diff --git a/enclosures/lookScrews!_pill/README.md b/enclosures/lookScrews!_pill/README.md
deleted file mode 100644
index 33f4ca41..00000000
--- a/enclosures/lookScrews!_pill/README.md
+++ /dev/null
@@ -1,10 +0,0 @@
-Motivation for this design: Faceplate screws could look cool. - Judge yourself 
-Its a work build on top of giants (@gobrrrme and @blackcoffee).
-The main chassis has the propperties of a battletested enclosure called SimplePill by @blackcoffee and connected buttons are slightly reworked design  done by @gobrrrme. 
-What distinguishes this design are the visible screws on top of the enclosure and a presspad. 
-This design has a few requirements.
-    4x 10mm M2.5 risers
-    8x 10mm M2.5 screws
-The buttons and pressPad HAVE to be printed out of TPU fillament. The Top and Bottom are best from PLA but PETG will work just as well. 
-The pressPad has a slightly smaller cavity for a stubby nub of the waveshare hat. DO NOT PANIC!. Its done on purpouse to achieve a friction for the pad to hold on the nub. 
-![image](https://github.com/surfac3/seedsigner/assets/89400663/082c3c22-6bbd-402c-806e-98a32700621b)
diff --git a/enclosures/lookScrews!_pill/Bottom.stl b/enclosures/look_screws_pill/Bottom.stl
similarity index 100%
rename from enclosures/lookScrews!_pill/Bottom.stl
rename to enclosures/look_screws_pill/Bottom.stl
diff --git a/enclosures/lookScrews!_pill/ButtonsConnected.stl b/enclosures/look_screws_pill/ButtonsConnected.stl
similarity index 100%
rename from enclosures/lookScrews!_pill/ButtonsConnected.stl
rename to enclosures/look_screws_pill/ButtonsConnected.stl
diff --git a/enclosures/look_screws_pill/README.md b/enclosures/look_screws_pill/README.md
new file mode 100644
index 00000000..9d86e8a9
--- /dev/null
+++ b/enclosures/look_screws_pill/README.md
@@ -0,0 +1,16 @@
+Motivation for this design: Faceplate screws could look cool. Judge for yourself!
+
+It's work that's built on top of giants (@gobrrrme and @blackcoffee).
+
+The main chassis has the properties of a battle-tested enclosure called SimplePill by @blackcoffee and connected buttons are a slightly reworked design done by @gobrrrme.
+
+What distinguishes this design are the visible screws on top of the enclosure and a presspad. 
+
+This design requires:
+* 4x 10mm M2.5 risers
+* 8x 10mm M2.5 screws
+
+The buttons and presspad HAVE to be printed out of TPU filament. The Top and Bottom are best from PLA but PETG will work just as well. 
+The presspad has a slightly smaller cavity for the stubby nub of the waveshare hat. DO NOT PANIC! It's done on purpose to create friction for the pad to hold on the nub.
+
+![image](https://github.com/surfac3/seedsigner/assets/89400663/082c3c22-6bbd-402c-806e-98a32700621b)
diff --git a/enclosures/lookScrews!_pill/Top.stl b/enclosures/look_screws_pill/Top.stl
similarity index 100%
rename from enclosures/lookScrews!_pill/Top.stl
rename to enclosures/look_screws_pill/Top.stl
diff --git a/enclosures/lookScrews!_pill/pressPad.stl b/enclosures/look_screws_pill/pressPad.stl
similarity index 100%
rename from enclosures/lookScrews!_pill/pressPad.stl
rename to enclosures/look_screws_pill/pressPad.stl