The scenario's success criterion existed only as a comment: count
"Parent switched" in n04's log, expect at most 5. Nothing read it, and
the scenario declared no assertions at all, so its exit code could only
report that the mesh came up and nothing crashed.
Add a max_parent_switches assertion and wire that criterion to it.
The assertion takes an optional node scope, which is the part that
matters. The existing sibling counts mesh-wide, and a criterion written
about one node's log is a different quantity from the sum over every
node: across archived runs of this scenario n04 is 1 or 2 while the
mesh-wide total ranges 3 to 6. Asserting the sum against a per-node
threshold would check something other than what was specified, and at
this threshold would also have failed several runs that were fine.
Counting nothing must not read as stability. A node id absent from the
topology fails explicitly rather than matching zero log lines and
sailing under the ceiling, and a scenario that declares a parent-switch
assertion while setting a log level that suppresses the events it counts
is rejected at load rather than passing vacuously after a full run. The
parse rejects a mistyped key, a missing, negative, boolean or
non-integer ceiling, and a node written empty or as a non-string -- that
last one because YAML renders a bare `node:` as null, which would
silently revert to the mesh-wide count.
The scenario comment now records what the threshold is worth against
the 11 completed archived runs rather than a single sample: 5 is well
above anything observed, the daemon's own parent hold-down caps
switches near 6 per run, and nearly every switch lands during initial
tree formation before any mutation fires. So this catches only
near-pathological reparenting. Tightening to 3 would make it a real
detector, but that changes the stated criterion rather than fixing it,
so it is left as a decision.
Verified against a live run: the assertion evaluates n04 at 2 against
mesh-wide 4 and passes, and with the ceiling temporarily set to 0 the
scenario exits 3, the assertion-failure code, which it previously could
not reach.
The mapping-reclaimed check expects zero mappings, and read the count
with `r.get('data',{}).get('mappings',[])`. An error response carries
no data field, so it parsed to zero and satisfied the check without the
gateway having answered at all. The expected value and the failure
value were the same number, which is the shape that lets an assertion
pass without asking anything.
Require the key to exist and be a list, and exit non-zero otherwise, so
the existing fallback turns an unanswered or malformed response into a
failure. The gateway always emits the key on success, including for an
empty set, so a genuine zero still reads as zero; confirmed against the
running gateway, where the reclamation check passes.
The earlier show_mappings poll shares the parse and is left alone: it
waits for a positive two, which no error response can produce. The
hazard was already documented there, and this is the call site that was
exposed to it.
Case (a) sends an unallowed inbound request that the ruleset should
drop, and accepted any non-zero curl status as proof. A drop produces
no RST, so curl can only hit its deadline and exit 28; connection
refused, an unroutable address or a missing listener all fail too, with
different codes, and the check counted those as a blocked connection.
Require 28 exactly, so the assertion distinguishes silently dropped
from failed for some other reason. Confirmed against the harness: the
real run returns 28.
The baseline check matched `counter packets`, which any counter rule
satisfies whatever its verdict, including one that accepts. Require the
rendered drop rule instead.
The drop-counter read had the same weakness plus a worse one: it took
field three of the first line mentioning a counter, which is the packet
count only when the line begins with `counter`. On a rule such as
`tcp dport 9 counter packets 42 bytes 3000 drop` it printed the port
number. That shape is reachable, because the shipped ruleset includes
the operator drop-in directory ahead of the trailing default deny and a
drop-in may add its own counted drop. Extract by position within the
matched text, and take the last match rather than the first, since case
(a) falls through to the default deny that the ruleset emits as the
final rule.
Note in place at the baseline check that it still only proves a counted
drop rule exists somewhere in the table, not that it is the trailing
one; asserting rule position is a larger change than this warrants.
The sample output in the README is updated to the new wording.
The four rejection checks were independent greps over the whole log:
two npubs, a context and a decision. Together they proved only that
node-a mentioned each npub somewhere, rejected somebody on an inbound
handshake, and rejected somebody by denylist. Nothing tied a rejection
to a named peer, and node-a lists both denied peers as auto_connect
peers, so it logs their npubs on the outbound connect path whether or
not any rejection ever happened. The actual message was never matched.
Replace them with a helper that requires every given string on ONE
line, and assert per denied peer: the real message, that peer's npub,
and the denylist decision together. Strings match in any order by
chaining fixed-string greps over the surviving lines, so the assertion
does not depend on how the log formatter orders a message and its
fields. A grep over empty input yields the empty string rather than
anything a caller could mistake for a match, so an unreadable container
times out and fails instead of passing.
Two limits are written at the call sites rather than left implied. The
decision conjunct discriminates nothing, since the two allowing
variants return early and denylist is the only value that can reach
that warning. And node-a authorizes before dialing, so it emits a
fully formed rejection line for each denied peer on the outbound path;
these assertions are satisfiable without the inbound check running at
all, and it is the peer-count assertions that would catch that.
