mirror of
https://github.com/jmcorgan/fips.git
synced 2026-10-05 19:18:25 +00:00
Johnathan Corgan
28f9fc007a
5353 is the mDNS port, which the daemon's LAN rendezvous, Avahi and systemd-resolved can hold. On an OpenWrt access point with the gateway enabled, the gateway lost the port to the daemon's mDNS responder and dnsmasq sent .fips queries to a responder that does not answer them. 5365 is unassigned by IANA and not used by any common resolver. The OpenWrt init script now points dnsmasq at the port gateway.dns.listen actually sets, falling back to the new default, and when it swaps the .fips forwarding it clears every loopback .fips entry rather than four fixed ones, so a stale entry for an old or custom port does not linger. Forwards to other hosts and other domains are kept. The shipped OpenWrt config and the example config leave the listen line at the default. fips.yaml is a conffile on OpenWrt, and fips-ap-setup edits it, so routers that set up an access point would keep the old explicit listen: "[::1]:5353" across an upgrade and stay broken after the default moved. The first-boot setup script, which every install and upgrade path runs before the services start, now rewrites that exact shipped line to the line a fresh install ships and logs that it did; any other value is left as configured. The script is sourced rather than executed on the SDK-feed and sysupgrade paths, so the migration runs last, cannot end the script early and cannot change its exit status. The script also removes stale loopback .fips forwarding entries for port 5353. The gateway warns at startup when it is configured on 5353, whether or not the bind succeeds, since an mDNS responder can take the port later. The OpenWrt scenario harness checks the port the init script reads, that its default matches the gateway's, and the swap's cleanup against a uci stub. It also runs the real setup script executed by both package managers' upgrade scripts and sourced in a subshell, and checks the negative, missing-file, repeat-run and stale-entry cases. The dns-resolver and deb-install harnesses check that the gateway binds the new default.
1129 lines
42 KiB
Bash
Executable File
1129 lines
42 KiB
Bash
Executable File
#!/bin/bash
|
|
# Test fips-dns-setup across different Linux resolver backends, plus
|
|
# an end-to-end scenario that verifies a real fips answers .fips
|
|
# queries through the configured backend.
|
|
#
|
|
# Each scenario runs a systemd-based Docker container, creates a dummy
|
|
# fips0 interface (or a real one for the e2e scenario), runs the setup
|
|
# script, verifies the detected backend and generated config, runs
|
|
# teardown, and verifies cleanup.
|
|
#
|
|
# The end-to-end scenarios take fips and fips-gateway from the Debian
|
|
# package, which is built in the pinned floor container and so runs on
|
|
# every target distro. Each starts the daemon, configures DNS via the
|
|
# script, and confirms `dig @127.0.0.53 AAAA <npub>.fips` returns a
|
|
# non-empty AAAA answer.
|
|
#
|
|
# Usage: ./test.sh [--deb PATH] [scenario ...]
|
|
# --deb PATH = take the binaries from this package. Without it the
|
|
# e2e scenarios build the package through
|
|
# packaging/debian/build-deb-container.sh.
|
|
# No scenarios = run all scenarios.
|
|
# Named scenarios = run only those (e.g., ./test.sh debian12-resolved e2e-debian12)
|
|
#
|
|
# Requirements: Docker able to grant SYS_ADMIN and NET_ADMIN and an
|
|
# unconfined AppArmor profile (the containers are not privileged; see
|
|
# testing/lib/systemd-container.sh). The e2e scenarios also need
|
|
# /dev/net/tun on the host (standard) and dpkg-deb to read the package.
|
|
|
|
set -uo pipefail
|
|
|
|
SCRIPT_DIR="$(cd "$(dirname "$0")" && pwd)"
|
|
# shellcheck source=SCRIPTDIR/../lib/systemd-container.sh
|
|
source "$SCRIPT_DIR/../lib/systemd-container.sh"
|
|
# shellcheck source=SCRIPTDIR/../lib/image-build.sh
|
|
source "$SCRIPT_DIR/../lib/image-build.sh"
|
|
REPO_ROOT="$(cd "$SCRIPT_DIR/../.." && pwd)"
|
|
SETUP_SCRIPT="$REPO_ROOT/packaging/common/fips-dns-setup"
|
|
TEARDOWN_SCRIPT="$REPO_ROOT/packaging/common/fips-dns-teardown"
|
|
CACHE_DIR="$SCRIPT_DIR/.cache"
|
|
FIPS_BIN_CACHE="$CACHE_DIR/fips"
|
|
FIPS_GATEWAY_BIN_CACHE="$CACHE_DIR/fips-gateway"
|
|
|
|
# Set by --deb. BINARIES_READY keeps the package unpack to a single
|
|
# operation however many e2e scenarios run in one process.
|
|
SUPPLIED_DEB=""
|
|
BINARIES_READY=0
|
|
|
|
# Timeout for systemd boot inside container
|
|
BOOT_TIMEOUT=30
|
|
|
|
# Timeout for fips to start serving DNS in the e2e scenario
|
|
DAEMON_TIMEOUT=15
|
|
|
|
PASS=0
|
|
FAIL=0
|
|
SKIP=0
|
|
|
|
# ─────────────────────────────────────────────────────────────────────
|
|
# Helpers
|
|
# ─────────────────────────────────────────────────────────────────────
|
|
|
|
log() { echo "=== $*"; }
|
|
pass() { echo " PASS: $*"; PASS=$((PASS + 1)); }
|
|
fail() { echo " FAIL: $*"; FAIL=$((FAIL + 1)); }
|
|
skip() { echo " SKIP: $*"; SKIP=$((SKIP + 1)); }
|
|
|
|
cleanup_container() {
|
|
local name="$1"
|
|
docker rm -f "$name" >/dev/null 2>&1 || true
|
|
}
|
|
|
|
# Build an image from an inline Dockerfile.
|
|
build_image() {
|
|
local tag="$1"
|
|
shift
|
|
local dockerfile="$*"
|
|
retry_build "docker build -t $tag" build_inline "$tag" "$dockerfile" "$REPO_ROOT" || return
|
|
return 0
|
|
}
|
|
|
|
# Start a systemd container in the background. Not privileged: see
|
|
# testing/lib/systemd-container.sh for the flags and why.
|
|
start_systemd_container() {
|
|
local name="$1" image="$2"
|
|
cleanup_container "$name"
|
|
run_quiet "docker run $name" \
|
|
docker run -d --name "$name" \
|
|
--label com.corganlabs.fips-ci=1 \
|
|
"${SYSTEMD_CAPS[@]}" \
|
|
--cgroupns=host \
|
|
-v /sys/fs/cgroup:/sys/fs/cgroup:rw \
|
|
--tmpfs /run --tmpfs /run/lock \
|
|
"$image" || return
|
|
check_isolation "$name"
