Forward-merge the state-carrier collapse (connection start/activity timestamps,
peer-identity telemetry, handshake resend buffers, index/transport bookkeeping,
and the session-index shadow all moved onto the peer machine's own connection
state) onto the XX handshake.
Next-specific resolutions folded into the merge: the responder learns its transport
id and peer index at msg1 and they are written directly onto the machine there (the
XX machine has no msg1 step, so the promote read would otherwise be unset); the
negotiated peer profile is mirrored onto the machine carrier at both the initiator
(msg2) and responder (msg3) negotiation sites; and the outbound carrier writes land
on both the identified and anonymous dial paths. The leg's transport/index/buffer
copies remain as dead duplicates until the leg dissolves; the machine copy is the
sole live source.
The session index was carried three ways: on the leg, on the peer machine's own
connection-state copy, and on a separate machine-owned shadow field. Populate the
machine's connection copy on the outbound path (it was written only on the inbound
and cross-connection-swap paths before), then delete the shadow field and route its
readers, the decrypt-registration lifecycle, and the rekey cutover through the
single carrier. The shadow and the connection copy diverged only on paths that are
unreachable or dormant in production (a rekey cutover with no newly allocated index,
the swap winner's later reads, and the never-dispatched timeout/disconnect events),
so the merge is byte-identical for every reachable path. Rewrote the outbound-promote
index tests and the dial-time comment for the single-carrier contract.
The connection leg's their_index, transport_id and link_stats duplicated the peer
machine's own connection-state copy. Route every production reader through the
machine copy: promotion, the stale-connection reaper, the outbound msg1 resend, and
the in-use / connecting-path checks. Seed the inbound machine's transport_id from the
msg1 packet (the same source the leg used), matching the outbound dial seed, so the
hard-required promote read never sees a missing transport. link_stats is a
never-mutated zero seed, so its leg accessors are removed outright; the leg
their_index/transport_id getters/setters remain only for the test-only connection
builder. Also delete the write-only next_resend_at_ms field from the connection
state (the resend deadline is carried by the machine-armed retransmit timer, not this
field). Byte-identical.
The connection leg's stored msg1/msg2 handshake-resend buffers duplicated the
peer machine's own connection-state copy. Write the machine copy at the outbound
msg1-prep and the two inbound authorize sites, then source the retransmit
resend-bytes reader, send_stored_msg1, and the pending tier of find_stored_msg2
from the machine. The post-promote active-peer msg2 copy is written from the same
wire bytes, so the pending tier now matching after promotion is value-identical.
Byte-identical resend behavior.
The expected_peer connection-row field read the peer identity off the leg;
source it from the machine's own connection-state copy instead, matching the
started_at/last_activity treatment. The machine carrier holds the same identity
as the leg for every connection that appears in the view: outbound legs seed
both from the dialed identity, and inbound legs never rest in the connections
view (the machine takes the leg at promotion), so their machine copy is
unobserved. The leg accessor stays for the crypto-extraction path and retry
decisions. Byte-identical.
The connection leg's started_at and last_activity duplicated the peer
machine's own connection-state copy. Make the machine copy the sole live
telemetry and timeout carrier: re-stamp it with the leg's provenance when
the leg is attached at handshake start (the msg1-prep clock, not the earlier
dial-time constructor value) and mirror the completion touch, then delete the
leg's last_activity/touch accessors and source the connection-row projection,
show_connections, and the timeout readers from the machine. Byte-identical
for all normal paths.
Re-express the handshake-state carrier collapse onto the XX code: the leg's
handshake_state field is deleted and the displayed state is derived from the
peer machine's phase, with failure carried on the machine (a send_failed flag
that preserves the handshake phase) rather than on the leg. The next projection
maps the SentMsg2 responder phase to received_msg1 and the anonymous-dial
Discovered phase to sent_msg1; the three initiator send-failure sites carry
failure via send_failed. Telemetry strings, wire bytes, index allocation, and
stale-connection reaping are byte-identical to next.