Verified against the running harness: all three find a real matching
line. The defect shape they replace was exercised offline first, with
the three strings spread across three lines, where the old checks
passed and the new ones fail.
wait_for_peers_exact fell back to 0 when it could not read a container's peer
count. Two of its six call sites are the ACL denial checks, which expect
exactly 0 connected peers — so a failed docker exec satisfied them on the
first iteration and the isolation property the suite exists to prove was
never observed. Confirmed against a container that does not exist: the old
reader returns "0" and the expect-zero comparison passes.
The reader now returns the empty string when the daemon does not answer,
which no numeric comparison can satisfy, and the timeout message says which
of the two happened — never answered, or answered the wrong number. Same
shape as admission-cap-test.sh's read_peer_count.
A test that greps the daemon's log for a message the daemon stopped emitting
does not fail. It stops observing, and an assertion built on it — especially
one expecting a count of zero — then passes because nothing can be seen
rather than because nothing happened. Several findings have come from that
one class, so it is now checked mechanically.
testing/check-log-strings.py extracts the strings test code matches against
daemon log text and requires each to exist in src/. It reads four shapes:
python `"..." in line` tests, the first argument of the shell log helpers,
bash associative-array pattern tables, and greps whose input is daemon log
output. Patterns carry regex syntax, so each is reduced to the longest
literal run of every alternation branch, with escaping resolved in the same
pass — `\.` is a literal dot and `.` is a wildcard, and conflating them would
let a pattern match text that is not there.
Scoping is by what a grep READS, not by what its file mentions. A suite greps
its own analyzer output, fipsctl JSON, Tor's log and ping output, and none of
those have to correspond to a string in src/; scoping on the file produced 34
false positives. Strings that legitimately do not come from src/ are named in
ALLOWED with a reason, so the exceptions are reviewable rather than invisible.
It found six dead strings, three of which were not previously known: a second
copy of "Excessive decrypt failures" in the interop pattern table, a dead
"Handshake error" branch inside an alternation whose other branches still
matched, and "bootstrap failed" in the NAT suite. All six are corrected to
what the daemon emits, or dropped where the surviving branch already covers
the case. Verified by breaking it two ways and confirming it reports.
Also here, since it is the same failure shape one layer down: the shared log
library returned an empty string for a container whose logs it could not
read, so analysing a missing container reported no panics, no errors and no
sessions, and exited 0 — indistinguishable from a clean run. It now reports
which containers could not be read and raises, matching the fix already
landed in the chaos copy.
Two local CI runs on one host both asked docker for 172.20.0.0/24 and the
second lost its whole static family to "Pool overlaps". Docker honours a
fixed subnet request verbatim, so the only robust fix is to stop making one:
fips-net now requests no subnet and docker assigns from its own pool, which
cannot hand the same range to two runs.
That means node addresses are not known before `up`, so peers address each
other by container hostname instead. The generator emits node-<id>, or the
topology's docker_host where the compose hostname differs — only the gateway
profile, whose services are gw-*. External peers keep the address the
topology gives them, since it is not ours to assign. The resolv.conf mount
stays: dnsmasq is what forwards these names to docker's resolver and .fips
to the daemon, so removing it would take out every .fips assertion.
generated-configs is now per-run as well. A shared directory let two runs
overwrite each other's node configs, which the subnet collision had been
hiding by killing runs before that window opened. The generator, the compose
bind mounts and env_file, the six scripts that read it, and teardown all
follow FIPS_CI_NAME_SUFFIX; unset, every path renders as before. Teardown
keeps the directory after a failed run, where it is the evidence of what the
failing nodes were configured with.
Three things this exposed that were wrong independently:
admission-cap built its tcpdump patterns from the topology file's docker_ip
literals. Floating the subnet makes those match nothing, which would have
left its expect-zero "no Msg2 leaked" assertion passing because it could no
longer see anything at all. It now reads addresses from the running
containers. Restarting the denied peers together also made them swap
addresses, so each peer's counts were really the pair's total; they are
restarted one at a time now, and a check fails the suite outright if two
denied peers ever share an address, because per-peer attribution is
impossible once they do.
Attribute lookups in the generator used a fixed ten-line window and read the
next node's fields when a node omitted an attribute. An external node
followed by an internal one was classified as internal, which under hostname
peering would emit a name that resolves nowhere. Lookups are bounded to the
node's own block; generated output is byte-identical for all eight
topologies.
The rekey outbound-only variant used to rewrite peer addresses to hostnames
to set up its scenario. The generator now does that everywhere, so the
rewrite matched nothing and was silently doing no work. It asserts the
premise instead, and fails if a numeric address ever reappears.
