Add versioning job with release channel detection, Blossom upload,
NIP-94 event publishing, and relay verification. Replace setup-zig
action with direct download for act runner compatibility. Pin
cargo-zigbuild and zig versions for reproducible builds.
Pin Rust toolchain to 1.94.0 via rust-toolchain.toml for deterministic
compiler output across environments. Set SOURCE_DATE_EPOCH from git
commit timestamp in CI workflows and packaging scripts to normalize
embedded timestamps.
Make packaging archives reproducible: pass --mtime=@$SOURCE_DATE_EPOCH
to tar in .deb, .ipk, and systemd tarball builds. Normalize ownership
to root:root in systemd tarballs. Pin cargo-zigbuild to 0.19.8 for
cross-compilation stability.
Add SHA-256 hash output to CI build and OpenWrt packaging workflows
for binary verification.
Three infrastructure bugs fixed:
- DNS resolution never populated the identity cache because Docker
overwrites /etc/resolv.conf at container start. Fix: bind-mount
resolv.conf in the chaos compose template, matching the static and
sidecar test configs.
- Traffic generator used config-time npubs for iperf3 targets, but
ephemeral nodes generate fresh keypairs at startup. Fix: share the
peer churn manager's runtime npub cache with the traffic manager.
- Log analysis had no discovery counters and used wrong patterns.
Fix: add discovery section with correct log message matching.
Also adds timestamped output directories (YYYYMMDD-HHMMSS-scenario),
coord_ttl_secs override in maelstrom.yaml, FIPS_SIM_OUTPUT env var
support, and maelstrom-sparse scenario for sparse topology testing.
Add runtime peer management to the FIPS daemon via control socket
commands, and a new chaos simulation scenario that exercises dynamic
topology mutation with ephemeral node identities.
Daemon (connect/disconnect commands):
- Extend control socket Request with optional params field
- Add commands.rs module for mutating command dispatch, separate from
read-only queries
- Add api_connect() on Node: builds ephemeral PeerConfig (no auto-
reconnect), pre-seeds identity cache, reuses initiate_peer_connection
- Add api_disconnect() on Node: calls remove_active_peer(), clears
retry_pending to suppress reconnection
- Route non-show_* commands to async command dispatch in rx_loop
fipsctl CLI:
- Add Connect and Disconnect subcommands accepting npub or hostname
- Resolve hostnames from /etc/fips/hosts before sending to daemon
- Refactor socket I/O into reusable send_request helper
Chaos simulator (maelstrom scenario):
- Add PeerChurnManager: periodically disconnects a random active link
and connects a random unconnected node pair via control socket
- Add send_command() to control.py using base64-encoded JSON payloads
to avoid shell quoting issues in docker exec
- Add PeerChurnConfig to scenario with interval and ephemeral_fraction
- Ephemeral identity support: nodes configured without nsec generate
fresh keypairs on restart; simulator queries show_status for new
npub and updates its cache via on_node_restart callback
- Add maelstrom.yaml: all chaos dimensions (netem, link flaps, node
churn, peer topology churn, traffic) with 50% ephemeral identity
The K8s sidecar is a standalone example, not a test harness — it has
no CI integration unlike testing/sidecar/. Move it to examples/
alongside sidecar-nostr-relay/ where it belongs. Update internal path
references in Dockerfile, build.sh, and README.
Add a complete example running a strfry Nostr relay exclusively over
the FIPS mesh using the sidecar pattern. Includes Docker Compose
stack, network isolation via iptables, .fips DNS resolution, nak CLI,
build script with cross-compilation support, and documentation.
Also fix the package-openwrt.yml workflow path to match the
openwrt → openwrt-ipk directory rename.
Adds a complete Kubernetes sidecar setup under testing/k8s/ that runs
FIPS as a sidecar container, injecting the mesh TUN interface (fips0)
into any co-located app container via shared pod network namespace.