|
|
return
|
|
}
|
|
|
|
# Same, but with TUN device for the e2e scenario.
|
|
#
|
|
# IPv6 forwarding is set here rather than inside the container because
|
|
# /proc/sys is read-only there. fips-gateway checks it before its DNS upstream
|
|
# check, so the gateway parity check needs it; the cost is that forwarding is
|
|
# on for every check in the scenario, including the daemon, setup and dig
|
|
# checks that run before the gateway.
|
|
start_systemd_container_with_tun() {
|
|
local name="$1" image="$2"
|
|
cleanup_container "$name"
|
|
run_quiet "docker run $name (with tun)" \
|
|
docker run -d --name "$name" \
|
|
--label com.corganlabs.fips-ci=1 \
|
|
"${SYSTEMD_CAPS[@]}" \
|
|
--cgroupns=host \
|
|
--device /dev/net/tun \
|
|
--sysctl net.ipv6.conf.all.forwarding=1 \
|
|
-v /sys/fs/cgroup:/sys/fs/cgroup:rw \
|
|
--tmpfs /run --tmpfs /run/lock \
|
|
"$image" || return
|
|
check_isolation "$name"
|
|
return
|
|
}
|
|
|
|
# Report why systemd never reached a running state. Every probe is
|
|
# best-effort and captured with its own stderr: the container may have
|
|
# exited, or never have been created at all, and the docker error text
|
|
# saying so is itself the diagnosis.
|
|
dump_systemd_state() {
|
|
local name="$1" out
|
|
out=$(mktemp)
|
|
{
|
|
echo "== docker ps -a"
|
|
docker ps -a --filter "name=^${name}$" 2>&1
|
|
echo "== systemctl is-system-running"
|
|
docker exec "$name" systemctl is-system-running 2>&1
|
|
echo "== systemctl list-units --failed"
|
|
docker exec "$name" systemctl list-units --failed --no-pager 2>&1
|
|
echo "== journalctl -b (last 100 lines)"
|
|
docker exec "$name" journalctl -b --no-pager -n 100 2>&1
|
|
echo "== docker logs (last 100 lines)"
|
|
docker logs --tail 100 "$name" 2>&1
|
|
} >"$out" 2>&1
|
|
dump_output "systemd boot of $name" "$out"
|
|
rm -f "$out"
|
|
}
|
|
|
|
# Wait for systemd to reach a bootable state inside the container.
|
|
wait_for_systemd() {
|
|
local name="$1"
|
|
local state
|
|
for _i in $(seq 1 "$BOOT_TIMEOUT"); do
|
|
# Read the state rather than piping it into grep. systemctl exits
|
|
# non-zero for "degraded", and pipefail turns that into a failed
|
|
# pipeline even when grep matched, so the piped form could never
|
|
# accept a degraded boot: in a container systemd-modules-load
|
|
# always fails, so every scenario burned the full timeout and
|
|
# warned about a container that had in fact booted.
|
|
state=$(docker exec "$name" systemctl is-system-running --wait 2>/dev/null)
|
|
case "$state" in
|
|
*running*|*degraded*) return 0 ;;
|
|
esac
|
|
sleep 1
|
|
done
|
|
echo " WARNING: systemd did not reach running state in ${BOOT_TIMEOUT}s (may still work)"
|
|
dump_systemd_state "$name"
|
|
return 0
|
|
}
|
|
|
|
# Create dummy fips0 interface inside the container.
|
|
create_fips0() {
|
|
local name="$1"
|
|
docker exec "$name" ip link add fips0 type dummy 2>/dev/null
|
|
docker exec "$name" ip link set fips0 up 2>/dev/null
|
|
}
|
|
|
|
# Copy scripts into the container and run setup.
|
|
run_setup() {
|
|
local name="$1"
|
|
docker cp "$SETUP_SCRIPT" "$name:/usr/local/bin/fips-dns-setup"
|
|
docker cp "$TEARDOWN_SCRIPT" "$name:/usr/local/bin/fips-dns-teardown"
|
|
docker exec "$name" chmod +x /usr/local/bin/fips-dns-setup /usr/local/bin/fips-dns-teardown
|
|
# Exit code may be non-zero due to service reload failures in containers.
|
|
# We test detection and config generation, not service operation.
|
|
docker exec "$name" /usr/local/bin/fips-dns-setup 2>&1 || true
|
|
}
|
|
|
|
run_teardown() {
|
|
local name="$1"
|
|
docker exec "$name" /usr/local/bin/fips-dns-teardown 2>&1 || true
|
|
}
|
|
|
|
get_backend() {
|
|
local name="$1"
|
|
docker exec "$name" cat /run/fips/dns-backend 2>/dev/null || echo "(missing)"
|
|
}
|
|
|
|
file_exists() {
|
|
local name="$1" path="$2"
|
|
docker exec "$name" test -f "$path" 2>/dev/null
|
|
}
|
|
|
|
file_contains() {
|
|
local name="$1" path="$2" needle="$3"
|
|
docker exec "$name" grep -qF "$needle" "$path" 2>/dev/null
|
|
}
|
|
|
|
# Pass only when the file is confirmed absent after teardown. Negating
|
|
# file_exists fails open: `docker exec` exits non-zero for a container
|
|
# that is gone just as `test -f` does for a missing file, so a teardown
|
|
# that took the container down would read as clean. When the check
|
|
# cannot run, name the unreachable container rather than the file.
|
|
check_removed() {
|
|
local name="$1" path="$2" okmsg="$3" badmsg="$4"
|
|
if docker exec "$name" test ! -f "$path" 2>/dev/null; then
|
|
pass "$okmsg"
|
|
elif [ "$(docker inspect -f '{{.State.Running}}' "$name" 2>/dev/null)" != true ]; then
|
|
fail "could not check $path after teardown: container $name is not running"
|
|
else
|
|
fail "$badmsg"
|
|
fi
|
|
}
|
|
|
|
# Get the major systemd version inside a container.
|
|
container_systemd_version() {
|
|
local name="$1"
|
|
docker exec "$name" systemctl --version 2>/dev/null | head -1 \
|
|
| grep -oE '[0-9]+' | head -1
|
|
}
|
|
|
|
# Verify the expected systemd-resolved-flavoured backend was picked
|
|
# and that its config file targets the new [::1]:5354 daemon bind.
|
|
# On systemd >= 258 the dns-delegate backend wins; otherwise
|
|
# global-drop-in. Either way the daemon target must be ::1 — that's
|
|
# the regression we're locking in.
|
|
verify_resolved_backend() {
|
|
local name="$1"
|
|
local ver
|
|
ver=$(container_systemd_version "$name")
|
|
local backend
|
|
backend=$(get_backend "$name")
|
|
|
|
local expected_backend expected_path
|
|
if [ -n "$ver" ] && [ "$ver" -ge 258 ]; then
|
|
expected_backend="dns-delegate"
|
|
expected_path="/etc/systemd/dns-delegate.d/fips.dns-delegate"
|
|
else
|
|
expected_backend="global-drop-in"
|
|
expected_path="/etc/systemd/resolved.conf.d/fips.conf"
|
|
fi
|
|
|
|
if [ "$backend" = "$expected_backend" ]; then
|
|
pass "detected backend: $expected_backend (systemd $ver)"
|
|
else
|
|
fail "expected $expected_backend (systemd $ver), got: $backend"
|
|
fi
|
|
|
|
if file_exists "$name" "$expected_path"; then
|
|
pass "config file written at $expected_path"
|
|
else
|
|
fail "config file missing at $expected_path"
