mirror of
https://github.com/jmcorgan/fips.git
synced 2026-07-30 19:46:15 +00:00
c2d6283bd638fa58a5b97baea3ccf58d43fa6f36
10
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Johnathan Corgan
|
428773490f |
Close the gaps an adversarial review found in the new CI guards
Four of these are places the parity guard could stop covering something without saying so, which is the failure mode it exists to prevent. Removing the deb-install suite array left it green, because the dispatch cross-check compared against a hardcoded name rather than the array it was meant to read. An arm-shaped line at an unexpected indent, or one written in quotes, was dropped silently by the arm pattern; unexpected indents are now a hard error rather than a quiet skip, and quoted arms parse. A matrix leg with a type of chaos or deb-install but no scenario key raised a Python traceback instead of reporting a problem, and a leg carrying a scenario but no suite key was skipped entirely even though scenario is now the identity for those legs. The e2e builder no longer folds docker create's stderr into the container id. Docker prints warnings on success as well as failure, so a platform-mismatch warning would have become part of the id and made every later reference to that container fail, turning a working extraction into a spurious red. Also corrects the comment about registering a new chaos assertion type, which named only one of the two key sets that actually need it. |
||
|
Johnathan Corgan
|
99cb0a51fd |
Reject unknown keys when loading a chaos scenario
The scenario loader read every section and member through raw.get with a default, so a mistyped key was silently ignored and the block it belonged to stayed default-constructed while the YAML still looked correct on the page. Writing "assertion:" for "assertions:" disarmed a scenario's only assertions and left it unable to return a non-zero exit code; "link_flap:" for "link_flaps:" turned off the churn the scenario existed to inject, and a calm mesh then ran under the name of a chaos test.
Keys are now checked at load time, at the top level and inside every section with a fixed schema, including the netem policy bodies, the {min, max} ranges and the assertion bodies themselves. The error names the offending key, the section it appeared in, and the keys that section does understand. Three mappings are deliberately exempt because their keys are names the author chooses rather than a schema, and two sub-trees are passed through whole; all five are listed at the key sets with the reason.
Adding an assertion type now means registering it, so the next person to add one gets a rejection rather than a silent no-op. That coupling is the point and it is written down where they will see it. Verified against the seventeen scenarios in the tree, all of which still load, and against fixtures for each failure mode: a top-level typo, a nested typo, a typo inside an assertion body, and a section left empty, which previously raised an unrelated AttributeError from the next line of the loader.
|
||
|
Johnathan Corgan
|
b3a1fb464f |
testing: add bloom-storm chaos scenario
Six-node depth-4 mesh with an induced upstream parent flap. Asserts a
trailing-window ceiling on per-node `stats.bloom.sent` and a sanity
floor on parent-switch count over a ~3-4 min observation window.
Guards against the regression class where a spanning-tree update that
changes only an internal path edge (no root or depth delta) fails to
be properly contained and instead propagates to leaves as a sustained
bloom-traffic oscillation, visible only at fleet scale and only after
several minutes of uptime.
Adds a new chaos primitive (`link_swap`) for deterministic asymmetric
link-cost flapping and a post-run assertion framework with two
checks:
- `bloom_send_rate.max_per_node`: trailing-window ceiling on the
`show_bloom` stats counter delta. Calibrated against the
post-mortem reproduction harness data (per-variant counter table
against pre-fix vs post-fix binaries).
- `min_parent_switches.min_total`: sanity guard against a
misconfigured harness where the flap inducer fires but the
topology never produces a real parent-switch event (e.g., wrong
root election from a different seed). Without this, the
bloom-rate assertion would trivially pass on any binary
including a regressed one.
The runner exits 3 on assertion failure (alongside 0 success and 2
panic-detected). Threshold derivation is documented in the scenario
README; the seed pin is also documented there since smallest-NodeAddr
root election is sensitive to the pubkey hash ordering.