- Multi-stage Dockerfile builds fips and fipsctl from source (debian
trixie / rust slim-trixie), producing a minimal runtime image with
iproute2, iptables, dnsmasq, and the two binaries
- entrypoint.sh generates fips.yaml from environment variables, rewrites
/etc/resolv.conf to route .fips DNS through dnsmasq, applies optional
iptables isolation, clamps TCP MSS, then starts dnsmasq and execs the
daemon
- pod.yaml annotated example Pod manifest with Secret, sysctl tuning,
readiness/liveness probes, and resource limits
- scripts/build.sh convenience wrapper for docker build
- testing/k8s/.dockerignore keeps the build context small
- README.md usage guide covering quick start, isolation modes, env vars,
multi-peer JSON config, troubleshooting
The PTB source was set to the local FIPS address, which Linux ignores
(loopback PTB security check). Change the source to the original
packet's destination (the remote peer) so the kernel sees it as coming
from a remote router and honors the PMTU update.
Add test coverage for the PTB source address invariant in both the
icmp unit tests and the node integration tests.
The loss and goodput delta guards used prev_rr_highest_counter > 0 and
prev_rr_cum_bytes > 0, which conflates "never received a report" with
"received a report where the value was 0." Since Noise transport
counters start at 0, this is semantically wrong. Use a dedicated
has_prev_rr boolean flag instead. Fixes GitHub issue #14 (Bug B).
The reverse delivery ratio was computed as cumulative_packets_recv /
highest_counter (lifetime values), while the forward ratio correctly
used per-interval deltas. This made ETX increasingly unresponsive over
session lifetime — early loss haunted the ratio forever, late loss
barely moved it.
Replace set_delivery_ratio_reverse() with update_reverse_delivery()
that tracks previous snapshot state and computes deltas, matching the
forward ratio's approach. Fixes GitHub issue #14 (Bug A).
After rekey cutover, frames encrypted with the old session can still
arrive during the 10s drain window. These carry large sender timestamps
from the old session, producing enormous transit deltas that spike the
EWMA jitter estimator (observed 2,000-7,000ms spikes on UDP links).
Add a time-based grace period (DRAIN_WINDOW_SECS + 5s = 15s) after
rekey that suppresses jitter updates until drain-window frames have
flushed. Baselines still update every frame so calculation resumes
cleanly after grace expires.
Fixes#10
The DNS responder returned NXDOMAIN for non-AAAA queries (e.g. A record)
on valid .fips names. This caused resolvers like nslookup and tinyproxy
to give up without attempting AAAA, since NXDOMAIN means "name does not
exist." Return NOERROR with an empty answer section instead, which tells
the client the name exists but has no records of that type.
Fixesjmcorgan/fips#9.
Cherry-picked from v0l PR #6 (issue #5):
1. remove_active_peer() now removes the end-to-end session from
self.sessions when evicting a peer. The stale Established entry
caused initiate_session() to silently return Ok(()) via the
is_established() guard, preventing session re-establishment after
link-layer reconnection.
2. initiate_peer_connections() pre-seeds the identity cache from
configured peer npubs at startup, so TUN packets can be dispatched
immediately without waiting for handshake completion.
3. schedule_reconnect() preserves accumulated backoff when a retry
entry already exists, preventing exponential backoff reset on
repeated link-dead cycles.
Includes regression tests for all three fixes.
Rekey dual-initiation race (FMP + FSP):
When both sides' rekey timers fire simultaneously on high-latency links
(Tor ~700ms RTT), both msg1s cross in flight before dampening can
suppress the second initiation. Each node acts as both initiator and
responder, with set_pending_session() from the responder path destroying
the initiator's in-progress state. Each side ends up with a
pending_new_session from a different Noise handshake, causing AEAD
verification failure after cutover and link death. Fix: deterministic
tie-breaker in both FMP msg1 handler and FSP SessionSetup handler
(smaller NodeAddr wins as initiator). Also guard against pending session
overwrite from retransmitted msg1s.
Parent selection SRTT gate:
Peers without MMP RTT data are excluded from parent candidacy via
has_srtt() filter, preventing freshly reconnected peers from appearing
artificially attractive. First-RTT triggers immediate parent re-eval.