Verified by running three instances of this compose at once — tcp-chain plus
two independent meshes — which drew 10.128.2/3/4.0/24 with no overlap while
both meshes passed ping-test 20/20 over the real .fips path. tcp-chain is
run by neither CI runner, so it was checked by hand: chain peer counts 1/2/1
and multi-hop .fips reachable both directions over TCP.
gateway-lan still pins its own IPv4 and fd02:: ranges and is unchanged here,
so the gateway profile is not yet concurrency-safe.
Four of these are places the parity guard could stop covering something without saying so, which is the failure mode it exists to prevent. Removing the deb-install suite array left it green, because the dispatch cross-check compared against a hardcoded name rather than the array it was meant to read. An arm-shaped line at an unexpected indent, or one written in quotes, was dropped silently by the arm pattern; unexpected indents are now a hard error rather than a quiet skip, and quoted arms parse. A matrix leg with a type of chaos or deb-install but no scenario key raised a Python traceback instead of reporting a problem, and a leg carrying a scenario but no suite key was skipped entirely even though scenario is now the identity for those legs.
The e2e builder no longer folds docker create's stderr into the container id. Docker prints warnings on success as well as failure, so a platform-mismatch warning would have become part of the id and made every later reference to that container fail, turning a working extraction into a spurious red.
Also corrects the comment about registering a new chaos assertion type, which named only one of the two key sets that actually need it.
The guard that keeps "local green" and "GitHub green" meaning the same thing was invoked by nothing. Its only entry point was an exec behind an explicit --check-parity flag, which by exec-ing could not be combined with an actual run, and no workflow step called it at all. A guard nobody runs is a guard that does not exist, which is how the mixed-profile divergence on next survived unnoticed.
It now runs as the first stage of every local run and as its own job on GitHub. Locally it reports through the same result-recording path as every other stage, so a divergence sets the run's exit status instead of scrolling past. It is deliberately placed above the mode branches, so a divergence also fails --only, --test-only and --build-only runs: whichever subset was asked for, the claim that a local result means what a GitHub result means is what has broken. The GitHub side installs pyyaml explicitly rather than assuming the runner image carries it.
--check-parity keeps working exactly as before. Three comment blocks that described the old folded comparison are corrected here, in the workflow, the local runner and the testing README; they were spread across three files and only two mention the guard by name, so the third is best found by searching for what it claims rather than for the script.
The guard collapsed all thirteen chaos legs to the token "chaos" and all five deb-install legs to "deb-install", so sixteen of the thirty-four integration legs were invisible to it. Deleting twelve chaos legs and four deb-install legs from a copy of the workflow left it still reporting "CI parity OK". The fold existed because the guard compared the cosmetic suite name, which really does differ between the runners; both sides have carried a directly comparable scenario field all along, so the fix is to compare that instead, along with the chaos flags.
The local suite set is now discovered by sweeping ci-local.sh for suite arrays rather than reading a hardcoded list of variable names, and the deb-install distro list is read from the suite's own script. A suite dispatched with no backing array is invisible to either approach, so every run_suite arm is now checked to have one and the guard names any that does not. That is not hypothetical: next dispatches its mixed-profile suite without an array, and the guard could only report it as missing from the local runner without being able to say why.
The guard also now refuses to run rather than failing obscurely when python3 or pyyaml is absent, since a parity check that cannot run must not look like one that passed. Verified by breaking each thing it guards: legs deleted from the workflow, drifted chaos flags, a fabricated suite array, and a dispatch arm whose array was removed. That last case initially did not fire because the arm pattern was pinned to the wrong indentation, which the test caught.
The scenario loader read every section and member through raw.get with a default, so a mistyped key was silently ignored and the block it belonged to stayed default-constructed while the YAML still looked correct on the page. Writing "assertion:" for "assertions:" disarmed a scenario's only assertions and left it unable to return a non-zero exit code; "link_flap:" for "link_flaps:" turned off the churn the scenario existed to inject, and a calm mesh then ran under the name of a chaos test.
Keys are now checked at load time, at the top level and inside every section with a fixed schema, including the netem policy bodies, the {min, max} ranges and the assertion bodies themselves. The error names the offending key, the section it appeared in, and the keys that section does understand. Three mappings are deliberately exempt because their keys are names the author chooses rather than a schema, and two sub-trees are passed through whole; all five are listed at the key sets with the reason.
Adding an assertion type now means registering it, so the next person to add one gets a rejection rather than a silent no-op. That coupling is the point and it is written down where they will see it. Verified against the seventeen scenarios in the tree, all of which still load, and against fixtures for each failure mode: a top-level typo, a nested typo, a typo inside an assertion body, and a section left empty, which previously raised an unrelated AttributeError from the next line of the loader.
The e2e scenarios build fips and fips-gateway in a builder image and extract them with two docker cp calls whose stderr went to /dev/null and whose exit status was never tested. Because build_fips_for_e2e ended in a log call it returned 0 on every path, so the caller's guard could not fire. A failed extraction left the previous run's binaries in the cache, they satisfied the caller's executable check, and the five e2e legs then exercised the previous commit's code and reported green.