Wired into ci-local.sh's chaos pool and the GitHub CI chaos matrix.
|
||
|
Johnathan Corgan
|
5053cf673d |
Add connect/disconnect control commands and maelstrom chaos scenario
Add runtime peer management to the FIPS daemon via control socket commands, and a new chaos simulation scenario that exercises dynamic topology mutation with ephemeral node identities. Daemon (connect/disconnect commands): - Extend control socket Request with optional params field - Add commands.rs module for mutating command dispatch, separate from read-only queries - Add api_connect() on Node: builds ephemeral PeerConfig (no auto- reconnect), pre-seeds identity cache, reuses initiate_peer_connection - Add api_disconnect() on Node: calls remove_active_peer(), clears retry_pending to suppress reconnection - Route non-show_* commands to async command dispatch in rx_loop fipsctl CLI: - Add Connect and Disconnect subcommands accepting npub or hostname - Resolve hostnames from /etc/fips/hosts before sending to daemon - Refactor socket I/O into reusable send_request helper Chaos simulator (maelstrom scenario): - Add PeerChurnManager: periodically disconnects a random active link and connects a random unconnected node pair via control socket - Add send_command() to control.py using base64-encoded JSON payloads to avoid shell quoting issues in docker exec - Add PeerChurnConfig to scenario with interval and ephemeral_fraction - Ephemeral identity support: nodes configured without nsec generate fresh keypairs on restart; simulator queries show_status for new npub and updates its cache via on_node_restart callback - Add maelstrom.yaml: all chaos dimensions (netem, link flaps, node churn, peer topology churn, traffic) with 50% ephemeral identity |
||
|
Johnathan Corgan
|
56d39f223b |
Add ECN congestion signaling and transport congestion detection
Implement hop-by-hop ECN congestion signaling through the FMP layer, transport-level congestion detection via kernel drop counters, and chaos harness integration for end-to-end validation. FMP/session ECN plumbing: - Thread ce_flag parsed at link layer through dispatch_link_message, handle_session_datagram, handle_session_payload, and handle_encrypted_session_msg to session delivery - Replace hardcoded false in session-layer record_recv() with actual ce_flag, activating ecn_ce_count tracking in session MMP ECN congestion detection and CE relay: - Add EcnConfig (node.ecn.*) with configurable loss_threshold (5%) and etx_threshold (3.0) for transit congestion detection - Add send_encrypted_link_message_with_ce() that ORs FLAG_CE into FMP header flags; original method delegates with ce_flag=false - Compute outgoing_ce = incoming_ce || local congestion on next-hop link, enabling hop-by-hop CE relay through transit nodes IPv6 ECN-CE marking: - Mark ECN-CE (0b11) in IPv6 Traffic Class on received DataPackets before TUN delivery when FMP CE flag is set - Only marks ECN-capable packets (ECT(0)/ECT(1)); Not-ECT packets unchanged per RFC 3168 Transport congestion abstraction and UDP kernel drop detection: - Add TransportCongestion struct to transport layer for transport- agnostic local congestion indicators - Replace tokio::UdpSocket with AsyncFd<socket2::Socket> using libc::recvmsg() with ancillary data parsing - Enable SO_RXQ_OVFL for kernel receive buffer drop counter on every packet, wiring up previously-stubbed UdpStats.kernel_drops - Add TransportDropState for per-transport delta tracking with 1s tick sampling via sample_transport_congestion() - Extend detect_congestion() with transport kernel drop check alongside MMP loss metrics Congestion monitoring and control: - Add CongestionStats (ce_forwarded, ce_received, congestion_detected, kernel_drop_events) to NodeStats with snapshot serialization - Wire counters into forwarding path, session handler, and transport drop sampling with rate-limited warn logging (5s interval) - Expose congestion data in show_routing control query and ecn_ce_count in show_mmp peer entries - Add congestion counters to fipstop routing tab in two-column layout Chaos harness integration: - Add query_routing(), query_transports(), snapshot_all_congestion() to chaos control module - Add congestion/kernel-drop log analysis in logs module - Add congestion-stress scenario: 10-node tree, 1 Mbps bandwidth, 5-10% netem loss, heavy iperf3 traffic - Add IngressConfig for tc ingress policing with per-peer policer filters simulating upstream bandwidth bottlenecks - Add iperf3 JSON result capture to traffic manager for throughput measurement across scenarios - Add ECN A/B test scenarios (ecn-ab-on/off.yaml) with ingress policing and comparison script - Enable TCP ECN negotiation (tcp_ecn=1 sysctl) in container entrypoint for end-to-end CE propagation Tests: - 10 ECN unit/integration tests: mark_ipv6_ecn_ce variants, CE relay chain (3-node propagation), EcnConfig serde roundtrip - 3 transport drop congestion detection unit tests Documentation: - Update fips-mesh-layer.md: replace outdated CE Echo stub with full ECN Congestion Signaling section covering detection logic, CE relay, IPv6 marking, session tracking, and monitoring counters - Update fips-configuration.md: add node.ecn.