mirror of
https://github.com/jmcorgan/fips.git
synced 2026-08-09 16:24:45 +00:00
bbd4de9e76d5ba925202c4ef0f207700849be367
69
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Johnathan Corgan
|
bbd4de9e76 |
Merge master into refactor-hotpath-next
Bring master's runtime peer-list refresh, opt-in mDNS LAN discovery, and the receive-path reject-reason / reloadable-config refactor into the XX handshake integration branch. The peer-restart-epoch detection and stale-FSP-session teardown authored against Noise IK are re-authored onto the Noise XX rekey path: complete_rekey_msg2 now also surfaces the remote startup epoch, and the stale session is cleared once the XX rekey completes (after msg3 is sent). Connect-budget and path-refresh work is threaded through the XX anonymous-discovery branch. |
||
 Martti MalmiandJohnathan Corgan
|
7d7b551ca1 |
discovery: add opt-in mDNS LAN discovery
Add scoped mDNS / DNS-SD discovery for peers on the same local link, giving sub-second pairing without a relay or NAT-traversal roundtrip. A node advertises its npub, protocol version, and an optional network scope over link-local multicast, and browses for matching adverts to initiate Noise handshakes against same-LAN peers. LAN discovery is disabled by default; operators enable it with node.discovery.lan.enabled: true. Default-off avoids reintroducing a per-LAN identity broadcast on nodes that have deliberately disabled other discovery channels, and avoids any multicast surprise on upgrade. The startup advertised-port picker now excludes bootstrap transports and selects a non-bootstrap operational UDP transport with a stable lowest-id selector, so the advertised port is deterministic across restarts rather than dependent on HashMap iteration order. This matches the per-dial transport selection used for discovered peers. Co-authored-by: Johnathan Corgan <johnathan@corganlabs.com> |
||
|
Martti MalmiandJohnathan Corgan
|
da0d9d39a0 |
node: refresh active peer paths without dropping links
Add Node::update_peers for runtime peer-list refresh. It re-derives the active peer connections from a new peer configuration, adding newly configured peers and removing those no longer present, while keeping links to peers that remain in the set rather than tearing every connection down. The call returns an UpdatePeersOutcome summarizing the added, removed, and retained peers. PeerAddress gains a seen_at_ms recency field (with_seen_at_ms). Active path selection now sorts address candidates by recency so the most recently observed address wins when concurrent path probes race. complete_rekey_msg2 now returns the remote peer's startup epoch alongside the new Noise session, letting the rekey path detect a peer restart and clear stale session state. A stale FSP session is cleared when a peer restart is detected during FMP rekey or cross-connection promotion, so the session-layer map no longer lingers out of sync with the freshly promoted peer. Per-tick work budgets bound the connection churn in a single node tick (MAX_DISCOVERY_CONNECTS_PER_TICK, MAX_RETRY_CONNECTIONS_PER_TICK, MAX_PARALLEL_PATH_CANDIDATES_PER_PEER); work beyond a tick's budget is deferred to the next tick rather than discarded. Co-authored-by: Johnathan Corgan <johnathan@corganlabs.com> |
||
|
Johnathan Corgan
|
05124367db | Merge master into next (outbound admission gate + mesh-size parent skip) | ||
|
Johnathan Corgan
|
6991a152e6 |
Merge maint into master (outbound admission gate + mesh-size parent skip)
Brings two structural fixes landed on maint: - compute_mesh_size: explicit parent skip in the children loop, so the disjoint-subtree invariant no longer depends on peer_declaration cache freshness. - max_peers: outbound connection-initiation gated on the cap (auto-reconnect retries, Nostr-mediated discovery established adoption, and both sides of the NAT-traversal punch sequence). Inbound msg1 admission gate unchanged. |
||
|
Johnathan Corgan
|
d4687e5d30 |
node: gate outbound connection initiation on max_peers
node.limits.max_peers was honored only on inbound msg1 admission (handshake.rs handle_msg1 returns PeerLimitExceeded when peers.len is at the cap). Four outbound initiation paths proceeded unconditionally at capacity: auto-reconnect retries (process_pending_retries), Nostr-mediated discovery's BootstrapEvent::Established adoption (poll_nostr_discovery), NAT-traversal punch initiation (the outgoing side of the offer/answer/punch sequence in the Nostr discovery runtime), and NAT-traversal punch response (the incoming side of the same sequence). A saturated node burned CPU, UDP probes, STUN observations, and Nostr relay traffic on connections that the inbound gate would reject the moment they reached msg1. Introduce Node::outbound_admission_check (peers.len < max_peers, or true when max_peers == 0 as the no-cap sentinel) and gate the four paths. The discovery runtime lives in a separate task and does not hold a Node reference; bridge via an Arc<AtomicBool> the runtime reads and Node refreshes once per tick from outbound_admission_check. The atomic granularity is intentionally loose: one-tick lag is acceptable because the inbound msg1 gate continues to be the authoritative cap, and in-flight handshakes started below the cap are allowed to complete. Inbound gate at handshake.rs is unchanged. |
||
|
Johnathan Corgan
|
49735980b8 | Merge master into next (cross-init tiebreaker + tick-arm connect-on-send fix) | ||
|
Johnathan Corgan
|
5dfbd05fe8 | Merge maint into master (cross-init NAT-traversal tie-breaker) | ||
|
Johnathan Corgan
|
f396d71826 |
node: deterministic tie-breaker for cross-init NAT traversal adoption
When both peers' Nostr-mediated UDP punches complete within the same scheduling window, each side's `BootstrapEvent::Established` event arrives with `is_connecting_to_peer` already true: each side received an inbound msg1 from the peer's pre-punch outbound attempt, which created a connecting-state record. The deduplication skip then fires on both sides, neither installs the fresh traversal socket as canonical, and the peer-adoption budget (45 s) expires. Cross-node wall-clock alignment of the skip log line in observed failures was within ~1 ms — simultaneous dual- fire under contention, the dual-initiation pattern. Apply the deterministic NodeAddr tie-breaker already used at `handlers/handshake.rs:269` for rekey dual-initiation and in `peer::cross_connection_winner` for cross-connection resolution. Smaller NodeAddr wins as adopter: enumerate the in-flight connections whose `expected_identity` points at this peer, tear them down via the canonical `cleanup_stale_connection` helper, and fall through to `adopt_established_traversal`. Larger NodeAddr loses and keeps the existing `continue` semantics; the loser's in-flight outbound is reconciled by `handle_msg1`'s cross- connection logic when the winner's fresh msg1 arrives over the adopted socket. `cleanup_stale_connection` visibility bumped from module-private to `pub(in crate::node)` so it is callable from `lifecycle.rs`. The defensive re-check inside `adopt_established_traversal` itself is left as-is — after the outer cleanup the winner reaches it with `is_connecting_to_peer == false`, so the inner skip won't trip. The `BootstrapEvent::Failed` arm is unchanged: there is no winning outcome on dual failure, and the existing skip + retry-schedule semantics are correct. |
||
|
Johnathan Corgan
|
d6729086de |
Merge master into next (data-plane perf overhaul, packaging fixes)
Forward-merges PR #91 (off-task encrypt/decrypt worker pools, GSO,
connected UDP), the macOS #102 package-integrity fix, and the AUR
#98 fips-dns fix from master.
Six textual conflicts resolved: wire/noise imports, the K-bit-flip
and rekey-cutover handlers, ActivePeer fields, and an advert test
fixture. One semantic conflict: PR #91's worker-pool code on master
referenced FLAG_SP and MmpPeerState.spin_bit, which next removed in
|
||
|
Martti MalmiandJohnathan Corgan
|
0a5c367edc |
data-plane perf overhaul: off-task encrypt + decrypt, GSO, connected UDP
Moves both AEAD layers (ChaCha20-Poly1305, one round per layer per packet) plus the sendmsg syscall off the rx_loop task onto a per-shard worker pool, adds per-peer connect(2)-ed UDP with SO_REUSEPORT, and uses Linux UDP GSO (sendmsg+UDP_SEGMENT — kernel splits one super-skb into N on-the-wire datagrams in a single TX-stack walk) when packets in a batch are uniform-size. Same kernel primitive WireGuard's in-kernel module and BoringTun use to hit 2.5–3.2 Gbps single-stream. Single TCP stream on a 5-node docker-bridge mesh, 5 x 15 s x P=1: A→D: 1379 → 2708 Mbps (1.96x, RTT +0.12 ms) A→E: 1394 → 2663 Mbps (1.91x, RTT +0.11 ms) E→A: 1406 → 2624 Mbps (1.87x, RTT +0.19 ms) Static-peer pairs only — every CoV under 3%, 0 outliers, 0% ICMP loss. The ~+100 µs RTT is the worker queue handoff cost; AEAD + sendmmsg now run on a separate core in exchange. What lands: - src/node/encrypt_worker.rs: std::thread + crossbeam_channel workers; hash-by-destination dispatch pins a TCP flow to one worker so wire ordering is preserved; per-worker sendmmsg(2) batching up to 32; Linux uses sendmsg(2)+UDP_SEGMENT when packets in a group are uniform-size. - src/node/decrypt_worker.rs: receive-side mirror. Each shard owns its session's recv cipher + replay window in a thread-local HashMap (no shared RwLock/Mutex). Sessions are handed off at promote_connection and re-registered on K-bit flip / rekey cutover. - src/node/handlers/session.rs try_send_session_data_pipelined: FSP+FMP both seal in-place in the worker on one wire-buffer alloc; no intermediate inner_plaintext / fsp_payload Vecs. - src/transport/udp/connected_peer.rs + peer_drain.rs: per-peer connect(2)-ed UDP socket with SO_REUSEPORT (set on the listen socket too — without that, EADDRINUSE on activation and every packet falls back to the wildcard path); the worker sends with msg_name=NULL and the kernel uses its cached 5-tuple. Tick- driven activation in handlers/connected_udp.rs, idempotent. - src/transport/udp/mod.rs: mem::replace the recvmmsg backing buffer instead of buf.to_vec() per packet — single pointer swap, no MTU-sized memcpy. - src/protocol/link.rs SessionDatagramRef: zero-copy borrowed view used by handle_session_datagram for the bulk local-delivery path; handle_session_payload takes the borrowed payload directly (no payload[35..].to_vec()). - src/transport/mod.rs TransportAddr::from_socket_addr: collapses the two-alloc from_string(addr.to_string()) pattern to one. - src/node/handlers/rx_loop.rs: decrypt-fallback drain promoted ahead of packet_rx in the select! (TCP ACK starvation fix); interleaved fallback drain every 32 packets inside the rx burst loop. - noise::Session: send_cipher_clone / recv_cipher_clone / recv_replay_snapshot_owned / take_send_counter / accept_replay so off-task workers can