diff --git a/enclosures/look_screws_pill/README.md b/enclosures/look_screws_pill/README.md
index 9d86e8a9..33f4ca41 100644
--- a/enclosures/look_screws_pill/README.md
+++ b/enclosures/look_screws_pill/README.md
@@ -1,16 +1,10 @@
-Motivation for this design: Faceplate screws could look cool. Judge for yourself!
-
-It's work that's built on top of giants (@gobrrrme and @blackcoffee).
-
-The main chassis has the properties of a battle-tested enclosure called SimplePill by @blackcoffee and connected buttons are a slightly reworked design done by @gobrrrme.
-
+Motivation for this design: Faceplate screws could look cool. - Judge yourself 
+Its a work build on top of giants (@gobrrrme and @blackcoffee).
+The main chassis has the propperties of a battletested enclosure called SimplePill by @blackcoffee and connected buttons are slightly reworked design  done by @gobrrrme. 
 What distinguishes this design are the visible screws on top of the enclosure and a presspad. 
-
-This design requires:
-* 4x 10mm M2.5 risers
-* 8x 10mm M2.5 screws
-
-The buttons and presspad HAVE to be printed out of TPU filament. The Top and Bottom are best from PLA but PETG will work just as well. 
-The presspad has a slightly smaller cavity for the stubby nub of the waveshare hat. DO NOT PANIC! It's done on purpose to create friction for the pad to hold on the nub.
-
+This design has a few requirements.
+    4x 10mm M2.5 risers
+    8x 10mm M2.5 screws
+The buttons and pressPad HAVE to be printed out of TPU fillament. The Top and Bottom are best from PLA but PETG will work just as well. 
+The pressPad has a slightly smaller cavity for a stubby nub of the waveshare hat. DO NOT PANIC!. Its done on purpouse to achieve a friction for the pad to hold on the nub. 
 ![image](https://github.com/surfac3/seedsigner/assets/89400663/082c3c22-6bbd-402c-806e-98a32700621b)