fips/packaging/debian/build-deb-container.sh

#!/bin/bash
# Build the Debian package in the pinned build container, then check its floor.
#
# This is the one place the Linux artifacts are produced. The release workflow,
# the CI integration job and a local run all call it, so all three build the
# same way and a package that passes locally is the package that ships. That was
# not true before: the test suite built its own package inside a Debian 12 image
# while the release built on the newest GitHub runner, so the suite could not
# exhibit a defect that only the release environment produced -- and for five
# releases it did not.
#
# Usage: build-deb-container.sh [--output-dir DIR] [--version V] [--features LIST]
#                               [--rebuild-image] [--image-archive PATH]
#        build-deb-container.sh --print-image-tag
#
# Requires docker, except for --print-image-tag. The image is cached between
# runs under a tag made of the floor image, the Rust toolchain and a hash of
# Dockerfile.build, so a change to any of the three builds a new image; the
# source is mounted rather than copied, so editing code does not invalidate it.
#
# --print-image-tag prints that tag and exits. --image-archive carries the image
# between hosts that do not share a docker daemon, such as fresh CI runners:
# when the image is absent and PATH exists it is loaded from there, and when
# this run builds the image it is saved there. A bad archive is warned about and
# the image rebuilt; it never fails the build.

set -euo pipefail

SCRIPT_DIR="$(cd "$(dirname "$0")" && pwd)"
REPO_ROOT="$(cd "$SCRIPT_DIR/../.." && pwd)"

# shellcheck source=../build-floor.env
. "$REPO_ROOT/packaging/build-floor.env"

DEST_DIR="$REPO_ROOT/deploy"
VERSION=""
FEATURES=""
REBUILD_IMAGE=0
PRINT_TAG=0
IMAGE_ARCHIVE=""

while [[ $# -gt 0 ]]; do
    case "$1" in
        --output-dir)    DEST_DIR="${2:?missing value for --output-dir}"; shift 2 ;;
        --version)       VERSION="${2:?missing value for --version}"; shift 2 ;;
        --features)      FEATURES="${2:?missing value for --features}"; shift 2 ;;
        --rebuild-image) REBUILD_IMAGE=1; shift ;;
        --print-image-tag) PRINT_TAG=1; shift ;;
        --image-archive) IMAGE_ARCHIVE="${2:?missing value for --image-archive}"; shift 2 ;;
        -h|--help)       sed -n '2,25p' "$0"; exit 0 ;;
        *)               echo "Unknown option: $1" >&2; exit 2 ;;
    esac
done

# Read the toolchain from the pin rather than choosing one here, and put it in
# the tag so a bump rebuilds the image instead of silently reusing a stale one.
# The Dockerfile's content goes in the tag for the same reason: without it a
# host that has the image cached keeps using it after the Dockerfile changes.
RUST_TOOLCHAIN=$(awk -F'"' '/^channel *=/{print $2; exit}' "$REPO_ROOT/rust-toolchain.toml")
[ -n "$RUST_TOOLCHAIN" ] || {
    echo "build-deb-container: could not read channel from rust-toolchain.toml" >&2
    exit 2
}

DOCKERFILE_HASH=$(sha256sum "$SCRIPT_DIR/Dockerfile.build" | cut -c1-12) || DOCKERFILE_HASH=""
[[ "$DOCKERFILE_HASH" =~ ^[0-9a-f]{12}$ ]] || {
    echo "build-deb-container: could not hash $SCRIPT_DIR/Dockerfile.build" >&2
    exit 2
}

IMAGE_TAG="fips-deb-builder:${FIPS_BUILD_IMAGE//[:\/]/-}-rust${RUST_TOOLCHAIN}-${DOCKERFILE_HASH}"

# Before the docker check, so a workflow can key a cache on the tag without
# docker being involved.
if [ "$PRINT_TAG" -eq 1 ]; then
    printf '%s\n' "$IMAGE_TAG"
    exit 0
fi

command -v docker >/dev/null 2>&1 || {
    echo "build-deb-container: docker is required and was not found." >&2
    exit 2
}

