mirror of
https://github.com/jmcorgan/fips.git
synced 2026-08-09 00:04:54 +00:00
f2e6b8befbb984e01847eefce835dfafe1a4c6d1
219
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Johnathan Corgan
|
6def31bcf6 |
Admit rekey msg1 from established peers regardless of accept_connections
The accept_connections gate at the top of handle_msg1 was applied unconditionally, so rekey msg1 from a peer with whom an established link already existed was dropped on the same path as fresh handshakes from strangers. Combined with the dual-init tie-breaker, this deadlocked at ~25 minutes when both sides' rekey timers fired near-simultaneously: the smaller-NodeAddr side wins as initiator and expects the larger side to consume its rekey msg1, but if the larger side has accept_connections=false the gate dropped it. Both sides retried at 1 Hz indefinitely; the affected peer fell out of MMP-active rotation. Extract the gate decision into Node::should_admit_msg1, which admits unconditionally when addr_to_link already has an entry for the (transport_id, remote_addr) pair (rekey/restart on an established session) and otherwise consults the transport's accept_connections(). Fresh msg1 from strangers is still rejected before any Noise crypto. Three unit tests pin the truth table: no transport (admit), accept_off no-link (reject, behavior unchanged), accept_off with-link (admit, the carve-out). The fix generalizes for free to BLE, which has the same Node-level gate. TCP and Tor were never subject to this deadlock because their accept condition is runtime state (bind_addr.is_some() / onion_address.is_some()), not a config flag. |
||
|
Johnathan Corgan
|
bf77ececad |
Fix DNS responder silent-drop on systemd-resolved deployments
The previous default configured systemd-resolved with `resolvectl dns fips0 [<fips0_addr>]:5354`, intended to bypass an Ubuntu 22 systemd 249 interface-scoping bug. That target collides with the daemon's mesh-interface filter on Linux: when an IPv6 packet's destination belongs to a non-loopback interface, the kernel attributes the packet to that interface in IPV6_PKTINFO (ipi6_ifindex == fips0) even though loopback delivery is used (tcpdump shows lo). The mesh-interface filter sees arrival_ifindex == mesh_ifindex and silently drops every query at trace level — invisible to operators at the default debug level. Net effect on stock deployments: every .fips query on systemd-resolved hosts was silently dropped. Daemon side ----------- - Default `dns.bind_addr` changes from "::" to "::1" (IPv6 loopback only). The mesh-interface filter is then defanged on the default path because loopback isn't reachable from mesh peers. The filter remains in place defensively for operators who explicitly bind "::" to expose a mesh-reachable responder. fips-dns-setup backend unification ---------------------------------- - New `try_global_drop_in` backend writes /etc/systemd/resolved.conf.d/fips.conf with DNS=[::1]:5354 and Domains=~fips. Inserted ahead of `try_resolvectl` in the dispatch chain. The standard loopback path has no interface scoping, so ipi6_ifindex reports lo and the filter passes. - All other backends now target [::1]:5354 to match the daemon's default IPv6-loopback bind: - try_dns_delegate writes DNS=[::1]:5354 - try_dnsmasq writes server=/fips/::1#5354 - try_nm_dnsmasq writes server=/fips/::1#5354 - Fixed dns-delegate file path: was /etc/systemd/dns-delegate/, must be /etc/systemd/dns-delegate.d/ (with .d suffix). systemd-resolved silently ignored the previous path. - fips-dns-teardown handles the new global-drop-in backend in cleanup. - The legacy resolvectl per-link backend stays as a fallback, documented to require careful daemon bind_addr coordination. fips-gateway upstream pairing ----------------------------- - gateway.dns.upstream default changes from 127.0.0.1:5354 to [::1]:5354 to match the daemon's default bind. Linux IPv6 sockets bound to explicit ::1 do not accept v4-mapped traffic, so the old default would have caused the gateway's startup DNS reachability probe to time out and systemd to restart-loop the service. - Operators who set a non-default daemon `dns.bind_addr` must also set `gateway.dns.upstream` to match — documented inline. Documentation ------------- - packaging/common/fips.yaml and packaging/openwrt-ipk fips.yaml examples updated; rationale for the bind_addr choice and the daemon/gateway pairing recorded inline. Test coverage ------------- - testing/dns-resolver/test.sh: real-fipsd end-to-end scenario added. Builds fipsd in a Debian 12 builder image (cached), runs the daemon with a real TUN in a privileged container, configures DNS via the setup script, and asserts `dig @127.0.0.53 AAAA <npub>.fips` returns AAAA. Refactored as a parameterized helper running across Debian 12/13 and Ubuntu 22/24/26 (5 e2e scenarios). Backend-aware assertions: on systemd >= 258 the expected backend is dns-delegate; on older systemd it's global-drop-in. Strict content checks fail CI on any [::1]:5354 drift. fips-gateway also exercised in the debian12 scenario to lock the gateway-upstream pairing. Renamed all "fipsd" references to "fips" (project convention). - testing/deb-install/ (new harness): builds the actual .deb via cargo-deb in a Debian 12 builder image (cached), installs via apt across each target distro, verifies maintainer scripts, conffile placement, binary placement, and end-to-end .fips resolution after start. Also exercises fips-gateway against the installed daemon to verify the gateway/daemon default pairing on a real .deb path. - This is the test layer that was missing — the previous harness only verified config files were written, never that queries reached the daemon. Verified: dns-resolver 78/78 assertions, deb-install 55/55 assertions across all 5 distros (debian:12, debian:trixie, ubuntu:22.04, ubuntu:24.04, ubuntu:26.04). |
||
 
|
34e00b9f6e |
Add Nostr-mediated overlay discovery and UDP NAT traversal (#53)
Optional peer discovery and NAT hole-punching path gated behind a new
`nostr-discovery` cargo feature. Nodes publish signed overlay endpoint
adverts to public Nostr relays, consume peer adverts to populate
fallback dial addresses, and use STUN-assisted UDP hole punching with
NIP-59 gift-wrap offer/answer signaling to establish direct UDP paths
between NATed peers. Once a punched socket is up, it is handed into
the existing FIPS UDP transport and the standard Noise/FMP session
stack takes over unchanged.
The cargo feature is in the default feature set
(`default = ["nostr-discovery"]`) so stock builds include it; a
build that explicitly disables default features (or selects a
feature set without `nostr-discovery`) does not link the nostr /
nostr-sdk crates and does not emit a no-op poll in the tick loop.
Runtime behavior is independently gated by
`node.discovery.nostr.enabled`, which defaults to false; if the
config enables Nostr on a non-feature build, startup logs a
warning and continues without it.
== Cargo feature and dependencies
- New cargo feature `nostr-discovery = ["dep:nostr", "dep:nostr-sdk"]`.
Not in the default feature set.
- New optional Linux-only dependencies: `nostr 0.44` (features: std,
nip59) and `nostr-sdk 0.44`. Gift-wrap unwrap is hand-rolled in
`src/discovery/nostr/signal.rs` rather than relying on the SDK's
rumor-author check, which FIPS sidesteps by trusting `seal.pubkey`
exclusively.
== Wire format
Overlay advert event: `kind 37195`, parameterized replaceable
(NIP-01 application-defined replaceable range 30000-39999), with
`d = "fips-overlay-v1"`. The digits visually spell FIPS (7=F, 1=I,
9=P, 5=S); a relay survey confirmed the kind is unused.
Advert content carries the version tag, endpoint list
(`udp|tcp|tor` + addr), optional signal-relay and stun-server
metadata, and `issuedAt` / `expiresAt` timestamps. Endpoint
`addr: "nat"` is the sentinel that triggers traversal on the peer
side. NIP-40 `expiration` tag bounds staleness on permanent
shutdown. Lifecycle relies on parameterized-replaceable
supersession; the daemon does not emit NIP-09 kind-5 deletes —
strict relays (Damus, Primal) race delete-against-replace and can
silently drop the replacement.
Gift-wrapped signal event: `kind 21059`. Punch packets carry magic
values `PUNCH_MAGIC` / `PUNCH_ACK_MAGIC`, a sequence number, and a
16-byte session hash.
== Discovery surface
- `src/discovery.rs` (always compiled)
- `EstablishedTraversal`: bound UDP socket + selected remote +
peer npub + optional transport name/config tuning overrides.
- `BootstrapHandoffResult`: returned on successful handoff —
allocated transport id, local/remote addrs, peer NodeAddr,
session id.
- `src/discovery/nostr/` (`#![cfg(feature = "nostr-discovery")]`)
- `types.rs`: wire and control types described above. `ADVERT_KIND`
constant. `BootstrapError` enumerates failure modes (disabled,
missing advert, missing NAT endpoint, no usable relays, invalid
advert, invalid npub, signal timeout, punch timeout, replay,
STUN failure, protocol, nostr, io, serde, event-parse).
- `runtime.rs`: `NostrDiscovery` coordinator. Owns the shared
nostr-sdk `Client`, subscribes to advert + signal event kinds,
maintains a bounded advert cache and a bounded seen-sessions
replay set, drains `BootstrapEvent::{Established, Failed}` for
the node to consume, exposes `update_local_advert`,
`request_connect`, `advert_endpoints_for_peer`,
`cached_open_discovery_candidates`, and `shutdown`.
- `signal.rs`: NIP-59 gift-wrap encode/decode. Outbound wraps are
built against per-attempt ephemeral keys; inbound events are
unwrapped against the node identity.
- `stun.rs`: RFC 5389/8489 Binding Request client with
XOR-MAPPED-ADDRESS parsing for both IPv4 and IPv6; used only to
observe the initiator's own reflexive address against its
locally configured STUN list (peer-advertised STUN is
informational, never an egress target).
