Johnathan Corgan
a5a05e5024
The native-api suite failed on the internal builder while passing on GitHub, at the same commit and with the same test script. Two of its three failing assertions read as defects in the daemon and are not. A bind-mount source is resolved by the Docker daemon in the host's mount namespace, never in the caller's. The CI worker unit sets systemd's PrivateTmp=, so its /tmp is its own, and a path from `mktemp -d` exists only inside the unit. The daemon finds nothing there and creates an empty directory at the same path on the host instead. Everything downstream follows from that: a socket the container binds lands in a directory this script cannot see, so the check reports "socket never appeared" while the daemon under test logs the bind eighteen lines below it; and a file mount such as fips.yaml arrives as a directory, so the node exits with "Is a directory (os error 21)" and the check reports that the two nodes did not start. Reproduced directly, since a private /tmp needs privileges this host does not grant unprivileged: `docker run -v /tmp/absent/fips.yaml:/etc/fips/fips.yaml` against a path that does not exist leaves root-owned directories on the host and makes the container read the config as a directory, which is the CI log's error verbatim. Twelve such directories from the failing runs were still in /tmp, root-owned and timestamped to the native-api stage, when this was traced. Give the harness a per-run temporary root inside the worktree and route every bind-mount source through it. The worktree is the same path in both namespaces, which is the property that matters and the one /tmp does not have. /target is already ignored, and the pid in the path keeps the two trunk runs on the builder out of each other's way. Seven directories move: the single-node socket directory, the gated and API-off directories, and the two socket and two config directories of the two-node check. The build context and the log files stay on `mktemp`, because the daemon resolves neither, and the comment on the helper says which is which so the distinction does not have to be rediscovered. This is why the suite is the only one affected: it is the only one under testing/ that bind-mounts a `mktemp` path at all. Every other script there uses mktemp for host-side scratch only. Worth naming rather than leaving to be found: the third assertion, "No socket appears when the API is not enabled", passed throughout. It asserts an absence, and a mount that goes to the wrong place produces an absence too, so in that environment it could not have failed. It passes here for the right reason now. Verified by running the suite on this host: 28 passed, 0 failed, and the exit trap left no directory behind. That run had an ordinary shared /tmp, so it shows the change breaks nothing; the builder's private /tmp is what the next gate run exercises. No changelog entry: nothing here changes what the release ships.
FIPS Testing
Integration and simulation test harnesses for FIPS, using Docker containers running the full protocol stack.
Test Harnesses
static/ -- Static Docker Network
Fixed topologies with manual scripts for building, config generation, connectivity tests (ping, iperf), and network impairment (netem). Useful for deterministic debugging and validating specific topology configurations.
| Topology | Nodes | Transport | Description |
|---|---|---|---|
| mesh | 5 | UDP | Sparse mesh, 6 links, multi-hop |
| chain | 5 | UDP | Linear chain, max 4-hop paths |
| rekey | 5 | UDP | Rekey integration test topology |
tor/ -- Tor Transport Integration
End-to-end Tor transport testing with Docker containers running real Tor daemons. Requires internet access for Tor bootstrapping.
| Scenario | Description |
|---|---|
| socks5-outbound | Outbound SOCKS5 connections through Tor to clearnet peer |
| directory-mode | Inbound via HiddenServiceDir onion service (co-located) |
nat/ -- NAT Traversal Lab
Real Docker NAT traversal tests for the Nostr/STUN bootstrap path,
using router containers with iptables-based NAT, a local Nostr relay,
and a local STUN responder.
| Scenario | Description |
|---|---|
| cone | Two NATed peers establish a UDP traversal path |
| symmetric | UDP traversal fails under symmetric NAT, TCP fallback wins |
| lan | Peers on the same LAN prefer local addresses over reflexive |
chaos/ -- Stochastic Simulation
Automated network testing with configurable node counts, topology algorithms (random geometric, Erdos-Renyi, chain, explicit), and fault injection (netem mutation, link flaps, traffic generation, node churn). 20 scenarios covering general stress testing, cost-based parent selection, mixed link technologies (fiber/Bluetooth/WiFi), transport-specific validation (UDP, TCP, Ethernet), and ECN/congestion testing. Scenarios are defined in YAML and executed via a Python harness that manages the full lifecycle: topology generation, Docker orchestration, fault scheduling, log collection, and analysis.
interop/ -- Mixed-Version Interop Harness
On-demand harness that runs an N-node full mesh from a node-spec where
each node can run a different build of the FIPS daemon, then attributes
every FMP/FSP/rekey/connectivity failure to a specific version pair
(same-version vs MIXED). Used to catch interop regressions between
builds, not as a per-commit CI gate; not part of ci-local.sh.
mesh-lab/ -- Mesh Reliability Lab
On-demand harness that runs a chosen integration suite N times under a
configurable host-pressure profile (idle / light / github-runner-
equivalent / heavy via stress-ng), per-container netem impairment,
and optional trace-level RUST_LOG, capturing per-rep diagnostics and a
mechanism-match summary across the run. Used for statistical reliability
characterization of known flake classes under calibrated stress, not as
a per-commit gate; not part of ci-local.sh.