* parameter table and ecn block in complete reference YAML - Update fips-transport-layer.md: add Congestion Reporting section with TransportCongestion struct, congestion() trait method, and per-transport status; document AsyncFd/recvmsg/SO_RXQ_OVFL in UDP - Update chaos README: add congestion/ECN scenario docs, ingress traffic control, and iperf3 JSON capture sections - Update README.md: add ECN to features list and "What works today"; update transport and tooling entries |
||
|
Johnathan Corgan
|
cd9289e0f3 |
Update test harness docs and add transport_mix support
Chaos harness enhancements: - transport_mix config: weighted random transport assignment for random topologies (erdos_renyi, random_geometric) with UDP/Ethernet/TCP - Replace LoRa with Bluetooth L2CAP in cost-based/mixed-tech scenarios using realistic netem values (15-40ms delay, 5-15ms jitter, 2-8% loss) - New churn-20-mixed scenario: 20-node Erdos-Renyi with 60% UDP, 20% Ethernet, 20% TCP, full netem/link-flap/churn/bandwidth config - Expanded chaos README with full scenario catalog in four categories Static harness: - Updated README with topology table and scenario count |
||
|
Johnathan Corgan
|
ec64a0dce1 |
Add TCP transport implementation and test harness support
Implement TCP transport for FIPS enabling firewall traversal and serving as the foundation for future Tor transport. This is the first connection-oriented transport in the system. Key design decisions: - FMP header-based framing: reuses existing 4-byte FMP common prefix for packet boundary recovery with zero framing overhead - Session survives TCP reconnection: Noise/MMP/FSP state bound to npub, not TCP connection; MMP liveness is sole authority for peer death - Connect-on-send: fresh connection on first send, transparent reconnect - close_connection() trait method for cross-connection deduplication cleanup New transport files: - src/transport/tcp/mod.rs: TcpTransport, connection pool, accept loop - src/transport/tcp/stream.rs: FMP-aware stream reader (shared with Tor) Modified: transport trait (close_connection), TcpConfig, TransportHandle match arms, create_transports(), initiate_connection() for connection- oriented links, cross-connection tie-breaker cleanup, design docs. Tree announce loop and TCP stability fixes: - Preserve tree announce rate-limit state across reconnection: carry forward last_tree_announce_sent_ms when a peer reconnects so the rate-limit window isn't reset to zero - Drop oversize TCP packets at sender: pre-send MTU check returns MtuExceeded instead of writing to the stream, preventing receiver-side connection teardown and reset-reconnect cycles Chaos harness: - TCP transport support: tcp_edges/has_tcp/tcp_peers in SimTopology, transport-aware config_gen with per-edge transport type, TCP port 443, pure-TCP node support - Include all non-Ethernet edges in directed_outbound() - Fix netem/links log messages to say "IP-based" instead of "UDP" - Add tcp-chain, tcp-only, and tcp-mesh scenario files Static harness: - Transport-aware config generation (get_default_transport, transport_port) - TCP transport injection via Python post-processing - Add tcp-chain topology and docker-compose profile |
||
|
Johnathan Corgan
|
d29da442ac |
Add Ethernet transport with beacon discovery
Implement raw Ethernet transport using AF_PACKET SOCK_DGRAM on Linux with EtherType 0x88B5 (IEEE experimental range) and 1-byte frame type prefix (0x00=data, 0x01=beacon). Transport implementation: - EthernetConfig with interface, ethertype, MTU, buffer sizes, and four independent discovery knobs (discovery, announce, auto_connect, accept_connections) - PacketSocket/AsyncPacketSocket wrappers with ioctl helpers for interface index, MAC address, and MTU queries - EthernetTransport with Transport trait impl, async start/stop/send, receive loop dispatching data frames and discovery beacons - Discovery beacons (34 bytes: type + version + x-only pubkey) with DiscoveryBuffer for peer accumulation and dedup - Atomic statistics counters (frames, bytes, errors, beacons) - Platform-gated with #[cfg(target_os = "linux")] Transport-layer discovery integration: - Promote auto_connect() and accept_connections() to Transport trait with default implementations and TransportHandle dispatch - Extract initiate_connection() so both static peer config and discovery auto-connect share the same handshake initiation path - Add poll_transport_discovery() to the tick handler to drain discovery buffers and auto-connect to discovered peers - Enforce accept_connections() in handle_msg1() — transports with accept_connections=false silently drop