hold a cloned cipher + reserved counter while the dispatcher keeps replay/counter sequencing serial. CipherState::cipher_clone returns a refcount-bumped LessSafeKey. AsyncUdpSocket: AsRawFd so workers issue raw sendmmsg / sendmsg without going through the tokio reactor. - Worker pool sizing: both default to num_cpus, overridable via FIPS_ENCRYPT_WORKERS=N / FIPS_DECRYPT_WORKERS=N. Per-peer connected UDP can be disabled via FIPS_CONNECTED_UDP=0. - src/perf_profile.rs: optional per-stage timing reporter under FIPS_PERF=1 (or FIPS_PIPELINE_TRACE=1). Off by default; zero overhead when disabled. - All cfg(unix)-gated. Windows continues on the existing tokio- based send/recv. Decrypt worker session lifecycle: - Node::unregister_decrypt_worker_session mirrors the existing register helper. Wired at the two natural sites that already iterate peers_by_index: the rekey drain-completion block in handlers/rekey.rs (drops the worker entry for the old our_index once the drain window has expired and the cache_key is unreachable to any in-flight OLD-K packet), and remove_active_peer in handlers/dispatch.rs (drops the worker entry for each of the four index slots: current, rekey, pending, previous). Only our_index is normally registered; unregister_session is fire- and-forget for missing entries, so calling unconditionally on all four slots is correct and bounds the cleanup without per- slot accounting. Without these callers the per-worker sessions HashMap and the Node's decrypt_registered_sessions set would grow monotonically per rekey on long-lived peers. Testing: - testing/static/scripts/bench-multirun.sh: multi-run iperf3 + ping bench. N reruns (default 5), median / min / max / CoV % / per-run outlier flag, avg ping RTT, ICMP loss %, TCP retransmit total. Plain client→dest labels + topology header. Pre-bench peer-convergence check (FIPS_BENCH_CONVERGE_SECS, default 15); per-path route verification via stats.bytes_sent deltas — fails fast if traffic exits via a non-static-peer link. - testing/static/docker-compose.yml: passes FIPS_ENCRYPT_WORKERS / FIPS_DECRYPT_WORKERS / FIPS_PERF through to containers for A/B benchmarking without rebuilds. - testing/static/scripts/iperf-test.sh: same plain client→dest labels + topology header (was multihop/direct/N hop, which conflated topology distance with on-wire path). - .config/nextest.toml: synthetic UDP node tests serialized through a max-threads=1 test group. Localhost handshakes drop on shared CI runners under parallel load; one-at-a-time keeps assertions reliable. - src/node/tests/spanning_tree.rs: repair_missing_edge_handshakes — retries up to 5 times for synthetic edges whose msg1 was dropped, with a drain after each edge retry instead of after each attempt's full burst. - src/node/decrypt_worker.rs::tests: two unit tests asserting WorkerMsg::UnregisterSession removes the worker-thread session HashMap entry (handle_msg_unregister_session_removes_entry) and is a no-op for never-seen cache_keys (handle_msg_unregister_session_idempotent_on_unknown_key), which is the safety invariant the unconditional unregister calls at the four index slots in remove_active_peer rely on. - src/node/encrypt_worker.rs::unix_tests pipelined_send_wire_layout_roundtrips_canonical_decoders: mirrors the encoder geometry of try_send_session_data_pipelined (no coords, the common established-session path), runs the worker's real seal + send via flush_direct_batch_sync, and decodes the resulting wire packet using only canonical receive-side decoders (EncryptedHeader::parse, SessionDatagramRef::decode, FSP header parse, noise::open). Any divergence between the hand-rolled encoder offsets (fsp_aad_offset, fsp_plaintext_offset) and the decoders fails at one of the parse / open / decode steps before the inner-plaintext assertion fires. Complements the existing fsp_preseal_runs_before_outer_fmp_seal test which covers the seal-ordering invariant with synthetic headers but does not exercise the wire-layout invariant. CHANGELOG.md [Unreleased] # Changed entry added describing the worker-pool threading model, hash-by-destination dispatch, sendmmsg/UDP_GSO, per-peer connected UDP, the operator-facing env vars, and the bench numbers above. Cherry-picks from mmalmi/master (paths translated from crates/fips-core/src/ to src/): 9b7c723, 0deb5cb, 13f7339, e036c0e, 3740a68, 3792f83, 8510193, 4910b07, e53f545, e4e2896, 5fe4af5, 1d01ada, 8c37008, e12469e, 6eb2860. Co-authored-by: Johnathan Corgan <johnathan@corganlabs.com> |
||
|
Johnathan Corgan
|
c80b3eb0e3 |
Merge master into next (coord cache surgical invalidation)
# Conflicts: # CHANGELOG.md |
||
|
Martti MalmiandJohnathan Corgan
|
87d1af0269 |
nostr: ignore stale traversal for active peers
Skip BootstrapEvent::Established and BootstrapEvent::Failed dispatch in poll_nostr_discovery for peers that are already connected or actively handshaking. Without these guards, stale traversal events arriving after a peer connected through a different path would either attempt to adopt a redundant socket against the live connection (Established) or poison the per-peer failure-state cooldown and trigger redundant retraversal via schedule_retry / try_peer_addresses (Failed). The four guard sites use a new is_connecting_to_peer helper extracted from the existing closure inside initiate_peer_connection; the helper checks for an in-flight outbound handshake state. adopt_established_traversal gains a defense-in-depth check returning PeerAlreadyExists when called against an already-promoted peer, so the invariant holds if a future caller bypasses the outer dispatch guard. Side benefit: narrows a cooldown-poisoning vector previously available to an attacker injecting stale failure events for an active peer. Test coverage for the new behavior: - test_try_peer_addresses_skips_connected_peer - test_try_peer_addresses_skips_connecting_peer - test_nostr_traversal_failure_skips_connected_peer (Failed-arm event injection) - test_nostr_traversal_established_skips_connected_peer (Established-arm event injection, mirror of the Failed test) - test_adopted_traversal_skips_already_connected_peer (adopt_established_traversal defense-in-depth) CHANGELOG entry under [Unreleased] / Fixed. Closes #87 |
||
|
Johnathan Corgan
|
dd65951244 |
Merge branch 'master' into next
# Conflicts: # src/node/tests/bootstrap.rs |
||
|
2d18d019d6 |
Evict stale overlay advert when retry hits NoTransportForType
The advert cache inside fetch_advert is read-only on hit — once a peer's overlay advert is cached, every subsequent lookup returns the same endpoints regardless of whether they still work. So when a peer rebinds its NAT (or its STUN-discovered port flaps), connection retries to that peer dial the same dead address forever, even with exponential backoff firing at the right cadence. Observed in deployment: macOS daemon's view of a Linux peer would "regress" — peer marked rch=False after a brief link-dead window, then hours of "Retry connection initiation failed: no operational transport for any of <npub>'s addresses" with no recovery. Manual pause+resume of the daemon (which restarts the FIPS endpoint and forces fresh advert fetches) was the only way out. When initiate_peer_connection / a retry tick returns NodeError::NoTransportForType, fire-and-forget refetch_advert_for_stale_check on the peer's npub. This re-fetches kind 37195 from advert_relays; if the relay has a newer advert it replaces the cached entry, if it has nothing it evicts the cached entry. Either way the next retry tick goes to fresh data instead of looping on the same dead endpoint. Mirrors the existing stale-advert sweep that runs from the BootstrapEvent::Failed (NAT-traversal-streak) path, but covers the direct-UDP-retry path which never crosses that streak threshold. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> |
||
|
|
64cc30df12 |
Schedule retry on startup peer-init failure
When initiate_peer_connections() runs at boot, address resolution can fail for an entire peer (no operational transport for the configured transport types, all addresses unreachable, NAT rebind invalidated cached endpoints, etc.). Before this change the failure was logged and silently forgotten — the peer entry stayed in a dead state forever, accepting incoming pings but unable to answer them, until the daemon was manually restarted. The retry plumbing (schedule_retry / process_pending_retries with exponential backoff) already exists and is wired into the post-handshake failure paths (BootstrapEvent::Failed, MMP dead-link timeout, handshake timeout). The startup loop just wasn't calling it. Mirror the BootstrapEvent::Failed path: on a startup peer-init error, parse the peer's npub and call schedule_retry so the peer recovers without operator intervention. Includes a regression test that asserts retry_pending is populated when initiate_peer_connections() fails for a peer with no operational transport. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> |
||
|
Martti MalmiandJohnathan Corgan
|
f0bb29ff6e |
node: inherit primary UDP config when adopting NAT-traversal sockets
`Node::adopt_established_traversal` was constructing the adopted UDP transport with `UdpConfig::default()` — MTU 1280, default recv/send buffer sizes, default accept/advertise flags. If the operator had configured a higher MTU on the primary `[transports.udp]` listener (e.g. 1500 on a path where larger frames are known viable), full-sized tunnel datagrams sent over the NAT-traversed link would exceed the adopted socket's MTU and get dropped at the socket layer with no visibility into why throughput collapsed. Inherit the primary UDP config (MTU + recv/send buffer sizes + accept / advertise flags) and clear the bind / external-address fields since the adopted socket is already bound. Lookup tries `transport_name` first so operators with multiple named `[transports.udp.<name>]` listeners pick up inheritance from the matching listener, and falls back to the unnamed `Single` listener so single-instance configs work unchanged. The previous default of MTU 1280 was deliberately the IPv6 minimum, the only value guaranteed to survive arbitrary middlebox paths. With this change, operators who set their primary listener higher (based on known-clean LAN topology) will have NAT-traversed flows initially attempting that higher MTU and possibly black-holing on tighter paths until reactive `MtuExceeded` recovery kicks in. Documented in the adoption call-site comment so future readers understand why the conservative default went away. Discovered in a downstream consumer where a `MESH_TUNNEL_MTU=1320` / encrypted wire ~1426B produced silent packet drop on every session that had been promoted onto a NAT-traversed link. Adds two sibling tests in `src/node/tests/bootstrap.rs` pinning the new behaviour for the `Single` and `Named` config variants. |
||
