Implement hybrid coordinate cache warming strategy: piggyback coords
via CP flag when they fit within transport MTU, send standalone
CoordsWarmup (0x14) message when they don't. On CoordsRequired or
PathBroken receipt, send CoordsWarmup immediately with source-side
rate limiting (default 2s per destination, configurable).
- Add CoordsWarmup = 0x14 session message type (empty body, CP flag)
- Add send_coords_warmup() following send_session_msg() pattern
- Restructure send_session_data() to send standalone warmup before
data packet when piggybacked coords exceed MTU
- Add immediate CoordsWarmup response in handle_coords_required()
and handle_path_broken() with per-destination rate limiting
- Add coords_response_interval_ms config (node.session)
- Add RoutingErrorRateLimiter::with_interval() constructor
- Zero transit-path changes: existing try_warm_coord_cache() handles
CoordsWarmup identically to CP-flagged data packets
- Update design docs (session layer, wire formats, mesh operation,
configuration)
FIPS_OVERHEAD was 150 but had two bugs: the session AEAD tag (16 bytes)
was listed in the comment but missing from the arithmetic, and the
coordinate budget (~60 bytes) was undersized and didn't belong in a
constant representing fixed data path overhead.
Corrected to 106 bytes (the actual fixed overhead without coordinates).
This increases effective_ipv6_mtu from 1322 to 1366 for standard
Ethernet, well above the IPv6 minimum of 1280.
Added a guard in send_session_data() that computes the total wire size
with coordinates before committing to include them. If adding coords
would exceed the transport MTU, the CP flag is skipped and the warmup
counter is not decremented. This prevents silently producing oversized
packets at tree depth 2+.
Updated design docs (ipv6-adapter, wire-formats, mesh-operation) with
corrected overhead values.
Session-layer encryption used an implicit nonce counter with no counter
on the wire, requiring packets to arrive in exact order. Under bulk
transfer load (e.g., SCP), UDP packet loss or reordering permanently
desynchronized sender/receiver counters, causing all subsequent
decryption to fail with no recovery.
Add an 8-byte counter field to the DataPacket wire format and switch
from implicit-counter decrypt() to decrypt_with_replay_check() which
uses the explicit wire counter plus a 2048-packet sliding replay
window — the same pattern already used at the link layer.
Wire format: msg_type(1) + flags(1) + counter(8) + payload_len(2) = 12
bytes (was 4). FIPS_OVERHEAD updated 127 → 135 bytes accordingly.
Add src_addr to SessionDatagram envelope (34-byte header: msg_type +
src_addr + dest_addr + hop_limit) so transit routers can route error
signals back to the packet's originator.
Reclassify CoordsRequired/PathBroken as link-layer error signals
(plaintext inside SessionDatagram) rather than e2e encrypted session
messages. Transit routers generate these when forwarding fails and
route them to src_addr; if source is also unreachable, drop silently.
Remove redundant src_addr/dest_addr/hop_limit from SessionSetup,
SessionAck, and DataPacket (now in envelope). DataPacket header
reduced from 36 to 4 bytes. Remove PathBroken.original_src.
Fix routing loop vulnerability: gate bloom filter path on having
cached dest_coords to prevent blind forwarding between peers.
Simplify select_best_candidate() to require coordinates.
Fix gossip protocol type codes (0x11->0x20, 0x12->0x30, 0x13->0x31)
for consistency across all design docs.
All 5 design docs updated and cross-checked for consistency.
335 tests pass, zero warnings.
Johnathan Corgan
Origami74andJohnathan Corgan