The gate in evaluate_parent() skips unmeasured candidates when any peer
has cost data, but falls back to default cost 1.0 during cold start
when no peer has MMP data yet.
Auto-reconnect on all peer removal paths:
The excessive-decryption-failure and peer-restart epoch-mismatch removal
paths were missing schedule_reconnect() calls, causing auto-connect peers
to be permanently abandoned after those events.
Control socket accessibility:
Socket and parent directory chowned to root:fips with mode 0770/0750 so
group members can use fipsctl/fipstop without root.
Log level changes:
Default RUST_LOG changed to debug in systemd service files. "Unknown
session index" log reduced from debug to trace.
Previously, static peers configured with AutoConnect gave up after 6
attempts (1 initial + 5 retries). If the remote peer was offline at
startup, the node permanently abandoned the connection. The reconnect
path (after MMP link-dead) already retried indefinitely but only
activated after a peer had been previously connected.
Remove the reconnect parameter from schedule_retry() and always set
reconnect=true when creating retry entries, since only auto-connect
peers reach this code path. The 300s backoff cap prevents resource waste.
The max_retries=0 config still works as an explicit kill switch.
The FSP XK rekey handshake has a race condition where the initiator
can cut over (K-bit flip) and send data encrypted with the new session
before msg3 reaches the responder. The responder has no pending session
yet, so K-bit detection fails and packets are dropped.
Defer FSP initiator cutover by 2 seconds after handshake completion
(FSP_CUTOVER_DELAY_MS) to give msg3 time to traverse the mesh. FMP
(IK, 2 messages) is unaffected since the responder completes during
msg1 processing.
Also fix MMP metric corruption after rekey cutover: the new session
starts with counter 0 but MMP state carries highest_counter and
GapTracker.expected_next from the old session, producing false
reorder counts, jitter spikes, and invalid OWD trends. Add
reset_for_rekey() methods that clear counter-dependent state while
preserving RTT estimates.
Additional fixes:
- Remove stale peers_by_index entry on abandon_rekey error path
- Replace redundant peers_by_index inserts with debug assertions
verifying the pre-registration invariant
- Tighten rekey integration test to zero tolerance (was 4 failures)
Add TorTransport in src/transport/tor/ supporting three operating modes:
Outbound (socks5 mode):
- Non-blocking SOCKS5 connect via tokio-socks with per-destination
circuit isolation (IsolateSOCKSAuth)
- TorAddr enum for .onion and clearnet address types
- Connection pool with per-connection receive tasks, reuses TCP
stream FMP framing
- connect_async()/connection_state_sync()/promote_connection() follow
the same non-blocking polling pattern as TCP transport
Inbound (directory mode — recommended for production):
- Tor manages the onion service via HiddenServiceDir in torrc
- FIPS reads .onion address from hostname file at startup
- No control port needed — enables Tor Sandbox 1 (seccomp-bpf)
- Accept loop mirrors TCP pattern with DirectoryServiceConfig
Monitoring (control_port mode and optional in directory mode):
- Async control port client supporting TCP and Unix socket connections
via Box<dyn AsyncRead/Write> trait objects
- AUTHENTICATE with cookie or password auth
- 8 GETINFO queries: bootstrap, circuits, traffic, liveness, version,
dormant state, SOCKS listeners
- Background monitoring task polls every 10s, caches TorMonitoringInfo
in Arc<RwLock> for synchronous query access
- Bootstrap milestone logging (25/50/75/100%), stall warning (>60s),
network liveness transitions, dormant mode entry
- Directory mode optionally connects to control port when control_addr
is configured (non-fatal on failure)
Operator visibility:
- show_transports query exposes tor_mode, onion_address, tor_monitoring
(bootstrap, circuit_established, traffic, liveness, version, dormant)
- fipstop transport detail view: Tor mode, onion address, SOCKS5/control
errors, connection stats, Tor daemon status section
- fipstop table view: tor(mode) label with truncated onion address hint
Security hardening:
- Per-destination circuit isolation via IsolateSOCKSAuth
- Unix socket default for control port (/run/tor/control)
- Reference torrc with HiddenServiceDir, VanguardsLiteEnabled,
ConnectionPadding, DoS protections (PoW + intro rate limiting)
Config:
- TorConfig with socks5, control_port, and directory modes
- DirectoryServiceConfig: hostname_file, bind_addr
- control_addr, control_auth, cookie_path, connect_timeout,
max_inbound_connections
Testing:
- 69 unit + integration tests with mock SOCKS5 and control servers
- Docker tests: socks5-outbound (clearnet via Tor) and directory-mode
(HiddenServiceDir onion service)
Documentation:
- Transport layer design doc: Tor architecture, directory mode
- Configuration doc: Tor config tables and examples
Add resolve_socket_addr() with IP fast path and tokio::net::lookup_host()
fallback for DNS hostnames. Peer addresses can now use hostnames like
"peer1.example.com:2121" alongside IP addresses.