|
Johnathan Corgan
|
acb750c0d2 | Merge branch 'master' into next | ||
|
Johnathan Corgan
|
a62a0a6cf4 |
nostr: suppress retraversal of cross-FMP-version peers
Open-discovery NAT traversal succeeds at the UDP layer regardless of what FMP-protocol version the peer speaks. When the daemon discovers a peer running a different FMP version (e.g. a v0/v1 mix during a mid-rollout window, or a misconfigured peer in the same advert namespace), the punch sequence completes, the socket is adopted via `Node::adopt_established_traversal`, and we initiate an FMP handshake. The peer drops our msg1 at its own version-gate and we drop their msg1/msg2 at `Unknown FMP version, dropping`. Neither side advances the handshake. Today the bootstrap transport sits idle until the 31s stale- handshake timeout, drops, and the open-discovery sweep ~30s later fires the full STUN+offer+answer+punch sequence again — every minute, indefinitely, against peers the handshake literally cannot complete with. Add a `Node::bootstrap_transport_npubs` map populated alongside `bootstrap_transports` at adopt time. The rx loop reverse-maps the transport_id → npub on version-mismatch and bumps the discovery layer's `failure_state` to a long structural cooldown via the new `NostrDiscovery::record_protocol_mismatch` API. The next sweep skips the npub for `protocol_mismatch_cooldown_secs` (default 86400 = 24h, separate from the 30-min transient-failure `extended_cooldown_secs`). One-shot WARN per fresh observation. Repeat mismatches inside the cooldown window are silent (the failure_state method returns false when an existing comparable cooldown is already in place). The handshake/transport teardown chain is unchanged — the fix is specifically about preventing the *next* sweep cycle from re-traversing. Cleared on `cleanup_bootstrap_transport_if_unused` and on the adopt-failure rollback path so completed handshakes don't leave stale entries behind. Four new unit tests in `failure_state.rs` cover fresh-entry signaling, repeat-suppression inside the window, streak-pin behavior for `show_peers` rendering, and post-cooldown re-arming. |
||
|
Johnathan Corgan
|
60a4353661 | Merge branch 'master' into next | ||
|
Johnathan Corgan
|
2f95929862 |
nostr: public-IP discovery for UDP/TCP advert publication
When a UDP transport had `advertise_on_nostr: true` + `public: true` + `bind_addr: 0.0.0.0:NNNN`, the advert builder previously read the kernel's `local_addr()`, found `0.0.0.0`, filtered it out (correctly — wildcard isn't a valid advertised endpoint), and silently emitted no UDP endpoint in the published advert. Operators on AWS EIP / GCP / Azure setups (where binding to the public IP directly is impossible because 1:1 NAT does the address translation off-host) had no way to advertise UDP without binding to a specific local IP — and no log explaining what was happening. TCP had the same shape, with no `public: true` precondition. Three pieces, layered. UDP gets zero-config autodiscovery via STUN; both UDP and TCP get an explicit operator-supplied override; the fall-through path now logs loudly instead of silently skipping. UDP public-IP autodiscovery (STUN) ---------------------------------- In the UDP `is_public()` + wildcard-bind branch, run a one-shot STUN observation against an ephemeral UDP socket on the daemon's configured `stun_servers`. Take the reflexive IPv4 (the STUN-reported port is the ephemeral source port and is discarded), combine with the configured listener port for the advert (`udp:<reflexive-ip>:<port>`). Works on AWS EIP / GCP / Azure 1:1-NAT setups because STUN sees the public-Internet egress IP and the bind port is preserved through 1:1 NAT. Result is cached per-transport on a new `public_udp_addr_cache` field on `NostrDiscovery` (keyed by `TransportId.as_u32()`). Asymmetric cache TTL: a successful observation is cached for `advert_refresh_secs` (default 30 min) so we don't STUN every refresh tick. A failed observation is cached for only 60s (`PUBLIC_UDP_ADDR_FAILURE_TTL`) so a transient STUN flake at startup retries within ~a minute and the advert grows its UDP endpoint as soon as STUN starts working — rather than waiting the full 30-min cycle. The shared `observe_traversal_addresses` STUN helper had a hard-coded 2s per-server response wait, right for the per-traversal flow (latency-sensitive — 3 STUN servers worst-case = 6s) but too short for the one-shot advert-publish startup discovery. Parameterized `per_server_timeout` on the helper, with two named constants in `stun.rs`: `TRAVERSAL_STUN_TIMEOUT = 2s` (existing call sites) and `ADVERT_STUN_TIMEOUT = 5s` (new public-UDP discovery path). Both use `tokio::time::timeout_at` under the hood, so success returns immediately — the timeout is only the worst case. `external_addr` override (UDP + TCP) ------------------------------------ New `external_addr: Option<String>` field on `transports.udp.*` and `transports.tcp.*` for explicit advertise-as override. Takes precedence over both the bound `local_addr` and (for UDP) the STUN-derived autodiscovery. Required for TCP on cloud-NAT setups (AWS EIP, GCP/Azure external IPs) where binding to the public IP directly fails with `EADDRNOTAVAIL` because the public IP isn't on a host interface — the network fabric does 1:1 NAT off-host. Without this field the operator's only TCP path was "leave advert off" or "find a way to make the public IP locally bindable." For UDP, `external_addr` is optional but useful as a deterministic alternative to STUN. Operators who want to skip STUN egress, whose STUN servers are blocked, or who want the daemon to not depend on external services for advert content can specify it explicitly. The accessor parses two shapes: - Bare IP (`"54.183.70.180"` or `"2001:db8::1"`): combines with the configured `bind_addr` port. - Full host:port (`"54.183.70.180:8443"` or `"[2001:db8::1]:443"`): used verbatim — useful for port-forward setups where the externally-visible port differs from the bind port. Final precedence in `Node::build_overlay_advert` (now async, only caller `refresh_overlay_advert` was already async): - UDP: `external_addr` → non-wildcard `local_addr` → STUN → loud warn - TCP: `external_addr` → non-wildcard `local_addr` → loud warn Loud warns instead of silent skips ---------------------------------- The wildcard-bind fall-through paths now log a `warn!` pointing at the operator-side fixes: - UDP: "set transports.udp.external_addr, bind to a specific public IP, or ensure node.discovery.nostr.stun_servers is reachable" - TCP: "Either set external_addr to the public IP (recommended for cloud 1:1-NAT setups) or bind explicitly to the public IP" Replaces the silent skip that previously cost operators a debugging session when the advert mysteriously contained only the Tor onion endpoint. Tests ----- 11 new unit tests in `src/config/transport.rs` covering the parser (IPv4/IPv6, bare/full, malformed) and the accessor (UDP with default bind, UDP with explicit port override, UDP unset, TCP without bind_addr, TCP with bind_addr, TCP with full socket-addr override, parse_bind_port for IPv4/IPv6/malformed). The 38-test nostr suite still passes. CHANGELOG entries under `[Unreleased]` Fixed. |
||
|
Johnathan Corgan
|
bcc9c525d3 |
nostr: per-peer NAT-traversal failure suppression and clock-skew handling
Public-test daemons with populous open-discovery caches generate
sustained NAT-traversal-failure WARN volume (~140/hour, ~3500/day)
against cache-learned peers that have gone offline — their adverts
are absent from major Nostr relays but cached entries persist until
their advertised `valid_until` expires. The daemon kept publishing
offers indefinitely under exponential backoff with no per-peer
suppression, drowning operator signal and hammering relays. A
parallel concern: the strict freshness check at signal.rs silently
rejected offers under modest clock skew (now_ms() anchors to
SystemTime once at startup, so post-startup NTP step adjustments
don't propagate on long-uptime daemons), indistinguishable from
"peer is offline."
Six independent improvements layered on the existing retry logic.
Per-npub WARN log rate-limit
----------------------------
New `FailureState` struct on `NostrDiscovery` records per-npub
`last_warn_at_ms`. Subsequent failures inside `warn_log_interval_secs`
(default 5 min) emit DEBUG instead of WARN. Each WARN now also
carries `consecutive_failures` and remaining `cooldown_secs` so
operators can read the trajectory without grepping multiple lines.
Per-npub consecutive-failure counter + extended cooldown
--------------------------------------------------------
After `failure_streak_threshold` (default 5) consecutive failures
against a peer, the next `extended_cooldown_secs` (default 1800)
of attempts are suppressed by pushing
`retry_pending[npub].retry_after_ms` past the cooldown wall. The
open-discovery sweep also consults `cooldown_until` and increments
a new `skipped_cooldown` counter so a peer whose `retry_pending`
was cleared by max_retries doesn't get re-enqueued during the
cooldown window. Caps offer-publish rate per dead peer regardless
of how often the sweep tries to re-enqueue.
Stale-advert eviction on streak-threshold transition
----------------------------------------------------
On the threshold-crossing transition (one-shot, not every
subsequent failure), `tokio::spawn` an active re-fetch of the
peer's Kind 37195 advert from `advert_relays`. Three outcomes:
- absent on relays → cache evicted; sweep won't re-enqueue
(peer is genuinely gone).
- newer `created_at` → cache refreshed + streak reset
(peer republished; allowed to retry immediately).
- same → cache untouched; cooldown stands.
Cost: ~one fetch per dead peer per 30-min cooldown cycle, vs
hundreds of offer publishes/hour today.
Clock-skew tolerance on freshness check
---------------------------------------
`signal.rs` `validate_offer_freshness` and
`validate_traversal_answer_for_offer` now allow ±60s grace beyond
strict TTL. Both return a new `FreshnessOutcome` enum so callers
can DEBUG-log when an offer/answer was only accepted via the grace
window. `FRESHNESS_SKEW_TOLERANCE_MS` is hard-coded — loosening
this past minutes erodes the freshness/replay security boundary
and operators tend to tune in the wrong direction.
NTP-style skew estimate (offer_received_at echo)
------------------------------------------------
Added optional `offerReceivedAt: Option<u64>` field to
`TraversalAnswer` payload. Responder fills it with `now_ms()` at
offer-receipt time. Initiator computes the standard NTP offset
formula `((T2-T1) + (T3-T4)) / 2` against the round-trip and
DEBUG-logs when `|skew| ≥ 30s`. Skew is also stashed in
`FailureState` and surfaced in `show_peers`. Non-breaking — older
responders that don't fill the field still produce valid answers,
and `estimate_clock_skew` returns `None`.