- `traversal.rs`: per-attempt candidate-pair punch planner.
Allocates a fresh `0.0.0.0:0` UDP socket per attempt, enumerates
LAN-private and ULA interface addresses alongside the STUN
reflexive address, schedules probe/ack exchanges at the
configured interval for the configured duration, and picks the
first candidate pair that authenticates end-to-end.
Strategy ordering is Reflexive↔Reflexive first, then LAN, then
Mixed. The STUN-observed pair is the only candidate that's reliable
across arbitrary network topologies; trying it first prevents the
planner from latching onto a misleading host-candidate path before
the reflexive path gets a chance. There is no catch-all
Local↔Local strategy: a previous design that paired every local
host candidate from one side with every local host candidate from
the other could declare success on a one-way reachable asymmetric
L3 path (corporate VPN, Tailscale subnet route, overlapping private
address space), only for the FMP handshake to stall because the
return path didn't match. The legitimate `Lan` strategy still pairs
candidates that share a subnet.
== Configuration surface
`node.discovery.nostr.*` (`NostrDiscoveryConfig`), all `serde(default)`
with `deny_unknown_fields`:
- `enabled` (default false), `advertise` (default true)
- `advert_relays`, `dm_relays`, `stun_servers`: defaults are
`wss://relay.damus.io`, `wss://nos.lol`, `wss://offchain.pub`
for both relay lists, and Google / Cloudflare / Twilio for STUN.
Operators are expected to override for production. Other
verified-working public relays for reference:
`nostr.bitcoiner.social`, `nostr-pub.wellorder.net`,
`nostr.oxtr.dev`, `nostr.mom`.
- `app` (default `"fips-overlay-v1"`), `signal_ttl_secs` (120)
- `policy`: `NostrDiscoveryPolicy::{Disabled, ConfiguredOnly (default),
Open}` — controls whether advert-derived endpoints are consumed
only for peers carrying `via_nostr = true`, or also for
non-configured peers within a budget cap.
- `share_local_candidates` (default false) — when false, the offer's
`local_addresses` list is empty and peers see only the reflexive
address. Enable per-node only for genuinely same-LAN deployments;
off-by-default eliminates the misleading-path failure mode for
the common case where peers are not on the same broadcast domain.
- `open_discovery_max_pending` (64) — caps queued open-discovery
retries; bounded by available outbound slots.
- `max_concurrent_incoming_offers` (16) — semaphore against offer
spam; excess offers are debug-logged and dropped.
- `advert_cache_max_entries` (2048) and `seen_sessions_max_entries`
(2048) — bound memory under ambient relay volume; overflow
evictions are debug-logged.
- `attempt_timeout_secs` (10), `replay_window_secs` (300)
- `punch_start_delay_ms` (2000), `punch_interval_ms` (200),
`punch_duration_ms` (10000)
- `advert_ttl_secs` (3600), `advert_refresh_secs` (1800)
Per-peer and per-transport flags:
- `PeerConfig.via_nostr: bool` — when true (and Nostr is enabled),
advert-derived addresses are appended as fallback dial candidates
after static addresses for that peer.
- `PeerConfig.addresses` is now `serde(default)` and may be empty
when `via_nostr: true`; validation requires at least one of the
two to be present per peer, and the error message names the
peer's npub.
- `UdpConfig.advertise_on_nostr: Option<bool>` and
`UdpConfig.public: Option<bool>` — UDP transports can be
advertised either as direct `host:port` (public = true) or as the
`addr: "nat"` sentinel that triggers rendezvous on the peer side.
- `TcpConfig.advertise_on_nostr` and `TorConfig.advertise_on_nostr`
— TCP and Tor onion endpoints can be advertised as directly
reachable.
- A reserved peer address `transport: udp, addr: "nat"` parses without
special-casing in YAML and routes through the bootstrap runtime.
Cross-field validation (`Config::validate`, called from `Node::new`
and `Node::with_identity`):
- Any transport with `advertise_on_nostr = true` requires
`node.discovery.nostr.enabled = true`.
- Any peer with `via_nostr = true` requires
`node.discovery.nostr.enabled = true`.
- A non-public UDP advert (`advertise_on_nostr = true`,
`public = false` — i.e. `udp:nat`) additionally requires at least
one `dm_relay` and at least one `stun_server`.
Surfaced as `ConfigError::Validation`.
== Node integration
`src/node/lifecycle.rs` is the main integration point.
- At node start (after transports are up, before TUN), if Nostr is
enabled and the feature is compiled in, `NostrDiscovery::start` is
invoked, the initial local overlay advert is built from the live
transport set and published, and the runtime handle is stored.
- The rx tick loop calls `poll_nostr_discovery` (feature-gated both
at method definition and call site), which refreshes the local
advert, drains bootstrap events, adopts established traversals,
schedules retries for failed traversals, and — under `policy:
open` — enqueues outbound retries for non-configured peers
visible in the advert cache, bounded by
`open_discovery_max_pending` and the remaining outbound slots.
- Outbound peer dialing is refactored to `try_peer_addresses`, which
first exhausts the static address list in priority order and only
then appends advert-derived fallback addresses; both lists run
through the same `attempt_peer_address_list` code path. The
`udp:nat` sentinel address triggers `NostrDiscovery::request_connect`
for the peer instead of a direct dial and returns `Ok(())`.
- `build_overlay_advert` walks operational transports, consults
per-instance `UdpConfig` / `TcpConfig` / `TorConfig` (matching by
optional transport instance name), and emits an `OverlayAdvert`
including `signalRelays` and `stunServers` when any UDP endpoint
is advertised as NAT.
- `adopt_established_traversal` is the bootstrap handoff API:
allocates a new `TransportId`, constructs a `UdpTransport` with
the user-supplied (or default) `UdpConfig`, calls the new
`adopt_socket_async` to reuse the punched socket verbatim,
registers the transport in the normal transport map, records it
in `bootstrap_transports`, and calls `initiate_connection` so the
normal handshake path runs. On failure, the transport is stopped
and removed cleanly and the set membership is rolled back.
- On clean shutdown, `NostrDiscovery::shutdown` is awaited so
background tasks stop before transports are torn down. (The
advert is not explicitly retracted; NIP-40 expiration plus the
next refresh from any live publisher supersedes it.)
New `Node` fields:
- `nostr_discovery: Option<Arc<NostrDiscovery>>` (feature-gated).
- `bootstrap_transports: HashSet<TransportId>` — per-peer UDP
transports adopted from NAT traversal, cleaned up via
`cleanup_bootstrap_transport_if_unused` whenever the link,
connection, peer, or pending-connect referencing them is removed.
Retry and error surface:
- `RetryState.expires_at_ms: Option<u64>` — optional absolute expiry
for a retry entry. `pump_retries` drops expired entries with an
info log. Used for open-discovery retries, which expire at two
times the advert TTL.
- New `NodeError::BootstrapHandoff(String)` returned from
`adopt_established_traversal` when the underlying transport
adoption fails or local address discovery fails.
- New `ConfigError::Validation(String)`.
- A small refactor extracts `Node::now_ms()` and reuses it across
lifecycle, rx-loop tick, and timeout bookkeeping.
== UDP transport
`src/transport/udp/`:
- `UdpRawSocket::adopt(std::net::UdpSocket, recv_buf, send_buf)`:
adopts an externally bound socket, makes it non-blocking, applies
the configured buffer sizes (warning if the kernel clamps), and
reports the resulting local address. Preserves the NAT mapping —
no rebind.
- `UdpTransport::adopt_socket_async(std::net::UdpSocket)`: the
`start_async` analogue for an already-bound socket, wiring the
async socket and recv task exactly as the fresh-bind path would.
- `Drop` impl for `UdpTransport`: if a transport is dropped while
still holding a recv task or socket (for example on error
teardown), aborts the task, clears the socket, and emits a debug
log so the cleanup is visible in tracing rather than silent.
== Logging and observability
Default `EnvFilter` demotes third-party relay-pool DEBUG output to
TRACE-only: `nostr_relay_pool`, `nostr_sdk`, and `nostr` are pinned
at INFO when our level is anything below TRACE, and at TRACE when
our level is TRACE — so the raw frames are still reachable when
explicitly asked for. RUST_LOG continues to override completely.
Concise one-line DEBUG events are emitted at the meaningful points
in the discovery / hole-punch sequence:
- `advert: published` (event id, relay count, endpoints, ttl)
- `advert: peer cached` (notify-loop ingress for non-self)
- `advert: resolved` (cache hit / relay fetch outcome)
- `traversal: initiator starting`
- `traversal: initiator STUN observed` (reflexive, local count)
- `traversal: offer sent` (session id, relay count, event id)
- `traversal: answer received` (accepted, reflexive, local)
- `traversal: initiator punch succeeded` (remote addr)
- `traversal: offer received` (responder side)
- `traversal: responder STUN observed`
- `traversal: answer sent`
- `traversal: responder punch succeeded`
Npubs are shortened to `npub1<4>..<4>` and event/session ids to
their first 8 hex characters.
Other operator-facing logs:
- `UdpTransport` adoption and drop paths log at info / debug.
- `adopt_established_traversal` logs at debug on entry and info on
successful return, tagged with peer npub, session id, transport
id, and both socket endpoints, so the bootstrap handoff is
traceable end-to-end alongside the `UdpTransport::drop` log.
- `cleanup_bootstrap_transport_if_unused` logs at debug when the
reference-count check drops an adopted transport.
- `connect_peer` tags its entry `debug!` with `peer_npub` so
downstream STUN, punch, and handshake logs for the same peer
correlate for operators.