The extraction now deletes the cached binaries before it starts, which is what makes the stale case impossible rather than merely detected, and it checks each docker cp independently, reports the failure with docker's own message, verifies each extracted file is non-empty and executable, and returns an explicit status. This mirrors what the deb-install suite already does.
Confirmed by inducing the failure rather than by observing a green run. With both extractions broken and a stale binary in place, the old code logged "Cached fips (26936 bytes)" and went on to build the runtime image around it; the new code reports both docker errors, deletes the stale binaries and fails the suite. Breaking either extraction on its own is caught separately, and an unmodified run passes 7 of 7.
The chaos simulation could not report a failure on this line either: scenarios collided on globally-scoped container names and a shared config directory, the runner swallowed whatever they raised, and the harness discarded their exit codes before anything read them. The five commits scope the names and directories per scenario, give an aborted run its own exit code and let that code reach the summary, stop a failed scenario harvesting whichever containers happen to hold its names, and keep the daemon's reason for a failure instead of throwing it away.
Testing only, and the merge is textual: every chaos file matches maint byte for byte, and the ci-local divergence on this line does not touch the changed regions.
Compose commands run with their output captured and with check set, so a failure raised a CalledProcessError and nothing ever looked at what the daemon had said. That exception reports the argv and the exit status and nothing else, so every scenario that died bringing its containers up left a runner log saying only that docker compose returned non-zero exit status 1, and the reason was captured and then discarded. In the run that prompted this work twelve scenarios failed that way and why they failed can no longer be established at all. Log the captured stderr and stdout before the error goes anywhere, keeping the tail of each so a verbose failure cannot fill the log file. A command that times out raises before its exit status is ever read, so that path records whatever it had emitted too, rather than leaving the same hole one shape over. Reproduced against both of the shapes this is meant to catch: an unusable network prefix now records the daemon's parse error, and a name already held by another container now records the conflict and names the container holding it. The success path logs nothing new, and a completed scenario's runner log is unchanged line for line.
The raising behaviour is deliberately untouched, since the abort flag and the exit code that came with it depend on it. The check is applied here rather than by subprocess so that a caller who passed check false gets the same record: both such callers are the compose down in teardown, which today can leave a mesh behind without saying so.
The same omission was costing the veth path its reasons. Failing ip commands had their stderr logged at debug, which the runner does not emit unless asked for verbose output, so a failed pair creation reached the log as nothing more than the names of the two interfaces it could not create. Raise that to a warning. The deletes issued to clear a stale pair are expected to fail and still say nothing.
Teardown runs from a finally, so it also runs after a failed setup, and it was guarded only on the topology and the compose file, both of which are set well before any container exists. A scenario that died bringing its containers up therefore ran the whole harvest anyway: final snapshots, docker logs, the analysis, the assertions and the metadata, all addressing containers by names that are global to the host. What it left behind was not an empty directory an investigator would notice but a full and plausible one, in the recorded case ten node logs and an analysis reporting two promotions and two parent switches, every byte of it from a different scenario's mesh. Gate the harvest on whether the containers ever started, and leave the compose down outside that gate so a partly successful start still gets cleaned up.
Record the outcome in a status file in every result directory, naming the run as completed, interrupted, aborted, setup-failed or teardown-failed, alongside the scenario, the seed and the container names it used. With the harvest gated, the presence of an analysis file is now itself proof that the scenario's own mesh existed, and the status file says which of the several ways a run can end applies. A run cut short by a signal keeps the existing exit codes rather than gaining one of its own: what it collected before stopping is real and still worth reporting, the status file records that it was truncated, and every wrapper already reports a Ctrl-C of its own.
Log collection never looked at the status of docker logs. It concatenated stdout and stderr unconditionally, so collecting from containers that were not there wrote the daemon's "No such container" reply into each node log and analysed the result as a mesh with no panics, no errors and no sessions, which reads exactly like a clean run and exits zero. Check the return code, and treat a harvest that cannot read every container, or that reads none, as a failed teardown. A teardown that raises now also reports on the same footing as a run that never started, instead of escaping past the exit codes as a bare traceback and being read as a malformed command line.
The simulation caught every exception a scenario raised, logged it, and exited 0, so a scenario that died during setup was recorded as a pass. Local CI discarded the exit code in any case: run_chaos ends in a call whose own last statement is an echo, so it returned 0 whatever the scenario did, and the parallel launcher's wait therefore always succeeded and always recorded a pass. Between them no chaos failure of any kind could turn a local run red, and none could since the script was written.
Carry the abort out of the run and give it its own exit code, ordered ahead of the two content codes so a run that never produced a mesh cannot report that mesh's panic and assertion counts. Return the scenario's status from run_chaos so the launcher sees it. The documented exit codes were stale before this change and are rewritten in full, including that the argument parser rejects a malformed command line with the same code that reports panics.