The connection leg's HandshakeState field duplicated the peer machine's
handshake phase. Delete it and derive the displayed handshake state string
from the machine's PeerState, looked up by link id (mirroring the resend
count). Move the failure signal onto the machine: a send_failed flag that
preserves retransmit eligibility (the machine stays in its handshake phase),
alongside the existing Failed state. The leg's crypto self-gates now guard on
Noise handle presence instead of the deleted phase field, and mark_failed
only drops the handle. Telemetry strings, wire bytes, index allocation, and
the stale-connection reaping are byte-identical for all normal paths.
handle_msg3 now routes on the InboundDecision returned by the machine's
inbound_msg3 call, instead of computing establish_inbound in the shell and
handling the terminal arms inline. The DualRekeyWon and ResendMsg2 arms'
index free moves to the machine's FreeIndex action (run through the
executor); the ResendMsg2 stored-msg2 resend stays inline. The pre-decision
reject gates and the proceed-arm bodies are unchanged.
Behavior-neutral: the same establish_inbound decision over the same snapshot
and wire, evaluated once in the machine, with a byte-identical free-count on
every arm and no change to wire sends, machine state, or telemetry.
on_inbound_msg3 becomes inbound_msg3, returning the InboundDecision
alongside the machine-phase actions so a caller can route on it; the step
arm delegates and drops the decision. The signature is unchanged, so
step-driven callers are untouched.
Also drop two emissions that are dead on the live path: the ResendMsg2
arm's SendHandshake (the stored-msg2 resend is a driver mechanism the
executor would otherwise reframe) and the dormant inbound-msg1 arm's
retransmit timer. No live behavior changes.
Carries the inbound establish-decision reshape from the IK line. Next's XX
inbound surface already computes that decision on its own machine, so the
merge records the shared history without changing next's tree.
handle_msg1 now creates one local machine before classification and routes
on the InboundDecision it returns, instead of calling establish_inbound in
the shell and re-deriving the decision inside each arm. The promote and
restart arms drop their own per-arm machine construction and the redundant
InboundMsg1 step; their phase-1 actions come from the single call. The
effect-bearing arm bodies (rekey-respond, duplicate resend, reject
bookkeeping, and the promote/restart tails) are unchanged.
Behavior-neutral: the same establish_inbound evaluation over the same
snapshot and wire, done once in the machine method rather than once in the
shell, with byte-identical arm bodies and no change to index allocation,
wire sends, machine state, or telemetry.
The inbound msg1 machine arm re-derived the establish decision for
its own action selection while the shell matched on a separately
computed copy. Expose the arm as a method returning the decision
alongside the actions so a driver can route on it directly; the
step dispatch delegates and keeps its action-only shape.
The dead rekey-respond arm is stripped to decision-only and its
helper deleted: it allocated from the real index allocator, wrote
the rekey shadow index, emitted a wrong-framed rekey send, stamped
the dampening clock, and flipped state, none of which happens on
the live path, where the inline respond body owns all effects. The
resend-msg2 arm's send emission is stripped the same way; the
decision already carries the stored bytes.
send_stored_msg1 marked the embedded leg failed by writing it
directly from the shell. Route the write through a new
HandshakeSendFailed machine event instead: the machine marks its
leg so the stale-connection sweep reclaims it, without leaving the
handshaking state, so retransmit eligibility survives the window
between the failed send and the sweep exactly as before.
send_stored_msg1 gains a now_ms parameter threaded from the action
executor for the step call; the failure arm itself ignores it.
handle_msg2 no longer pre-computes establish_outbound alongside the
machine's own evaluation of the same snapshot. The shell now builds
the snapshot, steps the persistent outbound machine once at the
decision point, and routes on what comes back: the promote action
vector drives promotion through the executor as before, and the
ResolveCrossConnection decision selects the inline swap/keep
resolution bodies, which are unchanged.
The machine step and its defensive transient-rebuild move up from
the promote arm to the decision point; the cross-connection path
keeps its take-leg-then-dispose ordering with the step preceding
both. Comment prose at the touched sites refreshed to describe the
single-decision-site shape.
The machine's on_msg2 cross-connection arms crystallized state and
emitted FreeIndex/RegisterDecryptSession actions that duplicate the
inline shell resolution, but they are unreachable on the live path
(the shell removes the machine before running the swap/keep bodies).
Making them live in that shape would double-free the outbound index
through the executor.
Strip both arms to a single new ResolveCrossConnection { swap }
action: a decision conveyed to the driver, not an effect. The shell
intercepts it and runs the inline resolution, which owns all effects
permanently. The action executor gets a defensive unreachable arm.
The Promote arm and set_their_index are unchanged.
