
|
|
|
- name: SHA-256 hashes
|
|
run: |
|
|
echo "==> Binaries:"
|
|
sha256sum bins/fips bins/fipsctl bins/fipstop
|
|
echo "==> Package:"
|
|
sha256sum dist/${{ env.PACKAGE_FILENAME }}
|
|
|
|
- name: Upload artifact (GitHub only)
|
|
if: ${{ env.ACT != 'true' }}
|
|
uses: actions/upload-artifact@v7
|
|
with:
|
|
name: ${{ env.PACKAGE_FILENAME }}
|
|
path: dist/${{ env.PACKAGE_FILENAME }}
|
|
retention-days: 30
|
|
|
|
- name: Install nak
|
|
shell: bash
|
|
run: |
|
|
NAK_VERSION="0.16.2"
|
|
ARCH=$(uname -m)
|
|
case "$ARCH" in
|
|
x86_64|amd64) NAK_ARCH="amd64" ;;
|
|
aarch64|arm64) NAK_ARCH="arm64" ;;
|
|
*) echo "Unsupported architecture: $ARCH"; exit 1 ;;
|
|
esac
|
|
curl -fsSL "https://github.com/fiatjaf/nak/releases/download/v${NAK_VERSION}/nak-v${NAK_VERSION}-linux-${NAK_ARCH}" \
|
|
-o /usr/local/bin/nak
|
|
chmod +x /usr/local/bin/nak
|
|
nak --version
|
|
|
|
- name: Install jq
|
|
run: |
|
|
if ! command -v jq &>/dev/null; then
|
|
sudo apt-get update && sudo apt-get install -y jq
|
|
fi
|
|
|
|
# Priority: HIVE_CI_NSEC from env (loom job) > repo secret > generate ephemeral
|
|
- name: Resolve signing key
|
|
id: keys
|
|
shell: bash
|
|
env:
|
|
SECRET_NSEC: ${{ secrets.HIVE_CI_NSEC }}
|
|
run: |
|
|
: ${GITHUB_OUTPUT:=/tmp/github_output}
|
|
if [ -n "${HIVE_CI_NSEC:-}" ]; then
|
|
echo "Using HIVE_CI_NSEC from loom job environment"
|
|
NSEC="$HIVE_CI_NSEC"
|
|
elif [ -n "$SECRET_NSEC" ]; then
|
|
echo "Using HIVE_CI_NSEC from repository secrets"
|
|
NSEC="$SECRET_NSEC"
|
|
else
|
|
echo "No nsec provided -- generating ephemeral keypair"
|
|
NSEC=$(nak key generate)
|
|
fi
|
|
|
|
PUBKEY=$(echo "$NSEC" | nak key public)
|
|
echo "::add-mask::$NSEC"
|
|
echo "nsec=$NSEC" >> "$GITHUB_OUTPUT"
|
|
echo "pubkey=$PUBKEY" >> "$GITHUB_OUTPUT"
|
|
echo "Publisher pubkey (hex): $PUBKEY"
|
|
|
|
- name: Upload to Blossom
|
|
id: blossom_upload
|
|
continue-on-error: true
|
|
shell: bash
|
|
env:
|
|
BLOSSOM_SERVER: "https://blossom.primal.net"
|
|
NSEC: ${{ steps.keys.outputs.nsec }}
|
|
run: |
|
|
: ${GITHUB_OUTPUT:=/tmp/github_output}
|
|
|
|
FILE_HASH=""
|
|
for attempt in 1 2 3; do
|
|
if UPLOAD_RESPONSE=$(nak blossom upload \
|
|
--server "$BLOSSOM_SERVER" \
|
|
--sec "$NSEC" \
|
|
"dist/${{ env.PACKAGE_FILENAME }}" < /dev/null); then
|
|
echo "Upload response (attempt $attempt):"
|
|
echo "$UPLOAD_RESPONSE"
|
|
FILE_HASH=$(echo "$UPLOAD_RESPONSE" | jq -r '.sha256')
|
|
if [ -n "$FILE_HASH" ] && [ "$FILE_HASH" != "null" ]; then
|
|
break
|
|
fi
|
|
echo "Upload response had no sha256 (attempt $attempt)"
|
|
else
|
|
echo "Blossom upload timed out or failed (attempt $attempt)"
|
|
fi
|
|
FILE_HASH=""
|
|
[ "$attempt" -lt 3 ] && sleep $((attempt * 10))
|
|
done
|
|
|
|
if [ -z "$FILE_HASH" ] || [ "$FILE_HASH" = "null" ]; then
|
|
echo "Blossom upload did not succeed after 3 attempts; non-fatal."
|
|
echo "The package still ships as a GitHub release artifact; only the"
|
|
echo "supplementary Blossom/nostr distribution is skipped this run."
