fips/packaging

FIPS Packaging

This directory contains packaging for all supported target platforms. Most build outputs go to deploy/ at the project root; make ipk and make apk write to dist/ instead.

Quick Start

make deb        # Debian/Ubuntu .deb (built in the pinned container)
make tarball    # systemd install tarball
make ipk        # OpenWrt .ipk (opkg, OpenWrt 24.x and earlier)
make apk        # OpenWrt .apk (apk-tools, mandatory on OpenWrt 25+)
make aur        # Arch Linux AUR package (fips-git, local build + namcap)
make pkg        # macOS .pkg installer
make freebsd    # FreeBSD .pkg package (on FreeBSD; use gmake)
make zip        # Windows .zip package
make all        # deb + tarball (default)

The two Debian build paths

make deb builds in a container pinned to the oldest supported distribution, named with the glibc floor in build-floor.env, and checks the package it produced against that floor before handing it back. Its only host prerequisite is docker: the toolchain and the build dependencies live in the image. This is the path the release workflow, the integration suite and the internal builder all take, so a package that passes locally is built the way the shipped one is.

make deb-host is the old path. It builds on the host, at whatever glibc the host has, and it is checked against nothing. Use it for local iteration only. A package built on a current distribution records a version dependency that the loader refuses on Debian 12 and Ubuntu 22.04, which is what shipped in every Linux artifact from v0.3.0 through v0.5.0, so it must not produce anything anyone else installs.

Build Prerequisites

The prerequisites below apply to the host-build targets. make deb needs docker and nothing else.

These targets build FIPS from source, so the host needs a build environment in addition to a Rust toolchain (the version pinned in rust-toolchain.toml is auto-installed by rustup).

On Linux, libclang is required: the LAN gateway's nftables bindings are generated by bindgen at build time, which needs libclang.so on the build host. Without it the build fails inside the rustables crate with an "Unable to find libclang" error.

sudo apt install libclang-dev    # Debian / Ubuntu

This is a build-time prerequisite only — it is not a runtime dependency, so hosts installing a pre-built .deb do not need it.

BLE is not optional, and it is not universal either. build.rs sets ble_available for glibc Linux or Android, which is the set of platforms with a concrete backend: the transport is absent from musl Linux, macOS, FreeBSD and Windows builds entirely. On glibc Linux libdbus-1-dev and pkg-config are hard build prerequisites: there is no probe that skips BLE when they are missing. The BlueZ daemon is a runtime dependency and is not needed to build.

Directory Structure

packaging/
  aur/            Arch Linux AUR packaging (PKGBUILD, supporting files)
  common/         Shared assets (default config, hosts file)
  debian/         Debian/Ubuntu .deb packaging via cargo-deb
  freebsd/        FreeBSD .pkg packaging via pkg-create(8)
  macos/          macOS .pkg installer via pkgbuild
  nixos/          NixOS flake module (services.fips.*)
  systemd/        Generic Linux systemd tarball packaging
  openwrt-ipk/    OpenWrt .ipk packaging via cargo-zigbuild (opkg)
  openwrt-apk/    OpenWrt .apk packaging via cargo-zigbuild + apk mkpkg
  windows/        Windows .zip package with service scripts

Formats

Debian/Ubuntu (.deb)

Built with cargo-deb. Installs fips, fipsctl, fipstop, and fips-gateway to /usr/bin/, ships the fips, fips-dns, fips-firewall, and fips-gateway systemd units, and enables the fips and fips-dns services.

The default configuration ships as an example at /usr/share/fips/fips.yaml.example and is not a dpkg conf-file. (It is deliberately not under /usr/share/doc, which minimal and container installs path-exclude, since the postinst reads it at install time.) On install, postinst seeds /etc/fips/fips.yaml (mode 600) from the example only if it does not already exist, so a configuration that was rendered by configuration management or edited by an operator is never prompted for or clobbered on upgrade. To reset to defaults, remove /etc/fips/fips.yaml and reinstall, or copy the example back manually.

# Build
make deb

# Install
sudo dpkg -i deploy/fips_<version>_<arch>.deb

# Remove (preserves config and keys)
sudo dpkg -r fips

# Purge (removes config and identity keys)
sudo dpkg -P fips

systemd Tarball

A self-contained tarball with binaries and an install.sh script for any systemd-based Linux distribution.

# Build
make tarball

# Install (on target host)
tar -xzf deploy/fips-<version>-linux-<arch>.tar.gz
sudo ./fips-<version>-linux-<arch>/install.sh

See systemd/README.install.md for full installation and configuration instructions.

OpenWrt (.ipk, opkg — OpenWrt 24.x and earlier)

Cross-compiled with cargo-zigbuild and assembled as a standard .ipk archive. Supports aarch64, mipsel, mips, arm, and x86_64 targets.