Carries the leg-embed storage move: PeerMachine.leg replaces the
Node.connections map. Hand-resolved onto the XX surfaces keeping this
line's semantics with the new storage: the msg3 termination arms and
executor swap/rekey-responder teardowns keep their exact cleanup sets
and index-free behavior; the msg2 cross-connection extract takes the
leg before the unconditional machine dispose; msg1 and anonymous leg
births embed the leg at machine insertion; the rekey-vs-establish gate
tests leg-absence. The merge also drops the now-redundant explicit
machine inserts next to the seeded test seam, whose auto-merged
combination clobbered leg-carrying machines.
The pending-handshake PeerConnection map and the per-peer control
machine map were parallel LinkId-keyed structures whose keysets must
stay coherent by hand. With every leg now born with a machine, the leg
becomes storage inside its machine (leg: Option<PeerConnection>, pure
storage the machine never reads or drives) and Node loses the
connections field; every access routes through the machine.
The non-mechanical lowerings, each argued at the site: the
rekey-vs-establish gate in handle_msg2 tests leg-absence (an established
peer's machine stays keyed by its link, so machine-presence would
misclassify every rekey msg2 as a fresh establish); the
connecting-predicates, peering observation, and handshake-slot budget
iterate machines-with-legs so connect-window machines (leg not yet
born) are excluded exactly as before and never double-counted against
their pending-connect slot; the cross-connection extract takes the leg
before disposing the machine; the stale reaper takes the leg and leaves
the machine untouched when none is present, matching the old early
return. The map-coherence debug check keeps its machine-has-carrier
direction with the embedded leg as a carrier; the leg-to-machine
direction is now true by construction and its gate const is gone.
connection_count() counts machines with legs; the connections()
iterator, the test seams, and the control-socket connection rows are
re-implemented over the embedded legs with unchanged output.
The anonymous-discovery dial paths drove no control machine: the leg was
born bare in start_handshake and a throwaway machine appeared only at
msg2. Anonymous legs now birth a persistent identity-less machine
alongside the leg (new_outbound widened to Option<PeerIdentity>, backed
by the existing identity-less outbound connection state), and handle_msg2
crystallizes the learned identity onto it before stepping. The msg2
missing-machine arm becomes defensive recovery (debug-assert + insert,
matching the IK line), and the self-connect drop arm disposes the
machine it previously leaked — reachable from identified dials too,
since the handshake completion overwrites the expected identity without
comparing it to the dial-time expectation. The self-connect arm's
index/link/pending-entry leak is pre-existing and stays as-is.
With every leg now born with a machine, the leg-to-machine direction of
the debug coherence check switches on for this line. The add_connection
test seam seeds direction-faithful machines (an outbound-anonymous
seeded connection previously got an inbound-shaped one), and the
hand-rolled dial sites in tests seed dial machines mirroring
production. New tests pin the identity-less birth, the msg2 identity
crystallization through promote, and the self-connect disposal.
The inbound control machine was a msg3-time throwaway: handle_msg3 built
a transient, stepped it once for the decision, and discarded it, with
promote_connection birthing a fresh established() machine. Every
handshake leg now gets one persistent machine for its whole life:
- handle_msg1 births the machine parked in the sent-msg2 phase alongside
the window leg (msg1 crypto and the msg2 build/send stay inline; the
msg2-send-failure cleanup disposes it).
- handle_msg3 steps that persistent machine instead of a transient. The
decision path is unchanged: the msg3 handler never reads machine state
and overwrites the identity-plane fields from the wire outcome before
dispatching, so every arm's decision and actions are byte-identical.
- promote_connection stops rebirthing: the executor feeds the promotion
result back into the machine (the shape the IK line already uses) and
the machine crystallizes to Established in place.
- Every path that tears down an inbound window leg now disposes its
machine through remove_peer_machine: the seven inline msg3 termination
arms, the six executor swap/rekey-responder consumption sites, both
promote-failure arms, the single-peer leaf reject, the losing side of
a cross-connection, and the msg1 send-failure cleanup. The
promote-failure disposal also fixes a pre-existing leak: an outbound
leg whose promotion fails had its connections entry consumed before
the error, so the stale reaper could never reach its dial machine.
Index-free behavior is unchanged at every site. Two test helpers that
hand-roll outbound dials now insert the dial machine production
inserts, and new tests pin the machine's birth phase, its post-promote
crystallized state, and disposal on the failure and rekey-responder
arms.