Expect scenarios that have been reporting green to start reporting red. In the last recorded local run twelve of the thirteen scenarios never got past starting their containers, and all thirteen were counted as passes; those that now execute have not run for months, and their assertions have never been evaluated against a mesh of their own.
Ethernet edges get a veth pair created in the host namespace and then moved into the containers, named from the node ids alone. ethernet-mesh and ethernet-only both connect n01 to n04 and always run together, so one tore down the other's live link. Hash the scenario suffix to four hex characters and insert those after the vh prefix; 15 characters is far too few to carry the suffix itself.
The names are now run-specific and never regenerated, so the delete-before-create no longer reclaims an interface an earlier run abandoned. ci-cleanup.sh takes over, deriving the names from the suffixes a run's teardown hands it. It is the first thing that script removes that is neither a docker object nor labelled, so an unscoped reap can sever a running bare simulation's links; testing/README.md and the --reap help say so.
Chaos scenarios run four at a time under local CI, but every one of them claimed the container names fips-node-nNN and wrote its generated configs and compose file to the same generated-configs/sim directory. Container names are global in Docker and are not scoped by the compose project, so concurrent scenarios collided on both, and a scenario could start containers from a compose file another had overwritten.
Thread the existing FIPS_CI_NAME_SUFFIX into the simulation. run_chaos narrows the run-wide suffix to the scenario, and the sim reads it once when the topology is built, applying it to the container names and to the config directory basename. The compose template renders the name through the topology accessor instead of duplicating the literal, so one expression produces every chaos container name.
The suffix is empty when the variable is unset, so a bare chaos.sh run and the hosted CI jobs render byte-identical names and paths. Verified by rendering every scenario's compose file before and after with the variable unset and diffing.
The isolation loop and the failure-log dump both built container names
without the run suffix, so under a suffixed run they addressed containers
that do not exist.
The consequence was worse than the visible failure. Two of the three
checks in that loop assert a ping FAILS, and a ping into a non-existent
container fails for the wrong reason - so both passed vacuously, and the
security assertion the loop exists for was silently a no-op. Only the
third check, which expects a ping to succeed, noticed anything was wrong.
Add a guard that fails loudly when the container is absent, so a future
naming slip cannot quietly turn these back into no-ops rather than
surfacing as one confusing failure among two false passes.
These sites were missed because the suite passes when run by hand: with no
suffix set the unsuffixed names are correct, and the defect only appears
under the automation that sets one. Verified this time with the suffix
set, which is the condition that matters: 18 of 18, container names
resolving to real containers.
Making the sidecar network name unique per run exposed a latent problem
rather than causing a new one. With a fixed name, compose found any
existing network and reused it, which quietly masked the fact that the
address range was hardcoded. With a unique name there is nothing to
reuse, so the range is requested every time and the run fails outright if
anything already holds it.
Claim the range instead of assuming it. The suite now tries to create its
network on a candidate range and, if the daemon reports an overlap, moves
to the next candidate. The daemon's own address pool becomes the arbiter,
so two concurrent runs cannot land on the same range at all - as opposed
to a range derived from the run identifier, which only makes a collision
unlikely, and a collision is the precise failure being avoided.
The node addresses are derived from whichever range is claimed rather than
written alongside it, including the gateway address the isolation check
probes. Moved to a range that nothing in the tree claims and that sits
outside the daemon's default pool.
Only an overlap is worth advancing on. Any other creation failure is real
and is reported with the daemon's own message, rather than being retried
sixty-four times and buried - a lesson from a failure elsewhere in the
harness this week that was undiagnosable because its error output was
discarded.
All three nodes now attach to the pre-created network as external, so
teardown removes it explicitly.
Verified: three concurrent claims take three distinct ranges; a
non-overlap error fails fast rather than looping; the suite passes 18/18;
and the claimed gateway address is confirmed pingable when not firewalled,
so the isolation assertions still mean something.
The suite red-ed with an empty final peer_count while every substantive
assertion passed: both denied peers showed inbound handshake attempts and
zero outbound responses, which is the gate this suite exists to verify.
Two pre-existing defects combined. The final count was sampled once, in
the same second the load driver issues its last round of peer restarts, so
the read can land on a daemon busy with those restarts and return nothing.
And the fallback meant to cover that could never fire, because the shell
applies it to the last stage of the pipeline, which succeeds on empty
input - so an unanswered query was indistinguishable from a genuine zero,
and reported as a cap violation.
Poll the final read for a short window instead, and give the two cases
distinct output. A real regression still fails, just after the retry
window, since the loop exits early only on the expected value. Extract the
read the two phases share rather than leaving them to drift.
Two runs on one host destroyed each other's containers, producing
mid-test "No such container" failures that look like real defects. The
automated builder runs a full local CI on the same box every few minutes,
so the machine is contended almost always and this has red-ed both a hand
run and an automated gate.