|
|
exit 1
|
|
fi
|
|
|
|
BLOSSOM_URL="${BLOSSOM_SERVER}/${FILE_HASH}"
|
|
echo "url=$BLOSSOM_URL" >> "$GITHUB_OUTPUT"
|
|
echo "hash=$FILE_HASH" >> "$GITHUB_OUTPUT"
|
|
echo "Uploaded to Blossom: $BLOSSOM_URL"
|
|
|
|
- name: Publish NIP-94 release event
|
|
id: publish
|
|
if: steps.blossom_upload.outcome == 'success'
|
|
shell: bash
|
|
env:
|
|
RELAYS: "wss://relay.damus.io wss://nos.lol wss://nostr.mom wss://offchain.pub"
|
|
NSEC: ${{ steps.keys.outputs.nsec }}
|
|
run: |
|
|
: ${GITHUB_OUTPUT:=/tmp/github_output}
|
|
set -e
|
|
|
|
VERSION="${{ needs.determine-versioning.outputs.package_version }}"
|
|
CHANNEL="${{ needs.determine-versioning.outputs.release_channel }}"
|
|
|
|
nak event --sec "$NSEC" -k 1063 \
|
|
-c "FIPS Package: ${{ env.PACKAGE_NAME }} for ${{ matrix.openwrt_arch }} (apk)" \
|
|
--tag url="${{ steps.blossom_upload.outputs.url }}" \
|
|
--tag m="application/octet-stream" \
|
|
--tag x="${{ steps.blossom_upload.outputs.hash }}" \
|
|
--tag ox="${{ steps.blossom_upload.outputs.hash }}" \
|
|
--tag filename="${{ env.PACKAGE_FILENAME }}" \
|
|
--tag A="${{ matrix.openwrt_arch }}" \
|
|
--tag v="$VERSION" \
|
|
--tag n="${{ env.PACKAGE_NAME }}" \
|
|
--tag format="apk" \
|
|
--tag compression="none" \
|
|
> event.json 2> event.err
|
|
|
|
if [ ! -s event.json ]; then
|
|
echo "Failed to create event"
|
|
cat event.err 2>/dev/null || true
|
|
exit 1
|
|
fi
|
|
|
|
echo "=== Event JSON ==="
|
|
cat event.json
|
|
echo "=================="
|
|
|
|
EVENT_ID=$(jq -r '.id' event.json)
|
|
if [ -z "$EVENT_ID" ] || [ "$EVENT_ID" = "null" ]; then
|
|
echo "Failed to extract event ID"
|
|
exit 1
|
|
fi
|
|
|
|
# Publish to relays
|
|
cat event.json | nak event $RELAYS 2>&1
|
|
|
|
echo "eventId=$EVENT_ID" >> "$GITHUB_OUTPUT"
|
|
echo "Published NIP-94 event: $EVENT_ID"
|
|
|
|
- name: Build Summary
|
|
run: |
|
|
echo "Build Summary for ${{ matrix.openwrt_arch }} (apk):"
|
|
echo " Package: ${{ env.PACKAGE_FILENAME }}"
|
|
echo " apk version: ${{ needs.determine-versioning.outputs.apk_version }}"
|
|
echo " Release EventId: ${{ steps.publish.outputs.eventId }}"
|
|
echo " Blossom URL: ${{ steps.blossom_upload.outputs.url }}"
|
|
|
|
release:
|
|
name: Publish GitHub Release (github only)
|
|
runs-on: ubuntu-latest
|
|
needs: [build, build-apk]
|
|
if: startsWith(github.ref, 'refs/tags/')
|
|
permissions:
|
|
contents: write
|
|
|
|
steps:
|
|
- name: Download package artifacts
|
|
uses: actions/download-artifact@v8
|
|
with:
|
|
# Only the .ipk/.apk packages (named fips_<ver>_<arch>.*), not the
|
|
# fips-bins-* raw-binary artifacts shared between the build jobs.
|
|
pattern: fips_*
|
|
path: dist
|
|
merge-multiple: true
|
|
|
|
- name: Generate OpenWrt release checksums
|
|
run: |
|
|
cd dist
|
|
find . -maxdepth 1 -type f \( -name '*.ipk' -o -name '*.apk' \) -printf '%P\n' \
|
|
| LC_ALL=C sort \
|
|
| xargs sha256sum \
|
|
> checksums-openwrt.txt
|
|
|
|
- name: Create release
|
|
uses: softprops/action-gh-release@v2
|
|
with:
|
|
files: |
|
|
dist/*.ipk
|
|
dist/*.apk
|
|
dist/checksums-openwrt.txt
|
|
generate_release_notes: true
|