- Advert-cache and seen-sessions overflow evictions log at debug so
mis-sized caps are visible under ambient relay volume.
- Gift-wrap unwrap failures on `SIGNAL_KIND` events log at trace
(hot path: fires for every unrelated signal event on the same
relay).
- Traversal-offer handler failures log at debug. Expected conditions
such as punch timeout on symmetric NAT are covered there; real
problems are reported upstream via `BootstrapEvent::Failed`.
- Inbound-offer rate-limit messages name the governing config field
(`max_concurrent_incoming_offers`) and state that the offer was
rate-limited rather than failing.
== Tests
- 18 new unit tests in `src/discovery/nostr/tests.rs` covering advert
encoding, signal envelope round-trip, STUN parsing, punch-packet
codec, and replay-window enforcement. Run under the
`nostr-discovery` feature.
- Config-validation tests in `src/config/mod.rs` covering the three
cross-field invariants and YAML parsing of the full
`node.discovery.nostr` block plus `peers[].via_nostr`, empty
`addresses` with `via_nostr: true`, and a `udp: nat` address.
- `src/node/tests/bootstrap.rs` integration tests that drive a
synthetic traversal (bound UDP socket pair + synthetic peer
identity) through `adopt_established_traversal` and assert the
Noise handshake completes over the adopted socket.
- Punch-planner tests assert reflexive-before-LAN ordering and that
same-LAN scenarios still include the LAN target in the plan.
- `testing/nat/` Docker NAT lab harness:
- Local `strfry` relay, local STUN responder, and one or two
router containers performing `iptables` NAT.
- Node LAN interfaces are provisioned with explicit `veth` pairs
injected into the node and router namespaces so every packet
traverses the router namespace (plain Docker bridges are not
used for the LAN).
- `cone` scenario: both peers behind full-cone-emulation NAT
(SNAT with source-port preservation, inbound DNAT back to the
single LAN host regardless of remote source); asserts UDP
traversal succeeds and link remote addresses are on the router
WAN subnet.
- `symmetric` scenario: `MASQUERADE --random-fully`; asserts UDP
traversal fails and TCP fallback converges over router-
published WAN addresses.
- `lan` scenario: both peers share a LAN subnet; asserts LAN
addresses are preferred over reflexive ones.
- Cleanup tears down all profile-gated services
(`--profile cone --profile symmetric --profile lan`) so no
orphan containers survive a run.
- `testing/scripts/build.sh` builds the Docker test image with
`--features "tui nostr-discovery"` by default so NAT-harness
binaries include bootstrap support.
== CI
- Linux release build and nextest unit-test job both use
`--features "gateway nostr-discovery"` so the feature-gated code
and its unit tests compile and run in CI.
- Three new integration matrix entries (`nat-cone`, `nat-symmetric`,
`nat-lan`) invoke `testing/nat/scripts/nat-test.sh`, collect
`docker compose logs` on failure, and always stop containers.
== Packaging and operations
- `packaging/common/fips.yaml` ships a fully commented
`node.discovery.nostr.*` block, plus documented
`advertise_on_nostr` / `public` examples under the UDP transport,
an `advertise_on_nostr` example under TCP, and a `via_nostr: true`
example under the static peer section with both a direct
`host:port` UDP address and a `udp: nat` fallback.
- `.github/workflows/package-openwrt.yml`: NIP-94 release event
publishes target the new default relay set.
== Documentation
- `README.md`: overlay discovery + NAT traversal moved from
"Near-term priorities" into "What works today".
- `docs/design/fips-intro.md`: rewrites the paragraphs that
previously described Nostr discovery and NAT traversal as future
work; describes the shipped mechanism and the feature gate.
- `docs/design/fips-transport-layer.md`: drops the "(future
direction)" qualifier from the Nostr Relay Discovery section,
expands with the `udp:nat` advertisement and bootstrap handoff
description, and updates the Current State callout.
- `docs/design/fips-mesh-layer.md`: notes that mid-session NAT
rebinding (roaming) and initial NAT traversal (Nostr path) are
distinct mechanisms.
- `docs/design/fips-configuration.md`: documents the full
`node.discovery.nostr.*` surface, including the three resource
caps and `share_local_candidates`.
- `docs/design/fips-nostr-discovery.md`: design and configuration
reference for the shipped mechanism, including the empty-
`addresses`-with-`via_nostr` shorthand.
- `docs/proposals/nostr-udp-hole-punch-protocol.md`: adds an
Implemented status callout, clarifies that the punch socket is
per-peer and per-attempt rather than shared with the application
listener, aligns field names with the shipped JSON
(`sessionId`, `issuedAt` / `expiresAt`, `reflexiveAddress`,
`localAddresses`, `stunServer`), sets the `d`-tag to
`fips-overlay-v1`, names the kind as 37195, and notes that
advertised STUN entries are informational.
- `docs/proposals/README.md`: adds a Status column and marks the
hole-punching proposal Implemented.
- `CHANGELOG.md`: Unreleased > Added entry covering the discovery
path, STUN/punch path, configuration surface, and Docker NAT lab.
Co-authored-by: Johnathan Corgan <johnathan@corganlabs.com>
|
||
|
Johnathan Corgan
|
f16b837a12 |
Tune overly aggressive discovery rate limiting
The default 30s post-failure backoff (300s cap, doubling per consecutive failure) was set to bound traffic from chatty apps looking up unreachable targets, but in practice it dominates cold-start mesh convergence: a single timed-out lookup during initial bloom-filter propagation suppresses any retry for 30s, and the existing reset triggers (parent change, new peer, first RTT, reconnection) don't fire on a stable post-handshake topology. The suppression window winds up dictating the protocol's effective time-to-converge instead of bounding repeat traffic. Replaces the single-lookup-with-internal-retry model (`timeout_secs`/`retry_interval_secs`/`max_attempts`) with a per-attempt timeout sequence in `node.discovery.attempt_timeouts_secs`, defaulting to `[1, 2, 4, 8]`. Each attempt sends a fresh LookupRequest with a new random request_id so successive attempts can take different forwarding paths as the bloom and tree state evolve. The destination is declared unreachable only after the sequence is exhausted (15s total at the default). Disables post-failure suppression by default (`backoff_base_secs`/ `backoff_max_secs` now `0`/`0`). The `DiscoveryBackoff` machinery stays in tree (inert at zero base/cap); operators with chatty apps generating repeat lookups against unreachable destinations can opt back in. `PendingLookup` field shape unchanged so the control-socket `show_routing` JSON (`pending_lookups[].attempt`/`initiated_ms`/ `last_sent_ms`) keeps the same schema for fipstop and external consumers; `last_sent_ms` now means "current-attempt start" under the new state machine. |
||
|
Johnathan CorganandGitHub
|
cbc78091ab |
Rationalize cargo feature and platform-gate surface (#79)
Drop the `tui`, `ble`, and `gateway` cargo features and replace them with platform cfg gates. Plain `cargo build` now produces every subsystem appropriate for the target platform with no feature flags required. Motivation: - `default = ["tui", "ble"]` broke `cargo build` on macOS and Windows because `ble` pulled in `bluer` (BlueZ, Linux-only). Every non-Linux packager needed `--no-default-features`. - The feature flags on `ble` and `gateway` were redundant with their platform-gated deps (`bluer`, `rustables`). The parallel gating was inconsistent and error-prone. - `tui` feature protected against a ratatui binary-size concern that no longer applies in 2026. Cargo.toml: - Remove `tui`, `ble`, `gateway` features; `default = []`. - Promote `ratatui` to a non-optional top-level dependency. - Move `rustables` from top-level optional into the Linux target block, non-optional. - Split `bluer` into its own target block with `cfg(all(target_os = "linux", not(target_env = "musl")))` — BlueZ isn't available on musl router targets and `libdbus-sys` doesn't cross-compile to musl without pkg-config sysroot setup. - Drop `required-features` from the `fipstop` and `fips-gateway` `[[bin]]` entries. build.rs: - Emit a `bluer_available` custom cfg when `target_os == "linux"` and `target_env != "musl"`, for use in place of the verbose full predicate in source cfg gates. Source: - Replace every `#[cfg(feature = "gateway")]` with `#[cfg(target_os = "linux")]`. Gateway code works on both glibc and musl Linux (rustables is fine on musl). - Replace every `#[cfg(feature = "ble")]` with `#[cfg(bluer_available)]`. BLE-specific code (BluerIo module, bluer type conversions, BLE transport instance creation, resolve_ble_addr) is excluded on musl and non-Linux. Generic `BleAddr`, `BleIo` trait, `MockBleIo`, and `BleTransport<I>` still compile on all targets. - `src/bin/fips-gateway.rs`: always compiled, but `main()` is gated to Linux. Non-Linux stub exits 1 with a diagnostic. Existing non-Linux packaging scripts don't ship it, so the stub binary sits unused. Packaging and CI: - Drop `--features` and `--no-default-features` flags from every packaging script and workflow. Defaults now match each platform's capabilities. - AUR `fips-git` automatically aligns with stable `PKGBUILD` (both build with defaults). Verified: `cargo build --release` with no flags produces all four binaries on glibc Linux; all unit and integration tests pass across Linux/macOS/Windows/OpenWrt (musl) in CI. |
||
|
Johnathan Corgan
|
be0708ac9b |
Bring acl test module into the test tree
src/node/tests/acl.rs was added by PR #50 but never declared in src/node/tests/mod.rs, so none of its 4 unit tests ran. The tests themselves still compile and pass against current master code — the fix is a one-line mod declaration. Test count goes from 1031 to 1035. No code under test changes. This only adds previously-dormant coverage of the ACL enforcement call sites (outbound connect, inbound msg1, outbound msg2). |
||
|
Johnathan CorganandGitHub
|
ed312ac6f2 |