|
|
return
|
|
fi
|
|
|
|
# All systemd-flavoured backends must target [::1]:5354 to match
|
|
# the daemon's default bind. If they don't, queries silently fail
|
|
# — Linux IPv6 sockets bound to ::1 do not accept v4 traffic.
|
|
if file_contains "$name" "$expected_path" "[::1]:5354"; then
|
|
pass "config DNS target is [::1]:5354 (matches daemon default)"
|
|
else
|
|
fail "config DNS target wrong — must be [::1]:5354"
|
|
echo " contents: $(docker exec "$name" cat "$expected_path")"
|
|
fi
|
|
|
|
# Domain forwarding line: dns-delegate uses 'Domains=fips',
|
|
# global-drop-in uses 'Domains=~fips' (wildcard prefix).
|
|
local expected_domain_line
|
|
if [ "$expected_backend" = "dns-delegate" ]; then
|
|
expected_domain_line="Domains=fips"
|
|
else
|
|
expected_domain_line="Domains=~fips"
|
|
fi
|
|
if file_contains "$name" "$expected_path" "$expected_domain_line"; then
|
|
pass "config Domains line correct ($expected_domain_line)"
|
|
else
|
|
fail "config Domains line incorrect — expected $expected_domain_line"
|
|
fi
|
|
|
|
run_teardown "$name" >/dev/null 2>&1
|
|
check_removed "$name" "$expected_path" \
|
|
"teardown removed config file" \
|
|
"config file still exists after teardown"
|
|
check_removed "$name" /run/fips/dns-backend \
|
|
"teardown cleaned state file" \
|
|
"state file still exists after teardown"
|
|
}
|
|
|
|
# ─────────────────────────────────────────────────────────────────────
|
|
# Take fips and fips-gateway from the Debian package rather than
|
|
# compiling them here. The package is built in the pinned floor
|
|
# container (packaging/build-floor.env), whose glibc is the lowest of
|
|
# every target distro, so its binaries run in all five e2e images. The
|
|
# suite used to compile its own copy in a Debian 12 image with whatever
|
|
# Rust was current, which was a second, uncached release build per run
|
|
# and was not the toolchain or the build that ships.
|
|
#
|
|
# With --deb the caller's package is used, which is how CI runs it:
|
|
# one package build serves this suite and the install suite. Without
|
|
# it, the package is built through the same container script the
|
|
# release uses. Done once per process however many e2e scenarios run.
|
|
# ─────────────────────────────────────────────────────────────────────
|
|
|
|
prepare_binaries() {
|
|
if [ "$BINARIES_READY" -eq 1 ]; then
|
|
return 0
|
|
fi
|
|
|
|
if ! command -v dpkg-deb >/dev/null 2>&1; then
|
|
echo " ERROR: dpkg-deb is required to read the package and was not found" >&2
|
|
return 1
|
|
fi
|
|
|
|
mkdir -p "$CACHE_DIR"
|
|
local deb
|
|
if [ -n "$SUPPLIED_DEB" ]; then
|
|
deb="$SUPPLIED_DEB"
|
|
log "Using the supplied package $(basename "$deb")"
|
|
else
|
|
# The cache holds one package at a time, and the package used is
|
|
# the one the build names on the last line of its stdout, never one
|
|
# found by listing the directory (as in deb-install/test.sh).
|
|
log "Building the .deb in the pinned build container (slow on first run)"
|
|
mkdir -p "$CACHE_DIR/deb"
|
|
rm -f "$CACHE_DIR"/deb/*.deb
|
|
local build_out
|
|
if ! build_out=$(bash "$REPO_ROOT/packaging/debian/build-deb-container.sh" \
|
|
--output-dir "$CACHE_DIR/deb"); then
|
|
echo " ERROR: container build failed" >&2
|
|
return 1
|
|
fi
|
|
deb=$(printf '%s\n' "$build_out" | tail -n 1)
|
|
if [ -z "$deb" ] || [ ! -f "$deb" ]; then
|
|
echo " ERROR: the container build did not report a package path: '$deb'" >&2
|
|
return 1
|
|
fi
|
|
fi
|
|
|
|
# Drop the previous run's binaries before extracting. Without this, a
|
|
# failed extraction below leaves them in place and the e2e scenarios
|
|
# silently exercise the previous commit's code.
|
|
rm -f "$FIPS_BIN_CACHE" "$FIPS_GATEWAY_BIN_CACHE"
|
|
|
|
local tmp err
|
|
tmp=$(mktemp -d)
|
|
if ! err=$(dpkg-deb -x "$deb" "$tmp" 2>&1); then
|
|
echo " ERROR: dpkg-deb could not unpack $deb: $err" >&2
|
|
rm -rf "$tmp"
|
|
return 1
|
|
fi
|
|
|
|
local spec bin dest
|
|
for spec in "fips:$FIPS_BIN_CACHE" "fips-gateway:$FIPS_GATEWAY_BIN_CACHE"; do
|
|
bin="${spec%%:*}"
|
|
dest="${spec#*:}"
|
|
if [ ! -f "$tmp/usr/bin/$bin" ] || [ ! -s "$tmp/usr/bin/$bin" ]; then
|
|
echo " ERROR: $(basename "$deb") has no usable /usr/bin/$bin" >&2
|
|
rm -rf "$tmp"
|
|
return 1
|
|
fi
|
|
if ! install -m 0755 "$tmp/usr/bin/$bin" "$dest"; then
|
|
echo " ERROR: could not install $bin to $dest" >&2
|
|
rm -rf "$tmp"
|
|
return 1
|
|
fi
|
|
done
|
|
rm -rf "$tmp"
|
|
|
|
for dest in "$FIPS_BIN_CACHE" "$FIPS_GATEWAY_BIN_CACHE"; do
|
|
log "$(basename "$dest"): $(stat -c %s "$dest") bytes, sha256 $(sha256sum "$dest" | cut -d' ' -f1)"
|
|
done
|
|
BINARIES_READY=1
|
|
return 0
|
|
}
|
|
|
|
# ─────────────────────────────────────────────────────────────────────
|
|
# Scenarios — script-behavior tests across distros (no daemon)
|
|
# ─────────────────────────────────────────────────────────────────────
|
|
|
|
test_debian12_resolved() {
|
|
local name="fips-dns-test-deb12-resolved${FIPS_CI_NAME_SUFFIX:-}"
|
|
local image="fips-dns-test:debian12-resolved"
|
|
log "Debian 12 + systemd-resolved (expects global-drop-in)"
|
|
|
|
build_image "$image" "$(cat <<'DOCKERFILE'
|
|
FROM debian:12
|
|
ENV DEBIAN_FRONTEND=noninteractive
|
|
RUN apt-get update && apt-get install -y --no-install-recommends \
|
|
systemd systemd-resolved iproute2 dbus && \
|
|