# A problem with the image archive is a warning, not a failure: the archive only
# saves time, and failing a release over a bad cache entry would hold the tag
# until someone removed the entry by hand. The ::warning:: line puts it on the
# GitHub run summary; the plain line is for everywhere else.
archive_warning() {
    echo "::warning::build-deb-container: $*"
    echo "build-deb-container: warning: $*" >&2
}

# Stays unset when the image was found or loaded, so only an image this run
# built is saved: saving a loaded one would only rewrite the archive it came from.
BUILT_IMAGE=0
if [ "$REBUILD_IMAGE" -eq 1 ]; then
    BUILT_IMAGE=1
elif docker image inspect "$IMAGE_TAG" >/dev/null 2>&1; then
    echo "=== Using cached $IMAGE_TAG ===" >&2
elif [ -n "$IMAGE_ARCHIVE" ] && [ -f "$IMAGE_ARCHIVE" ]; then
    echo "=== Loading $IMAGE_TAG from $IMAGE_ARCHIVE ===" >&2
    if ! docker load -i "$IMAGE_ARCHIVE" >&2; then
        archive_warning "could not load $IMAGE_ARCHIVE; building $IMAGE_TAG instead"
        BUILT_IMAGE=1
    elif ! docker image inspect "$IMAGE_TAG" >/dev/null 2>&1; then
        archive_warning "$IMAGE_ARCHIVE does not hold $IMAGE_TAG; building it instead"
        BUILT_IMAGE=1
    else
        echo "=== Using $IMAGE_TAG loaded from $IMAGE_ARCHIVE ===" >&2
    fi
else
    BUILT_IMAGE=1
fi

if [ "$BUILT_IMAGE" -eq 1 ]; then
    echo "=== Building $IMAGE_TAG from $FIPS_BUILD_IMAGE with Rust $RUST_TOOLCHAIN ===" >&2
    docker build \
        --build-arg "BASE=$FIPS_BUILD_IMAGE" \
        --build-arg "RUST_TOOLCHAIN=$RUST_TOOLCHAIN" \
        -t "$IMAGE_TAG" \
        -f "$SCRIPT_DIR/Dockerfile.build" \
        "$SCRIPT_DIR"

    # Written to a temporary name and renamed, so a failed or interrupted save
    # never leaves a truncated archive where a cache step would pick it up.
    if [ -n "$IMAGE_ARCHIVE" ]; then
        ARCHIVE_TMP="$IMAGE_ARCHIVE.tmp.$$"
        if docker save "$IMAGE_TAG" -o "$ARCHIVE_TMP" >&2 \
                && mv -f "$ARCHIVE_TMP" "$IMAGE_ARCHIVE"; then
            echo "=== Saved $IMAGE_TAG to $IMAGE_ARCHIVE ===" >&2
        else
            rm -f "$ARCHIVE_TMP"
            archive_warning "could not save $IMAGE_TAG to $IMAGE_ARCHIVE; the next run will build it again"
        fi
    fi
fi

# Derive the version and the timestamp on the host and pass both in, because a
# worktree's .git is a file pointing outside the mount and does not resolve in
# the container. The image's git is there only for build.rs's revision, which is
# empty for a worktree build for the same reason.
if [ -z "$VERSION" ]; then
    CRATE_VERSION=$(awk -F'"' '/^version = /{print $2; exit}' "$REPO_ROOT/Cargo.toml")
    if [[ "$CRATE_VERSION" == *-dev ]]; then
        GIT_DATE=$(git -C "$REPO_ROOT" log -1 --format=%cs | tr -d '-')
        GIT_SHA=$(git -C "$REPO_ROOT" rev-parse --short HEAD)
        DIRTY=""
        [ -n "$(git -C "$REPO_ROOT" status --porcelain 2>/dev/null)" ] && DIRTY=".dirty"
        VERSION="${CRATE_VERSION%-dev}~dev+git${GIT_DATE}.${GIT_SHA}${DIRTY}-1"
    else
        VERSION="$CRATE_VERSION"
    fi
fi
SOURCE_DATE_EPOCH="${SOURCE_DATE_EPOCH:-$(git -C "$REPO_ROOT" log -1 --format=%ct)}"