Fix DNS resolution on Ubuntu 22 with systemd-resolved (#77)
On Ubuntu 22 (systemd 249), systemd-resolved applies interface-scoped routing to per-link DNS servers. Configuring `resolvectl dns fips0 127.0.0.1:5354` caused resolved to attempt reaching 127.0.0.1 through fips0 (a TUN with only fd00::/8 routes), silently failing. The DNS responder never received queries. Newer systemd versions (250+) have explicit handling for loopback servers on non-loopback interfaces. Changes: - DNS responder default bind_addr changed from "127.0.0.1" to "::" so it listens on all interfaces, including fips0. Bind logic in lifecycle.rs now parses bind_addr as IpAddr and constructs a SocketAddr, handling IPv6 literal formatting. Factored into Node::bind_dns_socket with explicit IPV6_V6ONLY=0 via socket2, so IPv4 clients on 127.0.0.1:5354 still reach the responder regardless of the kernel's net.ipv6.bindv6only sysctl. - fips-dns-setup resolvectl backend now waits for fips0 to have a global IPv6 address, then configures resolved with [<fips0-addr>]:5354. That address is locally delivered by the kernel regardless of which interface resolved tries to route through. The dnsmasq and NetworkManager backends still use 127.0.0.1 (they don't have the interface-scoping issue). - Dropped hardcoded `bind_addr: "127.0.0.1"` from the packaged fips.yaml (Debian + OpenWrt). The shipped config was overriding the new default. - DNS queries are only accepted from the localhost. Verified end-to-end in a privileged Ubuntu 22.04 systemd container: dig @127.0.0.53 AAAA <npub>.fips resolves cleanly through systemd-resolved. The dns-delegate backend (systemd 258+) still uses 127.0.0.1; it has not been verified whether that backend has the same routing issue. |
||
|
Johnathan Corgan
|
03f6db58e8 | Merge branch 'maint' | ||
|
Johnathan Corgan
|
db4b32110c |
Validate bloom filter fill ratio on FilterAnnounce ingress
A malformed FilterAnnounce whose fill ratio produces an implausibly high false-positive rate is mostly useless for routing and, once merged into our outgoing filter via bitwise OR, propagates the saturated state to tree peers one hop per announce tick. A saturated filter also made estimated_count() return f64::INFINITY, which compute_mesh_size summed into its cached estimate. handle_filter_announce now rejects inbound FilterAnnounce whose derived FPR exceeds `node.bloom.max_inbound_fpr` (new config field, default 0.05 ≈ fill 0.549 at k=5). Rejection is silent on the wire, logs at WARN, and increments a new `bloom.fill_exceeded` counter. The peer's prior stored filter and filter_sequence are left unchanged so a single rejected announce does not wipe the peer's existing contribution to aggregation. After a successful outgoing FilterAnnounce send, a rate-limited WARN fires if our own filter's FPR exceeds the same cap, surfacing aggregation drift. Limited to once per 60 seconds via a new Node.last_self_warn field. BloomFilter::estimated_count() now takes max_fpr and returns Option<f64>. Returns None for saturated filters (regardless of cap) or when the filter's FPR exceeds max_fpr. Callers updated: debug logs render None as "—", the Debug impl uses f64::INFINITY as "no cap" and prints "saturated" instead of inf, control-socket JSON emits null, and compute_mesh_size propagates None into the already- Option<u64> estimated_mesh_size field. |
||
 Alex XieandJohnathan Corgan
|
745b523ac6 |
Add peer ACL enforcement with reloadable allow/deny files (#50)
Implement TCP Wrappers-style peer access control using /etc/fips/peers.allow and /etc/fips/peers.deny files. Evaluation order: allow overrides deny, default permit when no files exist. Three enforcement points: outbound connect (before dialing), inbound handshake (msg1 receipt, after restart/rekey classification), and outbound handshake completion (msg2, before peer promotion). Files support npub, hex pubkey, host alias, and ALL wildcard entries with automatic mtime-based reload. Adds fipsctl acl show query, 954-line acl module with unit tests, and a 6-node Docker integration harness (testing/acl-allowlist/) exercising insider, outsider, and allowed-remote scenarios. CI matrix entry included. Closes #50 Co-authored-by: Johnathan Corgan <johnathan@corganlabs.com> |
||
|
Johnathan Corgan
|
5cdcff7386 |
Merge branch 'maint' into master
# Conflicts: # CHANGELOG.md |
||
 Sats And SportsandJohnathan Corgan
|
b36966be3a |
Tighten TreeAnnounce validation to match spanning tree specification
Adds TreeAnnounce::validate_semantics() called from handle_tree_announce before any tree-state mutation. Enforces that the ancestry accompanying a parent declaration conforms to the spanning tree rules: - first ancestry entry matches the signed sender - is_root declarations carry a single-entry ancestry - non-root declarations include the signed parent as the second entry - the advertised root is the minimum node_addr in the ancestry Non-conforming announcements are rejected with a warn log and no state change. Adds unit tests for each rejected shape plus an integration test covering the full receive path in a two-node tree. Co-authored-by: Johnathan Corgan <johnathan@corganlabs.com> |
||
|
Johnathan CorganandGitHub
|
5abae0859e |
Add historical node and per-peer statistics with btop-style graphs (#64)
In-memory time-series history on the daemon: fast ring (1s × 3600) plus slow ring (1m × 1440) per metric, covering node-level gauges (mesh size, tree depth, peer count, active sessions), counters (parent switches, aggregate bytes/packets in/out), loss rate, and seven per-peer metrics keyed by NodeAddr (srtt_ms, loss_rate, bytes_in/out, packets_in/out, ecn_ce). The slow ring is produced by downsampling the fast ring on minute boundaries with Last / Sum / Mean aggregation chosen per metric type. Missing data is first-class. New peers back-fill NaN so every ring shares a time axis with the node rings; peers absent from a tick sample NaN (keeps alignment, shows as a visible gap); counter metrics emit NaN on decrease (new link_stats baseline after reconnect) so deltas aren't polluted. Peers are evicted 24h after last contact. Downsampling is NaN-aware: mean skips NaN, all-NaN slow windows stay NaN. Each history window always returns its full span at the chosen density (1m / 10m / 1h / 24h), front-padded with NaN when the ring hasn't yet accumulated enough samples, so switching between windows feels like zooming in or out rather than clipping to whatever has arrived. NaN serializes to JSON null via a custom serializer. Control socket queries: - show_stats_list enumerates registered metrics plus scope field and peer_retention_seconds. - show_stats_history returns one metric's series for a given window and granularity; accepts optional peer (npub) for per-peer metrics. - show_stats_all_history returns every metric in a single round trip; accepts optional peer to fetch all seven per-peer metrics. - show_stats_peers enumerates tracked peers with lifecycle metadata. - show_stats_history_all_peers returns one metric across all peers for grid rendering. - show_status carries short sparkline windows for the dashboard so the client can render without extra fetches. fipsctl gains `stats list`, `stats peers`, and `stats history <metric>` with `--peer` (hostname or npub) and `--plot` for a Unicode block sparkline. Plot header reports sample count, granularity, window, and gap count; NaN renders as a blank cell. fipstop dashboard grows inline sparklines (peer count, mesh size, aggregate bytes in/out). A new Graphs tab stacks every metric as an independent mini plot with its own autoscaled range; each plot uses btop's braille 2×4 filled-area algorithm (25-entry lookup table packing two samples per character, per-row gradient coloring for the characteristic btop vertical-band look, rounded borders with embedded titles). Three modes are cycled with `m`: Node (node-level stack), MetricByPeer (small-multiples grid, 1 / 2 / 3 columns by terminal width), PeerByMetric (existing stack scoped to one peer). `n` / `N` cycles the mode-specific selector (metric or peer), a selector row shows the current choice, and Graphs-tab refreshes re-fetch show_stats_peers so selectors track peer churn. Up / Down scrolls the stack, Left / Right cycles the window, `g` jumps to the tab. Implements IDEA-0084 (TASK-2026-0062). |
||
 Tim O'SheaandJohnathan Corgan
|
2d342a4e47 |
Add diagnostic queries for security validation and mesh debugging
Extend the fipsctl control query interface with visibility into internal
state critical for protocol security auditing, mesh troubleshooting, and
operational monitoring.
New command:
fipsctl show identity-cache
Lists every node identity cached by the daemon (learned from DNS
resolution, peer handshakes, sessions, and static config). Shows
npub, IPv6 address, display name, and LRU age alongside the
configured cache capacity.
Extended queries:
show peers — Noise session counters (send_counter, highest received
counter) for rekey urgency assessment. Per-peer replay suppression
and consecutive decrypt failure counts for active attack detection.
Session index visibility for hijack analysis. Rekey lifecycle
state (in_progress, draining, K-bit epoch).
show sessions — Handshake resend count during establishment for
connectivity debugging. Rekey and session health fields
(session_start, K-bit, coords warmup, drain state) when
established.
show cache — Individual coordinate cache entries with tree
coordinates, depth, path MTU, and age. Enables route-level
debugging by showing exactly which destinations have cached
routes and via what tree path. Renames the top-level count
field from "entries" to "count" for clarity.
show routing — Pending discovery lookups expanded from count to
per-target detail (attempt number, age, last sent). Pending
TUN packet queue depth for backpressure visibility. Connection
retry state per peer (retry count, next attempt, auto-reconnect
flag).
Updates fipstop to match the revised show_cache and show_routing
response schemas. Updates README monitoring section with the complete
fipsctl command list.