apt-get clean && rm -rf /var/lib/apt/lists/* && \
|
|
systemctl enable systemd-resolved
|
|
CMD ["/lib/systemd/systemd"]
|
|
DOCKERFILE
|
|
)" || { fail "build failed"; return; }
|
|
|
|
start_systemd_container "$name" "$image"
|
|
wait_for_systemd "$name"
|
|
create_fips0 "$name"
|
|
|
|
local output
|
|
output=$(run_setup "$name" 2>&1)
|
|
echo " output: $output"
|
|
|
|
verify_resolved_backend "$name"
|
|
cleanup_container "$name"
|
|
}
|
|
|
|
test_debian13_resolved() {
|
|
local name="fips-dns-test-deb13-resolved${FIPS_CI_NAME_SUFFIX:-}"
|
|
local image="fips-dns-test:debian13-resolved"
|
|
log "Debian 13 (trixie) + systemd-resolved (expects global-drop-in)"
|
|
|
|
build_image "$image" "$(cat <<'DOCKERFILE'
|
|
FROM debian:trixie
|
|
ENV DEBIAN_FRONTEND=noninteractive
|
|
RUN apt-get update && apt-get install -y --no-install-recommends \
|
|
systemd systemd-resolved iproute2 dbus && \
|
|
apt-get clean && rm -rf /var/lib/apt/lists/* && \
|
|
systemctl enable systemd-resolved
|
|
CMD ["/lib/systemd/systemd"]
|
|
DOCKERFILE
|
|
)" || { fail "build failed"; return; }
|
|
|
|
start_systemd_container "$name" "$image"
|
|
wait_for_systemd "$name"
|
|
create_fips0 "$name"
|
|
|
|
local output
|
|
output=$(run_setup "$name" 2>&1)
|
|
echo " output: $output"
|
|
|
|
verify_resolved_backend "$name"
|
|
cleanup_container "$name"
|
|
}
|
|
|
|
test_ubuntu22_resolved() {
|
|
local name="fips-dns-test-u22-resolved${FIPS_CI_NAME_SUFFIX:-}"
|
|
local image="fips-dns-test:ubuntu22-resolved"
|
|
log "Ubuntu 22.04 + systemd-resolved (expects global-drop-in)"
|
|
|
|
# On Ubuntu 22.04 systemd-resolved is bundled with systemd (not a
|
|
# separate package). Just enable the service.
|
|
build_image "$image" "$(cat <<'DOCKERFILE'
|
|
FROM ubuntu:22.04
|
|
ENV DEBIAN_FRONTEND=noninteractive
|
|
RUN apt-get update && apt-get install -y --no-install-recommends \
|
|
systemd iproute2 dbus && \
|
|
apt-get clean && rm -rf /var/lib/apt/lists/* && \
|
|
systemctl enable systemd-resolved
|
|
CMD ["/lib/systemd/systemd"]
|
|
DOCKERFILE
|
|
)" || { fail "build failed"; return; }
|
|
|
|
start_systemd_container "$name" "$image"
|
|
wait_for_systemd "$name"
|
|
create_fips0 "$name"
|
|
|
|
local output
|
|
output=$(run_setup "$name" 2>&1)
|
|
echo " output: $output"
|
|
|
|
verify_resolved_backend "$name"
|
|
cleanup_container "$name"
|
|
}
|
|
|
|
test_ubuntu24_resolved() {
|
|
local name="fips-dns-test-u24-resolved${FIPS_CI_NAME_SUFFIX:-}"
|
|
local image="fips-dns-test:ubuntu24-resolved"
|
|
log "Ubuntu 24.04 + systemd-resolved (expects global-drop-in)"
|
|
|
|
build_image "$image" "$(cat <<'DOCKERFILE'
|
|
FROM ubuntu:24.04
|
|
ENV DEBIAN_FRONTEND=noninteractive
|
|
RUN apt-get update && apt-get install -y --no-install-recommends \
|
|
systemd systemd-resolved iproute2 dbus && \
|
|
apt-get clean && rm -rf /var/lib/apt/lists/* && \
|
|
systemctl enable systemd-resolved
|
|
CMD ["/lib/systemd/systemd"]
|
|
DOCKERFILE
|
|
)" || { fail "build failed"; return; }
|
|
|
|
start_systemd_container "$name" "$image"
|
|
wait_for_systemd "$name"
|
|
create_fips0 "$name"
|
|
|
|
local output
|
|
output=$(run_setup "$name" 2>&1)
|
|
echo " output: $output"
|
|
|
|
verify_resolved_backend "$name"
|
|
cleanup_container "$name"
|
|
}
|
|
|
|
test_ubuntu26_resolved() {
|
|
local name="fips-dns-test-u26-resolved${FIPS_CI_NAME_SUFFIX:-}"
|
|
local image="fips-dns-test:ubuntu26-resolved"
|
|
log "Ubuntu 26.04 + systemd-resolved (expects global-drop-in)"
|
|
|
|
build_image "$image" "$(cat <<'DOCKERFILE'
|
|
FROM ubuntu:26.04
|
|
ENV DEBIAN_FRONTEND=noninteractive
|
|
RUN apt-get update && apt-get install -y --no-install-recommends \
|
|
systemd systemd-resolved iproute2 dbus && \
|
|
apt-get clean && rm -rf /var/lib/apt/lists/* && \
|
|
systemctl enable systemd-resolved
|
|
CMD ["/lib/systemd/systemd"]
|
|
DOCKERFILE
|
|
)" || { fail "build failed"; return; }
|
|
|
|
start_systemd_container "$name" "$image"
|
|
wait_for_systemd "$name"
|
|
create_fips0 "$name"
|
|
|
|
local output
|
|
output=$(run_setup "$name" 2>&1)
|
|
echo " output: $output"
|
|
|
|
verify_resolved_backend "$name"
|
|
cleanup_container "$name"
|
|
}
|
|
|
|
test_dnsmasq() {
|
|
local name="fips-dns-test-dnsmasq${FIPS_CI_NAME_SUFFIX:-}"
|
|
local image="fips-dns-test:dnsmasq"
|
|
log "Debian 12 + dnsmasq standalone"
|
|
|
|
build_image "$image" "$(cat <<'DOCKERFILE'
|
|
FROM debian:12
|
|
ENV DEBIAN_FRONTEND=noninteractive
|
|
RUN apt-get update && apt-get install -y --no-install-recommends \
|
|
systemd dnsmasq iproute2 dbus && \
|
|
apt-get clean && rm -rf /var/lib/apt/lists/* && \
|
|
systemctl enable dnsmasq && \
|
|
mkdir -p /etc/dnsmasq.d
|
|
CMD ["/lib/systemd/systemd"]
|
|
DOCKERFILE
|
|
)" || { fail "build failed"; return; }
|
|
|
|
start_systemd_container "$name" "$image"
|
|
wait_for_systemd "$name"
|
|
create_fips0 "$name"
|
|
|
|
local output
|
|
output=$(run_setup "$name" 2>&1)
|
|
echo " output: $output"
|
|
|
|
local backend
|
|
backend=$(get_backend "$name")
|
|
if [ "$backend" = "dnsmasq" ]; then
|
|
pass "detected backend: dnsmasq"
|
|
else
|
|
fail "expected dnsmasq, got: $backend"
|
|
fi
|
|
|
|
# Verify config file was written
|
|
if file_exists "$name" /etc/dnsmasq.d/fips.conf; then
|
|
pass "dnsmasq config written"
|
|
echo " config: $(docker exec "$name" cat /etc/dnsmasq.d/fips.conf)"
|
|
else
|
|
fail "dnsmasq config not found"
