- PathBroken handler: convert to async, trigger re-discovery via
maybe_initiate_lookup(), reset COORDS_PRESENT warmup counter
(was a stub that only invalidated coord_cache)
- CoordsRequired recovery timing: reset warmup counter in
handle_lookup_response() when discovery completes for an
established session, so COORDS_PRESENT packets fire after
fresh coords are available (not just on CoordsRequired receipt)
- Routing error rate limiting: add RoutingErrorRateLimiter
(100ms per-destination, matching ICMP PTB pattern) to gate
send_routing_error() at transit nodes
- Remove root refresh dead code: the 1800s periodic root
re-announcement in check_tree_state() only propagated to
depth 1 (sequence-only changes don't cascade). Root loss
detection relies on link failure propagation which works
correctly.
Sync fips-configuration.md with code changes from sessions 101-102:
- Replace route_size with identity_size (cache merge)
- Update cache section description (single cache, not dual)
- Add idle_timeout_secs and coords_warmup_packets to session table
- Add both to Complete Reference YAML
- Fix UDP MTU default in Complete Reference (1197 → 1280)
Add dual-approach MTU handling to prevent TCP connections from hanging
when packets exceed the transport MTU after FIPS encapsulation.
ICMPv6 Packet Too Big:
- Generate RFC 4443 PTB messages for oversized packets at TUN outbound
- Inject back via TUN for local delivery to the application
- Per-source rate limiting (100ms interval, 10s entry expiry)
- MTU check in handle_tun_outbound before session encapsulation
TCP MSS Clamping:
- Intercept SYN packets in run_tun_reader() (outbound)
- Intercept SYN-ACK packets in TunWriter (inbound)
- Clamp MSS option to fit within effective MTU (transport - 127 overhead)
- Recalculate TCP checksum after modification
Code organization:
- ICMP, TCP MSS, and rate limiter modules in upper/ alongside existing
protocol-specific packet handling (dns.rs, tun.rs)
- Shared FIPS_OVERHEAD constant (127 bytes) and effective_ipv6_mtu()
function in upper/icmp.rs
- Node::effective_ipv6_mtu() delegates to the shared function
- run_tun_reader() accepts actual transport MTU from config
Example config corrections:
- UDP transport MTU set to 1472 across all configs (correct max UDP
payload for standard Ethernet: 1500 - 20 IPv4 - 8 UDP)
- Startup logging of effective MTU and max MSS values
Johnathan Corgan
Origami74andJohnathan Corgan