Johnathan Corgan
bda327b5f5
The inbound FilterAnnounce cap at 0.10 rejects aggregates that are legitimately near their operating ceiling, before the network reaches the fixed-filter capacity limit. Raise the default to 0.20, which corresponds to fill 0.7248 at k=5, about 2,114 entries on the 1 KB filter (Swamidass-Baldi). Also remove the duplicate default definitions in BloomConfig. Each default was written twice, once in impl Default and once in the serde default function, with nothing enforcing that they agree, so a config file that omits the key took a different path from one that sets it. impl Default now delegates to the serde default functions, leaving a single source of truth.
FIPS Documentation
FIPS (Free Internetworking Peering System) is a self-organizing encrypted mesh network built on Nostr identities, capable of operating over arbitrary transports — local networks, the public internet, Tor, Bluetooth, or point-to-point links — without central infrastructure.
With FIPS, your machine becomes a node in the mesh with a self-generated cryptographic identity. There are two ways to deploy it.
As an overlay on top of existing IP networks, FIPS lets your node reach any other FIPS node wherever it sits — behind a NAT, on a different ISP, on a phone over cellular, on a laptop with only Bluetooth in range, or behind a Tor onion. The mesh forwards IPv6 traffic transparently and end-to-end encrypted, with no central VPN concentrator or coordinating server.
From the ground up over raw Ethernet, WiFi, or Bluetooth, FIPS provides a complete permissionless network without any pre-existing IP infrastructure, ISP, or DNS. Any node that joins the link gets routable IPv6 addresses, peer discovery, and a path to every other node automatically.
Either way, existing networking software runs over it unchanged: SSH, HTTP servers, file transfer, anything IPv6-native works the same way it would on a local network.
New to FIPS? Start with the Getting Started guide.
Documentation Sections
Tutorials
If you are starting from scratch and want a guided path to a working mesh, go here.
How-To Guides
If you have a specific task in mind — enabling a feature, deploying a component, diagnosing a problem — go here.
Reference
If you need to look up wire formats, configuration keys, command flags, or counter inventories, go here.
Design
If you want to understand how the mesh self-organizes, why FIPS makes the choices it does, or how the pieces fit together, go here.