fips/docs/design/fips-session-layer.md

# FIPS Session Protocol (FSP)

The FIPS Session Protocol is the top protocol layer in the FIPS stack. It sits
above the FIPS Mesh Protocol (FMP) and below applications (native FIPS API or
IPv6 adapter). FSP provides end-to-end authenticated, encrypted datagram
delivery between any two FIPS nodes, regardless of how many intermediate hops
separate them.

## Role

FSP manages end-to-end communication sessions between FIPS nodes identified by
their public keys (npubs). Each session provides:

- **End-to-end encryption**: Payload confidentiality independent of how many
  intermediate nodes handle the traffic
- **Mutual authentication**: Both parties prove they control the private key
  for their claimed identity
- **Replay protection**: Counter-based nonces with sliding window, tolerant of
  UDP packet loss and reordering
- **Transport independence**: Sessions survive transport changes, route
  changes, and address changes — they are bound to npub identities, not to
  transport paths

FSP is a datagram session protocol. It provides encrypted datagrams, not
reliable streams. There is no FIPS equivalent of TCP; if applications need
reliability, ordering, or flow control, they provide it themselves (typically
by running TCP over the FIPS IPv6 adapter).

## Services Provided to Applications

Applications access the FIPS mesh through two interfaces, both served by FSP:

### Native FIPS API

Applications address destinations directly by npub or public key. The FIPS
stack resolves the destination's node_addr, establishes or reuses a session,
encrypts the payload, and routes through FMP. No DNS involvement.

### IPv6 Adapter

Unmodified IPv6 applications use a TUN device with `fd::/8` routing. A local
DNS service maps npub → IPv6 address and primes the identity cache. Packets
arriving at the TUN are translated to FIPS datagrams and routed through FSP.

See [fips-ipv6-adapter.md](fips-ipv6-adapter.md) for the IPv6 adaptation
layer.

### What Applications Get

- **Authenticated datagram delivery**: Each datagram is encrypted and
  authenticated with session keys bound to both parties' npubs
- **Session transparency**: Sessions are established on demand and maintained
  automatically. Applications send packets; FSP handles session setup,
  encryption, and teardown.
- **Endpoint identity**: Applications address destinations by npub. The FIPS
  address is the public key.

### What Applications Do Not Get

- **Reliability**: Datagrams may be lost, duplicated, or delivered out of
  order. FSP provides no retransmission or ordering.
- **Path MTU discovery**: FSP does not signal MTU to applications. The IPv6
  adapter handles MTU enforcement via ICMP Packet Too Big and TCP MSS
  clamping.
- **Congestion control**: FSP does not throttle traffic. Applications running
  TCP over IPv6 get TCP's congestion control; native API applications must
  manage their own sending rate.

## Services Required from FMP

FSP treats FMP as a black box providing three services. FSP knows nothing about
transports, transport addresses, links, peers, spanning trees, coordinates,
bloom filters, hop counts, or network topology.

### SessionDatagram Forwarding

FMP accepts a SessionDatagram (source node_addr, destination node_addr, TTL,
path MTU, payload) and delivers it best-effort toward the destination. Delivery
may traverse multiple hops, each with independent link encryption.

### Error Signaling

FMP signals routing failures asynchronously:

- **CoordsRequired**: A transit node lacks the destination's tree coordinates.
  FSP responds by sending a standalone CoordsWarmup (0x14) message
  (rate-limited), re-initiating discovery, and resetting the coordinate warmup
  counter.
- **PathBroken**: Greedy routing reached a dead end. FSP responds by sending
  a standalone CoordsWarmup (rate-limited), re-discovering the destination's
  current coordinates, and resetting the warmup counter.

Both signals are generated by transit nodes (not the destination) and travel
back to the source inside a new SessionDatagram. They are plaintext (not
end-to-end encrypted) because transit nodes have no session with the source.

### Local Delivery

When a SessionDatagram arrives with a destination node_addr matching the local
node, FMP delivers it to FSP for session-layer processing.

## Session Lifecycle

### Session Establishment

Sessions are established on demand when the first datagram needs to be sent to
a destination with no existing session.