UDP transport adds a per-transport DNS cache (60s TTL) to avoid
per-packet resolution. TCP resolves at connect time (one-shot).
Update design docs, config examples, and changelog to reflect hostname
support in transport addressing.
- Rewrite TCP "Connect-on-Send" section to document non-blocking connect
model (ConnectingPool, PendingConnect, poll_pending_connects)
- Add connect() and connection_state() to Transport trait surface
- Expand Connection Lifecycle section with ConnectionState enum
- Remove phantom TCP socks5_proxy field (removed from code, superseded
by TorConfig)
- Fix "future Tor transport" references (stream reader already shared)
- Replace misleading "tor:" named TCP instance example
- Update fips-intro.md implementation status (TCP and Ethernet are
implemented, not "under active design")
TCP (and future Tor) transports previously established connections
synchronously inside send(), blocking the node's RX event loop during
TCP handshake. This is particularly problematic for Tor where SOCKS5
circuit establishment can take 30-120 seconds.
Add a non-blocking connect path:
- ConnectionState enum in transport layer (None/Connecting/Connected/Failed)
- connect_async() on TcpTransport spawns background TCP connect task
- connection_state_sync() polls task completion, promotes to pool
- TransportHandle gains connect() and connection_state() dispatch methods
- Node tracks PendingConnect entries for connection-oriented transports
- initiate_connection() defers handshake for connection-oriented transports
- start_handshake() extracted as separate method for deferred invocation
- poll_pending_connects() in tick handler polls and completes handshakes
- Failed connects trigger retry via schedule_retry()
Connectionless transports (UDP, Ethernet) are unchanged — connect()
is a no-op and connection_state() always returns Connected.
The existing connect-on-send path in send_async() is preserved as
fallback for reconnection after connection drops.
811 tests pass (6 new), clippy clean.
Update all fips-network/fips references to jmcorgan/fips across
Cargo.toml, README, CONTRIBUTING, packaging, and config files.
Merge CHANGELOG Unreleased and 0.1.0-alpha sections into a single
0.1.0 release entry. Update README roadmap.
Adds packaging/openwrt/ with everything needed to produce and distribute
FIPS .ipk packages for OpenWrt routers:
- Makefile: OpenWrt feed package definition using rust/host toolchain,
maps OpenWrt ARCH to Rust musl target triples
- build-ipk.sh: local build script using cargo-zigbuild + direct tar
assembly — no OpenWrt SDK or Docker required. Handles macOS BSD tar
(ustar format, resource fork suppression) and portable ar header
generation for cross-platform .ipk creation. Accepts PKG_VERSION
env var override for CI use.
- files/: procd init script, default fips.yaml (persistent identity,
br-lan and wwan interface examples), firewall helper, dnsmasq .fips
forwarding, br_netfilter sysctl, hotplug for fips0, UCI defaults for
first-boot setup, sysupgrade keeplist
- .github/workflows/package-openwrt.yml: CI workflow (ubuntu-latest +
cargo-zigbuild) building aarch64 and x86_64 .ipk packages using
build-ipk.sh; llvm-strip for cross-compiled binaries; triggers on
every push; publishes to GitHub Releases on version tags. MIPS
targets disabled pending portable-atomic crate (32-bit MIPS lacks
native AtomicU64), with nightly/rust-src toolchain steps prepared
for re-enablement.