Co-authored-by: Johnathan Corgan <johnathan@corganlabs.com>
|
||
|
Johnathan Corgan
|
2a943e6695 |
Merge branch 'maint'
# Conflicts: # src/bin/fipsctl.rs |
||
|
Johnathan Corgan
|
42834b8008 |
Fix auto-connect reconnect on graceful peer disconnect
handle_disconnect() called remove_active_peer without scheduling a reconnect, orphaning auto-connect peers on a clean upstream shutdown. Mirror the pattern from the other three peer-removal paths (link-dead, decrypt failure, peer restart) which all schedule reconnect after removal. Adds test_disconnect_schedules_reconnect regression test that verifies handle_disconnect populates retry_pending for an auto-connect peer. Visibility of handle_disconnect bumped to pub(in crate::node) for direct unit-test access. Fixes #60. |
||
 OceanSlimandGitHub
|
774e33fd27 |
Add Windows platform support (#45)
Gate platform-specific code behind cfg attributes and add full Windows
support: TUN device via wintun, TCP control socket on localhost:21210,
Windows Service lifecycle (--install-service/--uninstall-service/--service),
CI build and test matrix, and packaging with ZIP builder and PowerShell
service management scripts.
Key changes:
- Cargo.toml: move tun/libc/rtnetlink behind cfg(unix); add wintun and
windows-service dependencies for Windows
- upper/tun.rs: wintun-based TUN implementation with netsh configuration
for IPv6 address, MTU, and fd00::/8 routing
- control/mod.rs: split into unix_impl/windows_impl; Windows uses TCP on
localhost:21210 with shared connection handler
- bin/fips.rs: refactor main() into run_daemon() accepting a shutdown
signal; add Windows Service support via windows-service crate
- transport/udp/socket.rs: platform-gated modules; Windows uses
tokio::net::UdpSocket (kernel drop count unavailable, returns 0)
- transport/ethernet: gate to cfg(unix); add Windows stub types
- config: platform-conditional default paths (socket, hosts) for Windows
- CI: add windows-latest to build matrix and test-windows job with
cargo-nextest
- packaging/windows: build-zip.ps1, install-service.ps1,
uninstall-service.ps1, and package-windows.yml workflow
- README/docs: Windows build instructions, service management, and
control socket platform differences
Linux and macOS behavior is unchanged.
|
||
|
Johnathan Corgan
|
e9da598f8a | Apply rustfmt to master-only code | ||
|
Johnathan Corgan
|
6196307f0e |
Merge branch 'maint'
# Conflicts: # src/bin/fips.rs # src/bin/fipstop/app.rs # src/config/mod.rs # src/config/node.rs # src/config/transport.rs # src/mmp/receiver.rs # src/mmp/sender.rs # src/node/handlers/handshake.rs # src/node/handlers/rekey.rs # src/node/lifecycle.rs # src/node/mod.rs # src/transport/ethernet/socket.rs # src/transport/mod.rs # src/upper/tun.rs |
||
|
Johnathan Corgan
|
13c0b70dc3 |
Add rustfmt formatting policy and reformat codebase
Add rustfmt.toml with stable defaults and apply cargo fmt to all source files. This establishes a consistent formatting baseline for CI enforcement. |
||
 Origami74
|
e693f4fb7e |
Add macOS support, fix bloom filter routing and MMP intervals
macOS platform: - Platform-native TUN interface management with shutdown pipe - Raw Ethernet transport with macOS socket backend (socket_macos.rs) - EthernetTransport and TransportHandle::Ethernet ungated from Linux-only - macOS .pkg packaging (build-pkg.sh, launchd plist, uninstall script) - CI: macOS build and unit test jobs; x86_64 cross-compiled from macos-latest via rustup target add x86_64-apple-darwin Gateway feature flag: - New opt-in `gateway` Cargo feature activates optional `rustables` dep - `pub mod gateway` and `Config.gateway` gated behind the feature so macOS builds never pull in Linux-only nftables bindings - `fips-gateway` bin has `required-features = ["gateway"]` - All Linux/OpenWrt/AUR packaging passes `--features gateway` CI / packaging: - package-linux, package-macos, package-openwrt now trigger on push to master/maint/next and on pull requests; release uploads remain tag-gated - Bloom filter routing fix: fall through to tree routing when no candidate is strictly closer - MMP intervals: raise MIN to 1s / MAX to 5s with 5-sample cold-start phase |
||
|
Johnathan Corgan
|
60e5fefb1f |
Implement outbound LAN gateway
Add fips-gateway binary: a separate daemon that allows unmodified LAN hosts to reach FIPS mesh destinations via DNS-allocated virtual IPs and kernel nftables NAT. Gateway DNS resolver: forwarding proxy on [::]:53 that intercepts .fips queries, forwards to daemon resolver (localhost:5354), allocates virtual IPs from pool, returns AAAA records. Always sends AAAA upstream regardless of client query type, returns proper NODATA for non-AAAA. Virtual IP pool: fd01::/112 pool with state machine lifecycle (Allocated → Active → Draining → Free), TTL-based reclamation, conntrack integration for session tracking. NAT manager: nftables DNAT/SNAT rules via rustables netlink API, per-mapping rule lifecycle, fips0 masquerade for LAN client source address rewriting. Network setup: local pool route, proxy NDP for virtual IPs on LAN interface, IPv6 forwarding validation. Control socket at /run/fips/gateway.sock with show_gateway and show_mappings queries. fipstop Gateway tab with pool summary gauge and mappings table. Gateway config section in fips.yaml with pool CIDR, LAN interface, DNS upstream, TTL, and grace period settings. Design doc at docs/design/fips-gateway.md. Integration test (testing/static/scripts/gateway-test.sh): three containers verifying DNS resolution, end-to-end HTTP, NAT state, TTL expiration, SERVFAIL fallback, and clean shutdown. |
||
|
SatsAndSportsandGitHub
|
51119347c3 |
Fix rekey msg1 rejected on non-accepting transports (#49)
The accept_connections gate in handle_msg1() was at the top of the function, dropping all inbound msg1 packets on transports that don't accept new connections (e.g. UDP holepunch). This blocked rekey handshakes on established links, causing repeated "dual rekey initiation" log floods. Move the gate below the existing-peer classification so it only blocks truly new inbound handshakes from unknown addresses. Rekey and restart msg1s for established peers are now processed normally. Fixes #47 PR #49 |
||
|
Johnathan Corgan
|
aac96510d0 | Merge branch 'maint' | ||
|
Johnathan Corgan
|
a859da7748 |
Fix bloom filter routing blocking greedy tree fallback
When bloom filter candidates existed but none were strictly closer to the destination in tree-coordinate distance, find_next_hop returned None without trying greedy tree routing. This caused NoRoute failures in topologies where the tree parent was closer but not a bloom candidate. Fall through to tree routing when no bloom candidate makes progress. |
||
|
Johnathan Corgan
|
db9549885a |
BLE transport reliability: probe promotion, send fail-fast, pubkey timeout
- Promote probe connections directly into pool instead of dropping and reconnecting. Eliminates fragile two-phase connect pattern (probe → disconnect → reconnect) that caused race conditions on restart. - send_async fails fast when no connection exists, triggering a background connect_async instead of blocking the event loop for up to 10s on inline L2CAP connect. Prevents control socket query timeouts and MMP processing stalls. - Add 5-second timeout to pubkey_exchange recv. Without this, a peer that connects but never sends its pubkey blocks the calling task forever, killing the scan_probe_loop or accept_loop entirely. - Add retry timer in scan_probe_loop for addresses that failed probe but won't get another DeviceAdded from BlueZ (deduplication). - Clear BlueZ cached devices before starting scan so fresh advertisements trigger DeviceAdded after daemon restart. - connect_async now performs pubkey exchange before promoting to pool, matching the accept_loop's expectation on inbound connections. - BLE tests updated to pre-establish connections via connect_async since send_async no longer does inline connect. |
||
|
Johnathan Corgan
|
89352d3218 |
Add BLE L2CAP transport with scan-based auto-connect
BLE transport implementation using L2CAP Connection-Oriented Channels (SeqPacket mode) via the bluer crate, behind cfg(feature = "ble"). Core transport: - BleTransport<I> generic over BleIo trait (BluerIo prod, MockBleIo test) - Connection pool with priority eviction (static > discovered, max 7) - Connect-on-send via connect_inline() matching TCP behavior - Per-connection receive loops with pool cleanup on disconnect Discovery and probing: - Combined scan_probe_loop using select! over scanner events and a BinaryHeap delay queue with per-entry random jitter (0-5s) to prevent herd effects when multiple nodes see the same beacon simultaneously - Pre-handshake pubkey exchange ([0x00][pubkey:32]) for IK identity - Cross-probe tie-breaker: smaller NodeAddr's outbound wins (same convention as FMP/FSP rekey dual-initiation) - Probed peers reported to DiscoveryBuffer; pool fills through normal node-layer auto-connect -> send_async -> connect_inline path Beacon management: - Periodic advertising: 1s burst every 30s (configurable via beacon_interval_secs / beacon_duration_secs) - FIPS service UUID for scan filtering Configuration (all fields optional with defaults): - adapter, psm, mtu, max_connections, connect_timeout_ms - advertise, scan, auto_connect, accept_connections - beacon_interval_secs (30), beacon_duration_secs (1) Hardware validated with two BLE nodes: - 2048-byte MTU, ~60-160ms RTT, zero-config auto-connect - BLE spike tool at testing/ble/ for standalone adapter validation 42 unit tests + 4 node-level integration tests, all CI-compatible via MockBleIo (no hardware required). tokio test-util added for time-dependent scan/probe tests. |
||
|
Johnathan Corgan
|
b8fbecc575 |
Demote 35 info-level log messages to debug for cleaner production output
