Three infrastructure bugs fixed:
- DNS resolution never populated the identity cache because Docker
overwrites /etc/resolv.conf at container start. Fix: bind-mount
resolv.conf in the chaos compose template, matching the static and
sidecar test configs.
- Traffic generator used config-time npubs for iperf3 targets, but
ephemeral nodes generate fresh keypairs at startup. Fix: share the
peer churn manager's runtime npub cache with the traffic manager.
- Log analysis had no discovery counters and used wrong patterns.
Fix: add discovery section with correct log message matching.
Also adds timestamped output directories (YYYYMMDD-HHMMSS-scenario),
coord_ttl_secs override in maelstrom.yaml, FIPS_SIM_OUTPUT env var
support, and maelstrom-sparse scenario for sparse topology testing.
Add runtime peer management to the FIPS daemon via control socket
commands, and a new chaos simulation scenario that exercises dynamic
topology mutation with ephemeral node identities.
Daemon (connect/disconnect commands):
- Extend control socket Request with optional params field
- Add commands.rs module for mutating command dispatch, separate from
read-only queries
- Add api_connect() on Node: builds ephemeral PeerConfig (no auto-
reconnect), pre-seeds identity cache, reuses initiate_peer_connection
- Add api_disconnect() on Node: calls remove_active_peer(), clears
retry_pending to suppress reconnection
- Route non-show_* commands to async command dispatch in rx_loop
fipsctl CLI:
- Add Connect and Disconnect subcommands accepting npub or hostname
- Resolve hostnames from /etc/fips/hosts before sending to daemon
- Refactor socket I/O into reusable send_request helper
Chaos simulator (maelstrom scenario):
- Add PeerChurnManager: periodically disconnects a random active link
and connects a random unconnected node pair via control socket
- Add send_command() to control.py using base64-encoded JSON payloads
to avoid shell quoting issues in docker exec
- Add PeerChurnConfig to scenario with interval and ephemeral_fraction
- Ephemeral identity support: nodes configured without nsec generate
fresh keypairs on restart; simulator queries show_status for new
npub and updates its cache via on_node_restart callback
- Add maelstrom.yaml: all chaos dimensions (netem, link flaps, node
churn, peer topology churn, traffic) with 50% ephemeral identity
Update 9 documentation files to match current implementation:
- Add missing rekey config section (node.rekey.*) and host mapping
section to fips-configuration.md
- Update Ethernet frame format from [type:1][payload] to
[type:1][length:2 LE][payload] in wire-formats and transport docs
- Fix Ethernet effective MTU from interface-1 to interface-3
- Mark rekey as Implemented in mesh-layer and session-layer status tables
- Change TCP default port examples from 443 to 8443
- Add rekey, persistent identity, host mapping, mesh size estimation to
README features and status sections
- Update chaos scenario count from 16 to 20, add rekey topology to
static test docs
Implement hop-by-hop ECN congestion signaling through the FMP layer,
transport-level congestion detection via kernel drop counters, and
chaos harness integration for end-to-end validation.