- .gitignore: add reference/, dist/, *.ipk
Breaking wire format change: DataPacket payloads inside the AEAD envelope
now carry a 4-byte port header [src_port:2 LE][dst_port:2 LE] before the
service payload. The receiver dispatches by destination port.
Port multiplexing:
- send_session_data() takes src_port/dst_port params, prepends port header
- New send_ipv6_packet() compresses IPv6 header and sends on port 256
- Receive path dispatches DataPackets by port: port 256 decompresses IPv6
header from session context and delivers to TUN, unknown ports dropped
- Port constants: FSP_PORT_HEADER_SIZE (4 bytes), FSP_PORT_IPV6_SHIM (256)
IPv6 header compression:
- New ipv6_shim module with compress_ipv6()/decompress_ipv6() pure functions
- Strips src/dst addresses (32 bytes) and payload length (2 bytes) from each
packet, preserving traffic class, flow label, next header, and hop limit
as 6-byte residual fields
- Addresses reconstructed from session context on receive side
- Net savings: 29 bytes per packet (overhead 106 → 77 bytes)
- FIPS_IPV6_OVERHEAD constant (77 bytes), effective_ipv6_mtu() updated
- 16 unit tests for round-trip fidelity, field preservation, error cases
Documentation:
- fips-wire-formats: DataPacket port header, port registry, IPv6 shim
format tables, updated encapsulation walkthrough and overhead budget
- fips-ipv6-adapter: FIPS_IPV6_OVERHEAD (77 bytes), updated MTU numbers,
TUN reader/writer flow with compression steps, impl status
- fips-session-layer: port-based service dispatch section, data transfer
description, impl status
- fips-intro: IPv6 adapter as port 256 service, node architecture updated
- fips-mesh-operation: packet size summary with compressed overhead
- DataPacket doc updated with port header and dispatch model
- session_wire.rs module doc: DataPacket Port Multiplexing section
Update 9 documentation files to match current implementation:
- Add missing rekey config section (node.rekey.*) and host mapping
section to fips-configuration.md
- Update Ethernet frame format from [type:1][payload] to
[type:1][length:2 LE][payload] in wire-formats and transport docs
- Fix Ethernet effective MTU from interface-1 to interface-3
- Mark rekey as Implemented in mesh-layer and session-layer status tables
- Change TCP default port examples from 443 to 8443
- Add rekey, persistent identity, host mapping, mesh size estimation to
README features and status sections
- Update chaos scenario count from 16 to 20, add rekey topology to
static test docs
The fips-dns.service unit had three issues:
1. Wants=systemd-resolved.service caused systemd to start systemd-resolved
on systems that weren't using it, breaking existing DNS by rewriting
/etc/resolv.conf to the stub resolver at 127.0.0.53.
2. The ExecStart busy-wait loop for fips0 had no timeout, hanging forever
if fips.service failed to create the TUN device.
3. Installers unconditionally enabled fips-dns.service regardless of whether
systemd-resolved was present.
Fix by replacing Wants= with ConditionPathExists=/run/systemd/resolve (skips
cleanly if resolved isn't running), adding Requires=fips.service (won't start
without the daemon), bounding the fips0 wait loop to 30 seconds, and making
the installers conditional on systemd-resolved being active.
Phase 3 (post-first-rekey connectivity) can see brief disruptions while
links are mid-cutover. Add a 5s settle time after the rekey wait and
allow up to 4 transient pair failures in Phase 3. Phase 5 remains
strict, ensuring full recovery after the second rekey cycle.
fipsctl and fipstop checked XDG_RUNTIME_DIR before /run/fips/, causing
them to look in /run/user/<uid>/fips/ while the systemd-managed daemon
listens on /run/fips/control.sock. Reorder the fallback to check the
system-wide path first. Also improve the permission-denied error in
fipsctl to suggest adding the user to the fips group.