Reduce info-level noise by moving intermediate steps, periodic telemetry, cross-connection resolution details, and redundant messages to debug. Info output now focuses on operator-relevant state changes: lifecycle events, peer promotions, session establishment, parent switches, and transport start/stop. Key categories demoted: - Handshake cross-connection resolution mechanics (10 messages) - Periodic MMP link/session metric reports (4 messages) - TUN cleanup messages redundant with lifecycle shutdown (4 messages) - Transport "packet channel closed" shutdown messages (4 messages) - Retry scheduling, discovery lookup initiation, other intermediate steps Change default RUST_LOG from debug to info in systemd unit files. |
||
|
Johnathan Corgan
|
6aff490251 |
Improve discovery protocol: bloom-guided tree routing with fallback
Replace discovery flooding with bloom-filter-guided tree routing: lookups sent only to tree peers (parent + children) whose bloom filter contains the target. If no tree peer matches, fall back to non-tree peers with bloom matches before dropping the request. This produces single-path forwarding through the spanning tree (90% traffic reduction) while recovering from dead ends caused by stale bloom filters, tree restructuring, or transit node failures. Remove visited bloom filter from LookupRequest wire format (-257 bytes per request). Tree routing is inherently loop-free; request_id dedup handles edge cases during tree restructuring. Add response- forwarded flag to prevent response routing loops from convergent request paths. Add originator-side exponential backoff (30s base, 300s cap) after lookup timeouts and bloom misses. Backoff resets on topology changes (parent switch, new peer, first RTT, reconnection). Add transit-side per-target rate limiting (2s minimum interval) for forwarded lookups as defense-in-depth. Add discovery retry within the timeout window (default: send at T=0, retry at T=5s, fail at T=10s) to compensate for single-path fragility. Lookups with zero eligible tree peers fail immediately. Improve discovery logging: promote key events to info (initiation, success, timeout with failure count). Add debug logging for dedup, pending packet retry, backoff suppression, forward rate limiting, and backoff reset. New config: discovery.backoff_base_secs, backoff_max_secs, forward_min_interval_secs, retry_interval_secs, max_attempts. New stats: req_backoff_suppressed, req_forward_rate_limited, req_bloom_miss, req_no_tree_peer, req_fallback_forwarded. Removed: req_already_visited, visited bloom filter. |
||
|
Johnathan Corgan
|
5053cf673d |
Add connect/disconnect control commands and maelstrom chaos scenario
Add runtime peer management to the FIPS daemon via control socket commands, and a new chaos simulation scenario that exercises dynamic topology mutation with ephemeral node identities. Daemon (connect/disconnect commands): - Extend control socket Request with optional params field - Add commands.rs module for mutating command dispatch, separate from read-only queries - Add api_connect() on Node: builds ephemeral PeerConfig (no auto- reconnect), pre-seeds identity cache, reuses initiate_peer_connection - Add api_disconnect() on Node: calls remove_active_peer(), clears retry_pending to suppress reconnection - Route non-show_* commands to async command dispatch in rx_loop fipsctl CLI: - Add Connect and Disconnect subcommands accepting npub or hostname - Resolve hostnames from /etc/fips/hosts before sending to daemon - Refactor socket I/O into reusable send_request helper Chaos simulator (maelstrom scenario): - Add PeerChurnManager: periodically disconnects a random active link and connects a random unconnected node pair via control socket - Add send_command() to control.py using base64-encoded JSON payloads to avoid shell quoting issues in docker exec - Add PeerChurnConfig to scenario with interval and ephemeral_fraction - Ephemeral identity support: nodes configured without nsec generate fresh keypairs on restart; simulator queries show_status for new npub and updates its cache via on_node_restart callback - Add maelstrom.yaml: all chaos dimensions (netem, link flaps, node churn, peer topology churn, traffic) with 50% ephemeral identity |
||
|
Johnathan Corgan
|
ebabb6e93c | Update changelog for post-v0.1.0 fixes and remove no-op clone | ||
 KieranandJohnathan Corgan
|
a5130b357e |
Fix ICMPv6 Packet Too Big source address for PMTUD
The PTB source was set to the local FIPS address, which Linux ignores (loopback PTB security check). Change the source to the original packet's destination (the remote peer) so the kernel sees it as coming from a remote router and honors the PMTU update. Add test coverage for the PTB source address invariant in both the icmp unit tests and the node integration tests. |
||
|
Johnathan Corgan
|
1020f90828 |
Fix reverse delivery ratio using per-interval deltas instead of lifetime cumulative
The reverse delivery ratio was computed as cumulative_packets_recv / highest_counter (lifetime values), while the forward ratio correctly used per-interval deltas. This made ETX increasingly unresponsive over session lifetime — early loss haunted the ratio forever, late loss barely moved it. Replace set_delivery_ratio_reverse() with update_reverse_delivery() that tracks previous snapshot state and computes deltas, matching the forward ratio's approach. Fixes GitHub issue #14 (Bug A). |
||
|
Johnathan Corgan
|
0f24333c0d |
Fix post-rekey jitter spikes from drain-window frames
After rekey cutover, frames encrypted with the old session can still arrive during the 10s drain window. These carry large sender timestamps from the old session, producing enormous transit deltas that spike the EWMA jitter estimator (observed 2,000-7,000ms spikes on UDP links). Add a time-based grace period (DRAIN_WINDOW_SECS + 5s = 15s) after rekey that suppresses jitter updates until drain-window frames have flushed. Baselines still update every frame so calculation resumes cleanly after grace expires. Fixes #10 |
||
|
KieranandJohnathan Corgan
|
e8ef15acb7 |
Fix stale session cleanup and identity cache pre-seeding
Cherry-picked from v0l PR #6 (issue #5): 1. remove_active_peer() now removes the end-to-end session from self.sessions when evicting a peer. The stale Established entry caused initiate_session() to silently return Ok(()) via the is_established() guard, preventing session re-establishment after link-layer reconnection. 2. initiate_peer_connections() pre-seeds the identity cache from configured peer npubs at startup, so TUN packets can be dispatched immediately without waiting for handshake completion. 3. schedule_reconnect() preserves accumulated backoff when a retry entry already exists, preventing exponential backoff reset on repeated link-dead cycles. Includes regression tests for all three fixes. |
||
|
Johnathan Corgan
|
5f7fe989f3 |
Fix rekey dual-initiation, parent selection, peer reconnect, and control socket
Rekey dual-initiation race (FMP + FSP): When both sides' rekey timers fire simultaneously on high-latency links (Tor ~700ms RTT), both msg1s cross in flight before dampening can suppress the second initiation. Each node acts as both initiator and responder, with set_pending_session() from the responder path destroying the initiator's in-progress state. Each side ends up with a pending_new_session from a different Noise handshake, causing AEAD verification failure after cutover and link death. Fix: deterministic tie-breaker in both FMP msg1 handler and FSP SessionSetup handler (smaller NodeAddr wins as initiator). Also guard against pending session overwrite from retransmitted msg1s. Parent selection SRTT gate: Peers without MMP RTT data are excluded from parent candidacy via has_srtt() filter, preventing freshly reconnected peers from appearing artificially attractive. First-RTT triggers immediate parent re-eval. The gate in evaluate_parent() skips unmeasured candidates when any peer has cost data, but falls back to default cost 1.0 during cold start when no peer has MMP data yet. Auto-reconnect on all peer removal paths: The excessive-decryption-failure and peer-restart epoch-mismatch removal paths were missing schedule_reconnect() calls, causing auto-connect peers to be permanently abandoned after those events. Control socket accessibility: Socket and parent directory chowned to root:fips with mode 0770/0750 so group members can use fipsctl/fipstop without root. Log level changes: Default RUST_LOG changed to debug in systemd service files. "Unknown session index" log reduced from debug to trace. |
||
|
Johnathan Corgan
|
324535e76d |
Make auto-connect peers retry indefinitely on initial connection failure
Previously, static peers configured with AutoConnect gave up after 6 attempts (1 initial + 5 retries). If the remote peer was offline at startup, the node permanently abandoned the connection. The reconnect path (after MMP link-dead) already retried indefinitely but only activated after a peer had been previously connected. Remove the reconnect parameter from schedule_retry() and always set reconnect=true when creating retry entries, since only auto-connect peers reach this code path. The 300s backoff cap prevents resource waste. The max_retries=0 config still works as an explicit kill switch. |
||
|
Johnathan Corgan
|
959134657f |
Fix FSP rekey cutover race and MMP metric discontinuity
The FSP XK rekey handshake has a race condition where the initiator can cut over (K-bit flip) and send data encrypted with the new session before msg3 reaches the responder. The responder has no pending session yet, so K-bit detection fails and packets are dropped. Defer FSP initiator cutover by 2 seconds after handshake completion (FSP_CUTOVER_DELAY_MS) to give msg3 time to traverse the mesh. FMP (IK, 2 messages) is unaffected since the responder completes during msg1 processing. Also fix MMP metric corruption after rekey cutover: the new session starts with counter 0 but MMP state carries highest_counter and GapTracker.expected_next from the old session, producing false reorder counts, jitter spikes, and invalid OWD trends. Add reset_for_rekey() methods that clear counter-dependent state while preserving RTT estimates. Additional fixes: - Remove stale peers_by_index entry on abandon_rekey error path - Replace redundant peers_by_index inserts with debug assertions verifying the pre-registration invariant - Tighten rekey integration test to zero tolerance (was 4 failures) |
