Johnathan Corgan
1eb0e8a34e
Bringing the TUN device and the .fips DNS responder up and taking them down is host-side work, but the bodies sat inline in the node's supervisor arms, and their handles were eight loose fields on the supervisor. Move the bodies to ipv6tun::lifecycle and gather the handles into one Handles struct there, held by the supervisor. The supervisor arms, their order and the child-exit reporting are unchanged; each arm now calls into ipv6tun. The TUN start is two calls so the node can refresh its MSS ceiling between them, exactly where it did before: open_tun creates and logs the device, then spawn_tun creates the macOS/FreeBSD shutdown pipe and starts the writer and reader threads. A failure to create the device still continues without a TUN, and a pipe or writer failure still fails the node's start. stop_tun and stop_dns carry the teardown unchanged, including the shutdown-pipe write that wakes the reader on macOS and FreeBSD. The TUN device name moves into Handles as well, so the teardown up-set can ask ipv6tun whether each child is up. A TUN counts as up when it has a device name, not when it has a sender, so an app-owned TUN still produces no TUN teardown; DNS counts as up while its task handle exists. Node::tun_name, tun_tx, dns_local_addr and enable_app_owned_tun keep their behaviour and now read or write the handles. Node::mesh_ifindex had no caller left outside a test and is replaced by the same method on Handles. Tests install a TUN sender through a test-only Node::install_tun. The moved log lines now log under fips::ipv6tun::lifecycle instead of fips::node::lifecycle. Add that target to the NAT harness and its trace overlay, and to the harnesses that relied on fips::node=debug, and note the rename in the changelog.
FIPS Testing
Integration and simulation test harnesses for FIPS, using Docker containers running the full protocol stack.
Test Harnesses
static/ -- Static Docker Network
Fixed topologies with manual scripts for building, config generation, connectivity tests (ping, iperf), and network impairment (netem). Useful for deterministic debugging and validating specific topology configurations.
| Topology | Nodes | Transport | Description |
|---|---|---|---|
| mesh | 5 | UDP | Sparse mesh, 6 links, multi-hop |
| chain | 5 | UDP | Linear chain, max 4-hop paths |
| rekey | 5 | UDP | Rekey integration test topology |
tor/ -- Tor Transport Integration
End-to-end Tor transport testing with Docker containers running real Tor daemons. Requires internet access for Tor bootstrapping.
| Scenario | Description |
|---|---|
| socks5-outbound | Outbound SOCKS5 connections through Tor to clearnet peer |
| directory-mode | Inbound via HiddenServiceDir onion service (co-located) |
nat/ -- NAT Traversal Lab
Real Docker NAT traversal tests for the Nostr/STUN bootstrap path,
using router containers with iptables-based NAT, a local Nostr relay,
and a local STUN responder.
| Scenario | Description |
|---|---|
| cone | Two NATed peers establish a UDP traversal path |
| symmetric | UDP traversal fails under symmetric NAT, TCP fallback wins |
| lan | Peers on the same LAN prefer local addresses over reflexive |
chaos/ -- Stochastic Simulation
Automated network testing with configurable node counts, topology algorithms (random geometric, Erdos-Renyi, chain, explicit), and fault injection (netem mutation, link flaps, traffic generation, node churn). 10 scenarios covering general stress and node churn, discovery over sparse topologies, spanning-tree and bloom-propagation regression, transport-specific validation (UDP, TCP, Ethernet), and ECN/congestion testing. Scenarios are defined in YAML and executed via a Python harness that manages the full lifecycle: topology generation, Docker orchestration, fault scheduling, log collection, and analysis.
interop/ -- Mixed-Version Interop Harness
On-demand harness that runs an N-node full mesh from a node-spec where
each node can run a different build of the FIPS daemon, then attributes
every FMP/FSP/rekey/connectivity failure to a specific version pair
(same-version vs MIXED). Used to catch interop regressions between
builds, not as a per-commit CI gate; not part of ci-local.sh.
mesh-lab/ -- Mesh Reliability Lab
On-demand harness that runs a chosen integration suite N times under a
configurable host-pressure profile (idle / light / github-runner-
equivalent / heavy via stress-ng), per-container netem impairment,
and optional trace-level RUST_LOG, capturing per-rep diagnostics and a
mechanism-match summary across the run. Used for statistical reliability
characterization of known flake classes under calibrated stress, not as
a per-commit gate; not part of ci-local.sh.