Add full npub column, transport type/address, direction (in/out),
goodput, and LQI-ascending sort to peers table. Colorize spanning
tree parent (magenta) and children (cyan). Add tree relationship
and transport info to show_peers JSON output.
Compute network size estimate by summing bloom filter estimated entry
counts from the spanning tree parent (upward) and children (downward),
leveraging the tree's non-overlapping partition property. Uses the
standard formula n = -(m/k) * ln(1 - X/m) already in BloomFilter.
Surfaces the estimate in three places:
- show_status JSON: "estimated_mesh_size" field
- Periodic info log at MMP log interval (default 30s)
- fipstop Node dashboard State section as "mesh: ~N"
Add a HostMap that resolves human-readable hostnames to npubs,
enabling `gateway.fips` instead of the full `npub1...xyz.fips`.
Two sources populate the map: peer `alias` fields from the YAML
config and an operator-maintained hosts file at /etc/fips/hosts.
The DNS responder auto-reloads the hosts file on each request by
checking the file modification time, so operators can update
mappings without restarting the daemon.
- New src/upper/hosts.rs: HostMap, HostMapReloader, hostname
validation, hosts file parser with auto-reload on mtime change
- DNS resolver checks host map before falling back to direct npub
- Node uses host map for peer display names
- Default hosts file added to both .deb and tarball packaging
- 26 new tests (789 total)
Update the external pub node (vps-chi at 217.77.8.91) to use its
real persistent npub instead of a fabricated test key. Remove the
unnecessary nsec from the external node definition.
Five tests covering the full TCP transport stack at the node level:
two-node handshake, three-node chain convergence with bloom filter
reachability, mixed UDP+TCP transport coexistence, MMP link-dead
detection after connection loss, and reconnection after link death
via connect-on-send.
Debian packaging via cargo-deb:
- Add [package.metadata.deb] to Cargo.toml with assets, dependencies,
and conffiles declarations
- Maintainer scripts: postinst (create fips group, enable services,
restart on upgrade), prerm (stop/disable on remove, stop-only on
upgrade), postrm (purge config, keys, group)
- Systemd units (fips.service, fips-dns.service) with /usr/bin/ paths
for .deb installs
- tmpfiles.d entry for /run/fips/ runtime directory
- build-deb.sh wrapper script for building packages
README rewrite:
- Replace run-from-source Quick Start with Building section
- Add Installation options: Debian .deb (cargo-deb) and generic Linux
(systemd tarball)
- Add full Configuration reference with default fips.yaml
- Add Usage sections: DNS resolution, monitoring (fipsctl + fipstop),
service management, and testing
- Update project structure and features list
Embed git commit hash, dirty flag, and target triple in all binaries
via a zero-dependency build.rs. Wire clap short/long version output
so -V shows "0.1.0 (rev abc1234)" and --version adds the target
triple. Log version at daemon startup.
Add version field to show_status control socket API response. Show
the daemon's version in fipstop's tab bar title and Runtime section.
Add CHANGELOG.md in Keep a Changelog format with the 0.1.0-alpha
release (2026-02-24) and unreleased work since then.
Implement periodic full rekey at both protocol layers using fresh DH
key exchanges. Uses the existing K-bit flag (FLAG_KEY_EPOCH /
FSP_FLAG_K) to coordinate cutover between peers.
FMP layer (IK pattern):
- ActivePeer gains rekey state: pending/previous sessions, K-bit epoch
tracking, drain window, dampening timer
- Handshake state stored on ActivePeer with msg1 sent on existing link
- Encrypted frame handler detects K-bit flips, promotes pending
sessions, falls back to previous session during drain
- Handshake handlers distinguish rekey from new connections using
addr_to_link lookup with identity-based fallback
- Free all session indices (current, rekey, pending, previous) on
peer removal
FSP layer (XK pattern):
- SessionEntry gains parallel rekey fields with XK-specific state
for the 3-message handshake
- Route availability check before FSP rekey initiation
- Encrypted session handler adds K-bit flip detection and dual-session
decrypt fallback
- SessionSetup/Ack/Msg3 handlers extended for rekey paths
Defense-in-depth:
- Consecutive decryption failure detector (threshold=20) triggers
forced peer removal instead of waiting for link-dead timeout
- Identity-based rekey detection as fallback when addr_to_link
doesn't match (e.g., TCP ephemeral ports)
Configuration: RekeyConfig with enabled flag, after_secs (default 120),
and after_messages (default 65536) thresholds.