Carries the debug-build peer-map coherence check. The leg-to-machine
direction is gated OFF on this line (const flipped in the merge): the
inbound msg1-to-msg3 window legs and anonymous-discovery outbound legs
legitimately run machine-less here, so only the machine-to-carrier
leak-tripwire direction asserts until every leg is born with a
persistent machine.
Assert, once per tick in debug builds, that the peer control-machine map
and its carriers stay coherent: every control machine has a live
handshake leg, an active peer, or a pending connect (a machine with none
is a leak the stale reaper can never see), and every handshake leg has a
machine. The second direction sits behind a file-local const so a branch
where handshake-window legs legitimately run machine-less can gate it
off without weakening the leak tripwire.
Teach the add_connection test seam to seed a control machine for the leg
it inserts (derived from the connection's direction and identity), and
remove_connection to dispose it, so the seam-built topologies satisfy
the check. Three unit tests: seam coherence, coherence through a real
promotion, and the orphaned-machine panic.
Carries the dead-code deletion (PeerSlot enum, PeerConnection resend
API) and the module-doc liveness corrections. Hand-resolved the doc
conflicts with next-appropriate wording: the executor module doc names
the live msg3 decision-machine path (PromoteToActive /
SwapToInboundSession / RekeyRespondTrigger) while keeping the still-true
msg1-inline dormancy note; the peer_machines field doc reflects next's
promote-time established() births; the machine module doc drops the
stale unwired claims, including the provisional-and-unwired note on the
msg3 trigger variants which are live.
Several module and field docs still described the per-peer machine as
unwired shadow scaffolding. It has been live for some time: machines are
inserted at dial and inbound msg1, stepped by the handshake handlers and
the rekey-cadence and liveness-reap routers, and the executor's
SwapSendState/CompleteDrain/InvalidateSendState arms are the authoritative
paths (the inline bodies survive only as debug-assert release fallbacks).
Rewrite those docs to the current truth while keeping the still-true
dormancy facts: PeerEvent::Timeout and PeerEvent::Tick are never
dispatched in production, retransmit fires on the machine-armed deadline
while the timeout reaper keys on timer presence with the config
threshold, and the remaining inert executor stubs are SendRekey,
SendLinkMessage, and the connected-UDP arms. Drop the stale
allow(dead_code) on the peer_machines field.
PeerSlot (and its entire impl surface) was referenced only by its own
module tests and the lib.rs re-export; peer storage has always used the
separate connections/peers maps. PeerConnection's resend_count/
next_resend_at_ms/record_resend delegations had no production callers:
the live resend counter is machine-sourced (connection_resend_count reads
the per-peer machine), and the FSP session layer uses SessionEntry's own
methods. ConnectionState::next_resend_at_ms is now test-only (its
remaining callers are the fmp state unit tests) and marked cfg(test).
The PeerSlot unit tests go with the enum; test_resend_count_tracking is
dropped because the delegation target's schedule arithmetic is already
covered by the fmp resend_bookkeeping test.
Fold in a next-only wording fix for the OpenWrt 802.11s mesh backhaul:
next's FMP link handshake is Noise XX, not the Noise IK on master, so the
fips-mesh-setup header and the how-to now name it pattern-agnostically
("the Noise handshake"), matching the shipped fips.yaml comment and
staying accurate on this branch.
Router-to-router radio backhaul over an open 802.11s mesh interface,
with FIPS providing all encryption (Noise IK), authentication, and
routing on top of bare L2 neighbor links. The mesh runs OPEN with
mesh_fwding 0 — SAE would duplicate the Noise layer and force ath10k
raw mode, and FIPS is the routing layer — so the Noise handshake is the
real auth/encryption boundary and FIPS's spanning tree does the routing.
fips-mesh-setup: an opt-in UCI helper that creates a per-radio
mesh-point interface (radio0 -> fips-mesh0, radio1 -> fips-mesh1;
trailing-digit derivation with a free-index fallback and a collision
guard). Radio setup stays opt-in — a package must not commandeer radios
on install. 'remove' takes an optional radio and otherwise removes all
instances. Dual-band routers get one instance per radio; FIPS treats the
two backhaul paths as failover, not multipath: it keeps one active link
per peer (cross-connection resolution picks a single winner), and the
second band stands by, re-establishing the peer after keepalive timeout —
traffic never uses both bands at once.
fips.yaml ships the mesh0/mesh1 Ethernet-transport entries commented
out, so a stock install that never creates fips-mesh* logs no per-boot
"interface missing" bind warning. fips-mesh-setup uncomments the matching
meshN block when it creates the interface and re-comments it on remove,
so the flash-and-drop-in flow needs no manual config edit. The file is
rewritten 0600-first (it may hold an inline nsec) via an atomic replace.