sidecar/ -- Network Sidecar Isolation
FIPS running as a sidecar container that owns the network namespace of
a companion application container, with iptables/ip6tables rules
confining the app to the mesh. scripts/test-sidecar.sh boots a
three-node chain of such pairs and asserts both connectivity and
isolation.
firewall/ -- nftables Baseline
End-to-end exercise of the production fips0 nftables baseline at
packaging/common/fips.nft, covering the default-deny, conntrack and
drop-in semantics.
iface-binding/ -- Dynamic Interface Binding
Two nodes whose only transports are interface-bound, started before the
interface they name exists. Asserts the boot race (the daemon comes up
Degraded and binds when the interface appears, with no restart), the flap
(down/up in both directions), destroy-and-recreate, that an optional
interface's absence never moves node health, and that absence is logged once
on the edge rather than once per retry.
acl-allowlist/ -- Peer ACL Enforcement
Six nodes with per-node allowlist files mounted at the runtime ACL paths, exercising insiders, outsiders and allowed remotes at once to check which peer pairs are admitted and which are rejected.
native-api/ -- Native Datagram API
Checks the experimental native datagram API: a client process opens a flow to a remote pubkey over a Unix socket, receives a file descriptor, and exchanges datagrams on it with no TUN device and no IPv6 emulation.
medium-change/ -- Transport-Medium Change
A multi-homed node whose default route moves between two live access paths
while mesh traffic is in flight, with the far peer reachable only through a
router so the path to it actually follows that default route. Asserts the
peering survives without a re-handshake (link_id and authenticated_at_ms
unchanged) and that the far side re-pins to the new source address.
Includes a negative control that runs the same move with
node.netmon.enabled: false and requires the outage, so a topology that
has stopped exercising the bug fails rather than passing quietly.
dns-resolver/ -- fips-dns-setup Backends
Runs fips-dns-setup against each supported Linux resolver backend in
systemd containers, verifying backend detection, generated config and
teardown, plus an end-to-end scenario that resolves a .fips name
through the configured backend. The end-to-end scenarios run the
binaries from a Debian package: --deb PATH supplies one, and without
it the suite builds one through packaging/debian/build-deb-container.sh.
deb-install/ -- Debian Package Install
Installs the built .deb in systemd containers for each
target distro and verifies unit enablement, conffile placement and
end-to-end .fips resolution as a user would meet it. GitHub CI also
installs the arm64 package on ubuntu22 on an arm64 runner, a leg the
local run cannot have and the parity check reports as GitHub-only.
boringtun/ -- WireGuard Throughput Baseline
Two userspace WireGuard peers running Cloudflare BoringTun, measured
with iperf3, as a comparison baseline for FIPS tunnel throughput.
ble/ -- BLE L2CAP Spike
Standalone cargo project (ble_spike) that validates the bluer API
assumptions behind the BleIo trait against real adapters on two
machines. Not a Docker harness.
Running CI locally (ci-local.sh)
ci-local.sh runs the full local CI pipeline — build,
clippy, unit tests, and the integration suites (including the chaos
scenarios) — mirroring the GitHub ci.yml integration matrices. Run
./ci-local.sh --help for the full option list and --list for the
available suites. Every run starts with a parity check that verifies the
local suite set covers the same work as the GitHub matrix, per scenario for
chaos and per distro for deb-install, across every job that carries a
matrix; a divergence fails the run. GitHub
runs the same check as its own ci-parity job. --check-parity runs it
alone (see check-ci-parity.sh).
Note that ci-local.sh covers the integration suites and the glibc unit
tests. GitHub additionally runs the library tests on macOS, Windows and
musl (built for the musl target and run natively), and a --features profiling pass; the musl
leg exists because interface presence is built on getifaddrs/ifa_flags,
which musl reimplements independently, and OpenWrt is a musl target. A local
green run does not certify those four.