Per-peer state in `show_peers` JSON
-----------------------------------
Each peer entry in `show_peers` now carries:
"nostr_traversal": {
"consecutive_failures": <u32>,
"in_cooldown": <bool>,
"cooldown_until_ms": <u64 | null>,
"last_observed_skew_ms": <i64 | null>
}
Always emitted (schema-stable); values populated when discovery is
enabled and the npub has a recorded entry. Required a new public
`Node::nostr_discovery_handle()` accessor and refactored
`FailureState`'s internal Mutex from `tokio::sync` to `std::sync`
(operations never hold across await), which lets the synchronous
`show_peers` handler call `snapshot()` directly without the
dispatcher becoming async.
New config knobs (under `node.discovery.nostr`)
-----------------------------------------------
failure_streak_threshold: 5
extended_cooldown_secs: 1800
warn_log_interval_secs: 300
failure_state_max_entries: 4096
Tests
-----
12 new unit tests:
- 5 in `tests.rs` covering freshness strict / tolerated / rejected
outcomes, NTP skew estimation, and the backward-compat None case
when the responder didn't fill `offer_received_at`.
- 7 in `failure_state.rs` covering streak/warn-rate-limit state
transitions, cooldown active vs expired semantics,
success-resets-streak, observed-skew records, and size-cap
eviction by oldest `last_failure_at`.
CHANGELOG entries added under `[Unreleased]` Fixed.
|
||
|
Johnathan Corgan
|
4457587e5f |
Merge branch 'master' into next
# Conflicts: # src/node/tests/discovery.rs # testing/ci-local.sh |
||
|
Johnathan Corgan
|
e08f42e3cc |
Pin discovery state machine: open-discovery sweep + per-attempt lookup timeout
Cover two adjacent runtime behaviors in the discovery state machine
that were previously unpinned at the test level.
1. Open-discovery startup sweep iterate-filter-queue contract.
Cover the runtime sweep behavior: iterate advert cache, apply
skip-filters (own-pubkey, already-connected peers), queue eligible
entries to retry_pending. The config layer was tested but the sweep's
own filtering logic was unpinned.
src/discovery/nostr/runtime.rs: add #[cfg(test)] impl block with
three pub(crate) helpers — new_for_test() builds a minimal
NostrDiscovery with empty cache and no relays/background tasks (uses
fresh nostr::Keys signer + Client::builder().autoconnect(false));
cached_advert_for_test() wraps an OverlayEndpointAdvert into a
CachedOverlayAdvert valid for 1h; insert_advert_for_test() writes
direct to the advert_cache RwLock. All three vanish from release
builds via cfg-gating.
src/node/lifecycle.rs: visibility-only widen on
run_open_discovery_sweep from private async fn to
pub(in crate::node) async fn so the in-tree test can drive it
directly. Same pattern as already-pub(in crate::node) handlers in
src/node/handlers/.
src/node/tests/discovery.rs: add #[tokio::test]
test_open_discovery_sweep_queues_eligible_skips_filtered. Builds
Node + Arc<NostrDiscovery>, injects 3 adverts (eligible, already-
connected peer, own-pubkey), invokes the sweep, asserts retry_pending
contains exactly the eligible entry with matching peer_config npub
and the two filtered entries do NOT appear.
2. Per-attempt timeout state machine in check_pending_lookups.
Cover the central new behavior of
|
||
|
Johnathan Corgan
|
b02eaf2c5b |
Merge branch 'master' into next
Forward-merges the squashed per-destination TCP MSS clamping work (master `ae60743`) into next. Auto-merge of source files clean. Two pre-existing test assertions on the next-side discovery tests were updated as part of merge resolution to reflect the target-edge MTU fold introduced by the merged-in commit: - test_transit_forwards_when_mtu_sufficient: 1400 → 1280 = min(target-edge 1280, transit 1400) - test_response_path_mtu_four_node_chain: 1350 → 1280 = min(target-edge 1280, transits 1350+1500) Resulting next tree is bit-for-bit identical to the pre-squash next state previously verified by full local CI sweep (29 + 1 next-only suites pass on `6a8b519` in 23m 41s). |
||
|
Johnathan Corgan
|
ae607431eb |
Per-destination TCP MSS clamping at the TUN boundary
Adds source-side TCP MSS clamping informed by per-destination path MTU learned via discovery, with a conservative IPv6-minimum-derived ceiling for cold flows where discovery has not yet completed. Closes the multi-hop default-config TCP wedges observed in production where a sender's local-floor MSS exceeds what some intermediate forwarder hop is willing to carry: silent drops, no PTB feedback through the userspace TUN to the kernel TCP stack, retransmits at the same too- large MSS, application connection times out. ## Architecture A new `Arc<RwLock<HashMap<FipsAddress, u16>>>` field `path_mtu_lookup` on Node mirrors the per-destination path MTU in a form accessible from sync TUN reader/writer threads. A new `per_flow_max_mss` helper in `src/upper/tun.rs` reads the lookup at SYN-clamp time and returns the appropriate ceiling for the flow. Three write sites populate `path_mtu_lookup`: 1. **Discovery originator branch** of `handle_lookup_response`: the path MTU bottleneck accumulated through the reverse path lands here when a LookupResponse arrives at the originator. Same value also lands in `coord_cache` per the existing `insert_with_path_mtu` API. 2. **FMP peer-promotion seed** (`seed_path_mtu_for_link_peer`): when an FMP link-layer peer is promoted to active, the local outgoing-link MTU on the peer's transport seeds the lookup. Tighter existing values (learned via discovery) are preserved; the seed only writes when no entry exists or the existing value is looser than the link MTU. Without this seed, directly-configured peers (auto_connect / static peer config) would leave `path_mtu_lookup` empty for their FipsAddress because the FSP session establishes without ever issuing a LookupRequest. 3. **Target-edge fold at `send_lookup_response`**: when a node is the discovery target, it folds its own outgoing-link MTU to the response's next-hop into `path_mtu` before sending. Without this fold, the response leaves the target with `path_mtu = u16::MAX` and only intermediate transits min-fold; the target's first reverse-path hop is never represented in the bottleneck calculation. Refactored the existing transit- side min-fold into a shared `apply_outgoing_link_mtu_to_response` helper called from both sites. ## Read-side: per_flow_max_mss Two TUN call sites consume the lookup: - Outbound `handle_tun_packet` clamps SYN MSS using packet[24..40] (IPv6 destination) as the lookup key. - Inbound `TunWriter::run` clamps SYN-ACK MSS using packet[8..24] (IPv6 source). When the lookup contains a learned value, the helper computes `min(global_max_mss, effective_ipv6_mtu(path_mtu) - 60)` where 60 is IPv6 (40) + TCP (20) headers and `effective_ipv6_mtu` accounts for the FIPS encapsulation overhead. When the lookup is empty for a destination — the cold-flow case — the helper returns `min(global_max_mss, IPv6-minimum-derived ceiling)`. RFC 8200 mandates every IPv6 path accept ≥1280-byte packets, so the IPv6-minimum-derived MSS (1280 - 77 - 60 = 1143) fits any compliant path. Without this conservative ceiling, the first SYN to a destination with no learned path MTU exits the TUN at the kernel-natural MSS (TUN MTU - 60), and the application connection wedges silently before discovery completes for a corrected second SYN to fire. The fix is provably safe: the ceiling is taken with `min` against the local global so operators with even tighter local floors are never loosened upward. Subsequent flows pick up the actual learned per-destination value once discovery (or the FMP-promotion seed for direct peers) populates the lookup. ## Diagnostic logging All write and read sites emit instrumentation suitable for operators bisecting a wedged path: - `debug!` log on every `path_mtu_lookup` write (discovery originator path and FMP-promotion seed path), showing the FipsAddress, written value, prior value, and post-write map size. `warn!` on poisoned-lock failure path. - `trace!` log per `per_flow_max_mss` call covering every fall-through branch (wrong addr_bytes length, non-fd::/8 prefix, lookup poisoned, no entry for destination, empty-lookup conservative ceiling) and the success path. trace level filters out under normal log settings; capture with `RUST_LOG=info,fips::node::handlers::discovery=debug,fips::upper::tun=trace`. ## Tests 15 new unit tests across 3 files: - `per_flow_max_mss` (8 tests in `src/upper/tun.rs::tests`): empty-lookup conservative ceiling, empty-lookup global-smaller floor, learned-value-overrides-conservative, per-destination smaller, per-destination larger capped by global, non-fips addr, short addr slice, per-destination independence. - `seed_path_mtu_for_link_peer` (4 tests in `src/node/tests/unit.rs`): seed when empty, keep tighter existing, tighten looser existing, no-op for unknown transport. - Discovery integration (3 tests in `src/node/tests/discovery.rs`): apply_outgoing_link_mtu_to_response on unknown peer no-op, two-node target-edge fold (path_mtu reflects target-edge link), three-node chain transit min-fold (existing test, updated for target-edge inclusion). Two pre-existing discovery tests had assertions updated to account for the target-edge fold: - `test_response_path_mtu_two_node`: previously asserted `u16::MAX` (no transit to min-fold); now asserts 1280 (the test transport MTU, folded in by send_lookup_response). - `test_response_path_mtu_four_node_chain`: previously asserted 1350 (transit MTUs only); now asserts 1280 (target-edge MTU is the bottleneck). - `test_transit_forwards_when_mtu_sufficient`: previously asserted 1400 (transit MTU only); now asserts 1280 (target- edge MTU is the bottleneck). ## Verification Local CI on this commit: 29/29 suites pass, 1105 lib tests pass, clippy --all-targets --all-features -D warnings clean, cargo fmt clean. Production deploy verified via trace capture across the managed fleet: cold-flow conservative ceiling branch fires on first SYN, learned-lookup branch takes over once discovery completes, both behaviors observable end-to-end at the SYN MSS on the wire. No wire-format change. No config-format change. |
||
|
Johnathan Corgan
|
e7fc4f7d10 | Merge branch 'master' into next | ||
|
Johnathan Corgan
|
da5d23ccb7 |
Document nostr-nat ephemeral UDP transport MTU choice
Adopted ephemeral UDP transports created by adopt_established_traversal() default to UdpConfig::default() (MTU=1280, IPv6 minimum) when the bootstrap runtime hands a socket without an explicit transport_config override. This is by design: NAT-traversal middlebox MTU is unpredictable and the IPv6 minimum is the only value guaranteed by spec to survive arbitrary paths. Add an explanatory comment at the call site so future readers find the rationale without spelunking through ISSUE-2026-0013, and so any future change to the inheritance behavior is a deliberate decision rather than an accidental refactor. No behavior change. |
||
|
Johnathan Corgan
|
ab2edec2c6 |
Add Nostr open-discovery startup sweep with diagnostic logging