Two independent causes are fixed here. Container names were hardcoded, and
docker names are global rather than scoped by compose project, so two runs
collided on the same name; every name now takes an optional suffix that
the harness sets from the run id. And the cleanup sweep matched a label
shared by every run, so one run's teardown force-removed another's
containers; resources now also carry a per-run label and the sweep can be
narrowed to it.
A third hazard turned up that was not in the original report: the sidecar
suite passes explicit compose project names, which override the run-scoped
project and put it outside the shared prefix entirely. Its project names,
network, and derived container references are now scoped too.
Both are default-off. With the suffix unset, names render exactly as they
do today and a bare compose invocation is unchanged, which is what keeps
the hosted CI and the documentation correct. A cleanup run with no run id
still reaps everything, which is what a manual "clear the box" wants.
The literal-name sweep was not sufficient: six scripts build container
names dynamically from node labels, and two suites create their own
containers outside compose. Those are handled at their construction sites.
Verified: syntax check on all modified scripts; compose validation on
every modified file with the suffix both set and unset; and a synthetic
two-run reproduction that shows the old cleanup destroying a bystander run
and the new one leaving it alone.
Known gap: subnets are still hardcoded, so two concurrent full runs will
still collide on address-pool overlap. That fix reaches into topology
configs, chaos scenarios, diagrams and production source, so it is left
for its own change rather than half-done here.
The rekey suites' Phase 4 polled until the initiator-cutover count
reached its value at phase entry plus two, while Phase 6 asserts an
absolute minimum of four. On an unloaded host the ping phases can
outrun the jittered first rekey cycle, so Phase 4 can begin with a
single cutover on the books, release at three, and leave Phase 6 to
lose a sub-second race against the remaining first-cycle cutovers.
A rekey-outbound-only run failed exactly this way: five counted
cutover lines by t=32.6s of container life, with the Phase-6 count
snapshot at t~32.4s seeing three.
Floor the Phase-4 wait target at four so a released wait guarantees
the Phase-6 assertion — the docker-logs count is monotone over a
container's lifetime. A genuine rekey stall still times out the
bounded wait and fails Phase 6 with the real count.
Also drop the second-cycle framing from the comment, the phase
banner, and the assertion description: with rekey timers resetting at
each cutover a second cycle cannot begin inside this test's window,
so the counted events are first-cycle cutovers spread across the
topology's links, emitted once or twice per completed link rekey
depending on which side's promotion path logs them.
Phase 4 of the rekey suite waited for only one more initiator cutover
(guaranteeing three) while Phase 6 asserts at least four. The fourth
cutover then had to land in the brief window between the wait returning
and the Phase 6 log snapshot, so host load could push it past the window
and fail the run even though every cutover completed correctly. Wait for
two more cutovers, the full second rekey cycle, matching the Phase 6
threshold, so the asserted count is guaranteed before it is checked.
Determine node health at start completion instead of unconditionally
reaching Running. Zero transports up is now Failed (fatal): start()
tears down cleanly and returns an error, and the daemon exits. Any
configured optional child that failed to start - a transport beyond the
first, Nostr, mDNS, TUN, DNS, or a worker pool - leaves the node
Degraded but serving, with an operator warning naming what failed. All
configured children up is Full. A child the node was never asked to run
does not count against health.
The published NodeState gains Degraded and Failed variants, both visible
via control queries; Degraded is operational, Failed is not. The
lifecycle FSM gains the health states plus the PublishState action that
drives them - a health fork cannot be a single direct state write, which
is why the earlier commits deferred it to here.
Runtime child-exit health re-evaluation (a running child dying) is a
separate liveness-monitoring mechanism left for a follow-up; this commit
is start-time health only.
Reorganize the node module tree by concept rather than by
message-handling verb, as the first step of the node runtime
decomposition. Pure relocation: no wire, config, metric, or log
semantics change; the lib test count is unchanged (1577 passed).
Moves (git mv, 100% rename similarity):
- handlers/{forwarding,rx_loop,connected_udp,dispatch,encrypted}.rs
-> node/dataplane/ — the whole RX hot path (the select! run loop,
transit/local forwarding, the link-message router, the RX decrypt
path with responder K-bit cutover + roam writes, and connected-UDP
fast-path activation) now lives in one home.
- node/session.rs -> node/session/mod.rs — establishes the session
concept home for the data/state types. The message-behavior file
handlers/session.rs stays put for now (folds in with the later FSP
session step).
The IK/XX-divergent establishment files (handlers/{handshake,rekey,
timeout}.rs) and the deferred-home files (handlers/{mmp,lookup}.rs)
deliberately stay in handlers/, to move once rather than twice.
Every module is reached through impl Node methods, so no call site or
re-export shim was needed. Updated in lockstep with the moves: the
module_path!-derived tracing targets in the two mesh-lab compose-trace
overlays, a structural test's include_str! source path, doc-comments
in proto/routing and the mesh-lab docs, and the stale source-location
citations (node/handlers/{forwarding,rx_loop,encrypted}.rs and
node/session.rs) in doc-comments and the discovery design doc.