Two field-found silent non-peering causes are surfaced by the helper and
the guide:
- Same channel: mesh points only peer on a shared channel, and 'auto'
lets each radio pick its own. The helper prints the radio's
band/channel and warns loudly on 'auto' with the exact uci command to
pin one; the how-to gains an ordered no-peers triage (channel mismatch,
on-air scan check, DFS CAC wait, regdomain).
- STA channel capture: a client (sta) interface drags the whole radio to
its upstream AP's channel, so a mesh pinned elsewhere never joins and
does not recover until the STA disconnects. The helper warns when the
target radio carries a STA; the guide documents the incompatibility of a
roaming uplink with a fixed-channel mesh on the same radio.
Both the create and remove paths run 'wifi reload', which briefly drops
every client AP on all radios; the how-to sets that expectation.
Regression test: the shipped OpenWrt fips.yaml must parse via the real
Config deserializer in both states — as shipped (mesh inactive) and after
the uncomment the helper performs.
Packaging: the helper is installed across the ipk/apk/buildroot paths
(three synced copies), with the CI structural checks and shellcheck
targets extended to cover it. Full guide in
docs/how-to/set-up-80211s-mesh-backhaul.md.
Phase 4 of the rekey suite waited for only one more initiator cutover
(guaranteeing three) while Phase 6 asserts at least four. The fourth
cutover then had to land in the brief window between the wait returning
and the Phase 6 log snapshot, so host load could push it past the window
and fail the run even though every cutover completed correctly. Wait for
two more cutovers, the full second rekey cycle, matching the Phase 6
threshold, so the asserted count is guaranteed before it is checked.
Re-express the rekey-msg2 and cross-connection observation feeds onto
the XX cores. The rekey-msg2 observation lands inside the block that
installs the pending session (where XX also generates msg3), so it fires
only when the install actually ran. The cross-connection observation
sits at the outbound resolution arms and targets the promoted peer's
machine; the inbound session-swap effects already own their executor
path here and are untouched. Crypto effect bodies are byte-unchanged.
Feed the per-peer machine two observation events so its control/rekey
shadow state stays coherent with the inline crypto-session installs,
without moving those installs. The crypto effect bodies are unchanged.
On rekey-msg2 completion, feed the machine the responder index on the
success path only (after the pending session is installed); the abandon
path feeds nothing.
On cross-connection resolution, feed the machine the swap outcome: on a
swap it records the new outbound and responder indices to mirror the
session replacement, and on a keep it does nothing. The observation
targets the promoted peer's machine, not the outbound leg whose machine
is removed as the block is entered.
Both observation handlers emit no action; nothing consumes the updated
shadow state yet.
Move the two Noise-XX inbound establish effects — the cross-connection
session swap and the rekey-respond session install — out of the inline
handle_msg3 arms and into their per-peer machine executor actions
(SwapToInboundSession, RekeyRespondTrigger). The inbound establish
decision now falls through to the shared machine-drive arm, matching the
promote/restart arms.
Carry the session index on the InboundMsg3 event and seed it into the
transient machine before dispatch. The swap actions build their index
from the machine's connection state, which is unset on a fresh inbound
transient; without the seed the actions would emit empty and the swap
would silently no-op while leaking the allocated index.
Give the inbound reject and msg2-resend machine arms their terminal
Failed state and index free, matching the inline arms that own those
paths, so a later timer cannot free the index or report loss for a peer
whose handshake has already resolved.
Preserve exactly: the three distinct index frees and their paired index
and pending-outbound map removals; the link-teardown asymmetry (the
cross-connection path drops the address mapping, the rekey-respond path
keeps it); the session take-then-install ordering; and every reject kind
on the error sub-paths.
Fold the handshake timer lifecycle (msg1 retransmit + timeout/stale
reap) through the per-peer machine, re-expressed onto the XX handshake
surface.
- Route peer-machine removal through remove_peer_machine so each link's
timer store is dropped together with its machine (choke-point).