Logging: info for successful K-bit cutover completions, warn for
failures, debug for intermediate handshake steps, trace for routine
operations (resends, drain cleanup).
Rekey lifecycle:
1. Timer/counter fires -> initiator starts new handshake
2. Old session continues handling traffic during handshake
3. Handshake completes -> initiator cuts over, flips K-bit
4. Responder sees flipped K-bit -> promotes new session
5. Both keep old session for 10s drain window
6. After drain, old session discarded
Integration test: Docker-based multi-phase test exercising both FMP
and FSP rekey with aggressive timers (35s). Verifies connectivity
across all 20 directed pairs survives two consecutive rekey cycles.
Includes rekey topology, docker-compose profile, and CI matrix entry.
Increase ping test convergence wait from 3s to 5s for CI reliability.
Packaging directory structure:
- packaging/common/ — shared config (fips.yaml) used by all formats
- packaging/systemd/ — systemd-specific installer and service units
Systemd packaging includes:
- build-tarball.sh: builds release binaries and creates a self-contained
install tarball with stripped binaries
- fips.service: systemd unit running the daemon with security hardening
- fips-dns.service: oneshot unit configuring resolvectl to route .fips
domain queries to the FIPS DNS shim on 127.0.0.1:5354
- install.sh: deploys binaries to /usr/local/bin, installs systemd units,
creates fips group for non-root control socket access
- uninstall.sh: removes service and binaries, optional --purge for
config and identity key files
- README.install.md: installation and configuration guide
Default config enables UDP (2121), TCP inbound (8443), TUN, and DNS
resolver. Identity is ephemeral by default for privacy; operators can
uncomment persistent: true to maintain a stable npub for static peer
publishing. Ethernet transport is commented out for per-node setup.
Implement identity management for the FIPS daemon with two modes:
Ephemeral (default): A fresh keypair is generated on every start.
Key files (fips.key, fips.pub) are written for operator visibility
but overwritten on each restart. This is privacy-friendly and
requires no configuration.
Persistent (opt-in via `node.identity.persistent: true`): Uses
three-tier identity resolution:
1. Explicit nsec in config file (advanced users)
2. Persistent key file alongside config (reused across restarts)
3. Generate new keypair, persist to key file
Key files follow the SSH id_ed25519/id_ed25519.pub convention:
- fips.key: bare bech32 nsec string, mode 0600
- fips.pub: bare bech32 npub string, mode 0644
The daemon always writes fips.pub on startup so operators can
find their current identity via `cat /etc/fips/fips.pub`.
Identity resolution extracted into testable `resolve_identity()`
function in config module. Graceful degradation: key file write
failure silently falls back to ephemeral identity.
Add `fipsctl keygen` subcommand for manual key generation:
- `-d <dir>` output directory (default: /etc/fips)
- `-f` force overwrite existing files
- `-s` print nsec/npub to stdout instead of writing files
- Warns that `persistent: true` must be set in config
- Works without a running daemon
Includes unit tests for key file read/write roundtrip, file
permissions, whitespace trimming, empty file error, path derivation,
ephemeral-by-default behavior, ephemeral key cycling, persistent
key file loading, and persistent generate-and-reuse lifecycle.
The link-dead check required last_recv_time to be Some, so peers that
completed a handshake but never sent any data back (last_recv_time =
None) were silently skipped and lived forever as zombies. Fall back to
session_start when no frame has ever been received.
Implement hop-by-hop ECN congestion signaling through the FMP layer,
transport-level congestion detection via kernel drop counters, and
chaos harness integration for end-to-end validation.