Under `node.discovery.nostr.policy: open`, the per-tick auto-dial in `queue_open_discovery_retries` was supposed to pick up adverts cached from the relay subscription backlog at startup, but in practice only adverts arriving live (after the daemon was up) were being dialed. Backlog adverts sat in the in-memory cache until they aged out. Adds a one-shot startup sweep that runs once per daemon start, gated identically to the per-tick sweep (`enabled` && `policy == open`), after a configurable settle delay so the relay subscription backlog has time to populate the advert cache. The sweep iterates the cache with the same skip-filters as the per-tick path (statically-configured peers, already-connected, retry-pending, connecting) plus a tighter age filter: only adverts whose `created_at` is within `startup_sweep_max_age_secs` of now are queued. Two new config fields under `node.discovery.nostr`: - `startup_sweep_delay_secs` (default 5) - `startup_sweep_max_age_secs` (default 3600 = one hour) Both are only consulted when `policy == open`; under any other policy the sweep is a no-op. Adds diagnostic logging to the open-discovery sweep so operators can verify what the auto-dial path is doing on each daemon bring-up: info-level on each retry-queued enqueue (with peer short-npub and advert age), and a one-line summary on every startup sweep and on any per-tick sweep that queues at least one retry. The summary breaks down skipped candidates by reason (age, configured, self, already-connected, retry-pending, connecting, no-endpoints, invalid-npub) — currently the path was silent so there was no operator-visible signal that the cache iteration was running. Refactors the existing `queue_open_discovery_retries` body into a shared `run_open_discovery_sweep(max_age_secs, caller)` helper so the per-tick and startup paths share filter/queue logic and only differ in the age filter and log label. Surfaces `created_at` from `NostrDiscovery::cached_open_discovery_candidates` (return tuple extended) so the age filter has the data it needs. Three new unit tests in `config::node::tests` cover the new defaults, YAML override round-trip, and partial-YAML default fallback. |
||
|
Johnathan Corgan
|
239cbdc4ba |
Fix Tor onion adverts missing port in Nostr overlay discovery
The Nostr overlay advert publisher serialized `transport: tor` endpoints as a bare `<onion>.onion` hostname with no port. The Tor address parser requires `<host>:<port>` form and rejected the bare shape with `expected host:port`. Any peer receiving a Tor-only advert went into a persistent retry-fail loop on jittered backoff until the advert aged out of the discovery cache. The bug had been latent for as long as Tor adverts have been published on Nostr, and was masked in deployments where every node also advertised a non-Tor transport (peers fell through to the working endpoint). Surfaced first on a deployment where Tor was the only advert path. Publisher now emits `<onion>.onion:<port>` using a new `transports.tor.advertised_port` config field that defaults to 443, matching the Tor `HiddenServicePort 443 127.0.0.1:<bind_port>` convention. Operators whose torrc uses a non-default virtual port can override. Adds a unit test that pins the publisher/parser contract: formats the advert exactly as the publisher does and asserts `parse_tor_addr` accepts the result; asserts the bare-onion form (the bug) does not parse, catching any future regression that drops the port again. Parser is unchanged (already correct). |
||
|
Johnathan Corgan
|
5317735a91 |
Merge branch 'master' into next
# Conflicts: # src/node/tests/handshake.rs # testing/ci-local.sh |
||
|
Johnathan Corgan
|
e641eb5b5f |
Drop the nostr-discovery cargo feature flag
Make Nostr-mediated overlay discovery unconditional, mirroring the philosophy of PR #79's collapse of the tui/ble/gateway features in favor of platform cfg gates. nostr / nostr-sdk are pure Rust over WebSockets/TCP, so they build cleanly on every FIPS-supported platform — there is no need for the parallel feature gate. The flag was already in `default = [...]`, so no behavior change for anyone using `cargo build` without `--no-default-features`. Operators who explicitly disabled the feature will now find Nostr code present in the binary; the runtime check `node.discovery.nostr.enabled` still controls whether the runtime starts. Cargo.toml: - Remove the `[features]` table entirely. - Drop `optional = true` from `nostr` and `nostr-sdk`. Source: 27 cfg sites collapsed across 5 files — `src/discovery.rs`, `src/discovery/nostr/mod.rs`, `src/node/handlers/rx_loop.rs`, `src/node/lifecycle.rs`, `src/node/mod.rs`. Two `#[cfg(not(feature = "nostr-discovery"))]` fallback blocks (the udp:nat-without-runtime debug-log path and the "feature not compiled in" warning at startup) were removed as dead code; the always-on path already handles the missing-runtime case via `nostr_discovery: Option<NostrDiscovery>`. Packaging and tooling: - `packaging/openwrt-ipk/Makefile`: drop a stale `--features gateway` flag (the `gateway` feature was already removed in PR #79; this was a leftover that the build path tolerated only because cargo ignored unknown feature names). - `testing/scripts/build.sh`: drop `DEFAULT_CARGO_BUILD_ARGS=(--features nostr-discovery)`; defaults are empty. - `packaging/common/fips.yaml`: drop the "requires the nostr-discovery feature" comment from the discovery section. Bundled cleanup: - Apply `cargo clippy --fix` against three pre-existing warnings in `src/discovery/nostr/runtime.rs` and `src/discovery/nostr/stun.rs` (collapsed `if let Some` chain; two redundant `as i32` casts). These were always present but masked when the feature gate was off; they surface now that the code is unconditionally compiled. - `cargo fmt` settled two minor formatting drift sites in `src/bin/fips-gateway.rs` and `src/config/mod.rs`. Tests: 1083 passed, 0 failed, 4 ignored. clippy clean. fmt clean. |
||
|
Johnathan Corgan
|
9c35c7e55d | Merge branch 'master' into next | ||
|
Johnathan Corgan
|
bf77ececad |
Fix DNS responder silent-drop on systemd-resolved deployments
The previous default configured systemd-resolved with `resolvectl dns fips0 [<fips0_addr>]:5354`, intended to bypass an Ubuntu 22 systemd 249 interface-scoping bug. That target collides with the daemon's mesh-interface filter on Linux: when an IPv6 packet's destination belongs to a non-loopback interface, the kernel attributes the packet to that interface in IPV6_PKTINFO (ipi6_ifindex == fips0) even though loopback delivery is used (tcpdump shows lo). The mesh-interface filter sees arrival_ifindex == mesh_ifindex and silently drops every query at trace level — invisible to operators at the default debug level. Net effect on stock deployments: every .fips query on systemd-resolved hosts was silently dropped. Daemon side ----------- - Default `dns.bind_addr` changes from "::" to "::1" (IPv6 loopback only). The mesh-interface filter is then defanged on the default path because loopback isn't reachable from mesh peers. The filter remains in place defensively for operators who explicitly bind "::" to expose a mesh-reachable responder. fips-dns-setup backend unification ---------------------------------- - New `try_global_drop_in` backend writes /etc/systemd/resolved.conf.d/fips.conf with DNS=[::1]:5354 and Domains=~fips. Inserted ahead of `try_resolvectl` in the dispatch chain. The standard loopback path has no interface scoping, so ipi6_ifindex reports lo and the filter passes. - All other backends now target [::1]:5354 to match the daemon's default IPv6-loopback bind: - try_dns_delegate writes DNS=[::1]:5354 - try_dnsmasq writes server=/fips/::1#5354 - try_nm_dnsmasq writes server=/fips/::1#5354 - Fixed dns-delegate file path: was /etc/systemd/dns-delegate/, must be /etc/systemd/dns-delegate.d/ (with .d suffix). systemd-resolved silently ignored the previous path. - fips-dns-teardown handles the new global-drop-in backend in cleanup. - The legacy resolvectl per-link backend stays as a fallback, documented to require careful daemon bind_addr coordination. fips-gateway upstream pairing ----------------------------- - gateway.dns.upstream default changes from 127.0.0.1:5354 to [::1]:5354 to match the daemon's default bind. Linux IPv6 sockets bound to explicit ::1 do not accept v4-mapped traffic, so the old default would have caused the gateway's startup DNS reachability probe to time out and systemd to restart-loop the service. - Operators who set a non-default daemon `dns.bind_addr` must also set `gateway.dns.upstream` to match — documented inline. Documentation ------------- - packaging/common/fips.yaml and packaging/openwrt-ipk fips.yaml examples updated; rationale for the bind_addr choice and the daemon/gateway pairing recorded inline. Test coverage ------------- - testing/dns-resolver/test.sh: real-fipsd end-to-end scenario added. Builds fipsd in a Debian 12 builder image (cached), runs the daemon with a real TUN in a privileged container, configures DNS via the setup script, and asserts `dig @127.0.0.53 AAAA <npub>.fips` returns AAAA. Refactored as a parameterized helper running across Debian 12/13 and Ubuntu 22/24/26 (5 e2e scenarios). Backend-aware assertions: on systemd >= 258 the expected backend is dns-delegate; on older systemd it's global-drop-in. Strict content checks fail CI on any [::1]:5354 drift. fips-gateway also exercised in the debian12 scenario to lock the gateway-upstream pairing. Renamed all "fipsd" references to "fips" (project convention). - testing/deb-install/ (new harness): builds the actual .deb via cargo-deb in a Debian 12 builder image (cached), installs via apt across each target distro, verifies maintainer scripts, conffile placement, binary placement, and end-to-end .fips resolution after start. Also exercises fips-gateway against the installed daemon to verify the gateway/daemon default pairing on a real .deb path. - This is the test layer that was missing — the previous harness only verified config files were written, never that queries reached the daemon. Verified: dns-resolver 78/78 assertions, deb-install 55/55 assertions across all 5 distros (debian:12, debian:trixie, ubuntu:22.04, ubuntu:24.04, ubuntu:26.04). |
||
|
Johnathan Corgan
|
5a5dbe36da |
Merge branch 'master' into next
# Conflicts: # src/node/lifecycle.rs # testing/static/scripts/rekey-test.sh |
||
 
|
34e00b9f6e |
Add Nostr-mediated overlay discovery and UDP NAT traversal (#53)
Optional peer discovery and NAT hole-punching path gated behind a new
`nostr-discovery` cargo feature. Nodes publish signed overlay endpoint
adverts to public Nostr relays, consume peer adverts to populate
fallback dial addresses, and use STUN-assisted UDP hole punching with
NIP-59 gift-wrap offer/answer signaling to establish direct UDP paths
between NATed peers. Once a punched socket is up, it is handed into
the existing FIPS UDP transport and the standard Noise/FMP session
stack takes over unchanged.