||
|
Johnathan Corgan
|
6c90cf6c02 |
Implement Tor transport with operator visibility
Add TorTransport in src/transport/tor/ supporting three operating modes: Outbound (socks5 mode): - Non-blocking SOCKS5 connect via tokio-socks with per-destination circuit isolation (IsolateSOCKSAuth) - TorAddr enum for .onion and clearnet address types - Connection pool with per-connection receive tasks, reuses TCP stream FMP framing - connect_async()/connection_state_sync()/promote_connection() follow the same non-blocking polling pattern as TCP transport Inbound (directory mode — recommended for production): - Tor manages the onion service via HiddenServiceDir in torrc - FIPS reads .onion address from hostname file at startup - No control port needed — enables Tor Sandbox 1 (seccomp-bpf) - Accept loop mirrors TCP pattern with DirectoryServiceConfig Monitoring (control_port mode and optional in directory mode): - Async control port client supporting TCP and Unix socket connections via Box<dyn AsyncRead/Write> trait objects - AUTHENTICATE with cookie or password auth - 8 GETINFO queries: bootstrap, circuits, traffic, liveness, version, dormant state, SOCKS listeners - Background monitoring task polls every 10s, caches TorMonitoringInfo in Arc<RwLock> for synchronous query access - Bootstrap milestone logging (25/50/75/100%), stall warning (>60s), network liveness transitions, dormant mode entry - Directory mode optionally connects to control port when control_addr is configured (non-fatal on failure) Operator visibility: - show_transports query exposes tor_mode, onion_address, tor_monitoring (bootstrap, circuit_established, traffic, liveness, version, dormant) - fipstop transport detail view: Tor mode, onion address, SOCKS5/control errors, connection stats, Tor daemon status section - fipstop table view: tor(mode) label with truncated onion address hint Security hardening: - Per-destination circuit isolation via IsolateSOCKSAuth - Unix socket default for control port (/run/tor/control) - Reference torrc with HiddenServiceDir, VanguardsLiteEnabled, ConnectionPadding, DoS protections (PoW + intro rate limiting) Config: - TorConfig with socks5, control_port, and directory modes - DirectoryServiceConfig: hostname_file, bind_addr - control_addr, control_auth, cookie_path, connect_timeout, max_inbound_connections Testing: - 69 unit + integration tests with mock SOCKS5 and control servers - Docker tests: socks5-outbound (clearnet via Tor) and directory-mode (HiddenServiceDir onion service) Documentation: - Transport layer design doc: Tor architecture, directory mode - Configuration doc: Tor config tables and examples |
||
|
Johnathan Corgan
|
1bfb58845a |
Implement non-blocking transport connect for connection-oriented transports
TCP (and future Tor) transports previously established connections synchronously inside send(), blocking the node's RX event loop during TCP handshake. This is particularly problematic for Tor where SOCKS5 circuit establishment can take 30-120 seconds. Add a non-blocking connect path: - ConnectionState enum in transport layer (None/Connecting/Connected/Failed) - connect_async() on TcpTransport spawns background TCP connect task - connection_state_sync() polls task completion, promotes to pool - TransportHandle gains connect() and connection_state() dispatch methods - Node tracks PendingConnect entries for connection-oriented transports - initiate_connection() defers handshake for connection-oriented transports - start_handshake() extracted as separate method for deferred invocation - poll_pending_connects() in tick handler polls and completes handshakes - Failed connects trigger retry via schedule_retry() Connectionless transports (UDP, Ethernet) are unchanged — connect() is a no-op and connection_state() always returns Connected. The existing connect-on-send path in send_async() is preserved as fallback for reconnection after connection drops. 811 tests pass (6 new), clippy clean. |
||
|
Johnathan Corgan
|
6ab8b35755 |
Implement FSP port multiplexing and IPv6 header compression
Breaking wire format change: DataPacket payloads inside the AEAD envelope now carry a 4-byte port header [src_port:2 LE][dst_port:2 LE] before the service payload. The receiver dispatches by destination port. Port multiplexing: - send_session_data() takes src_port/dst_port params, prepends port header - New send_ipv6_packet() compresses IPv6 header and sends on port 256 - Receive path dispatches DataPackets by port: port 256 decompresses IPv6 header from session context and delivers to TUN, unknown ports dropped - Port constants: FSP_PORT_HEADER_SIZE (4 bytes), FSP_PORT_IPV6_SHIM (256) IPv6 header compression: - New ipv6_shim module with compress_ipv6()/decompress_ipv6() pure functions - Strips src/dst addresses (32 bytes) and payload length (2 bytes) from each packet, preserving traffic class, flow label, next header, and hop limit as 6-byte residual fields - Addresses reconstructed from session context on receive side - Net savings: 29 bytes per packet (overhead 106 → 77 bytes) - FIPS_IPV6_OVERHEAD constant (77 bytes), effective_ipv6_mtu() updated - 16 unit tests for round-trip fidelity, field preservation, error cases Documentation: - fips-wire-formats: DataPacket port header, port registry, IPv6 shim format tables, updated encapsulation walkthrough and overhead budget - fips-ipv6-adapter: FIPS_IPV6_OVERHEAD (77 bytes), updated MTU numbers, TUN reader/writer flow with compression steps, impl status - fips-session-layer: port-based service dispatch section, data transfer description, impl status - fips-intro: IPv6 adapter as port 256 service, node architecture updated - fips-mesh-operation: packet size summary with compressed overhead - DataPacket doc updated with port header and dispatch model - session_wire.rs module doc: DataPacket Port Multiplexing section |
||
|
Johnathan Corgan
|
2dc466f359 |
Add estimated mesh size from bloom filter cardinality
Compute network size estimate by summing bloom filter estimated entry counts from the spanning tree parent (upward) and children (downward), leveraging the tree's non-overlapping partition property. Uses the standard formula n = -(m/k) * ln(1 - X/m) already in BloomFilter. Surfaces the estimate in three places: - show_status JSON: "estimated_mesh_size" field - Periodic info log at MMP log interval (default 30s) - fipstop Node dashboard State section as "mesh: ~N" |
||
|
Johnathan Corgan
|
0bb6e70fb5 |
Add host-to-npub static mapping with DNS hostname resolution
Add a HostMap that resolves human-readable hostnames to npubs, enabling `gateway.fips` instead of the full `npub1...xyz.fips`. Two sources populate the map: peer `alias` fields from the YAML config and an operator-maintained hosts file at /etc/fips/hosts. The DNS responder auto-reloads the hosts file on each request by checking the file modification time, so operators can update mappings without restarting the daemon. - New src/upper/hosts.rs: HostMap, HostMapReloader, hostname validation, hosts file parser with auto-reload on mtime change - DNS resolver checks host map before falling back to direct npub - Node uses host map for peer display names - Default hosts file added to both .deb and tarball packaging - 26 new tests (789 total) |
||
|
Johnathan Corgan
|
abd5b09efd |
Add TCP transport node-level integration tests
Five tests covering the full TCP transport stack at the node level: two-node handshake, three-node chain convergence with bloom filter reachability, mixed UDP+TCP transport coexistence, MMP link-dead detection after connection loss, and reconnection after link death via connect-on-send. |
||
|
Johnathan Corgan
|
bf117df0ca |
Add periodic Noise rekey with fresh DH for forward secrecy (FMP + FSP)
Implement periodic full rekey at both protocol layers using fresh DH key exchanges. Uses the existing K-bit flag (FLAG_KEY_EPOCH / FSP_FLAG_K) to coordinate cutover between peers. FMP layer (IK pattern): - ActivePeer gains rekey state: pending/previous sessions, K-bit epoch tracking, drain window, dampening timer - Handshake state stored on ActivePeer with msg1 sent on existing link - Encrypted frame handler detects K-bit flips, promotes pending sessions, falls back to previous session during drain - Handshake handlers distinguish rekey from new connections using addr_to_link lookup with identity-based fallback - Free all session indices (current, rekey, pending, previous) on peer removal FSP layer (XK pattern): - SessionEntry gains parallel rekey fields with XK-specific state for the 3-message handshake - Route availability check before FSP rekey initiation - Encrypted session handler adds K-bit flip detection and dual-session decrypt fallback - SessionSetup/Ack/Msg3 handlers extended for rekey paths Defense-in-depth: - Consecutive decryption failure detector (threshold=20) triggers forced peer removal instead of waiting for link-dead timeout - Identity-based rekey detection as fallback when addr_to_link doesn't match (e.g., TCP ephemeral ports) Configuration: RekeyConfig with enabled flag, after_secs (default 120), and after_messages (default 65536) thresholds. Logging: info for successful K-bit cutover completions, warn for failures, debug for intermediate handshake steps, trace for routine operations (resends, drain cleanup). Rekey lifecycle: 1. Timer/counter fires -> initiator starts new handshake 2. Old session continues handling traffic during handshake 3. Handshake completes -> initiator cuts over, flips K-bit 4. Responder sees flipped K-bit -> promotes new session 5. Both keep old session for 10s drain window 6. After drain, old session discarded Integration test: Docker-based multi-phase test exercising both FMP and FSP rekey with aggressive timers (35s). Verifies connectivity across all 20 directed pairs survives two consecutive rekey cycles. Includes rekey topology, docker-compose profile, and CI matrix entry. Increase ping test convergence wait from 3s to 5s for CI reliability. |
