Session-layer encryption used an implicit nonce counter with no counter
on the wire, requiring packets to arrive in exact order. Under bulk
transfer load (e.g., SCP), UDP packet loss or reordering permanently
desynchronized sender/receiver counters, causing all subsequent
decryption to fail with no recovery.
Add an 8-byte counter field to the DataPacket wire format and switch
from implicit-counter decrypt() to decrypt_with_replay_check() which
uses the explicit wire counter plus a 2048-packet sliding replay
window — the same pattern already used at the link layer.
Wire format: msg_type(1) + flags(1) + counter(8) + payload_len(2) = 12
bytes (was 4). FIPS_OVERHEAD updated 127 → 135 bytes accordingly.
Add src_addr to SessionDatagram envelope (34-byte header: msg_type +
src_addr + dest_addr + hop_limit) so transit routers can route error
signals back to the packet's originator.
Reclassify CoordsRequired/PathBroken as link-layer error signals
(plaintext inside SessionDatagram) rather than e2e encrypted session
messages. Transit routers generate these when forwarding fails and
route them to src_addr; if source is also unreachable, drop silently.
Remove redundant src_addr/dest_addr/hop_limit from SessionSetup,
SessionAck, and DataPacket (now in envelope). DataPacket header
reduced from 36 to 4 bytes. Remove PathBroken.original_src.
Fix routing loop vulnerability: gate bloom filter path on having
cached dest_coords to prevent blind forwarding between peers.
Simplify select_best_candidate() to require coordinates.
Fix gossip protocol type codes (0x11->0x20, 0x12->0x30, 0x13->0x31)
for consistency across all design docs.
All 5 design docs updated and cross-checked for consistency.
335 tests pass, zero warnings.
Johnathan Corgan
Origami74andJohnathan Corgan