The cargo feature is in the default feature set
(`default = ["nostr-discovery"]`) so stock builds include it; a
build that explicitly disables default features (or selects a
feature set without `nostr-discovery`) does not link the nostr /
nostr-sdk crates and does not emit a no-op poll in the tick loop.
Runtime behavior is independently gated by
`node.discovery.nostr.enabled`, which defaults to false; if the
config enables Nostr on a non-feature build, startup logs a
warning and continues without it.
== Cargo feature and dependencies
- New cargo feature `nostr-discovery = ["dep:nostr", "dep:nostr-sdk"]`.
Not in the default feature set.
- New optional Linux-only dependencies: `nostr 0.44` (features: std,
nip59) and `nostr-sdk 0.44`. Gift-wrap unwrap is hand-rolled in
`src/discovery/nostr/signal.rs` rather than relying on the SDK's
rumor-author check, which FIPS sidesteps by trusting `seal.pubkey`
exclusively.
== Wire format
Overlay advert event: `kind 37195`, parameterized replaceable
(NIP-01 application-defined replaceable range 30000-39999), with
`d = "fips-overlay-v1"`. The digits visually spell FIPS (7=F, 1=I,
9=P, 5=S); a relay survey confirmed the kind is unused.
Advert content carries the version tag, endpoint list
(`udp|tcp|tor` + addr), optional signal-relay and stun-server
metadata, and `issuedAt` / `expiresAt` timestamps. Endpoint
`addr: "nat"` is the sentinel that triggers traversal on the peer
side. NIP-40 `expiration` tag bounds staleness on permanent
shutdown. Lifecycle relies on parameterized-replaceable
supersession; the daemon does not emit NIP-09 kind-5 deletes —
strict relays (Damus, Primal) race delete-against-replace and can
silently drop the replacement.
Gift-wrapped signal event: `kind 21059`. Punch packets carry magic
values `PUNCH_MAGIC` / `PUNCH_ACK_MAGIC`, a sequence number, and a
16-byte session hash.
== Discovery surface
- `src/discovery.rs` (always compiled)
- `EstablishedTraversal`: bound UDP socket + selected remote +
peer npub + optional transport name/config tuning overrides.
- `BootstrapHandoffResult`: returned on successful handoff —
allocated transport id, local/remote addrs, peer NodeAddr,
session id.
- `src/discovery/nostr/` (`#![cfg(feature = "nostr-discovery")]`)
- `types.rs`: wire and control types described above. `ADVERT_KIND`
constant. `BootstrapError` enumerates failure modes (disabled,
missing advert, missing NAT endpoint, no usable relays, invalid
advert, invalid npub, signal timeout, punch timeout, replay,
STUN failure, protocol, nostr, io, serde, event-parse).
- `runtime.rs`: `NostrDiscovery` coordinator. Owns the shared
nostr-sdk `Client`, subscribes to advert + signal event kinds,
maintains a bounded advert cache and a bounded seen-sessions
replay set, drains `BootstrapEvent::{Established, Failed}` for
the node to consume, exposes `update_local_advert`,
`request_connect`, `advert_endpoints_for_peer`,
`cached_open_discovery_candidates`, and `shutdown`.
- `signal.rs`: NIP-59 gift-wrap encode/decode. Outbound wraps are
built against per-attempt ephemeral keys; inbound events are
unwrapped against the node identity.
- `stun.rs`: RFC 5389/8489 Binding Request client with
XOR-MAPPED-ADDRESS parsing for both IPv4 and IPv6; used only to
observe the initiator's own reflexive address against its
locally configured STUN list (peer-advertised STUN is
informational, never an egress target).
- `traversal.rs`: per-attempt candidate-pair punch planner.
Allocates a fresh `0.0.0.0:0` UDP socket per attempt, enumerates
LAN-private and ULA interface addresses alongside the STUN
reflexive address, schedules probe/ack exchanges at the
configured interval for the configured duration, and picks the
first candidate pair that authenticates end-to-end.
Strategy ordering is Reflexive↔Reflexive first, then LAN, then
Mixed. The STUN-observed pair is the only candidate that's reliable
across arbitrary network topologies; trying it first prevents the
planner from latching onto a misleading host-candidate path before
the reflexive path gets a chance. There is no catch-all
Local↔Local strategy: a previous design that paired every local
host candidate from one side with every local host candidate from
the other could declare success on a one-way reachable asymmetric
L3 path (corporate VPN, Tailscale subnet route, overlapping private
address space), only for the FMP handshake to stall because the
return path didn't match. The legitimate `Lan` strategy still pairs
candidates that share a subnet.
== Configuration surface
`node.discovery.nostr.*` (`NostrDiscoveryConfig`), all `serde(default)`
with `deny_unknown_fields`:
- `enabled` (default false), `advertise` (default true)
- `advert_relays`, `dm_relays`, `stun_servers`: defaults are
`wss://relay.damus.io`, `wss://nos.lol`, `wss://offchain.pub`
for both relay lists, and Google / Cloudflare / Twilio for STUN.
Operators are expected to override for production. Other
verified-working public relays for reference:
`nostr.bitcoiner.social`, `nostr-pub.wellorder.net`,
`nostr.oxtr.dev`, `nostr.mom`.
- `app` (default `"fips-overlay-v1"`), `signal_ttl_secs` (120)
- `policy`: `NostrDiscoveryPolicy::{Disabled, ConfiguredOnly (default),
Open}` — controls whether advert-derived endpoints are consumed
only for peers carrying `via_nostr = true`, or also for
non-configured peers within a budget cap.
- `share_local_candidates` (default false) — when false, the offer's
`local_addresses` list is empty and peers see only the reflexive
address. Enable per-node only for genuinely same-LAN deployments;
off-by-default eliminates the misleading-path failure mode for
the common case where peers are not on the same broadcast domain.
- `open_discovery_max_pending` (64) — caps queued open-discovery
retries; bounded by available outbound slots.
- `max_concurrent_incoming_offers` (16) — semaphore against offer
spam; excess offers are debug-logged and dropped.
- `advert_cache_max_entries` (2048) and `seen_sessions_max_entries`
(2048) — bound memory under ambient relay volume; overflow
evictions are debug-logged.
- `attempt_timeout_secs` (10), `replay_window_secs` (300)
- `punch_start_delay_ms` (2000), `punch_interval_ms` (200),
`punch_duration_ms` (10000)
- `advert_ttl_secs` (3600), `advert_refresh_secs` (1800)
Per-peer and per-transport flags:
- `PeerConfig.via_nostr: bool` — when true (and Nostr is enabled),
advert-derived addresses are appended as fallback dial candidates
after static addresses for that peer.
- `PeerConfig.addresses` is now `serde(default)` and may be empty
when `via_nostr: true`; validation requires at least one of the
two to be present per peer, and the error message names the
peer's npub.
- `UdpConfig.advertise_on_nostr: Option<bool>` and
`UdpConfig.public: Option<bool>` — UDP transports can be
advertised either as direct `host:port` (public = true) or as the
`addr: "nat"` sentinel that triggers rendezvous on the peer side.
- `TcpConfig.advertise_on_nostr` and `TorConfig.advertise_on_nostr`
— TCP and Tor onion endpoints can be advertised as directly
reachable.
- A reserved peer address `transport: udp, addr: "nat"` parses without
special-casing in YAML and routes through the bootstrap runtime.
Cross-field validation (`Config::validate`, called from `Node::new`
and `Node::with_identity`):
- Any transport with `advertise_on_nostr = true` requires
`node.discovery.nostr.enabled = true`.
- Any peer with `via_nostr = true` requires
`node.discovery.nostr.enabled = true`.
- A non-public UDP advert (`advertise_on_nostr = true`,
`public = false` — i.e. `udp:nat`) additionally requires at least
one `dm_relay` and at least one `stun_server`.
Surfaced as `ConfigError::Validation`.
== Node integration
`src/node/lifecycle.rs` is the main integration point.
- At node start (after transports are up, before TUN), if Nostr is
enabled and the feature is compiled in, `NostrDiscovery::start` is
invoked, the initial local overlay advert is built from the live
transport set and published, and the runtime handle is stored.
- The rx tick loop calls `poll_nostr_discovery` (feature-gated both
at method definition and call site), which refreshes the local
advert, drains bootstrap events, adopts established traversals,
schedules retries for failed traversals, and — under `policy:
open` — enqueues outbound retries for non-configured peers
visible in the advert cache, bounded by
`open_discovery_max_pending` and the remaining outbound slots.
- Outbound peer dialing is refactored to `try_peer_addresses`, which
first exhausts the static address list in priority order and only
then appends advert-derived fallback addresses; both lists run
through the same `attempt_peer_address_list` code path. The
`udp:nat` sentinel address triggers `NostrDiscovery::request_connect`
for the peer instead of a direct dial and returns `Ok(())`.
- `build_overlay_advert` walks operational transports, consults
per-instance `UdpConfig` / `TcpConfig` / `TorConfig` (matching by
optional transport instance name), and emits an `OverlayAdvert`
including `signalRelays` and `stunServers` when any UDP endpoint
is advertised as NAT.
- `adopt_established_traversal` is the bootstrap handoff API:
allocates a new `TransportId`, constructs a `UdpTransport` with
the user-supplied (or default) `UdpConfig`, calls the new
`adopt_socket_async` to reuse the punched socket verbatim,
registers the transport in the normal transport map, records it
in `bootstrap_transports`, and calls `initiate_connection` so the
normal handshake path runs. On failure, the transport is stopped
and removed cleanly and the set membership is rolled back.
- On clean shutdown, `NostrDiscovery::shutdown` is awaited so
background tasks stop before transports are torn down. (The
advert is not explicitly retracted; NIP-40 expiration plus the
next refresh from any live publisher supersedes it.)
New `Node` fields:
- `nostr_discovery: Option<Arc<NostrDiscovery>>` (feature-gated).
- `bootstrap_transports: HashSet<TransportId>` — per-peer UDP
transports adopted from NAT traversal, cleaned up via
`cleanup_bootstrap_transport_if_unused` whenever the link,
connection, peer, or pending-connect referencing them is removed.
Retry and error surface:
- `RetryState.expires_at_ms: Option<u64>` — optional absolute expiry
for a retry entry. `pump_retries` drops expired entries with an
info log. Used for open-discovery retries, which expire at two
times the advert TTL.
- New `NodeError::BootstrapHandoff(String)` returned from
`adopt_established_traversal` when the underlying transport
adoption fails or local address discovery fails.
- New `ConfigError::Validation(String)`.