FSP uses Noise IK for session key agreement. The initiator knows the
destination's npub (from DNS lookup or native API); the responder learns the
initiator's identity from the handshake. This is the same asymmetry as
link-layer peer connections.

The handshake is carried in SessionSetup and SessionAck messages:

1. **Initiator** sends SessionSetup containing Noise IK msg1 and both
   parties' tree coordinates
2. **Responder** processes msg1, learns initiator identity, sends SessionAck
   containing Noise IK msg2 and both parties' tree coordinates
3. Both parties derive identical symmetric session keys

Packets that trigger session establishment are queued (with bounded buffer)
and transmitted after the session is established.

### Self-Bootstrapping

SessionSetup is self-bootstrapping for routing. It carries the source's and
destination's tree coordinates in the clear (not inside the Noise payload).
As the message transits intermediate nodes, each node caches these coordinates,
warming the path for subsequent data packets that carry only addresses (no
coordinates).

SessionAck carries both the responder's and initiator's coordinates back
along the reverse path, warming caches in the other direction. This ensures
return-path transit nodes can route even when the reverse path diverges from
the forward path (e.g., after tree reconvergence).

### Simultaneous Initiation

When both nodes attempt to establish a session simultaneously ("crossing
hellos"), a deterministic tie-breaker resolves the conflict:

- If `local_node_addr < remote_node_addr`: Continue as initiator, ignore
  incoming setup
- If `local_node_addr > remote_node_addr`: Abort own initiation, switch to
  responder role

This ensures exactly one handshake completes.

### Data Transfer

Once established, sessions carry encrypted data using the FSP pipeline. Each
encrypted message includes:

- A 12-byte cleartext header (used as AEAD AAD) containing the counter and
  flags (including the CP flag for coordinate cache warming)
- Optional cleartext coordinates when the CP flag is set
- An AEAD-encrypted payload containing a 6-byte inner header (session-relative
  timestamp, message type, inner flags) followed by the application data

### Session Idle Timeout

Sessions that see no traffic for a configurable duration (default 90s) are
torn down. When traffic resumes, a new session is established automatically.

Only DataPacket (message type 0x10) send/receive and session establishment
reset `last_activity`. MMP traffic — SenderReport, ReceiverReport, and
PathMtuNotification — does not reset the idle timer. This means a session
carrying only MMP reports and no application data will still tear down after
`node.session.idle_timeout_secs`. MMP reports continue flowing until the
session is torn down, providing final measurement data for the teardown log.

The idle timeout is deliberately shorter than the coordinate cache TTL (300s).
This ordering ensures that when traffic stops and the session tears down, the
transit node coordinate caches are still warm when a new session is established.
The fresh SessionSetup re-warms the caches, maintaining routing continuity.

### Session Independence from Transport

Sessions exist above the routing layer and are bound to npub identities, not
transport addresses or routing paths. A session survives:

- Transport failover (UDP → Ethernet → back to UDP)
- Route changes (different intermediate hops)
- Transport address changes (IP address or port changes)
- Topology changes (direct peer becomes multi-hop or vice versa)

## End-to-End Encryption

### Noise IK Pattern

FSP uses the same Noise IK pattern as FMP link encryption, but with
independent keys and sessions. The full Noise descriptor is
`Noise_IK_secp256k1_ChaChaPoly_SHA256`.

The IK pattern:

- **msg1** (`→ e, es, s, ss`): Initiator sends ephemeral key, encrypts static
  key to responder. Four DH operations establish session keys.
- **msg2** (`← e, ee, se`): Responder sends ephemeral key. Both parties now
  share identical session keys.

After the handshake, Noise produces two directional symmetric keys
(`send_key`, `recv_key`) used with ChaCha20-Poly1305 for all subsequent data.

### Cryptographic Primitives

| Component | Choice | Notes |
| --------- | ------ | ----- |
| Curve | secp256k1 | Nostr-native |
| DH | ECDH on secp256k1 | Standard EC Diffie-Hellman |
| Cipher | ChaCha20-Poly1305 | AEAD, same as NIP-44 |
| Hash | SHA-256 | Nostr-native |
| Key derivation | HKDF-SHA256 | Standard Noise KDF |

These choices prioritize compatibility with the Nostr cryptographic stack.