Running CI locally (ci-local.sh)
ci-local.sh runs the full local CI pipeline — build,
clippy, unit tests, and the integration suites (including the chaos
scenarios) — mirroring the GitHub ci.yml integration matrix. Run
./ci-local.sh --help for the full option list and --list for the
available suites. Every run starts with a parity check that verifies the
local suite set covers the same work as the GitHub matrix, per scenario for
chaos and per distro for deb-install; a divergence fails the run. GitHub
runs the same check as its own ci-parity job. --check-parity runs it
alone (see check-ci-parity.sh).
Per-run isolation and the FIPS_CI_RUN_ID override
Every invocation derives a run id and scopes all of its Docker resources to it, so two simultaneous runs on the same host (for example, one per git worktree, or an operator testing by hand while CI is in flight) never collide:
- Compose projects are named
fipsci_<run-id>_<suite>, so container, network, and volume names are all prefixed per run. - Build images are tagged
fips-test:<run-id>andfips-test-app:<run-id>, exported asFIPS_TEST_IMAGE/FIPS_TEST_APP_IMAGE, and every compose file and suite script reads those. The run does not writefips-test:latestat all: a bridge back to that shared mutable name would let a consumer that had been missed keep working while resolving whichever concurrent run wrote the tag last.:lateststays the hand-build name, produced bytesting/scripts/build.sh, and remains the default every consumer falls back to when the variables are unset. - The build context is a per-run copy at
testing/docker-<run-id>/, exported asFIPS_BUILD_CONTEXT. It is absolute because compose resolves a relative build context against the compose file's own directory rather than the working directory.testing/docker/is the hand-run context and a CI run does not write to it. Without this, two runs race on the contents of one directory and either can build a correctly-per-run-tagged image from the other's binaries. - Each parallel chaos child gets a unique, non-overlapping
/24in10.30.x(via the sim--subnetoverride).10.30.xsits outside Docker's default address pool and the fixed-subnet suites'172.xranges, so neither a sibling chaos child nor an auto-assigned network can swallow a pinned subnet.
By default the run id is <short-git-sha>-<random> — the SHA portion
records what code a container is testing, the random suffix keeps
simultaneous runs of the same SHA disjoint. Override it for a
reproducible, attach-by-name debug session:
FIPS_CI_RUN_ID=mydebug ./ci-local.sh --only static-mesh
# containers are named fipsci_mydebug_static_fips-node-a, etc.
Preemption-safety and exit codes
ci-local.sh is safe to cancel mid-run. A signal trap tears down every
compose project the run started (not just the current suite) and reaps
any in-flight parallel chaos children, bounded by a timeout so a stuck
compose down cannot wedge the trap. Exit codes distinguish a cancelled
run from a failing one:
| Code | Meaning |
|---|---|
0 |
all stages passed |
1 |
one or more stages failed |
130 |
interrupted by SIGINT — cancelled, not a failure |
143 |
terminated by SIGTERM — cancelled, not a failure |
A preempting CI worker (the push-triggered, CI-gated build pipeline that
kills an in-flight run when a newer same-branch tip arrives) maps
130/143 → cancelled (discard, do not record a failing commit), 0
→ green, any other non-zero → red.
Cleaning up leftover resources
Every CI-created container, network, and volume carries the label
com.corganlabs.fips-ci=1. If a run is hard-killed (SIGKILL, OOM, crash)
and leaves resources behind, reap them with:
./ci-local.sh --reap # or: ./ci-cleanup.sh
ci-cleanup.sh force-removes everything bearing the CI
label or a fipsci_ compose-project prefix; it is safe to run when there
is nothing to reap and safe to run repeatedly. Pass --project-prefix to
scope the sweep to a single run.
It also removes the chaos simulation's leftover host-namespace veth
interfaces (vh…a/vh…b), the one resource it touches that is neither a
docker object nor labelled — a host interface can carry neither a label
nor a compose project, so it is matched by name shape alone. That makes
the reach here asymmetric with everything above, and worth stating
plainly:
- A bare
chaos.shrun's containers survive a broad reap. Its compose project is notfipsci_, and the simulation labels only the network, not the services. - A bare
chaos.shrun's veth interfaces do not. An unscoped reap deletes them while they are in use, severing the Ethernet links of a live simulation and leaving its containers running.
So do not run a broad --reap while a bare simulation is up. Scope the
interface sweep with --veth-suffixes (which is what ci-local.sh's own
teardown passes) or wait for the simulation to finish. --project-prefix
does not help here: it scopes only the compose-project sweep.