FMP/session ECN plumbing:
- Thread ce_flag parsed at link layer through dispatch_link_message,
handle_session_datagram, handle_session_payload, and
handle_encrypted_session_msg to session delivery
- Replace hardcoded false in session-layer record_recv() with actual
ce_flag, activating ecn_ce_count tracking in session MMP
ECN congestion detection and CE relay:
- Add EcnConfig (node.ecn.*) with configurable loss_threshold (5%)
and etx_threshold (3.0) for transit congestion detection
- Add send_encrypted_link_message_with_ce() that ORs FLAG_CE into FMP
header flags; original method delegates with ce_flag=false
- Compute outgoing_ce = incoming_ce || local congestion on next-hop
link, enabling hop-by-hop CE relay through transit nodes
IPv6 ECN-CE marking:
- Mark ECN-CE (0b11) in IPv6 Traffic Class on received DataPackets
before TUN delivery when FMP CE flag is set
- Only marks ECN-capable packets (ECT(0)/ECT(1)); Not-ECT packets
unchanged per RFC 3168
Transport congestion abstraction and UDP kernel drop detection:
- Add TransportCongestion struct to transport layer for transport-
agnostic local congestion indicators
- Replace tokio::UdpSocket with AsyncFd<socket2::Socket> using
libc::recvmsg() with ancillary data parsing
- Enable SO_RXQ_OVFL for kernel receive buffer drop counter on every
packet, wiring up previously-stubbed UdpStats.kernel_drops
- Add TransportDropState for per-transport delta tracking with 1s
tick sampling via sample_transport_congestion()
- Extend detect_congestion() with transport kernel drop check
alongside MMP loss metrics
Congestion monitoring and control:
- Add CongestionStats (ce_forwarded, ce_received, congestion_detected,
kernel_drop_events) to NodeStats with snapshot serialization
- Wire counters into forwarding path, session handler, and transport
drop sampling with rate-limited warn logging (5s interval)
- Expose congestion data in show_routing control query and
ecn_ce_count in show_mmp peer entries
- Add congestion counters to fipstop routing tab in two-column layout
Chaos harness integration:
- Add query_routing(), query_transports(), snapshot_all_congestion()
to chaos control module
- Add congestion/kernel-drop log analysis in logs module
- Add congestion-stress scenario: 10-node tree, 1 Mbps bandwidth,
5-10% netem loss, heavy iperf3 traffic
- Add IngressConfig for tc ingress policing with per-peer policer
filters simulating upstream bandwidth bottlenecks
- Add iperf3 JSON result capture to traffic manager for throughput
measurement across scenarios
- Add ECN A/B test scenarios (ecn-ab-on/off.yaml) with ingress
policing and comparison script
- Enable TCP ECN negotiation (tcp_ecn=1 sysctl) in container
entrypoint for end-to-end CE propagation
Tests:
- 10 ECN unit/integration tests: mark_ipv6_ecn_ce variants, CE relay
chain (3-node propagation), EcnConfig serde roundtrip
- 3 transport drop congestion detection unit tests
Documentation:
- Update fips-mesh-layer.md: replace outdated CE Echo stub with full
ECN Congestion Signaling section covering detection logic, CE relay,
IPv6 marking, session tracking, and monitoring counters
- Update fips-configuration.md: add node.ecn.* parameter table and
ecn block in complete reference YAML
- Update fips-transport-layer.md: add Congestion Reporting section
with TransportCongestion struct, congestion() trait method, and
per-transport status; document AsyncFd/recvmsg/SO_RXQ_OVFL in UDP
- Update chaos README: add congestion/ECN scenario docs, ingress
traffic control, and iperf3 JSON capture sections
- Update README.md: add ECN to features list and "What works today";
update transport and tooling entries
Chaos harness enhancements:
- transport_mix config: weighted random transport assignment for random
topologies (erdos_renyi, random_geometric) with UDP/Ethernet/TCP
- Replace LoRa with Bluetooth L2CAP in cost-based/mixed-tech scenarios
using realistic netem values (15-40ms delay, 5-15ms jitter, 2-8% loss)
- New churn-20-mixed scenario: 20-node Erdos-Renyi with 60% UDP,
20% Ethernet, 20% TCP, full netem/link-flap/churn/bandwidth config
- Expanded chaos README with full scenario catalog in four categories
Static harness:
- Updated README with topology table and scenario count
Implement TCP transport for FIPS enabling firewall traversal and serving
as the foundation for future Tor transport. This is the first
connection-oriented transport in the system.
Key design decisions:
- FMP header-based framing: reuses existing 4-byte FMP common prefix for
packet boundary recovery with zero framing overhead
- Session survives TCP reconnection: Noise/MMP/FSP state bound to npub,
not TCP connection; MMP liveness is sole authority for peer death
- Connect-on-send: fresh connection on first send, transparent reconnect
- close_connection() trait method for cross-connection deduplication cleanup
New transport files:
- src/transport/tcp/mod.rs: TcpTransport, connection pool, accept loop
- src/transport/tcp/stream.rs: FMP-aware stream reader (shared with Tor)
Modified: transport trait (close_connection), TcpConfig, TransportHandle
match arms, create_transports(), initiate_connection() for connection-
oriented links, cross-connection tie-breaker cleanup, design docs.