### secp256k1 Parity Normalization

Nostr npubs encode x-only public keys (32 bytes, no y-coordinate parity). The
Noise IK pre-message mixes the responder's static key as a 33-byte compressed
key, and the default secp256k1 ECDH hash includes a parity-dependent version
byte.

Both operations are normalized to be parity-independent: the pre-message hash
uses even parity (`0x02` prefix), and ECDH hashes only the x-coordinate of the
result point. This ensures handshakes succeed regardless of the responder's
actual key parity.

### Privacy Note

Noise IK does not provide initiator anonymity if the responder's static key is
compromised. An attacker who obtains the responder's nsec can decrypt the
initiator's identity from captured handshake messages. Noise XK would protect
initiator identity in this scenario but requires an additional round-trip (3
handshake messages vs. 2). The privacy/latency tradeoff may be revisited with
deployment experience.

### Data Packet Authentication

FSP uses AEAD authentication only — no per-packet signatures. The Noise
handshake binds session keys to both parties' static keys, so only holders of
the corresponding nsecs can derive the session keys. This provides implicit
authentication for every packet, matching WireGuard and Lightning's approach.

### Forward Secrecy

Ephemeral keys in the Noise handshake provide forward secrecy. Compromise of
static keys (nsec) does not reveal past session keys, because session keys are
derived in part from ephemeral-ephemeral DH (`ee`), and ephemeral keys are
discarded after the handshake.

## Replay Protection

FSP uses explicit 8-byte counters on the wire for replay protection. Each side
maintains a monotonically increasing send counter, included in the 12-byte
cleartext header of every encrypted message. The receiver maintains a sliding
window (2048-entry bitmap) tracking which counters have been seen.

This design is critical for operation over unreliable transports. Under UDP
packet loss or reordering, implicit nonce counters (where the receiver
increments on each decrypt attempt) would desynchronize permanently — a failed
`decrypt()` increments the nonce, and the desync grows with each lost packet.
Explicit counters allow the receiver to decrypt any packet independently,
regardless of what packets were lost or reordered.

The same `ReplayWindow` and `decrypt_with_replay_check()` implementation is
used at both the link and session layers.

## Hybrid Coordinate Warmup Strategy

Session establishment (SessionSetup/SessionAck) warms transit node coordinate
caches along the path. But coordinate caches have a finite TTL (default 300s),
and entries may be evicted under memory pressure. When a transit node's cache
entry expires, it cannot forward data packets (which carry only addresses, not
coordinates) and sends a CoordsRequired error.

FSP uses a hybrid warmup strategy combining proactive piggybacking with
reactive standalone messages to keep transit caches populated:

### Proactive Warmup Phase

After session establishment, the first N data packets (configurable, default 5)
per session attempt to piggyback source and destination coordinates via the CP
flag in the FSP common prefix. The coordinates appear in cleartext between the
12-byte header and the ciphertext, allowing transit nodes to cache them without
decryption.

If piggybacking coordinates would cause the total packet to exceed the
transport MTU, the source sends a standalone **CoordsWarmup** message (0x14)
first, followed by the data packet without the CP flag. This ensures transit
caches are warmed even when data packets are near the MTU limit.

### CoordsWarmup Message (0x14)

CoordsWarmup is an encrypted FSP message (phase 0x0) with the CP flag set and
inner msg_type 0x14. It carries cleartext source and destination coordinates
between the FSP header and the AEAD ciphertext, using the same format as
CP-flagged data packets. The inner body is empty — the message exists solely
to deliver coordinates to transit nodes.

Transit nodes extract coordinates via the existing `try_warm_coord_cache()`
code path with zero changes to the transit forwarding logic. CoordsWarmup is
indistinguishable from any other CP-flagged message at the transit layer.

Wire format:

```text
FSP header (12 bytes, AAD): ver=0, phase=0, flags=CP, counter, payload_len
Cleartext coords: src_coords + dst_coords (same encoding as CP flag)
AEAD ciphertext: inner_header(6) + Poly1305 tag(16) = 22 bytes

Total FSP payload: 12 + coords + 22
```

### Steady State

After the warmup count is reached, FSP clears the CP flag and sends minimal
data packets (12-byte header + ciphertext). Transit nodes serve from their
coordinate caches.

