Add resend logic for SessionSetup/SessionAck messages routed through
the mesh. Stores the encoded payload on SessionEntry for resend in a
fresh SessionDatagram (so routing can adapt to topology changes).
Uses the same config parameters as link-layer retry.
Also fixes a latent bug: Initiating/Responding sessions previously
had no timeout — a stuck handshake would live forever. Now cleaned up
after handshake_timeout_secs (default 30s).
Responder idempotency: duplicate SessionSetup triggers resend of
stored SessionAck instead of being silently dropped. Initiator-side
duplicate SessionAck already handled safely (entry.take_state() sees
Established, puts it back and returns).
Handshake payload cleared on Established transition at both initiator
(handle_session_ack) and responder (handle_encrypted_session_msg).
MMP reports (SenderReport, ReceiverReport, PathMtuNotification) were
resetting the idle timer on both RX and TX paths, preventing sessions
from ever timing out when MMP traffic kept flowing. Changed touch() to
only be called for DataPacket send/receive and session establishment,
so sessions with no application data tear down after the idle timeout
even with active MMP measurement traffic.
Include source and destination coordinates on the first N DataPackets
of each session (default 5, configurable via
node.session.coords_warmup_packets). This warms transit node
coord_caches so multi-hop forwarding and error signal routing work
after SessionSetup cache entries expire.
On CoordsRequired receipt, reset the counter to re-enable coordinate
inclusion for the next N packets, handling mid-session cache expiry
and path changes.
Changes:
- SessionConfig: add coords_warmup_packets field (default 5)
- SessionEntry: add coords_warmup_remaining counter, initialized on
Established transition (both initiator and responder paths)
- send_session_data(): attach coords via DataPacket::with_coords()
while counter > 0, decrement per send
- handle_coords_required(): reset counter for affected session
- 4 new unit tests for counter lifecycle and config default
Identity cache: remove TTL-based expiry (60s TTL broke active sessions
after expiry since handle_tun_outbound checks identity_cache before
session table). Replace with LRU-only eviction bounded by configurable
identity_size (default 10K). Lookup now touches timestamp for LRU
freshness.
Cache merge: unify coord_cache and route_cache into single coordinate
cache. Both stored NodeAddr→TreeCoordinate; the layer distinction was
conceptual, not functional. Discovery-sourced entries now get the same
TTL+refresh treatment as session-sourced entries. Simplifies
find_next_hop() to single cache lookup.
Parent-change flush: clear coord_cache after recompute_coords() in both
parent-switch paths of handle_tree_announce(). Stale coordinates after
tree reconvergence cause dead-end routing that's more expensive than
re-discovery.
Tested: 493 unit tests passed, clippy clean, Docker mesh 20/20,
Docker chain 6/6.
Sessions in the Established state that have no activity for 90 seconds
are now automatically removed. This ensures idle sessions are torn down
before transit node coord_cache entries expire (300s TTL), so that when
traffic resumes a fresh SessionSetup re-warms transit node caches with
current coordinates.
The identity cache now stores registration timestamps and expires
entries after 60 seconds via lazy expiry on lookup. This prevents
unbounded growth while allowing natural repopulation through DNS
resolution on next use.
Timer ordering: identity (60s) < session (90s) < coord_cache (300s).
Both timeouts are configurable: node.session.idle_timeout_secs and
node.cache.identity_ttl_secs. Setting idle_timeout_secs to 0 disables
session idle purging.
Changes:
- Add idle_timeout_secs (default 90) to SessionConfig
- Add identity_ttl_secs (default 60) to CacheConfig
- Add timestamp to identity_cache entries, lazy expiry on lookup
- Add purge_idle_sessions() called from tick loop
- Remove #[cfg(test)] from SessionEntry::last_activity()
- 7 new tests covering timeout behavior and edge cases
Wire the TUN reader to the session layer for end-to-end IPv6 packet
delivery through the mesh. TUN reader forwards FIPS-destined packets
(fd::/8) to Node via tokio::sync::mpsc channel. Identity cache maps
FipsAddress prefix bytes to NodeAddr + PublicKey for reverse address
resolution, populated at peer promotion and session creation. Outbound
handler validates IPv6, looks up destination identity, routes through
established session or initiates new one with pending packet queue
(16/dest, 256 dests max). Queue flushed on session establishment.
ICMPv6 Destination Unreachable for unknown destinations. 6 new tests
including 3-node forwarded TUN data and pending queue flush. 410 tests
pass, clean build.
Implement Noise IK session handshake between arbitrary endpoints, carried
inside SessionDatagram envelopes through the mesh. Sessions use a three-state
machine (Initiating → Established for initiator, Responding → Established
for responder on first DataPacket). Includes session initiation API,
encrypted data transfer, simultaneous initiation tie-break, error signal
handlers (CoordsRequired, PathBroken), and local delivery wiring in the
forwarding handler.
New files: node/session.rs (state types), handlers/session.rs (~500 lines,
all session message handlers + send path), tests/session.rs (11 tests).
100-node integration test establishes sessions across random topology,
sends bidirectional encrypted datagrams through injected TUN channels,
and verifies 200/200 deliveries with 100% session establishment. Reports
routing statistics including avg 4.1 link hops per datagram.
404 tests pass (up from 393).
Johnathan Corgan