Tree announce loop and TCP stability fixes:
- Preserve tree announce rate-limit state across reconnection: carry
forward last_tree_announce_sent_ms when a peer reconnects so the
rate-limit window isn't reset to zero
- Drop oversize TCP packets at sender: pre-send MTU check returns
MtuExceeded instead of writing to the stream, preventing receiver-side
connection teardown and reset-reconnect cycles
Chaos harness:
- TCP transport support: tcp_edges/has_tcp/tcp_peers in SimTopology,
transport-aware config_gen with per-edge transport type, TCP port 443,
pure-TCP node support
- Include all non-Ethernet edges in directed_outbound()
- Fix netem/links log messages to say "IP-based" instead of "UDP"
- Add tcp-chain, tcp-only, and tcp-mesh scenario files
Static harness:
- Transport-aware config generation (get_default_transport, transport_port)
- TCP transport injection via Python post-processing
- Add tcp-chain topology and docker-compose profile
Update the default UDP bind port from 4000 to 2121 (decimal) and the
default Ethernet EtherType from 0x88B5 to 0x2121 across all source
code, documentation, configuration templates, test fixtures, and
scripts. Remove references to "IEEE 802 experimental range" since
0x2121 is not in that range.
- Ethernet ioctl: cfg-gate the ioctl request parameter type — c_int on
musl, c_ulong on gnu — so the same code compiles on both
x86_64-unknown-linux-gnu and x86_64-unknown-linux-musl targets
- Chaos harness macOS support: replace direct host 'ip link' invocations
with a privileged Docker container helper (--net=host --pid=host) that
shares the Docker VM's namespaces, making veth pair setup work on both
Linux and macOS (where host 'ip' is unavailable and container PIDs
live inside the Docker Desktop VM)
- Python 3.9 compat: add 'from __future__ import annotations' to
docker_exec.py for X|Y union syntax support
- Add deploy/ to .gitignore
Co-authored-by: origami74 <origami74@gmail.com>
Implement raw Ethernet transport using AF_PACKET SOCK_DGRAM on Linux
with EtherType 0x88B5 (IEEE experimental range) and 1-byte frame type
prefix (0x00=data, 0x01=beacon).
Transport implementation:
- EthernetConfig with interface, ethertype, MTU, buffer sizes, and
four independent discovery knobs (discovery, announce, auto_connect,
accept_connections)
- PacketSocket/AsyncPacketSocket wrappers with ioctl helpers for
interface index, MAC address, and MTU queries
- EthernetTransport with Transport trait impl, async start/stop/send,
receive loop dispatching data frames and discovery beacons
- Discovery beacons (34 bytes: type + version + x-only pubkey) with
DiscoveryBuffer for peer accumulation and dedup
- Atomic statistics counters (frames, bytes, errors, beacons)
- Platform-gated with #[cfg(target_os = "linux")]
Transport-layer discovery integration:
- Promote auto_connect() and accept_connections() to Transport trait
with default implementations and TransportHandle dispatch
- Extract initiate_connection() so both static peer config and
discovery auto-connect share the same handshake initiation path
- Add poll_transport_discovery() to the tick handler to drain
discovery buffers and auto-connect to discovered peers
- Enforce accept_connections() in handle_msg1() — transports with
accept_connections=false silently drop inbound handshakes
Node integration:
- create_transports() handles Ethernet named instances
- resolve_ethernet_addr() parses "interface/mac" address format
- transport_mtu() generalized for multi-transport operation
Test harness:
- VethPair RAII struct for veth pair lifecycle management
- Three #[ignore] integration tests requiring root/CAP_NET_RAW:
two-node handshake, data exchange, mixed transport coexistence
- Chaos harness: transport-aware topology model, VethManager for
veth pairs between Docker containers, Ethernet-aware config gen,
netem split (HTB+u32 for UDP, root netem for veth), transport-aware
link flaps and node churn with veth re-setup
- Container entrypoint waits for configured Ethernet interfaces
before starting FIPS (handles veth creation timing)
- New scenarios: ethernet-only (4-node ring), ethernet-mesh (6-node
mixed UDP+Ethernet with netem and link flaps)
Documentation:
- fips-transport-layer.md: Ethernet section, beacon discovery, WiFi