### Reactive Re-Warm

When FSP receives a CoordsRequired or PathBroken signal:

1. A standalone CoordsWarmup message is sent immediately to re-warm transit
   caches, rate-limited at one per destination per configurable interval
   (default 2000ms, `node.session.coords_response_interval_ms`)
2. The warmup counter resets — subsequent data packets piggyback coordinates
   again when possible (or send additional CoordsWarmup messages when the
   data packet would exceed the MTU)
3. A new LookupRequest may be initiated to rediscover the destination's
   current coordinates (always for PathBroken; optionally for CoordsRequired)
4. When the LookupResponse arrives for an established session, the warmup
   counter resets again (handling the timing gap where warmup packets might
   fire before transit caches are repopulated by discovery)

The source-side rate limiting prevents amplification: at most one standalone
CoordsWarmup response per destination per `coords_response_interval_ms`
(default 2s). This is independent of the transit-node rate limiting on error
signal generation (100ms per destination).

### Warmup State Machine

```text
        ┌──────────────┐
        │    WARMUP    │ ◄── Send first N packets with coords (CP or CoordsWarmup)
        └──────┬───────┘
               │ N packets sent without CoordsRequired
               ▼
        ┌──────────────┐
        │   MINIMAL    │ ◄── Send packets without coords
        └──────┬───────┘
               │ CoordsRequired or PathBroken received
               ▼
        ┌──────────────────────────┐
        │ SEND CoordsWarmup (0x14) │ ◄── Immediate standalone warmup (rate-limited)
        └──────────┬───────────────┘
                   │
                   ▼
        ┌──────────────┐
        │    WARMUP    │ ◄── Counter reset, piggyback coords again
        └──────────────┘
```

## Identity Cache

The identity cache maps FIPS address prefix (15 bytes, the `fd::/8` IPv6
address minus the `fd` prefix) to `(NodeAddr, PublicKey)`. This cache is
needed only when using the IPv6 adapter — the native FIPS API provides the
public key directly.

The mapping is deterministic (derived from the public key via SHA-256) and
never becomes stale. The cache uses LRU-only eviction bounded by a
configurable size (default 10K entries). There is no TTL — entries are evicted
only when the cache is full and space is needed for a new entry.

Cache population mechanisms:

- **DNS lookup**: The primary path. Resolving `npub1xxx...xxx.fips` derives
  the IPv6 address and populates the identity cache.
- **Inbound traffic**: Authenticated sessions from other nodes populate the
  cache with their identity information.

## Coordinate Cache

The coordinate cache maps `NodeAddr → TreeCoordinate` and is the critical
data structure that enables efficient multi-hop routing. Without cached
coordinates for a destination, FMP cannot make forwarding decisions and must
either fall back to bloom-filter-only routing or signal CoordsRequired.

### Unified Cache

The coordinate cache is a single unified cache (merged from previously
separate coord_cache and route_cache). All coordinate sources — SessionSetup
transit, CP-flagged data packets, LookupResponse — write to the same cache.

### Eviction Policy

- **TTL-based expiration**: Entries expire after a configurable duration
  (default 300s)
- **Refresh on use**: Active routing through a cache entry resets its TTL,
  keeping hot entries alive
- **LRU eviction**: When the cache is full, least recently used entries are
  evicted first
- **Flush on parent change**: When the local node's tree parent changes, the
  entire coordinate cache is flushed. Tree parent changes mean the node's own
  coordinates have changed, making cached coordinates for other nodes
  potentially stale for routing purposes.

### Timer Ordering

Cache and session timers are ordered so that idle sessions tear down before
transit caches expire:

| Timer | Default | Purpose |
| ----- | ------- | ------- |
| Session idle timeout | 90s | Tear down unused sessions |
| Coordinate cache TTL | 300s | Expire stale coordinates |
| DNS TTL | 300s | Expire DNS resolutions |

When traffic stops: the session tears down at 90s. When traffic resumes: DNS
re-resolves the identity, a fresh SessionSetup carries coordinates, and transit
node caches (still within their 300s TTL) are re-warmed.