||
|
Johnathan Corgan
|
920d93571a |
Fix link-dead detection skipping peers that never send data
The link-dead check required last_recv_time to be Some, so peers that completed a handshake but never sent any data back (last_recv_time = None) were silently skipped and lived forever as zombies. Fall back to session_start when no frame has ever been received. |
||
|
Johnathan Corgan
|
56d39f223b |
Add ECN congestion signaling and transport congestion detection
Implement hop-by-hop ECN congestion signaling through the FMP layer, transport-level congestion detection via kernel drop counters, and chaos harness integration for end-to-end validation. FMP/session ECN plumbing: - Thread ce_flag parsed at link layer through dispatch_link_message, handle_session_datagram, handle_session_payload, and handle_encrypted_session_msg to session delivery - Replace hardcoded false in session-layer record_recv() with actual ce_flag, activating ecn_ce_count tracking in session MMP ECN congestion detection and CE relay: - Add EcnConfig (node.ecn.*) with configurable loss_threshold (5%) and etx_threshold (3.0) for transit congestion detection - Add send_encrypted_link_message_with_ce() that ORs FLAG_CE into FMP header flags; original method delegates with ce_flag=false - Compute outgoing_ce = incoming_ce || local congestion on next-hop link, enabling hop-by-hop CE relay through transit nodes IPv6 ECN-CE marking: - Mark ECN-CE (0b11) in IPv6 Traffic Class on received DataPackets before TUN delivery when FMP CE flag is set - Only marks ECN-capable packets (ECT(0)/ECT(1)); Not-ECT packets unchanged per RFC 3168 Transport congestion abstraction and UDP kernel drop detection: - Add TransportCongestion struct to transport layer for transport- agnostic local congestion indicators - Replace tokio::UdpSocket with AsyncFd<socket2::Socket> using libc::recvmsg() with ancillary data parsing - Enable SO_RXQ_OVFL for kernel receive buffer drop counter on every packet, wiring up previously-stubbed UdpStats.kernel_drops - Add TransportDropState for per-transport delta tracking with 1s tick sampling via sample_transport_congestion() - Extend detect_congestion() with transport kernel drop check alongside MMP loss metrics Congestion monitoring and control: - Add CongestionStats (ce_forwarded, ce_received, congestion_detected, kernel_drop_events) to NodeStats with snapshot serialization - Wire counters into forwarding path, session handler, and transport drop sampling with rate-limited warn logging (5s interval) - Expose congestion data in show_routing control query and ecn_ce_count in show_mmp peer entries - Add congestion counters to fipstop routing tab in two-column layout Chaos harness integration: - Add query_routing(), query_transports(), snapshot_all_congestion() to chaos control module - Add congestion/kernel-drop log analysis in logs module - Add congestion-stress scenario: 10-node tree, 1 Mbps bandwidth, 5-10% netem loss, heavy iperf3 traffic - Add IngressConfig for tc ingress policing with per-peer policer filters simulating upstream bandwidth bottlenecks - Add iperf3 JSON result capture to traffic manager for throughput measurement across scenarios - Add ECN A/B test scenarios (ecn-ab-on/off.yaml) with ingress policing and comparison script - Enable TCP ECN negotiation (tcp_ecn=1 sysctl) in container entrypoint for end-to-end CE propagation Tests: - 10 ECN unit/integration tests: mark_ipv6_ecn_ce variants, CE relay chain (3-node propagation), EcnConfig serde roundtrip - 3 transport drop congestion detection unit tests Documentation: - Update fips-mesh-layer.md: replace outdated CE Echo stub with full ECN Congestion Signaling section covering detection logic, CE relay, IPv6 marking, session tracking, and monitoring counters - Update fips-configuration.md: add node.ecn.* parameter table and ecn block in complete reference YAML - Update fips-transport-layer.md: add Congestion Reporting section with TransportCongestion struct, congestion() trait method, and per-transport status; document AsyncFd/recvmsg/SO_RXQ_OVFL in UDP - Update chaos README: add congestion/ECN scenario docs, ingress traffic control, and iperf3 JSON capture sections - Update README.md: add ECN to features list and "What works today"; update transport and tooling entries |
||
|
Johnathan Corgan
|
70e365b14d |
Fix PMTUD: per-destination path MTU check and ICMPv6 MTU field width
Two bugs prevented Path MTU Discovery from working across heterogeneous links (e.g., ethernet→UDP boundary): 1. ICMPv6 Packet Too Big wrote the MTU as u16 into a 32-bit field (RFC 4443 §3.2), causing the kernel to read an inflated value. Fixed by changing build_packet_too_big() to use u32 and writing all 4 bytes. 2. handle_tun_outbound() only checked the local transport MTU, not the per-destination PathMtuState updated by MtuExceeded signals. Added a PathMtuState check after session lookup so subsequent oversized packets generate ICMPv6 PTB on TUN instead of being forwarded and dropped at the bottleneck hop. Added integration test exercising the full PMTUD loop across a 3-node chain with heterogeneous MTUs: oversized packet → forwarding failure → MtuExceeded signal → PathMtuState update → ICMPv6 PTB on TUN. |
||
|
Johnathan Corgan
|
77ac8c822e |
Add fipstop TUI monitoring tool with smoothed metrics and quality indices
fipstop: ratatui-based TUI for real-time monitoring of a running FIPS daemon. Tabs and navigation: - 8 navigable tabs: Node, Peers, Transports, Sessions, Tree, Filters, Performance, Routing - Tab/BackTab navigation with group separators in tab bar - Table views with selectable rows, detail drill-down panels, and scrollbars Node tab: - Runtime info: pid, exe path, uptime, control socket path, TUN adapter name - Identity: npub, node_addr, ipv6 address - State summary with peer/session/link/transport/connection counts - TUN IPv6 traffic and forwarded transit traffic counters Peers tab: - Table with Name, Address, Conn, Depth, SRTT, Loss, LQI, Pkts Tx/Rx - Detail panel: identity, connection info, transport cross-reference, tree/bloom state, link stats, MMP metrics with LQI Sessions tab: - Table with Name, Remote Addr, State, Role, SRTT, Loss, SQI, Path MTU, Last Activity - Detail panel: identity, session info, traffic stats, MMP metrics with SQI Transports tab: - Hierarchical tree view: expandable transport parents with nested links (▼/▶ indicators, ├─/└─ tree chars, Space/Arrow to expand/collapse) - Transport detail: type-specific stats (UDP/TCP/Ethernet) - Link detail: peer cross-reference with MMP metrics and LQI Performance tab: - Link-layer MMP: SRTT, loss, ETX, LQI, goodput per peer - Session-layer MMP: SRTT, loss, ETX, SQI, path MTU per session - Trend indicators (rising/falling/stable) with context-aware coloring Routing tab: - Routing state: cache sizes, pending lookups, recent requests - Coordinate cache: entries, fill ratio, TTL, expiry, avg age - Statistics: forwarding, discovery request/response, error signal counters Tree tab: - Spanning tree position with 16 announce stats (inbound/outbound/cumulative) Filters tab: - Bloom filter announce stats, per-peer fill ratio and estimated node count MMP metrics enhancements: - Add etx_trend DualEwma for smoothed ETX tracking - Add smoothed_loss() and smoothed_etx() accessors (long-term EWMA) - LQI (Link Quality Index) = smoothed_etx * (1 + srtt_ms / 100) - SQI (Session Quality Index) = same formula for session layer - All loss/ETX displays prefer smoothed values with raw fallback Control socket: - Add smoothed_loss, smoothed_etx, lqi/sqi to show_peers, show_sessions, and show_mmp JSON responses - Rename fips_address to ipv6_addr in show_status and show_peers - Add tun_name and control_socket to show_status - FHS-compliant 3-tier default path: $XDG_RUNTIME_DIR, /run/fips, /tmp Node extensions: - Add started_at/uptime() to Node - Add tun_name() accessor Docker sidecar updates: - TCP transport support via FIPS_PEER_TRANSPORT env var - Build scripts include fipstop binary |
||
|
Johnathan Corgan
|
71a5c68fa9 |
Implement comprehensive node and transport statistics
Add 71 new counters (84 values) across three categories: Node statistics (NodeStats, plain u64 — single handler context): - Forwarding: 9 counters x (packets + bytes) = 18 values. Covers received, decode_error, ttl_exhausted, delivered, forwarded, drop_no_route, drop_mtu_exceeded, drop_send_error, originated. - Discovery: 17 counters (packets only). Request path: received, decode_error, duplicate, already_visited, target_is_us, forwarded, ttl_exhausted, initiated, deduplicated. Response path: received, decode_error, forwarded, identity_miss, proof_failed, accepted, timed_out. - Error signals: 3 counters — coords_required, path_broken, mtu_exceeded. - Spanning tree: 16 counters. Inbound announce handling (received through accepted, parent switch, loop detection, ancestry change), outbound (sent, rate limited, send failed), cumulative events (parent switches/losses, flap dampening). - Bloom filter: 10 counters. Inbound (received through accepted), outbound (sent, debounce suppressed, send failed). Transport statistics (AtomicU64 + Arc — shared with spawned tasks): - UDP (6 counters, 8 values): packets/bytes sent/recv, send_errors, recv_errors, mtu_exceeded, kernel_drops (stub for SO_MEMINFO). - TCP (10 counters, 12 values): packets/bytes sent/recv, send_errors, recv_errors, mtu_exceeded, plus connection lifecycle counters (established, accepted, rejected, timeouts, refused). Control socket integration: - show_routing: forwarding, discovery, error signal stats - show_tree: spanning tree stats + per-peer bloom metrics (estimated_count, set_bits, fill_ratio) and coordinate paths - show_bloom: bloom filter stats + per-peer snapshots - show_transports: per-transport stats snapshots Also refactor UDP transport from flat files (udp.rs + udp_stats.rs) into directory module (udp/mod.rs + udp/stats.rs) matching TCP structure, and fix pre-existing clippy warnings in tree/tests.rs. |