|
|
fi
|
|
|
|
# Verify config targets ::1#5354 (the daemon's default IPv6
|
|
# loopback bind). Drift from this constant would silently break
|
|
# resolution on hosts using this backend.
|
|
if file_contains "$name" /etc/dnsmasq.d/fips.conf "server=/fips/::1#5354"; then
|
|
pass "dnsmasq config targets ::1#5354 (matches daemon default)"
|
|
else
|
|
fail "dnsmasq config target wrong — must be server=/fips/::1#5354"
|
|
fi
|
|
|
|
# Teardown
|
|
run_teardown "$name" >/dev/null 2>&1
|
|
check_removed "$name" /etc/dnsmasq.d/fips.conf \
|
|
"teardown removed dnsmasq config" \
|
|
"dnsmasq config still exists after teardown"
|
|
check_removed "$name" /run/fips/dns-backend \
|
|
"teardown cleaned state file" \
|
|
"state file still exists after teardown"
|
|
|
|
cleanup_container "$name"
|
|
}
|
|
|
|
test_nm_dnsmasq() {
|
|
local name="fips-dns-test-nm-dnsmasq${FIPS_CI_NAME_SUFFIX:-}"
|
|
local image="fips-dns-test:nm-dnsmasq"
|
|
log "Fedora + NetworkManager + dnsmasq plugin"
|
|
|
|
build_image "$image" "$(cat <<'DOCKERFILE'
|
|
FROM fedora:latest
|
|
RUN dnf install -y systemd NetworkManager dnsmasq iproute && \
|
|
dnf clean all && \
|
|
mkdir -p /etc/NetworkManager/conf.d /etc/NetworkManager/dnsmasq.d && \
|
|
printf '[main]\ndns=dnsmasq\n' > /etc/NetworkManager/conf.d/dns.conf && \
|
|
systemctl enable NetworkManager && \
|
|
systemctl disable systemd-resolved && \
|
|
systemctl mask systemd-resolved
|
|
CMD ["/sbin/init"]
|
|
DOCKERFILE
|
|
)" || { fail "build failed"; return; }
|
|
|
|
start_systemd_container "$name" "$image"
|
|
wait_for_systemd "$name"
|
|
create_fips0 "$name"
|
|
|
|
local output
|
|
output=$(run_setup "$name" 2>&1)
|
|
echo " output: $output"
|
|
|
|
local backend
|
|
backend=$(get_backend "$name")
|
|
if [ "$backend" = "nm-dnsmasq" ]; then
|
|
pass "detected backend: nm-dnsmasq"
|
|
else
|
|
fail "expected nm-dnsmasq, got: $backend"
|
|
fi
|
|
|
|
if file_exists "$name" /etc/NetworkManager/dnsmasq.d/fips.conf; then
|
|
pass "NM dnsmasq config written"
|
|
echo " config: $(docker exec "$name" cat /etc/NetworkManager/dnsmasq.d/fips.conf)"
|
|
else
|
|
fail "NM dnsmasq config not found"
|
|
fi
|
|
|
|
if file_contains "$name" /etc/NetworkManager/dnsmasq.d/fips.conf "server=/fips/::1#5354"; then
|
|
pass "NM dnsmasq config targets ::1#5354 (matches daemon default)"
|
|
else
|
|
fail "NM dnsmasq config target wrong — must be server=/fips/::1#5354"
|
|
fi
|
|
|
|
# Teardown
|
|
run_teardown "$name" >/dev/null 2>&1
|
|
check_removed "$name" /etc/NetworkManager/dnsmasq.d/fips.conf \
|
|
"teardown removed NM dnsmasq config" \
|
|
"NM dnsmasq config still exists after teardown"
|
|
check_removed "$name" /run/fips/dns-backend \
|
|
"teardown cleaned state file" \
|
|
"state file still exists after teardown"
|
|
|
|
cleanup_container "$name"
|
|
}
|
|
|
|
test_no_resolver() {
|
|
local name="fips-dns-test-none${FIPS_CI_NAME_SUFFIX:-}"
|
|
local image="fips-dns-test:none"
|
|
log "Debian 12 bare (no resolver)"
|
|
|
|
build_image "$image" "$(cat <<'DOCKERFILE'
|
|
FROM debian:12
|
|
ENV DEBIAN_FRONTEND=noninteractive
|
|
RUN apt-get update && apt-get install -y --no-install-recommends \
|
|
systemd iproute2 dbus && \
|
|
apt-get clean && rm -rf /var/lib/apt/lists/*
|
|
CMD ["/lib/systemd/systemd"]
|
|
DOCKERFILE
|
|
)" || { fail "build failed"; return; }
|
|
|
|
start_systemd_container "$name" "$image"
|
|
wait_for_systemd "$name"
|
|
create_fips0 "$name"
|
|
|
|
local output
|
|
output=$(run_setup "$name" 2>&1)
|
|
echo " output: $output"
|
|
|
|
local backend
|
|
backend=$(get_backend "$name")
|
|
if [ "$backend" = "none" ]; then
|
|
pass "detected backend: none (correct fallback)"
|
|
else
|
|
fail "expected none, got: $backend"
|
|
fi
|
|
|
|
# Verify it printed the warning
|
|
if echo "$output" | grep -q "No supported DNS resolver"; then
|
|
pass "printed manual instructions warning"
|
|
else
|
|
fail "missing manual instructions warning"
|
|
fi
|
|
|
|
run_teardown "$name" >/dev/null 2>&1
|
|
check_removed "$name" /run/fips/dns-backend \
|
|
"teardown cleaned state file" \
|
|
"state file still exists after teardown"
|
|
|
|
cleanup_container "$name"