## Session-Layer MMP

Each established session runs its own Metrics Measurement Protocol instance,
providing end-to-end quality metrics independent of the number of hops.

### Relationship to Link-Layer MMP

Session-layer MMP uses the same report wire format (SenderReport 0x11,
ReceiverReport 0x12) and identical algorithms as link-layer MMP, but with
two key differences:

1. **End-to-end routing**: Session reports are encrypted and forwarded through
   every transit link. A 3-hop session generates report traffic on all 3 links,
   making bandwidth cost proportional to path length.
2. **Independent configuration**: The `node.session_mmp.*` parameters are
   separate from `node.mmp.*`, allowing operators to run a lighter mode for
   sessions (e.g., Lightweight) while keeping Full mode on links.

### Metrics

The same metrics as link-layer MMP: SRTT, loss rate, jitter, goodput, OWD
trend, ETX, and dual EWMA trends. Session MMP additionally tracks observed
path MTU.

### Report Intervals

Session-layer report intervals are higher than link-layer to account for
bandwidth cost: clamped to [500ms, 10s] with a cold-start interval of 1s
(vs. link-layer [100ms, 2s] with 500ms cold-start).

### Path MTU Tracking

PathMtuNotification (message type 0x13) provides end-to-end path MTU
feedback:

1. The source sets `path_mtu` in each SessionDatagram envelope to its
   outbound link MTU.
2. Each transit node applies `min(current, transport.mtu())` before
   forwarding.
3. The destination receives the forward-path minimum and sends a
   PathMtuNotification (2-byte body: u16 LE path_mtu) back to the source.
4. The source applies the notification with hysteresis:
   - **Decrease**: immediate (take lower value).
   - **Increase**: requires 3 consecutive higher-value notifications spanning
     at least 2 × notification interval.
5. Notifications are sent on first measurement, on any decrease, and
   periodically at `max(10s, 5 × SRTT)`.

### Idle Timeout Interaction

MMP reports (SenderReport, ReceiverReport) and PathMtuNotification do **not**
reset the session idle timer. Only application data (DataPacket, type 0x10)
resets `last_activity`. This ensures sessions with no application traffic
tear down after `node.session.idle_timeout_secs` (default 90s), while MMP
continues providing measurement data up to the teardown moment.

### Operator Logging

Session metrics are logged at info level (configurable via
`node.session_mmp.log_interval_secs`, default 30s):

```text
MMP session metrics session=npub1tdwa...84le rtt=4.3ms loss=0.6% jitter=0.2ms goodput=71.3MB/s mtu=1472 tx_pkts=1234 rx_pkts=5678
```

## Implementation Status

| Feature | Status |
| ------- | ------ |
| Session establishment (Noise IK) | **Implemented** |
| End-to-end encryption (ChaCha20-Poly1305) | **Implemented** |
| Explicit counter replay protection | **Implemented** |
| Hybrid coordinate warmup (CP + CoordsWarmup) | **Implemented** |
| FSP wire format (prefix, AAD, inner header) | **Implemented** |
| Session-layer MMP | **Implemented** |
| Identity cache (LRU-only) | **Implemented** |
| Coordinate cache (unified, TTL + refresh) | **Implemented** |
| Session idle timeout | **Implemented** |
| CoordsRequired handling | **Implemented** |
| PathBroken handling | **Implemented** |
| Simultaneous initiation tie-breaker | **Implemented** |
| Flush coord cache on parent change | **Implemented** |
| Rekey | Planned |
| Path MTU tracking (FMP SessionDatagram field) | **Implemented** |
| Path MTU notification (end-to-end echo) | **Implemented** |

## References

- [fips-intro.md](fips-intro.md) — Protocol overview and architecture
- [fips-mesh-layer.md](fips-mesh-layer.md) — FMP specification (below FSP)
- [fips-ipv6-adapter.md](fips-ipv6-adapter.md) — IPv6 adaptation layer (above FSP)
- [fips-mesh-operation.md](fips-mesh-operation.md) — Routing, discovery, and
  error recovery
- [fips-wire-formats.md](fips-wire-formats.md) — Wire format reference for all
  session message types