- Home the msg1-retransmit decision on the machine-armed retransmit
timer; advance the resend counter only on send success and relocate
the operator-visible resend count onto the machine.
- Reap outbound handshake timeouts via a presence-scan over the machine
HandshakeTimeout timer, reading the threshold from config each tick so
the reap stays neutral for any handshake_timeout_secs.
Cancel both dial-armed handshake timers on outbound promote so a
promoted machine carries no stale timer entry. Preserve the guard that
suppresses a msg1 resend at a peer already promoted via the inbound
cross-connection path.
The XX inbound HandshakeTimeout presence-scan is neutral only because
the inbound establish path sends msg2 inline and never dispatches the
inbound machine event, so no inbound leg ever populates a
HandshakeTimeout timer. A future change that drives inbound establish
through the machine must re-verify the reap equivalence for inbound
legs.
Move the outbound handshake-timeout reap off the unconditional check_timeouts
scan onto the machine-armed HandshakeTimeout timer. A new drive_handshake_timeouts
(run before the retransmit drive, so a timed-out leg is reaped rather than resent
on the same tick) reaps the outbound legs that carry a HandshakeTimeout timer and
have idle-timed-out this tick.
The timer's presence selects the leg (only outbound legs arm one; IK inbound arms
none); the reap threshold is the shell is_timed_out(now, config) predicate, not
the timer's stored deadline. The machine arms the timer from a hardcoded constant
at dial, which is not authoritative for an operator-tuned handshake_timeout_secs,
so reading the threshold from config each tick keeps the reap neutral for any
timeout value and on the last_activity clock exactly as before.
check_timeouts keeps reaping everything else: failed connections (all of them,
promptly) and the idle-timeout of legs without a machine timer (inbound legs, and
any machine-less connection). Total coverage is unchanged. check_timeouts runs
before the timer drive, so a failed outbound leg is reaped there first, its timers
dropped, and the timeout drive never double-fires on it.
Split drive_peer_timers into the timeout drive and the (byte-identical) retransmit
drive. The dormant machine timeout handler is not dispatched, so the session index
is freed once, by cleanup_stale_connection. A regression test drives a timed-out
outbound leg to reap; the existing check_timeouts tests continue to anchor the
residual sweep. Test count 1631 to 1632.
Move the outbound msg1 resend off the unconditional tick function onto the
machine-armed retransmit timer. The per-peer machine already arms a
HandshakeRetransmit deadline at dial; a new drive_peer_timers fires the due ones
(kind-filtered to the retransmit timer) and homes the resend counter on the
machine, where the operator-visible count now reads from.
The resend decision reads the same operator config as before (interval, backoff,
max), the wire bytes and transport target still come from the shell connection,
and the pure core computes the backoff schedule. As with the deleted
resend_pending_handshakes, the count and reschedule advance only on a successful
send: a failed send neither advances the count nor marks the connection failed,
it just retries on the next tick. The handshake-timeout timer stays on the legacy
check_timeouts path, and the rekey/liveness timers keep their own shell drivers,
so drive_peer_timers deliberately fires only the retransmit kind.
The show_connections resend count is relocated to read from the machine (the
counter's new home) via connection_resend_count; machine-less and inbound
connections report 0, matching what the shell connection reported before. Delete
resend_pending_handshakes and resend_candidates (the latter also from the
LifecycleView trait, its only user). The resend unit test is re-expressed against
the machine + timer path, covering the due check and the record-on-success
semantics.
Known limitation: the first resend interval is armed from the machine's hardcoded
1000ms constant, which equals the config default. Under an operator override of
handshake_resend_interval_ms the first resend diverges from the pre-change
dial+interval; subsequent resends and the cap remain config-driven. Neutralizing
the first-resend override needs the interval threaded into the sync core (the
shell arm would be clobbered by the machine's own timer arming at dial), deferred
to when the connection and machine entities merge. Test count unchanged at 1631.
The control machine already emits SetTimer/CancelTimer actions when it arms the
handshake retransmit and timeout deadlines, but their executor arms were a
single no-op stub and the machine's Timeout event was never dispatched -- the
real work still runs on the legacy tick (check_timeouts,
resend_pending_handshakes).