|
|
}
|
|
|
|
# ─────────────────────────────────────────────────────────────────────
|
|
# End-to-end scenarios — run a real fips + fips-gateway, configure
|
|
# DNS via the script, dig through systemd-resolved.
|
|
#
|
|
# Parameterized across Debian 12/13 and Ubuntu 22/24/26. The fips
|
|
# and fips-gateway binaries come from the package once per run (see
|
|
# prepare_binaries) and are copied into each per-distro runtime image.
|
|
# ─────────────────────────────────────────────────────────────────────
|
|
|
|
# Print a fips-gateway log from the container with terminal colour codes
|
|
# removed, so structured fields can be matched as plain "key=value" text.
|
|
# Fails when the log cannot be read.
|
|
read_gateway_log() {
|
|
local name="$1" log="$2"
|
|
local text
|
|
text=$(docker exec "$name" cat "$log" 2>/dev/null) || return 1
|
|
printf '%s\n' "$text" | sed 's/\x1b\[[0-9;]*m//g'
|
|
return 0
|
|
}
|
|
|
|
# The gateway on its default config binds [::1]:5365 and gets past the
|
|
# bind to the NAT step, logging one of the two NAT lines whichever way NAT
|
|
# goes in this container. Those are the lines the held-port check requires
|
|
# to be absent, so this shows the gateway still emits them in that text.
|
|
check_gateway_default_bind() {
|
|
local name="$1"
|
|
local log=/var/log/fips-gateway.log
|
|
local text="" read_ok=0 listening=0 nat_step=0 _i
|
|
for _i in $(seq 1 5); do
|
|
if text=$(read_gateway_log "$name" "$log"); then
|
|
read_ok=1
|
|
if printf '%s\n' "$text" | grep -q 'Gateway DNS resolver listening.*addr=\[::1\]:5365'; then
|
|
listening=1
|
|
fi
|
|
if printf '%s\n' "$text" | grep -qE 'Created nftables table|Failed to create nftables table'; then
|
|
nat_step=1
|
|
break
|
|
fi
|
|
fi
|
|
sleep 1
|
|
done
|
|
if [ "$read_ok" = "0" ]; then
|
|
fail "could not read $log, so the gateway's default bind was not observed"
|
|
return
|
|
fi
|
|
if [ "$listening" = "1" ]; then
|
|
pass "fips-gateway listens on its default [::1]:5365"
|
|
else
|
|
fail "fips-gateway did not log listening on [::1]:5365"
|
|
fi
|
|
if [ "$nat_step" = "1" ]; then
|
|
pass "fips-gateway gets past the DNS bind to the NAT step"
|
|
else
|
|
fail "fips-gateway logged neither NAT-step line after the DNS bind"
|
|
fi
|
|
if [ "$listening" = "0" ] || [ "$nat_step" = "0" ]; then
|
|
echo " --- $log ---"
|
|
printf '%s\n' "$text" | tail -20
|
|
fi
|
|
}
|
|
|
|
# The gateway exits at the DNS bind when its listen port is held. The
|
|
# daemon in this container holds [::1]:5354, so a gateway configured to
|
|
# listen there must exit non-zero with the hint naming the daemon, before
|
|
# it creates the address pool or the NAT table. Any build that gets past
|
|
# the bind logs one of the pool or NAT lines below, whichever way NAT goes
|
|
# in this container, so their absence shows the exit came first.
|
|
check_gateway_exits_on_held_port() {
|
|
local name="$1"
|
|
local log=/var/log/fips-gateway-held.log
|
|
local fail_before=$FAIL
|
|
docker exec "$name" bash -c 'cat > /tmp/gateway-held.yaml <<EOF
|
|
node:
|
|
identity:
|
|
persistent: true
|
|
gateway:
|
|
enabled: true
|
|
pool: "fd01::/112"
|
|
lan_interface: "eth0"
|
|
dns:
|
|
listen: "[::1]:5354"
|
|
EOF'
|
|
docker exec "$name" bash -c "timeout 30 /usr/bin/fips-gateway --config /tmp/gateway-held.yaml >$log 2>&1; echo \"EXIT=\$?\" >>$log"
|
|
|
|
local text
|
|
if ! text=$(read_gateway_log "$name" "$log"); then
|
|
fail "could not read $log, so the held-port exit was not observed"
|
|
return
|
|
fi
|
|
local rc
|
|
rc=$(printf '%s\n' "$text" | sed -n 's/^EXIT=//p' | tail -n 1)
|
|
if [ -z "$rc" ]; then
|
|
fail "the held-port gateway run left no exit status in $log"
|
|
elif [ "$rc" = "0" ] || [ "$rc" = "124" ]; then
|
|
fail "fips-gateway on a held DNS port exited $rc (expected non-zero, not the timeout)"
|
|
else
|
|
pass "fips-gateway on a held DNS port exits $rc"
|
|
fi
|
|
if printf '%s\n' "$text" | grep -qF "the fips daemon's own DNS responder listens on 5354"; then
|
|
pass "the bind error names the daemon as the likely holder of 5354"
|
|
else
|
|
fail "the bind error does not carry the 5354 hint"
|
|
fi
|
|
local line
|
|
for line in "Failed to create virtual IP pool" "Failed to create nftables table" "Created nftables table"; do
|
|
if printf '%s\n' "$text" | grep -qF "$line"; then
|
|
fail "fips-gateway reached a step after the DNS bind: '$line'"
|
|
else
|
|
pass "fips-gateway stopped before '$line'"
|
|
fi
|
|
done
|
|
if [ "$FAIL" -gt "$fail_before" ]; then
|
|
echo " --- $log ---"
|
|
printf '%s\n' "$text" | tail -20
|
|
fi
|
|
}
|
|
|
|
# Args: <distro_label> <docker_base_image> <apt_packages>
|
|
# distro_label: short tag for container/image names (e.g. "debian12")
|
|
# docker_base_image: e.g. "debian:12", "ubuntu:26.04"
|
|
# apt_packages: space-separated apt-get install list. Ubuntu 22.04
|
|
# bundles systemd-resolved into systemd, so the package list there
|
|
# is "systemd iproute2 dbus dnsutils libdbus-1-3 procps" (no
|
|
# separate systemd-resolved). Other distros want
|
|
# "systemd systemd-resolved iproute2 dbus dnsutils libdbus-1-3 procps".
|
|
_run_e2e_scenario() {
|
|
local distro_label="$1"
|
|
local base_image="$2"
|
|
local apt_packages="$3"
|
|
|
|
local name="fips-dns-test-e2e-${distro_label}${FIPS_CI_NAME_SUFFIX:-}"
|
|
local image="fips-dns-test:e2e-${distro_label}"
|
|
log "End-to-end: ${base_image} + systemd-resolved + real fips + fips-gateway + dig"
|
|
|
|
prepare_binaries || { fail "could not prepare the fips binaries"; return; }
|
|
|
|
if [ ! -x "$FIPS_BIN_CACHE" ] || [ ! -x "$FIPS_GATEWAY_BIN_CACHE" ]; then
|
|
fail "binaries not available at $CACHE_DIR"
|
|
return
|
|
fi
|
|
|
|
log "Building e2e runtime image (${base_image})"
|
|
cp "$FIPS_BIN_CACHE" "$CACHE_DIR/fips-bin-for-image"
|
|
cp "$FIPS_GATEWAY_BIN_CACHE" "$CACHE_DIR/fips-gateway-bin-for-image"
|
|
build_image "$image" "$(cat <<DOCKERFILE
|
|
FROM ${base_image}
|
|
ENV DEBIAN_FRONTEND=noninteractive
|
|
RUN apt-get update && apt-get install -y --no-install-recommends \\
|
|
${apt_packages} && \\
|
|
apt-get clean && rm -rf /var/lib/apt/lists/* && \\
|
|
systemctl enable systemd-resolved && \\
|
|
mkdir -p /etc/fips
|
|
COPY testing/dns-resolver/.cache/fips-bin-for-image /usr/bin/fips
|
|
COPY testing/dns-resolver/.cache/fips-gateway-bin-for-image /usr/bin/fips-gateway
|
|
RUN chmod +x /usr/bin/fips /usr/bin/fips-gateway
|
|
CMD ["/lib/systemd/systemd"]
|
|
DOCKERFILE
|
|
)" || { fail "runtime build failed"; rm -f "$CACHE_DIR/fips-bin-for-image" "$CACHE_DIR/fips-gateway-bin-for-image"; return; }
|
|
rm -f "$CACHE_DIR/fips-bin-for-image" "$CACHE_DIR/fips-gateway-bin-for-image"
|
|
|
|
start_systemd_container_with_tun "$name" "$image"
|
|
wait_for_systemd "$name"