mkdir -p "$DEST_DIR"
DEST_ABS="$(cd "$DEST_DIR" && pwd)"

echo "=== Building fips $VERSION in $IMAGE_TAG ===" >&2

# A feature build hands the whole job to build-deb.sh rather than pre-building:
# --features has to reach cargo, and build-deb.sh is also what marks the version
# so a feature package is distinguishable from the default build of the same
# commit. It refuses --features with --no-build for exactly that reason, so the
# two cases cannot share one command.
if [ -n "$FEATURES" ]; then
    # build-deb.sh does the whole job here: --features has to reach cargo, and
    # it is also what marks the version so a feature package is distinguishable
    # from the default build of the same commit. It refuses --features with
    # --no-build for that reason, so the two cases cannot share one command.
    # The version still comes from the host, because a worktree's .git does
    # not resolve inside the mount.
    BUILD_CMD="packaging/debian/build-deb.sh --features '$FEATURES' --version '$VERSION' --output-dir /out --name-file /name/deb"
else
    BUILD_CMD="cargo build --release --locked
        packaging/debian/build-deb.sh --no-build --version '$VERSION' --output-dir /out --name-file /name/deb"
fi

# The build names the package it produced rather than this script picking one
# out of the output directory. The output directory is the caller's and may
# already hold packages from earlier runs; a search there by name or by age
# could return one of those, and a package that sorts higher by name was
# returned in preference to the one just built. The name travels through a
# directory of its own, created fresh for this run, so a name left by an
# earlier run cannot be read and nothing extra is left in the output directory.
NAME_DIR=$(mktemp -d)
trap 'rm -rf "$NAME_DIR"' EXIT

# The source is mounted read-only so a build cannot leave artifacts in the tree.
# CARGO_TARGET_DIR and the registry live in named volumes, which is what makes a
# second run fast; they are per-base-image so a floor change does not reuse
# objects linked against the wrong C library.
VOL_SUFFIX="${FIPS_BUILD_IMAGE//[:\/]/-}"
docker run --rm \
    -v "$REPO_ROOT":/src:ro \
    -v "$DEST_ABS":/out \
    -v "$NAME_DIR":/name \
    -v "fips-deb-target-${VOL_SUFFIX}":/target \
    -v "fips-deb-registry-${VOL_SUFFIX}":/usr/local/cargo/registry \
    -e CARGO_TARGET_DIR=/target \
    -e SOURCE_DATE_EPOCH="$SOURCE_DATE_EPOCH" \
    -w /src \
    "$IMAGE_TAG" \
    bash -euo pipefail -c "$BUILD_CMD" >&2

DEB_NAME=""
[ -f "$NAME_DIR/deb" ] && DEB_NAME=$(head -n 1 "$NAME_DIR/deb")
[ -n "$DEB_NAME" ] || {
    echo "build-deb-container: the build did not name its package" >&2
    exit 1
}
if [[ "$DEB_NAME" == */* || "$DEB_NAME" != fips_*_*.deb ]]; then
    echo "build-deb-container: the build named '$DEB_NAME', which is not a package file name" >&2
    exit 1
fi
DEB="$DEST_ABS/$DEB_NAME"
[ -f "$DEB" ] || {
    echo "build-deb-container: the build named $DEB_NAME but $DEB does not exist" >&2
    exit 1
}

# Check the artifact here rather than in one workflow, so every producer is
# gated: the release, the CI job, a local run and packaging/Makefile all reach
# both checks through this script. The glibc floor is read from the binaries
# and runs on the host. The Depends check runs in the build image, because it
# compares against dpkg-shlibdeps and has to read the same symbols files and C
# library that cargo-deb's "$auto" read; a host of another distribution could
# produce a difference of its own.
"$REPO_ROOT/testing/check-glibc-floor.sh" "$DEB" >&2
docker run --rm \
    -v "$REPO_ROOT":/src:ro \
    -v "$DEST_ABS":/out:ro \
    -w /src \
    "$IMAGE_TAG" \
    testing/check-deb-depends.sh "/out/$DEB_NAME" >&2

echo "=== Built $DEB ===" >&2
printf '%s\n' "$DEB"