Rename the Ethernet per-interface config flag from discovery to listen,
so the receive/transmit toggle pair reads as the symmetric announce
(transmit) / listen (receive) neighbor-beacon vocabulary. The old
discovery: key is still accepted via a serde alias, so deployed configs
load unchanged; to_yaml re-emits it under the canonical listen: name.
Marked deprecated for removal at the v2 cutover.
Updates the config field + accessor, the transport listen_enabled local,
the one struct-literal test consumer, the chaos sim config generator,
packaged fips.yaml examples, and the classified operator-facing docs
(ethernet neighbor-beacon subsystem prose; the generic Transport
discovery capability prose is left unchanged). Adds a compat parse test
asserting the legacy alias, the new key, and that deny_unknown_fields
still rejects unknown keys. Behavior-neutral.
Moving the nostr rendezvous engine to src/nostr/ (and mDNS to src/mdns/)
changed the module-path-derived tracing targets from
fips::discovery::nostr::* to fips::nostr::*. Update the RUST_LOG filters
in the NAT and mesh-lab test compose files and the resolve-peers-via-nostr
tutorial's debug recipe to the new targets so trace configs and the
documented journal-watch command keep emitting the intended lines.
Without this, the stun-faults suite's Phase-0 pre-flight (which greps the
daemon journal for the debug-level "STUN observation succeeded" /
"traversal: initiator STUN observed" lines) saw those lines suppressed —
the daemon behaved correctly, but the stale RUST_LOG target hid the
evidence. Test-harness and docs only; no source or behavior change.
Add a "Running CI locally" section to testing/README.md covering the
ci-local.sh orchestrator: the per-run FIPS_CI_RUN_ID override and how it
scopes compose projects, image tags, and per-chaos-child subnets so
simultaneous runs on one host never collide; the cancellation exit codes
(130/143 vs 0/1) and how a preempting worker interprets them; and the
label-based cleanup via --reap / ci-cleanup.sh.
A CI worker may preempt an in-flight ci-local.sh run (SIGTERM, then SIGKILL
after a grace period) to restart on a newer commit. For that kill to be safe,
the script must clean up after itself and never let a dying run collide with
its restart. It previously had no signal handling, shared the default compose
project name across runs, and tore down each suite only at the suite end.
- Derive a per-run id (honoring FIPS_CI_RUN_ID, else short-sha+random) and
namespace every docker resource to it: a fipsci_<run>_<suite> compose project
per suite and per parallel chaos child, and per-run image tags
(fips-test:<run>, fips-test-app:<run>) retagged to :latest only after both
builds succeed so :latest never points at a half-built image.
- Install a bounded, idempotent teardown trap on SIGTERM/SIGINT (+ EXIT): reap
parallel chaos children, then force-remove this run's docker resources via
the new ci-cleanup.sh, wrapped in timeout so a stuck down cannot wedge it.
- Exit 143 (SIGTERM) / 130 (SIGINT), distinct from 0 (pass) / 1 (failed), so a
preempting worker tells a cancelled run from a real failure.
- Add ci-cleanup.sh (also ci-local.sh --reap): force-removes leftover CI
resources by the com.corganlabs.fips-ci=1 label and the fipsci_ project
prefix, robust to however a prior run died.
- Label every per-suite docker resource so the label sweep reaps it after a
SIGKILL regardless of network name: direct docker run/network resources, the
sidecar compose services, and every per-suite compose network (acl-allowlist,
boringtun, firewall, nat, static, both tor suites, and the chaos generator
template). Parametrize the static/sidecar compose image refs so the per-run
tags are honored.
- Give each parallel chaos child a unique /24 from 10.30.x (a new --subnet
override on the sim CLI, assigned per-child in ci-local.sh) so parallel
children never collide on a shared docker subnet, and a chaos net can never
span a fixed-subnet suite (sidecar/static in 172.20.x). 10.30.x sits outside
docker's default-address-pool range, so an auto-assigned net cannot land on
it either; node IPs derive from the subnet, so no scenario config changes.
Replace the fixed post-first-rekey and post-second-rekey settle sleeps in
the rekey integration test, and the fixed-deadline baseline wait in the
interop test, with the deterministic wait_until_connected progress-aware
polling helper already used for the initial baseline convergence.
Each converted site fails fast with structured diagnostics when the mesh
is stuck and extends its deadline only while pairwise reachability is
still climbing, removing the wall-clock settle windows that produced
intermittent connectivity failures after a rekey.
The GitHub deb-install matrix ran debian12/ubuntu24/ubuntu26, but the
local harness (testing/deb-install/test.sh) runs five distros. Add the
missing debian13 (trixie) and ubuntu22 legs so the cloud gate covers the
same distro set as local CI. Each new leg invokes the existing test.sh
scenario, so per-distro behavior is identical to the local run.