|
|
|
|
# Write a minimal fips.yaml that exercises the new defaults.
|
|
# tun.enabled: true so the daemon creates fips0 itself; identity
|
|
# persistent so /etc/fips/fips.pub gives us a stable npub to query.
|
|
# A UDP transport is configured so at least one transport comes up:
|
|
# a node with zero operational transports is Failed and refuses to
|
|
# start. This test exercises the .fips DNS responder, not mesh
|
|
# connectivity, so any bound transport suffices.
|
|
docker exec "$name" bash -c 'cat > /etc/fips/fips.yaml <<EOF
|
|
node:
|
|
identity:
|
|
persistent: true
|
|
log_level: debug
|
|
transports:
|
|
udp:
|
|
bind_addr: "0.0.0.0:2121"
|
|
tun:
|
|
enabled: true
|
|
name: fips0
|
|
dns:
|
|
enabled: true
|
|
port: 5354
|
|
EOF'
|
|
|
|
# Start fips in the background.
|
|
log "Starting fips in container"
|
|
docker exec -d "$name" bash -c '/usr/bin/fips --config /etc/fips/fips.yaml >/var/log/fips.log 2>&1'
|
|
|
|
# Wait for the DNS responder to bind.
|
|
local ready=0
|
|
for _i in $(seq 1 "$DAEMON_TIMEOUT"); do
|
|
if docker exec "$name" ss -uln 2>/dev/null | grep -q ':5354'; then
|
|
ready=1
|
|
break
|
|
fi
|
|
sleep 1
|
|
done
|
|
if [ "$ready" = "1" ]; then
|
|
pass "fips DNS listener up on port 5354"
|
|
else
|
|
fail "fips DNS listener did not appear within ${DAEMON_TIMEOUT}s"
|
|
echo " --- fips log ---"
|
|
docker exec "$name" tail -30 /var/log/fips.log 2>&1 || true
|
|
echo " --- ss -uln ---"
|
|
docker exec "$name" ss -ulnp 2>&1 || true
|
|
cleanup_container "$name"
|
|
return
|
|
fi
|
|
|
|
# Confirm the daemon picked up the new ::1 default bind. Strip
|
|
# ANSI color codes from the log line before matching since the
|
|
# tracing-subscriber default formatter wraps fields in escape codes.
|
|
local bind_line
|
|
bind_line=$(docker exec "$name" grep -m1 "DNS responder started" /var/log/fips.log 2>/dev/null \
|
|
| sed -r 's/\x1b\[[0-9;]*m//g' || echo "")
|
|
echo " daemon log: $bind_line"
|
|
if echo "$bind_line" | grep -qE "bind=\[?::1\]?:5354"; then
|
|
pass "daemon bound on [::1]:5354 (new default)"
|
|
else
|
|
fail "daemon bind line missing or wrong: $bind_line"
|
|
fi
|
|
|
|
# Run setup.
|
|
local output
|
|
output=$(run_setup "$name" 2>&1)
|
|
echo " setup output: $output"
|
|
|
|
# Pick expected backend based on systemd version: dns-delegate
|
|
# on >= 258, global-drop-in otherwise. Either way the backend
|
|
# must target [::1]:5354 for the daemon to receive queries.
|
|
local ver
|
|
ver=$(container_systemd_version "$name")
|
|
local expected_backend
|
|
if [ -n "$ver" ] && [ "$ver" -ge 258 ]; then
|
|
expected_backend="dns-delegate"
|
|
else
|
|
expected_backend="global-drop-in"
|
|
fi
|
|
local backend
|
|
backend=$(get_backend "$name")
|
|
if [ "$backend" = "$expected_backend" ]; then
|
|
pass "setup picked $expected_backend backend (systemd $ver)"
|
|
else
|
|
fail "expected $expected_backend (systemd $ver), got: $backend"
|
|
fi
|
|
|
|
# Wait briefly for systemd-resolved to apply the new config.
|
|
sleep 2
|
|
|
|
# Pull the daemon's npub from the persistent identity file.
|
|
local npub
|
|
npub=$(docker exec "$name" cat /etc/fips/fips.pub 2>/dev/null | tr -d '[:space:]')
|
|
if [ -z "$npub" ]; then
|
|
fail "no /etc/fips/fips.pub after daemon start"
|
|
echo " --- /etc/fips ---"
|
|
docker exec "$name" ls -la /etc/fips/ 2>&1 || true
|
|
cleanup_container "$name"
|
|
return
|
|
fi
|
|
echo " daemon npub: $npub"
|
|
|
|
# Direct dig to the daemon's loopback bind — must succeed.
|
|
local direct_output
|
|
direct_output=$(docker exec "$name" dig +tries=1 +time=3 @::1 -p 5354 AAAA "${npub}.fips" 2>&1)
|
|
if echo "$direct_output" | grep -qE '^[a-zA-Z0-9].*\sAAAA\s+[0-9a-f:]+'; then
|
|
pass "direct dig @::1#5354 returns AAAA"
|
|
else
|
|
fail "direct dig @::1#5354 did not return AAAA"
|
|
echo " --- dig output ---"
|
|
echo "$direct_output" | tail -15
|
|
fi
|
|
|
|
# End-to-end via systemd-resolved stub.
|
|
local stub_output
|
|
stub_output=$(docker exec "$name" dig +tries=1 +time=3 @127.0.0.53 AAAA "${npub}.fips" 2>&1)
|
|
if echo "$stub_output" | grep -qE '^[a-zA-Z0-9].*\sAAAA\s+[0-9a-f:]+'; then
|
|
pass "end-to-end dig @127.0.0.53 returns AAAA (the bug fix)"
|
|
else
|
|
fail "end-to-end dig @127.0.0.53 did not return AAAA"
|
|
echo " --- dig output ---"
|
|
echo "$stub_output" | tail -15
|
|
echo " --- resolved status ---"
|
|
docker exec "$name" resolvectl status 2>&1 | tail -20 || true
|
|
echo " --- daemon log tail ---"