FMP/session ECN plumbing:
- Thread ce_flag parsed at link layer through dispatch_link_message,
handle_session_datagram, handle_session_payload, and
handle_encrypted_session_msg to session delivery
- Replace hardcoded false in session-layer record_recv() with actual
ce_flag, activating ecn_ce_count tracking in session MMP
ECN congestion detection and CE relay:
- Add EcnConfig (node.ecn.*) with configurable loss_threshold (5%)
and etx_threshold (3.0) for transit congestion detection
- Add send_encrypted_link_message_with_ce() that ORs FLAG_CE into FMP
header flags; original method delegates with ce_flag=false
- Compute outgoing_ce = incoming_ce || local congestion on next-hop
link, enabling hop-by-hop CE relay through transit nodes
IPv6 ECN-CE marking:
- Mark ECN-CE (0b11) in IPv6 Traffic Class on received DataPackets
before TUN delivery when FMP CE flag is set
- Only marks ECN-capable packets (ECT(0)/ECT(1)); Not-ECT packets
unchanged per RFC 3168
Transport congestion abstraction and UDP kernel drop detection:
- Add TransportCongestion struct to transport layer for transport-
agnostic local congestion indicators
- Replace tokio::UdpSocket with AsyncFd<socket2::Socket> using
libc::recvmsg() with ancillary data parsing
- Enable SO_RXQ_OVFL for kernel receive buffer drop counter on every
packet, wiring up previously-stubbed UdpStats.kernel_drops
- Add TransportDropState for per-transport delta tracking with 1s
tick sampling via sample_transport_congestion()
- Extend detect_congestion() with transport kernel drop check
alongside MMP loss metrics
Congestion monitoring and control:
- Add CongestionStats (ce_forwarded, ce_received, congestion_detected,
kernel_drop_events) to NodeStats with snapshot serialization
- Wire counters into forwarding path, session handler, and transport
drop sampling with rate-limited warn logging (5s interval)
- Expose congestion data in show_routing control query and
ecn_ce_count in show_mmp peer entries
- Add congestion counters to fipstop routing tab in two-column layout
Chaos harness integration:
- Add query_routing(), query_transports(), snapshot_all_congestion()
to chaos control module
- Add congestion/kernel-drop log analysis in logs module
- Add congestion-stress scenario: 10-node tree, 1 Mbps bandwidth,
5-10% netem loss, heavy iperf3 traffic
- Add IngressConfig for tc ingress policing with per-peer policer
filters simulating upstream bandwidth bottlenecks
- Add iperf3 JSON result capture to traffic manager for throughput
measurement across scenarios
- Add ECN A/B test scenarios (ecn-ab-on/off.yaml) with ingress
policing and comparison script
- Enable TCP ECN negotiation (tcp_ecn=1 sysctl) in container
entrypoint for end-to-end CE propagation
Tests:
- 10 ECN unit/integration tests: mark_ipv6_ecn_ce variants, CE relay
chain (3-node propagation), EcnConfig serde roundtrip
- 3 transport drop congestion detection unit tests
Documentation:
- Update fips-mesh-layer.md: replace outdated CE Echo stub with full
ECN Congestion Signaling section covering detection logic, CE relay,
IPv6 marking, session tracking, and monitoring counters
- Update fips-configuration.md: add node.ecn.* parameter table and
ecn block in complete reference YAML
- Update fips-transport-layer.md: add Congestion Reporting section
with TransportCongestion struct, congestion() trait method, and
per-transport status; document AsyncFd/recvmsg/SO_RXQ_OVFL in UDP
- Update chaos README: add congestion/ECN scenario docs, ingress
traffic control, and iperf3 JSON capture sections
- Update README.md: add ECN to features list and "What works today";
update transport and tooling entries
Non-FIPS clients (e.g., TLS connections) hitting the TCP listen port
produce misleading "unknown FMP phase" errors because the stream reader
checked phase before version. A TLS ClientHello (byte 0x16) parsed as
version=1, phase=6.
Add UnknownVersion error variant and check the version nibble before
phase dispatch, so non-FIPS connections now report "unknown FMP version: 1"
instead of "unknown FMP phase: 0x06".
Origami74andJohnathan Corgan
Kieran