- A small refactor extracts `Node::now_ms()` and reuses it across
lifecycle, rx-loop tick, and timeout bookkeeping.
== UDP transport
`src/transport/udp/`:
- `UdpRawSocket::adopt(std::net::UdpSocket, recv_buf, send_buf)`:
adopts an externally bound socket, makes it non-blocking, applies
the configured buffer sizes (warning if the kernel clamps), and
reports the resulting local address. Preserves the NAT mapping —
no rebind.
- `UdpTransport::adopt_socket_async(std::net::UdpSocket)`: the
`start_async` analogue for an already-bound socket, wiring the
async socket and recv task exactly as the fresh-bind path would.
- `Drop` impl for `UdpTransport`: if a transport is dropped while
still holding a recv task or socket (for example on error
teardown), aborts the task, clears the socket, and emits a debug
log so the cleanup is visible in tracing rather than silent.
== Logging and observability
Default `EnvFilter` demotes third-party relay-pool DEBUG output to
TRACE-only: `nostr_relay_pool`, `nostr_sdk`, and `nostr` are pinned
at INFO when our level is anything below TRACE, and at TRACE when
our level is TRACE — so the raw frames are still reachable when
explicitly asked for. RUST_LOG continues to override completely.
Concise one-line DEBUG events are emitted at the meaningful points
in the discovery / hole-punch sequence:
- `advert: published` (event id, relay count, endpoints, ttl)
- `advert: peer cached` (notify-loop ingress for non-self)
- `advert: resolved` (cache hit / relay fetch outcome)
- `traversal: initiator starting`
- `traversal: initiator STUN observed` (reflexive, local count)
- `traversal: offer sent` (session id, relay count, event id)
- `traversal: answer received` (accepted, reflexive, local)
- `traversal: initiator punch succeeded` (remote addr)
- `traversal: offer received` (responder side)
- `traversal: responder STUN observed`
- `traversal: answer sent`
- `traversal: responder punch succeeded`
Npubs are shortened to `npub1<4>..<4>` and event/session ids to
their first 8 hex characters.
Other operator-facing logs:
- `UdpTransport` adoption and drop paths log at info / debug.
- `adopt_established_traversal` logs at debug on entry and info on
successful return, tagged with peer npub, session id, transport
id, and both socket endpoints, so the bootstrap handoff is
traceable end-to-end alongside the `UdpTransport::drop` log.
- `cleanup_bootstrap_transport_if_unused` logs at debug when the
reference-count check drops an adopted transport.
- `connect_peer` tags its entry `debug!` with `peer_npub` so
downstream STUN, punch, and handshake logs for the same peer
correlate for operators.
- Advert-cache and seen-sessions overflow evictions log at debug so
mis-sized caps are visible under ambient relay volume.
- Gift-wrap unwrap failures on `SIGNAL_KIND` events log at trace
(hot path: fires for every unrelated signal event on the same
relay).
- Traversal-offer handler failures log at debug. Expected conditions
such as punch timeout on symmetric NAT are covered there; real
problems are reported upstream via `BootstrapEvent::Failed`.
- Inbound-offer rate-limit messages name the governing config field
(`max_concurrent_incoming_offers`) and state that the offer was
rate-limited rather than failing.
== Tests
- 18 new unit tests in `src/discovery/nostr/tests.rs` covering advert
encoding, signal envelope round-trip, STUN parsing, punch-packet
codec, and replay-window enforcement. Run under the
`nostr-discovery` feature.
- Config-validation tests in `src/config/mod.rs` covering the three
cross-field invariants and YAML parsing of the full
`node.discovery.nostr` block plus `peers[].via_nostr`, empty
`addresses` with `via_nostr: true`, and a `udp: nat` address.
- `src/node/tests/bootstrap.rs` integration tests that drive a
synthetic traversal (bound UDP socket pair + synthetic peer
identity) through `adopt_established_traversal` and assert the
Noise handshake completes over the adopted socket.
- Punch-planner tests assert reflexive-before-LAN ordering and that
same-LAN scenarios still include the LAN target in the plan.
- `testing/nat/` Docker NAT lab harness:
- Local `strfry` relay, local STUN responder, and one or two
router containers performing `iptables` NAT.
- Node LAN interfaces are provisioned with explicit `veth` pairs
injected into the node and router namespaces so every packet
traverses the router namespace (plain Docker bridges are not
used for the LAN).
- `cone` scenario: both peers behind full-cone-emulation NAT
(SNAT with source-port preservation, inbound DNAT back to the
single LAN host regardless of remote source); asserts UDP
traversal succeeds and link remote addresses are on the router
WAN subnet.
- `symmetric` scenario: `MASQUERADE --random-fully`; asserts UDP
traversal fails and TCP fallback converges over router-
published WAN addresses.
- `lan` scenario: both peers share a LAN subnet; asserts LAN
addresses are preferred over reflexive ones.
- Cleanup tears down all profile-gated services
(`--profile cone --profile symmetric --profile lan`) so no
orphan containers survive a run.
- `testing/scripts/build.sh` builds the Docker test image with
`--features "tui nostr-discovery"` by default so NAT-harness
binaries include bootstrap support.
== CI
- Linux release build and nextest unit-test job both use
`--features "gateway nostr-discovery"` so the feature-gated code
and its unit tests compile and run in CI.
- Three new integration matrix entries (`nat-cone`, `nat-symmetric`,
`nat-lan`) invoke `testing/nat/scripts/nat-test.sh`, collect
`docker compose logs` on failure, and always stop containers.
== Packaging and operations
- `packaging/common/fips.yaml` ships a fully commented
`node.discovery.nostr.*` block, plus documented
`advertise_on_nostr` / `public` examples under the UDP transport,
an `advertise_on_nostr` example under TCP, and a `via_nostr: true`
example under the static peer section with both a direct
`host:port` UDP address and a `udp: nat` fallback.
- `.github/workflows/package-openwrt.yml`: NIP-94 release event
publishes target the new default relay set.
== Documentation
- `README.md`: overlay discovery + NAT traversal moved from
"Near-term priorities" into "What works today".
- `docs/design/fips-intro.md`: rewrites the paragraphs that
previously described Nostr discovery and NAT traversal as future
work; describes the shipped mechanism and the feature gate.
- `docs/design/fips-transport-layer.md`: drops the "(future
direction)" qualifier from the Nostr Relay Discovery section,
expands with the `udp:nat` advertisement and bootstrap handoff
description, and updates the Current State callout.
- `docs/design/fips-mesh-layer.md`: notes that mid-session NAT
rebinding (roaming) and initial NAT traversal (Nostr path) are
distinct mechanisms.
- `docs/design/fips-configuration.md`: documents the full
`node.discovery.nostr.*` surface, including the three resource
caps and `share_local_candidates`.
- `docs/design/fips-nostr-discovery.md`: design and configuration
reference for the shipped mechanism, including the empty-
`addresses`-with-`via_nostr` shorthand.
- `docs/proposals/nostr-udp-hole-punch-protocol.md`: adds an
Implemented status callout, clarifies that the punch socket is
per-peer and per-attempt rather than shared with the application
listener, aligns field names with the shipped JSON
(`sessionId`, `issuedAt` / `expiresAt`, `reflexiveAddress`,
`localAddresses`, `stunServer`), sets the `d`-tag to
`fips-overlay-v1`, names the kind as 37195, and notes that
advertised STUN entries are informational.
- `docs/proposals/README.md`: adds a Status column and marks the
hole-punching proposal Implemented.
- `CHANGELOG.md`: Unreleased > Added entry covering the discovery
path, STUN/punch path, configuration surface, and Docker NAT lab.