compatibility, updated discovery state, trait surface additions,
implementation status table
- fips-configuration.md: Ethernet parameter table, named instances,
peer address format, mixed UDP+Ethernet example, complete reference
- fips-wire-formats.md: Ethernet frame type prefix note
Cost-based parent selection:
- Replace depth-only parent selection with effective_depth = depth + link_cost
- link_cost computed from locally measured MMP metrics: etx * (1.0 + srtt_ms / 100.0)
- Prevents bottleneck subtrees in heterogeneous networks where a LoRa link
at depth 1 would otherwise always beat fiber at depth 2
- Configurable hysteresis (default 0.2) prevents marginal parent switches
- Configurable hold-down timer (default 30s) suppresses re-evaluation
after parent switch
- Mandatory switches (parent lost, root change) bypass both safeguards
- Link costs passed as HashMap parameter to keep TreeState pure
Periodic re-evaluation:
- evaluate_parent() was only called on TreeAnnounce receipt or parent loss;
after tree stabilization, link degradation went undetected
- Added timer-based re-evaluation (reeval_interval_secs, default 60s) that
calls evaluate_parent() from the tick handler with current MMP link costs
- Respects existing hold-down and hysteresis safeguards
- Short-circuits when disabled or <2 peers
Design documentation:
- Update 7 design docs to reflect cost-based parent selection
- Replace depth-only algorithm descriptions with effective_depth model
- Replace rejected cumulative path cost spec with local-only design rationale
- Rewrite Example 2 (heterogeneous links) for local-only cost model
- Update config docs: parent_switch_threshold replaced by parent_hysteresis,
hold_down_secs, reeval_interval_secs
Chaos simulation enhancements:
- fips_overrides with deep merge for per-scenario FIPS config customization
- Explicit topology algorithm for deterministic test graphs
- Control socket querying via fipsctl for tree/MMP snapshot collection
- Edge existence validation in netem manager
- Per-link netem policy overrides
- 9 new chaos scenarios covering cost avoidance, depth-vs-cost tradeoffs,
stability, mixed topologies, periodic re-evaluation, and bottleneck parent
12 new unit tests, 667 total passing, clippy clean.
fips-link-layer.md:
- Rewrite Liveness Detection: explicit Heartbeat (0x51) with 10s interval
and 30s dead timeout replaces vague gossip-as-heartbeat description
- Add Auto-Reconnect section: MMP dead timeout triggers retry with
unlimited backoff for auto_reconnect peers
- Add Handshake Message Retry section: link + session layer resend with
exponential backoff within timeout window
- Add Heartbeat to Link Message Types table
- Update Implementation Status with three new implemented features
fips-configuration.md:
- Add handshake_resend_interval_ms, handshake_resend_backoff,
handshake_max_resends to rate_limit table
- Add heartbeat_interval_secs, link_dead_timeout_secs to general table
- Add peers[].auto_reconnect to peers table
- Note auto-reconnect bypasses max_retries in retry section
- Update complete reference YAML with all new parameters
fips-wire-formats.md:
- Rename 0x51 from reserved Keepalive to implemented Heartbeat
- Update Disconnect reason 0x07 to Heartbeat liveness timeout
testing/chaos/README.md:
- Add runner.log to output files
- Add Directed Outbound Configs subsection
Auto-reconnect:
- Add per-peer auto_reconnect config (default true) to PeerConfig
- schedule_reconnect() feeds removed peers back into retry system with
unlimited retries and exponential backoff after MMP dead timeout
- RetryState gains reconnect flag to distinguish startup retries
(max_retries-limited) from auto-reconnect (unlimited)
Retry re-fire fix:
- process_pending_retries() now pushes retry_after_ms past the handshake
timeout window after successful initiate_peer_connection(), preventing
retries from firing every tick with no backoff
Chaos sim improvements:
- Directed outbound configs: BFS spanning tree + lower-ID-first assignment
eliminates dual-connect race conditions in simulation
- Save runner log (runner.log) alongside per-node logs for event correlation
- Increase churn-20 traffic aggressiveness and node churn (max_down_nodes
3→5, traffic interval min 0s, duration max 90s, concurrent flows 5→10)
Johnathan Corgan