Update the granularity-only parity notes in ci.yml, ci-local.sh, and
check-ci-parity.sh to list the full distro set.
The sidecar chain test intends node-a to be a standalone root ("node-a: no
outbound peers"), but started node-a without clearing FIPS_PEER_*, so it
inherited the external peer default from testing/sidecar/.env (a real public
mesh node, test-us01.fips.network) and auto-connected to the live mesh. The
whole a-b-c chain then attached under an external root, inflating tree depth and
breaking test isolation; this also produced spurious multi-hop failures.
Set FIPS_PEER_NPUB/FIPS_PEER_ADDR empty for node-a, matching how node-b and
node-c already get explicit inline peers, so the suite is hermetic regardless of
the .env default. Validated against the unmodified .env: node-a comes up with a
single link to node-b, no external attachment, multi-hop passes 18/18.
wait_until_connected fail-fasted on stall even when the mesh was all but
converged, abandoning the run with budget still unspent because one hard
pair straggled to come up. On the rekey-outbound-only topology this turned a
rare deep-node timing straggle (stacked discovery backoff + late bloom
propagation, which clears well inside the budget) into a false baseline RED.
Add a near_converged_slack threshold (default 2): when the number of
still-failing pairs is at or below the slack and the stall window elapses,
keep polling toward max_secs instead of bailing. A mesh genuinely far from
convergence still fast-bails on stall, and a never-converging pair still
hits the hard cap, so a real regression is never masked.
Add a self-contained behavioral test (wait-converge-test.sh) covering the
four contract cases: near-converged hold (with a slack=0 contrast that
proves the slack is what saves the run), far-from-converged fast-bail,
never-converging hard cap, and four-argument backward compatibility.
The interop harness only tested a full mesh, where every pair is a direct
one-hop FMP link. That left multi-hop forwarding, routing, coordinate
handling, and mesh-size estimation untested across versions.
Add an opt-in multi-hop topology and three new checks:
- generate-configs.sh: FIPS_INTEROP_EDGES selects an explicit undirected
edge list instead of the full mesh, with symmetric peering, connectivity
validation (no isolated node, graph connected), and per-node degree plus
edge metadata in nodes.env. Unset means full mesh, unchanged.
- interop-test.sh: a --topology flag with a built-in multihop-3v-cycle
(six nodes, two of each version, one cycle, two leaves). The per-node
peer check now expects each node's adjacency degree rather than N-1, and
the all-pairs ping now also exercises cross-version forwarding over
non-adjacent pairs. Adds a control-differential data-plane continuity
stream across the rekey window (Phase 5b) and a strict plus/minus 25
percent mesh-size convergence check (Phase 7).
- interop-stress.sh: forward --topology through to the per-rep driver
(mutually exclusive with a positional node-spec).
Phase 1 makes the strict retrying ping authoritative. The convergence
detector (one fully-clean, no-retry sweep of every directed pair) is now an
advisory settle-wait whose timeout is non-fatal; the strict retrying ping
decides pass/fail, matching how the post-rekey phases already work. Under
packet loss a clean no-retry sweep of a large mesh is statistically unlikely
even when the mesh is healthy (30 pairs at 2 percent loss leaves only about
55 percent of sweeps clean), so the detector otherwise falsely failed runs
whose strict ping reported full reachability. CONVERGENCE_TIMEOUT is now
env-overridable and defaults to 90s for larger meshes under loss.
Full-mesh runs are unaffected. Validated end-to-end with the
multihop-3v-cycle topology across three versions: all 30 directed pairs
reachable including multi-hop routed pairs, zero data-plane loss through
both rekey cutovers, and mesh-size converging to the true node count on
every node.
Bring the local runner (testing/ci-local.sh) and GitHub CI into agreement
on two axes.
Suite coverage: the admission-cap integration suite ran only locally, so a
regression in it could never turn the GitHub gate red. Add an admission-cap
leg to the integration matrix, add testing/check-ci-parity.sh (wired as
'ci-local.sh --check-parity') to diff the two suite sets and fail on
unexpected drift, and document the deliberate local-only (live-Tor) and
granularity-only differences in a comment block atop both runners.
Toolchain selection: every CI and packaging job installed its toolchain
with dtolnay/rust-toolchain@stable, but the rust-toolchain.toml channel pin
overrode it for all compilation, wasting an install and printing a
misleading rustc version. Switch the stable call sites to
actions-rust-lang/setup-rust-toolchain, which reads rust-toolchain.toml as
the single source of truth. Keep the explicit cache steps (cache: false on
the new action), set rustflags empty so the action does not impose a global
-D warnings the previous setup never applied, fold the macOS cross-compile
target into the action input, and leave the OpenWrt nightly Tier-3 leg on
dtolnay/rust-toolchain@nightly.
Johnathan Corgan