# Build (default: aarch64)
make ipk

# Build for a specific architecture
bash packaging/openwrt-ipk/build-ipk.sh --arch mipsel

See openwrt-ipk/README.md for router-specific installation instructions.

OpenWrt (.apk, apk-tools — mandatory on OpenWrt 25+)

OpenWrt 25 makes apk-tools the mandatory package manager (it is opt-in on 24.10). Same SDK-free approach (cargo-zigbuild), but the .apk container is assembled by apk mkpkg rather than hand-rolled, so the build additionally needs an apk-tools v3 apk binary built from source. The installed-filesystem payload is shared with the .ipk package.

# Build (default: aarch64; also x86_64)
make apk

# Build for a specific architecture
bash packaging/openwrt-apk/build-apk.sh --arch x86_64

Packages are unsigned; install with apk add --allow-untrusted. See openwrt-apk/README.md for building apk-tools and router-specific installation.

macOS (.pkg)

Built with pkgbuild (included with Xcode command-line tools). Installs binaries to /usr/local/bin/, config to /usr/local/etc/fips/, sets up the /etc/resolver/fips DNS resolver for .fips domains, and loads a launchd daemon. The TUN device is named utun<N> (kernel-assigned) rather than fips0.

# Build
make pkg

# Install
sudo installer -pkg deploy/fips-<version>-macos-<arch>.pkg -target /

# Remove
sudo packaging/macos/uninstall.sh

FreeBSD (.pkg)

Built natively on a FreeBSD host with pkg create. Ships fips, fipsctl, and fipstop (fips-gateway is excluded — its NAT backend is nftables, Linux-only), rc.d services, and .fips DNS integration for local_unbound, unbound, or dnsmasq. Config installs sample-style under /usr/local/etc/fips/ (edits survive upgrades).

# Build (on FreeBSD; this Makefile needs GNU make — pkg install gmake)
gmake freebsd
# or directly, no gmake needed:
./packaging/freebsd/build-pkg.sh

# Install
pkg add ./deploy/fips-<version>-freebsd-<arch>.pkg
sysrc fips_enable=YES fips_dns_enable=YES
service fips start
service fips_dns start

See freebsd/README.md for host resolver setup and field-tested caveats.

Windows (.zip)

A ZIP archive containing binaries, default config, and PowerShell service helper scripts. Requires the wintun driver for TUN support.

# Build
make zip

# Or directly
powershell -File packaging/windows/build-zip.ps1

# Extract and install as service (requires Administrator)
Expand-Archive deploy\fips-<version>-windows-x86_64.zip -DestinationPath fips
cd fips
powershell -File install-service.ps1

# Uninstall (preserves config)
powershell -File uninstall-service.ps1

# Uninstall and remove config
powershell -File uninstall-service.ps1 -RemoveAll

Arch Linux (AUR)

Two AUR packages are maintained: fips (release, builds from tagged tarball) and fips-git (development, builds from latest git master).

# Build and validate locally (git variant)
make aur

# Install from AUR
yay -S fips-git    # development build from master
yay -S fips        # release build from latest tag

See aur/README.md for AUR publication instructions and maintainer guide.

Nix / NixOS (flake)

A flake at the project root builds all four binaries (fips, fipsctl, fips-gateway, fipstop) from source. It pins the exact toolchain from rust-toolchain.toml via fenix and wires up the build-time native dependencies (libclang for bindgen, plus dbus and pkg-config for BLE), so it needs no system setup beyond Nix with flakes enabled.

nix build .#fips          # build the package (all four binaries)
nix run .#fips -- --help  # run a binary directly
nix run .#fipsctl -- show status
nix develop               # dev shell with the pinned toolchain + cargo-edit
nix flake check           # build + validate the flake

The flake also exposes:

• overlays.default — adds pkgs.fips to nixpkgs
• nixosModules.default — a NixOS module (packaging/nixos/) that provides services.fips.enable and runs the daemon as a systemd service

As a package only (no service management):

environment.systemPackages = [ fips.packages.${system}.default ];

As a managed NixOS service (recommended — starts on boot, journalctl logs):

# flake.nix
{
  inputs.fips = {
    url = "github:jmcorgan/fips";
    inputs.nixpkgs.follows = "nixpkgs";
  };

  outputs = { self, nixpkgs, fips, ... }@inputs: {
    nixosConfigurations.myhost = nixpkgs.lib.nixosSystem {
      system = "x86_64-linux";
      specialArgs = { inherit inputs; };
      modules = [
        ./configuration.nix
        fips.nixosModules.default
        { services.fips.enable = true; }
      ];
    };
  };
}

See packaging/nixos/README.md for the full option reference (services.fips.enable, .package, .configFile, .openFirewall).

Shared Assets

common/ contains assets used across packaging formats:

• fips.yaml — default configuration (ephemeral identity, UDP/TCP/TUN/DNS)
• hosts — static hostname-to-npub mappings for .fips DNS resolution