Co-authored-by: Johnathan Corgan <johnathan@corganlabs.com>
|
||
|
Johnathan CorganandGitHub
|
cbc78091ab |
Rationalize cargo feature and platform-gate surface (#79)
Drop the `tui`, `ble`, and `gateway` cargo features and replace them with platform cfg gates. Plain `cargo build` now produces every subsystem appropriate for the target platform with no feature flags required. Motivation: - `default = ["tui", "ble"]` broke `cargo build` on macOS and Windows because `ble` pulled in `bluer` (BlueZ, Linux-only). Every non-Linux packager needed `--no-default-features`. - The feature flags on `ble` and `gateway` were redundant with their platform-gated deps (`bluer`, `rustables`). The parallel gating was inconsistent and error-prone. - `tui` feature protected against a ratatui binary-size concern that no longer applies in 2026. Cargo.toml: - Remove `tui`, `ble`, `gateway` features; `default = []`. - Promote `ratatui` to a non-optional top-level dependency. - Move `rustables` from top-level optional into the Linux target block, non-optional. - Split `bluer` into its own target block with `cfg(all(target_os = "linux", not(target_env = "musl")))` — BlueZ isn't available on musl router targets and `libdbus-sys` doesn't cross-compile to musl without pkg-config sysroot setup. - Drop `required-features` from the `fipstop` and `fips-gateway` `[[bin]]` entries. build.rs: - Emit a `bluer_available` custom cfg when `target_os == "linux"` and `target_env != "musl"`, for use in place of the verbose full predicate in source cfg gates. Source: - Replace every `#[cfg(feature = "gateway")]` with `#[cfg(target_os = "linux")]`. Gateway code works on both glibc and musl Linux (rustables is fine on musl). - Replace every `#[cfg(feature = "ble")]` with `#[cfg(bluer_available)]`. BLE-specific code (BluerIo module, bluer type conversions, BLE transport instance creation, resolve_ble_addr) is excluded on musl and non-Linux. Generic `BleAddr`, `BleIo` trait, `MockBleIo`, and `BleTransport<I>` still compile on all targets. - `src/bin/fips-gateway.rs`: always compiled, but `main()` is gated to Linux. Non-Linux stub exits 1 with a diagnostic. Existing non-Linux packaging scripts don't ship it, so the stub binary sits unused. Packaging and CI: - Drop `--features` and `--no-default-features` flags from every packaging script and workflow. Defaults now match each platform's capabilities. - AUR `fips-git` automatically aligns with stable `PKGBUILD` (both build with defaults). Verified: `cargo build --release` with no flags produces all four binaries on glibc Linux; all unit and integration tests pass across Linux/macOS/Windows/OpenWrt (musl) in CI. |
||
|
Johnathan Corgan
|
bcb87165fa | Merge branch 'master' into next | ||
|
Johnathan CorganandGitHub
|
ed312ac6f2 |
Fix DNS resolution on Ubuntu 22 with systemd-resolved (#77)
On Ubuntu 22 (systemd 249), systemd-resolved applies interface-scoped routing to per-link DNS servers. Configuring `resolvectl dns fips0 127.0.0.1:5354` caused resolved to attempt reaching 127.0.0.1 through fips0 (a TUN with only fd00::/8 routes), silently failing. The DNS responder never received queries. Newer systemd versions (250+) have explicit handling for loopback servers on non-loopback interfaces. Changes: - DNS responder default bind_addr changed from "127.0.0.1" to "::" so it listens on all interfaces, including fips0. Bind logic in lifecycle.rs now parses bind_addr as IpAddr and constructs a SocketAddr, handling IPv6 literal formatting. Factored into Node::bind_dns_socket with explicit IPV6_V6ONLY=0 via socket2, so IPv4 clients on 127.0.0.1:5354 still reach the responder regardless of the kernel's net.ipv6.bindv6only sysctl. - fips-dns-setup resolvectl backend now waits for fips0 to have a global IPv6 address, then configures resolved with [<fips0-addr>]:5354. That address is locally delivered by the kernel regardless of which interface resolved tries to route through. The dnsmasq and NetworkManager backends still use 127.0.0.1 (they don't have the interface-scoping issue). - Dropped hardcoded `bind_addr: "127.0.0.1"` from the packaged fips.yaml (Debian + OpenWrt). The shipped config was overriding the new default. - DNS queries are only accepted from the localhost. Verified end-to-end in a privileged Ubuntu 22.04 systemd container: dig @127.0.0.53 AAAA <npub>.fips resolves cleanly through systemd-resolved. The dns-delegate backend (systemd 258+) still uses 127.0.0.1; it has not been verified whether that backend has the same routing issue. |
||
|
Johnathan Corgan
|
14d2a4f2df |
Merge branch 'master' into next
Integrates PR #50 (peer ACL enforcement) into the XX handshake architecture. ACL enforcement points adapted for XX's deferred identity learning: InboundHandshake check moves from handle_msg1 to handle_msg3 (responder learns initiator identity), OutboundHandshake check remains in handle_msg2 (initiator learns responder identity). Borrow scopes restructured to release connection borrows before authorize_peer calls. |
||
 Alex XieandJohnathan Corgan
|
745b523ac6 |
Add peer ACL enforcement with reloadable allow/deny files (#50)
Implement TCP Wrappers-style peer access control using /etc/fips/peers.allow and /etc/fips/peers.deny files. Evaluation order: allow overrides deny, default permit when no files exist. Three enforcement points: outbound connect (before dialing), inbound handshake (msg1 receipt, after restart/rekey classification), and outbound handshake completion (msg2, before peer promotion). Files support npub, hex pubkey, host alias, and ALL wildcard entries with automatic mtime-based reload. Adds fipsctl acl show query, 954-line acl module with unit tests, and a 6-node Docker integration harness (testing/acl-allowlist/) exercising insider, outsider, and allowed-remote scenarios. CI matrix entry included. Closes #50 Co-authored-by: Johnathan Corgan <johnathan@corganlabs.com> |
||
|
Johnathan Corgan
|
34f840a77b | Apply rustfmt to noise-xx-only code | ||
|
Johnathan Corgan
|
8162d3c237 |
Minimal shared-media beacons: 4-byte header, strip pubkey, remove BLE exchange
Redesign shared-media transport framing now that XX replaces IK: - Ethernet: unified 4-byte header [type][flags][length:2 LE] for all frame types, effective MTU now if_mtu - 4 - Beacons: strip 32-byte pubkey (34 → 5 bytes), identity learned from XX handshake msg2/msg3 instead of beacon - BLE: remove pre-handshake pubkey_exchange() and cross-probe tie-breaker, both unnecessary with XX - Discovery: support anonymous connections (pubkey_hint: None) with address-based dedup for shared-media transports - Post-handshake identity hooks in handle_msg2/msg3 for self-detection and future allow/deny list filtering (IDEA-0047) |
||
|
Johnathan Corgan
|
8357200b0e |
Remove IK/XK dead code, rename XX methods as sole pattern
- Delete PROTOCOL_NAME_IK, PROTOCOL_NAME_XK and all IK/XK methods - Remove Ik/Xk variants from NoisePattern enum - Rename XX methods to drop xx_ prefix (sole pattern) - Rename HandshakeMessageType variants from NoiseIKMsg1/NoiseIKMsg2 to Msg1/Msg2, add Msg3 variant (0x03) for XX 3-message flow - Fix doc comments with correct XX message sizes and descriptions - Fix stale SessionSetup/SessionAck handshake payload size comments |
||
|
Johnathan Corgan
|
e9da598f8a | Apply rustfmt to master-only code | ||
 Origami74
|
e693f4fb7e |
Add macOS support, fix bloom filter routing and MMP intervals
macOS platform: - Platform-native TUN interface management with shutdown pipe - Raw Ethernet transport with macOS socket backend (socket_macos.rs) - EthernetTransport and TransportHandle::Ethernet ungated from Linux-only - macOS .pkg packaging (build-pkg.sh, launchd plist, uninstall script) - CI: macOS build and unit test jobs; x86_64 cross-compiled from macos-latest via rustup target add x86_64-apple-darwin Gateway feature flag: - New opt-in `gateway` Cargo feature activates optional `rustables` dep - `pub mod gateway` and `Config.gateway` gated behind the feature so macOS builds never pull in Linux-only nftables bindings - `fips-gateway` bin has `required-features = ["gateway"]` - All Linux/OpenWrt/AUR packaging passes `--features gateway` CI / packaging: - package-linux, package-macos, package-openwrt now trigger on push to master/maint/next and on pull requests; release uploads remain tag-gated - Bloom filter routing fix: fall through to tree routing when no candidate is strictly closer - MMP intervals: raise MIN to 1s / MAX to 5s with 5-sample cold-start phase |
||
|
Johnathan Corgan
|
89352d3218 |
Add BLE L2CAP transport with scan-based auto-connect
BLE transport implementation using L2CAP Connection-Oriented Channels (SeqPacket mode) via the bluer crate, behind cfg(feature = "ble"). Core transport: - BleTransport<I> generic over BleIo trait (BluerIo prod, MockBleIo test) - Connection pool with priority eviction (static > discovered, max 7) - Connect-on-send via connect_inline() matching TCP behavior - Per-connection receive loops with pool cleanup on disconnect Discovery and probing: - Combined scan_probe_loop using select! over scanner events and a BinaryHeap delay queue with per-entry random jitter (0-5s) to prevent herd effects when multiple nodes see the same beacon simultaneously - Pre-handshake pubkey exchange ([0x00][pubkey:32]) for IK identity - Cross-probe tie-breaker: smaller NodeAddr's outbound wins (same convention as FMP/FSP rekey dual-initiation) - Probed peers reported to DiscoveryBuffer; pool fills through normal node-layer auto-connect -> send_async -> connect_inline path Beacon management: - Periodic advertising: 1s burst every 30s (configurable via beacon_interval_secs / beacon_duration_secs) - FIPS service UUID for scan filtering Configuration (all fields optional with defaults): - adapter, psm, mtu, max_connections, connect_timeout_ms - advertise, scan, auto_connect, accept_connections - beacon_interval_secs (30), beacon_duration_secs (1) Hardware validated with two BLE nodes: - 2048-byte MTU, ~60-160ms RTT, zero-config auto-connect - BLE spike tool at testing/ble/ for standalone adapter validation 42 unit tests + 4 node-level integration tests, all CI-compatible via MockBleIo (no hardware required). tokio test-util added for time-dependent scan/probe tests. |
||
|
Johnathan Corgan
|
b8fbecc575 |
Demote 35 info-level log messages to debug for cleaner production output
Reduce info-level noise by moving intermediate steps, periodic telemetry, cross-connection resolution details, and redundant messages to debug. Info output now focuses on operator-relevant state changes: lifecycle events, peer promotions, session establishment, parent switches, and transport start/stop. Key categories demoted: - Handshake cross-connection resolution mechanics (10 messages) - Periodic MMP link/session metric reports (4 messages) - TUN cleanup messages redundant with lifecycle shutdown (4 messages) - Transport "packet channel closed" shutdown messages (4 messages) - Retry scheduling, discovery lookup initiation, other intermediate steps Change default RUST_LOG from debug to info in systemd unit files. |
||
|
Johnathan Corgan
|
5053cf673d |
Add connect/disconnect control commands and maelstrom chaos scenario
Add runtime peer management to the FIPS daemon via control socket commands, and a new chaos simulation scenario that exercises dynamic topology mutation with ephemeral node identities. Daemon (connect/disconnect commands): - Extend control socket Request with optional params field - Add commands.rs module for mutating command dispatch, separate from read-only queries - Add api_connect() on Node: builds ephemeral PeerConfig (no auto- reconnect), pre-seeds identity cache, reuses initiate_peer_connection - Add api_disconnect() on Node: calls remove_active_peer(), clears retry_pending to suppress reconnection - Route non-show_* commands to async command dispatch in rx_loop fipsctl CLI: - Add Connect and Disconnect subcommands accepting npub or hostname - Resolve hostnames from /etc/fips/hosts before sending to daemon - Refactor socket I/O into reusable send_request helper Chaos simulator (maelstrom scenario): - Add PeerChurnManager: periodically disconnects a random active link and connects a random unconnected node pair via control socket - Add send_command() to control.py using base64-encoded JSON payloads to avoid shell quoting issues in docker exec - Add PeerChurnConfig to scenario with interval and ephemeral_fraction - Ephemeral identity support: nodes configured without nsec generate fresh keypairs on restart; simulator queries show_status for new npub and updates its cache via on_node_restart callback - Add maelstrom.yaml: all chaos dimensions (netem, link flaps, node churn, peer topology churn, traffic) with 50% ephemeral identity |
||
 KieranandJohnathan Corgan
|
e8ef15acb7 |
Fix stale session cleanup and identity cache pre-seeding
Cherry-picked from v0l PR #6 (issue #5): 1. remove_active_peer() now removes the end-to-end session from self.sessions when evicting a peer. The stale Established entry caused initiate_session() to silently return Ok(()) via the is_established() guard, preventing session re-establishment after link-layer reconnection. 2. initiate_peer_connections() pre-seeds the identity cache from configured peer npubs at startup, so TUN packets can be dispatched immediately without waiting for handshake completion. 3. schedule_reconnect() preserves accumulated backoff when a retry entry already exists, preventing exponential backoff reset on repeated link-dead cycles. Includes regression tests for all three fixes. |