Add the storage the time-as-input driver will read: a peer_timers map keyed by
LinkId then TimerKind, holding each armed timer's absolute deadline. The SetTimer
arm now inserts (overwrite = reschedule) and CancelTimer removes; the outbound
msg2 promote cancels the two dial-armed handshake timers, since the machine
survives promotion and the entries would otherwise linger in the store.
This store is a shadow: it is written and cleared but no driver reads it yet, so
behavior is unchanged. The legacy tick stays authoritative until the driver that
feeds Timeout and deletes the overlapping tick paths lands.
Route every machine removal through a new remove_peer_machine(link) choke-point
that drops the timer store alongside the machine, replacing the twelve direct
peer_machines.remove sites so no armed timer outlives its machine. TimerKind
gains Hash (to key the store) and Ord (for deterministic driver collection); it
is internal and never serialized. Test count unchanged at 1631.
Bring the outbound-handshake-through-the-machine series onto the next-branch
Noise-XX cores. Re-expressed rather than transcribed: next has no outbound
decision core, so the promote drives PeerEvent::OutboundMsg2 (not the IK Msg2
snapshot event) and cross-connection resolution stays inline. Hybrid provenance
-- identified outbound legs persist the control machine at dial and drive
through it; anonymous-discovery legs (identity unknown until XX msg2) retain the
inline transient-at-msg2 path. ReportLost{kind} routing, the connection-oriented
dial via the machine (OpenTransport + TransportConnected), and the prepare/send
msg1 split all carried over.
Behavior-neutral on next: the XX msg2 body (Noise completion, FMP, ACL, msg3) is
untouched; anonymous legs are unchanged; the dial-persisted machine promotes
with our_index unset.
Route the connection-oriented (TCP/Tor) outbound path through the peer state
machine, matching how the connectionless path already works.
initiate_connection's oriented branch now drives PeerEvent::Dial with
connection_oriented=true; the machine parks in Connecting and emits
OpenTransport, whose executor arm performs the non-blocking transport.connect
and pushes the PendingConnect. When the connect resolves, poll_pending_connects
prepares msg1 in the shell and then drives PeerEvent::TransportConnected, which
sends msg1 via the machine's SendHandshake arm.
The msg1 prepare (index allocation, Noise leaf, wire arming) MUST run in the
shell before the TransportConnected drive: send_stored_msg1 only transmits an
already-armed wire, so a drive-only path would silently send nothing. The
machine's our_index stays unset; the connect-failure path keeps its direct
handshake-timeout handling (TransportFailed stays dormant). The now-unused
Node::start_handshake helper is removed.
Behavior-neutral: same transport.connect, same PendingConnect, same msg1 send
and failure teardown as the removed inline path -- only the driver changes from
inline shell code to the state machine.
Move the peer_machines insert for an outbound leg out of the tail of
prepare_outbound_msg1 to a single shared site in initiate_connection, before
the connection-oriented / connectionless fork. This lets the connection-oriented
path find the machine at dial time (so it can be driven through the connect
handshake) without prepare_outbound_msg1 -- which for that path runs after the
connect completes -- clobbering an in-progress machine back to Discovered.
Because the machine now exists before the fallible dial steps, add
peer_machines.remove to every failure path in the widened dial window: the
index-allocation and Noise-leaf failures in prepare_outbound_msg1, the oriented
transport.connect failure, and both poll_pending_connects teardown arms
(handshake-start failure and async connect failure). remove_link does not touch
peer_machines, so these explicit removes are required.
Behavior-neutral: the connectionless path still drives the machine to
Handshaking and sends msg1 identically; the machine's our_index stays unset
(no spurious UnregisterDecryptSession on a later inbound restart); a failed dial
leaves peer_machines empty for that link exactly as before; and no
connection-oriented machine drive is wired here.
The connection-oriented (TCP/Tor) outbound connect->handshake path had no
`cargo test --lib` coverage; it was exercised only by the opt-in Tor
integration suites, and the TCP node tests bypass it via a manual
connectionless handshake helper. Add three unit tests:
- a machine-level test driving Dial{connection_oriented:true} -> Connecting
(emitting only OpenTransport, no msg1) -> TransportConnected ->
Handshaking{SentMsg1}, asserting the exact OpenTransport and
SendHandshake+SetTimer action vectors that start_outbound_handshake emits
(its oriented reach via on_transport_connected was previously untested; the
connectionless reach via on_dial was already covered);
- two node-level tests over a real loopback TcpTransport: a successful connect
that reaches start_handshake (observed via a pending_outbound entry), and a
connect to a closed port that routes through the failure arm (link torn down,
no msg1 dispatched).