inbound handshakes Node integration: - create_transports() handles Ethernet named instances - resolve_ethernet_addr() parses "interface/mac" address format - transport_mtu() generalized for multi-transport operation Test harness: - VethPair RAII struct for veth pair lifecycle management - Three #[ignore] integration tests requiring root/CAP_NET_RAW: two-node handshake, data exchange, mixed transport coexistence - Chaos harness: transport-aware topology model, VethManager for veth pairs between Docker containers, Ethernet-aware config gen, netem split (HTB+u32 for UDP, root netem for veth), transport-aware link flaps and node churn with veth re-setup - Container entrypoint waits for configured Ethernet interfaces before starting FIPS (handles veth creation timing) - New scenarios: ethernet-only (4-node ring), ethernet-mesh (6-node mixed UDP+Ethernet with netem and link flaps) Documentation: - fips-transport-layer.md: Ethernet section, beacon discovery, WiFi compatibility, updated discovery state, trait surface additions, implementation status table - fips-configuration.md: Ethernet parameter table, named instances, peer address format, mixed UDP+Ethernet example, complete reference - fips-wire-formats.md: Ethernet frame type prefix note |
||
|
Johnathan Corgan
|
0d93a19e07 |
Implement cost-based parent selection with periodic re-evaluation
Cost-based parent selection: - Replace depth-only parent selection with effective_depth = depth + link_cost - link_cost computed from locally measured MMP metrics: etx * (1.0 + srtt_ms / 100.0) - Prevents bottleneck subtrees in heterogeneous networks where a LoRa link at depth 1 would otherwise always beat fiber at depth 2 - Configurable hysteresis (default 0.2) prevents marginal parent switches - Configurable hold-down timer (default 30s) suppresses re-evaluation after parent switch - Mandatory switches (parent lost, root change) bypass both safeguards - Link costs passed as HashMap parameter to keep TreeState pure Periodic re-evaluation: - evaluate_parent() was only called on TreeAnnounce receipt or parent loss; after tree stabilization, link degradation went undetected - Added timer-based re-evaluation (reeval_interval_secs, default 60s) that calls evaluate_parent() from the tick handler with current MMP link costs - Respects existing hold-down and hysteresis safeguards - Short-circuits when disabled or <2 peers Design documentation: - Update 7 design docs to reflect cost-based parent selection - Replace depth-only algorithm descriptions with effective_depth model - Replace rejected cumulative path cost spec with local-only design rationale - Rewrite Example 2 (heterogeneous links) for local-only cost model - Update config docs: parent_switch_threshold replaced by parent_hysteresis, hold_down_secs, reeval_interval_secs Chaos simulation enhancements: - fips_overrides with deep merge for per-scenario FIPS config customization - Explicit topology algorithm for deterministic test graphs - Control socket querying via fipsctl for tree/MMP snapshot collection - Edge existence validation in netem manager - Per-link netem policy overrides - 9 new chaos scenarios covering cost avoidance, depth-vs-cost tradeoffs, stability, mixed topologies, periodic re-evaluation, and bottleneck parent 12 new unit tests, 667 total passing, clippy clean. |
||
|
Johnathan Corgan
|
66c268a564 |
Add static and stochastic Docker test harnesses
Move examples/docker-network/ to testing/static/ and add testing/chaos/ as a new stochastic simulation harness. testing/static/ — Static 5-node test harness: - Fixed mesh, chain, and mesh-public topologies with docker compose - Manual test scripts (ping, iperf, netem) - Build script, config generation, key derivation testing/chaos/ — Stochastic network simulation: - Python orchestrator generating N-node FIPS meshes with dynamic network conditions, driven by reproducible YAML scenarios - Topology generation: random geometric, Erdos-Renyi, or chain graphs with BFS connectivity guarantee - Per-link netem: HTB classful qdiscs with u32 filters for per-peer impairment (delay, loss, jitter), stochastic mutation across configurable policy profiles - Per-link bandwidth pacing: HTB rate limiting with configurable tiers (1/10/100/1000 mbps) randomly assigned per edge - Link flaps: tc netem 100% loss with graph connectivity protection - Node churn: docker stop/start with netem re-application on restart, shared down_nodes tracking across all managers - Traffic generation: random iperf3 sessions between node pairs - Down-node guards: all docker exec callers check container liveness, auto-detect crashed containers via is_container_running() safety net - Log collection and post-run analysis (panics, errors, sessions, MMP metrics, tree reconvergence) - chaos.sh wrapper with --seed, --duration, --verbose, --list options - Four scenarios: smoke-10, chaos-10, churn-10, churn-20 |