The Linux and musl legs also create an address-less dummy interface
(fips-probe0) and pass its name to the tests as
FIPS_TEST_ADDRLESS_IFACE. That is the one assumption the interface-binding
mechanism rests on that no ordinary test can reach: loopback has addresses, so
probing it asks whether getifaddrs works rather than whether it reports an
interface that has none — which is exactly what fips-mesh0 and fips-ap0
are on OpenWrt. Set the variable by hand to run the assertion locally against
an interface you have created; leave it unset and the assertion does not run.
Per-run isolation and the FIPS_CI_RUN_ID override
Every invocation derives a run id and scopes all of its Docker resources to it, so two simultaneous runs on the same host (for example, one per git worktree, or an operator testing by hand while CI is in flight) never collide:
- Compose projects are named
fipsci_<run-id>_<suite>, so container, network, and volume names are all prefixed per run. - Build images are tagged
fips-test:<run-id>andfips-test-app:<run-id>, exported asFIPS_TEST_IMAGE/FIPS_TEST_APP_IMAGE, and every compose file and suite script reads those. The run does not writefips-test:latestat all: a bridge back to that shared mutable name would let a consumer that had been missed keep working while resolving whichever concurrent run wrote the tag last.:lateststays the hand-build name, produced bytesting/scripts/build.sh, and remains the default every consumer falls back to when the variables are unset. - The build context is a per-run copy at
testing/docker-<run-id>/, exported asFIPS_BUILD_CONTEXT. It is absolute because compose resolves a relative build context against the compose file's own directory rather than the working directory.testing/docker/is the hand-run context and a CI run does not write to it. Without this, two runs race on the contents of one directory and either can build a correctly-per-run-tagged image from the other's binaries. - Each parallel chaos child gets a unique, non-overlapping
/24in10.30.x(via the sim--subnetoverride).10.30.xsits outside Docker's default address pool and the fixed-subnet suites'172.xranges, so neither a sibling chaos child nor an auto-assigned network can swallow a pinned subnet.
By default the run id is <short-git-sha>-<random> — the SHA portion
records what code a container is testing, the random suffix keeps
simultaneous runs of the same SHA disjoint. Override it for a
reproducible, attach-by-name debug session:
FIPS_CI_RUN_ID=mydebug ./ci-local.sh --only static-mesh
# containers are named fipsci_mydebug_static_fips-node-a, etc.
Preemption-safety and exit codes
ci-local.sh is safe to cancel mid-run. A signal trap tears down every
compose project the run started (not just the current suite) and reaps
any in-flight parallel chaos children, bounded by a timeout so a stuck
compose down cannot wedge the trap. Exit codes distinguish a cancelled
run from a failing one:
| Code | Meaning |
|---|---|
0 |
all stages passed |
1 |
one or more stages failed |
130 |
interrupted by SIGINT — cancelled, not a failure |
143 |
terminated by SIGTERM — cancelled, not a failure |
A preempting CI worker (the push-triggered, CI-gated build pipeline that
kills an in-flight run when a newer same-branch tip arrives) maps
130/143 → cancelled (discard, do not record a failing commit), 0
→ green, any other non-zero → red.
Cleaning up leftover resources
Every CI-created container, network, and volume carries the label
com.corganlabs.fips-ci=1. If a run is hard-killed (SIGKILL, OOM, crash)
and leaves resources behind, reap them with:
./ci-local.sh --reap # or: ./ci-cleanup.sh
ci-cleanup.sh force-removes everything bearing the CI
label or a fipsci_ compose-project prefix; it is safe to run when there
is nothing to reap and safe to run repeatedly. Pass --project-prefix to
scope the sweep to a single run.
It also removes the chaos simulation's leftover host-namespace veth
interfaces (vh…a/vh…b), the one resource it touches that is neither a
docker object nor labelled — a host interface can carry neither a label
nor a compose project, so it is matched by name shape alone. That makes
the reach here asymmetric with everything above, and worth stating
plainly:
- A bare
chaos.shrun's containers survive a broad reap. Its compose project is notfipsci_, and the simulation labels only the network, not the services. - A bare
chaos.shrun's veth interfaces do not. An unscoped reap deletes them while they are in use, severing the Ethernet links of a live simulation and leaving its containers running.
So do not run a broad --reap while a bare simulation is up. Scope the
interface sweep with --veth-suffixes (which is what ci-local.sh's own
teardown passes) or wait for the simulation to finish. --project-prefix
does not help here: it scopes only the compose-project sweep.