Tests only; no production change.
Split the outbound handshake setup out of start_handshake into
prepare_outbound_msg1 (allocate the index, run the Noise leaf, frame and arm
msg1 -- the fallible steps, returning an error the caller propagates) and
send_stored_msg1 (transmit the armed wire). A connectionless dial now runs
prepare in the shell, then drives the control machine, whose SendHandshake
action sends the wire via the executor. Connection-oriented dials keep calling
start_handshake, now prepare followed by the send inline.
The dial event gains a connection_oriented flag so the machine's on_dial sends
msg1 immediately for connectionless transports (no connect step) instead of
opening a transport first. Behavior is unchanged: the same index, Noise leaf,
wire bytes, maps, and send-error handling as before, with index-allocation and
Noise failures still propagated synchronously before the send. A regression
test covers that a promote from the post-dial handshaking state is identical to
the former discovered-state promote.
Create and persist the per-peer control machine when an outbound handshake is
dialed, keyed by its link, instead of building a transient at msg2. The msg2
completion path now looks up that persisted machine to drive the promote,
falling back to a transient only if none is present (e.g. a direct-seeded test).
The machine parks in the Discovered state until promotion and is inert to the
liveness reap and rekey cadence while unpromoted, since it is absent from the
peers map. It is removed on every path that ends the outbound leg without
promoting -- the stale-connection reaper, the msg2 authorization-failure arm,
and the cross-connection resolution block -- mirroring the connection's own
lifetime so no dangling machine survives.
Its session index is deliberately left unset on the machine (the shell owns the
index on its connection), so a later inbound restart does not emit a spurious
decrypt-session unregister. A regression test covers that invariant.
Add a LostKind discriminator to the ReportLost action so the executor can
route an un-promoted handshake failure to the connected-guarded reconnect
reflex (note_handshake_timeout) and an established peer's link-death to the
unconditional one (note_link_dead), instead of collapsing every loss to
note_link_dead.
The two loss producers dispatched today, the liveness reap and the
inbound-restart-then-promote arm, both keep the link-dead routing, so
behavior is unchanged. The handshake-timeout and dial-failure producers are
tagged accordingly but stay dormant until their events are dispatched.
On two inbound msg3 outcomes the msg1-allocated inbound session index
was dropped without returning it to the allocator: losing the dual-rekey
tie-break (we keep our in-progress rekey and drop their msg3), and a
duplicate handshake that resolves to a msg2 resend. Under repeated hits
this slowly leaks index space. Free the index on both arms, matching the
sibling reject arms.
Add a test-only helper to backdate a peer's session-established instant,
and two regression tests that drive a real second handshake into each
arm and assert the index is returned to the allocator (both fail if the
free is removed).
Remove the now-stale `#[allow(dead_code)]` on `advance_peer_machine`
and `execute_peer_actions`; both are live (called from the link-dead
reap, rekey cadence routing, and the handshake establish sites).
In `route_rekey_cadence`, reuse the ambient context timestamp for the
machine step instead of taking a second clock sample; the extra
sample's only consumer was the currently-inert cutover drain timer, so
the change is behavior-neutral.
Forward-merge the action-contract round-trip test. This line's action type
carries two extra establish-trigger variants (SwapToInboundSession,
RekeyRespondTrigger), so the merge resolution extends the test's sample set
and its wildcard-free exhaustiveness match to cover all of them — the test
proves every variant, including the two XX-only triggers, round-trips
unchanged through the async channel.
Prove the per-peer machine's action type is a runtime-agnostic message
contract: it is Send + Sync + 'static, and every variant round-trips
unchanged through a single-threaded async channel (a current-thread runtime,
sender and receiver on one thread). A wildcard-free match over the variants
makes any future action a compile error here until it is added to the sample,
so a variant that embedded a runtime handle could not slip through unproven.
Forward-merge the promote-failure warning target pin. The peer-action
executor diverges between the two lines (IK vs XX establish arms), so the
pin was applied to this line's own two promote-Err warns during the merge
resolution: outbound "Failed to promote connection" and inbound "Failed to
promote inbound connection" now emit under fips::node::handlers::handshake,
matching the sibling max-peers reject log already pinned to that target.
Johnathan Corgan
ArjenandJohnathan Corgan