|
|
docker exec "$name" tail -30 /var/log/fips.log 2>&1 || true
|
|
fi
|
|
|
|
# Verify fips-gateway's DNS upstream reachability check passes
|
|
# against the daemon's new ::1 default. This locks the regression
|
|
# class where the gateway default (was 127.0.0.1:5354) and the
|
|
# daemon default (now [::1]:5354) drift apart on Linux IPv6
|
|
# sockets that don't accept v4-mapped traffic.
|
|
docker exec "$name" bash -c 'cat > /tmp/gateway-test.yaml <<EOF
|
|
node:
|
|
identity:
|
|
persistent: true
|
|
gateway:
|
|
enabled: true
|
|
pool: "fd01::/112"
|
|
lan_interface: "eth0"
|
|
EOF'
|
|
# fips-gateway checks IPv6 forwarding before the DNS upstream
|
|
# reachability check; the container is started with forwarding on
|
|
# (see start_systemd_container_with_tun) so we get to the check we
|
|
# actually want to test.
|
|
docker exec -d "$name" bash -c '/usr/bin/fips-gateway --config /tmp/gateway-test.yaml >/var/log/fips-gateway.log 2>&1 || true'
|
|
|
|
# Wait briefly for the upstream-reachability log line to appear
|
|
# one way or the other.
|
|
local gw_ok=0
|
|
for _i in $(seq 1 5); do
|
|
if docker exec "$name" grep -q "DNS upstream is reachable" /var/log/fips-gateway.log 2>/dev/null; then
|
|
gw_ok=1
|
|
break
|
|
fi
|
|
if docker exec "$name" grep -qE "DNS upstream did not respond|Failed to send DNS probe|DNS upstream recv failed" /var/log/fips-gateway.log 2>/dev/null; then
|
|
break
|
|
fi
|
|
sleep 1
|
|
done
|
|
if [ "$gw_ok" = "1" ]; then
|
|
pass "fips-gateway reaches DNS upstream at [::1]:5354 (gateway/daemon default parity)"
|
|
else
|
|
fail "fips-gateway DNS upstream check failed — defaults drifted?"
|
|
echo " --- fips-gateway log ---"
|
|
docker exec "$name" tail -20 /var/log/fips-gateway.log 2>&1 || true
|
|
fi
|
|
check_gateway_default_bind "$name"
|
|
|
|
# Stop the gateway (it may have failed after the DNS bind on something
|
|
# unrelated in this minimal container).
|
|
docker exec "$name" pkill -f fips-gateway 2>/dev/null || true
|
|
|
|
check_gateway_exits_on_held_port "$name"
|
|
|
|
# Teardown via the script: backend config file must be removed
|
|
# (path varies by backend selected above).
|
|
local teardown_path
|
|
if [ "$expected_backend" = "dns-delegate" ]; then
|
|
teardown_path="/etc/systemd/dns-delegate.d/fips.dns-delegate"
|
|
else
|
|
teardown_path="/etc/systemd/resolved.conf.d/fips.conf"
|
|
fi
|
|
run_teardown "$name" >/dev/null 2>&1
|
|
check_removed "$name" "$teardown_path" \
|
|
"teardown removed $expected_backend config at $teardown_path" \
|
|
"$expected_backend config still present after teardown at $teardown_path"
|
|
|
|
cleanup_container "$name"
|
|
}
|
|
|
|
# Per-distro wrappers
|
|
_pkgs_with_resolved="systemd systemd-resolved iproute2 dbus dnsutils libdbus-1-3 procps"
|
|
_pkgs_ubuntu22="systemd iproute2 dbus dnsutils libdbus-1-3 procps"
|
|
|
|
test_e2e_debian12() { _run_e2e_scenario debian12 debian:12 "$_pkgs_with_resolved"; }
|
|
test_e2e_debian13() { _run_e2e_scenario debian13 debian:trixie "$_pkgs_with_resolved"; }
|
|
test_e2e_ubuntu22() { _run_e2e_scenario ubuntu22 ubuntu:22.04 "$_pkgs_ubuntu22"; }
|
|
test_e2e_ubuntu24() { _run_e2e_scenario ubuntu24 ubuntu:24.04 "$_pkgs_with_resolved"; }
|
|
test_e2e_ubuntu26() { _run_e2e_scenario ubuntu26 ubuntu:26.04 "$_pkgs_with_resolved"; }
|
|
|
|
# ─────────────────────────────────────────────────────────────────────
|
|
# Main
|
|
# ─────────────────────────────────────────────────────────────────────
|
|
|
|
ALL_SCENARIOS="debian12-resolved debian13-resolved ubuntu22-resolved ubuntu24-resolved ubuntu26-resolved dnsmasq nm-dnsmasq no-resolver e2e-debian12 e2e-debian13 e2e-ubuntu22 e2e-ubuntu24 e2e-ubuntu26"
|
|
|
|
# A missing package is refused here, before any scenario runs, rather
|
|
# than surfacing as a failure of the first e2e scenario.
|
|
_args=()
|
|
while [ $# -gt 0 ]; do
|
|
case "$1" in
|
|
--deb)
|
|
SUPPLIED_DEB="${2:?--deb requires a path}"
|
|
if [ ! -f "$SUPPLIED_DEB" ]; then
|
|
echo "--deb $SUPPLIED_DEB does not exist" >&2
|
|
exit 2
|
|
fi
|
|
shift 2
|
|
;;
|
|
-h|--help)
|
|
echo "usage: test.sh [--deb PATH] [scenario ...]"
|
|
echo "scenarios: $ALL_SCENARIOS"
|
|
exit 0
|
|
;;
|
|
-*)
|
|
echo "Unknown option: $1" >&2
|
|
exit 1
|
|
;;
|
|
*)
|
|
_args+=("$1")
|
|
shift
|
|
;;
|
|
esac
|
|
done
|
|
set -- ${_args[@]+"${_args[@]}"}
|
|
|
|
if [ $# -eq 0 ]; then
|
|
scenarios="$ALL_SCENARIOS"
|
|
else
|
|
scenarios="$*"
|
|
fi
|
|
|
|
for scenario in $scenarios; do
|
|
case "$scenario" in
|
|
debian12-resolved) test_debian12_resolved ;;
|
|
debian13-resolved) test_debian13_resolved ;;
|
|
ubuntu22-resolved) test_ubuntu22_resolved ;;
|
|
ubuntu24-resolved) test_ubuntu24_resolved ;;
|
|
ubuntu26-resolved) test_ubuntu26_resolved ;;
|
|
dnsmasq) test_dnsmasq ;;
|
|
nm-dnsmasq) test_nm_dnsmasq ;;
|
|
no-resolver) test_no_resolver ;;
|
|
e2e-debian12) test_e2e_debian12 ;;
|
|
e2e-debian13) test_e2e_debian13 ;;
|
|
e2e-ubuntu22) test_e2e_ubuntu22 ;;
|
|
e2e-ubuntu24) test_e2e_ubuntu24 ;;
|
|
e2e-ubuntu26) test_e2e_ubuntu26 ;;
|
|
*)
|
|
echo "Unknown scenario: $scenario"
|
|
echo "Available: $ALL_SCENARIOS"
|
|
exit 1
|
|
;;
|
|
esac
|
|
echo
|
|
done
|
|
|
|
echo "═══════════════════════════════════════"
|
|
echo "Results: $PASS passed, $FAIL failed, $SKIP skipped"
|
|
echo "═══════════════════════════════════════"
|
|
|
|
[ "$FAIL" -eq 0 ]
|