The per-transport TCP inbound cap was hardwired to 256 and never read
node.limits.max_connections, so raising max_connections was a silent
no-op for inbound TCP. Resolve the effective cap with precedence:
explicit per-transport max_inbound_connections, then node-wide
max_connections, then the built-in default of 256. Established peers
remain bounded node-wide by add_connection, so deriving the per-transport
raw-accept ceiling from max_connections does not admit more real peers
across multiple transports.
Add effective_max_inbound on the TCP transport with a node_max_connections
setter wired from create_transports, plus a precedence unit test.
On a saturated public-mesh node the connection-lifecycle and capacity-cap
events fire continuously and drown out the genuinely notable INFO/WARN
lines. Demote them to debug and drop a redundant duplicate:
- FMP K-bit cutover promotion (encrypted): info -> debug
- "Connection promoted to active peer" (handshake): info -> debug, and
remove the duplicate "Inbound peer promoted to active" line that
shadowed it on the inbound path
- "Peer restart detected" (handshake): info -> debug
- "Peer removed and state cleaned up" (dispatch): info -> debug
- "Rejecting inbound TCP connection (max_inbound_connections reached)"
(tcp): warn -> debug
- "Congestion detected, CE flag set on forwarded packet" (forwarding):
warn -> debug
- "Removing peer: link dead timeout" (mmp): warn -> debug
These are expected, high-frequency conditions on a busy public node (new
and reconnecting peers, ECN CE marking, the inbound connection cap, and
link-dead churn), not operator-actionable signals.
The transport layer used Mutex::lock().unwrap() at ten sites across the
UDP, BLE, and Ethernet code. A std mutex poisons if a thread panics
while holding it, after which every lock().unwrap() on that same mutex
also panics, turning one fault into a cascade. These critical sections
only perform short HashMap/Vec operations on locally constructed values
and are not reachable from peer input, but the idiom is fragile against
any future in-section panic. Replace each with
lock().unwrap_or_else(|e| e.into_inner()), which recovers the guarded
data and removes the cascade with no new dependency and no call-graph
change.
Also replace four self.local_addr.unwrap() calls in the UDP start and
adopt paths with a sentinel fallback. The value is provably set just
above each log line today, but the unwrap is brittle against a future
reordering; logging an unbound sentinel is harmless and cannot panic.
Add a Loopback variant to TransportHandle backed by an unbounded
in-process channel and a shared address-to-receiver registry, so
node-level multi-node tests deliver packets directly between nodes
instead of over real localhost UDP sockets. This removes the kernel
UDP receive-buffer overflow that dropped handshake packets when many
tests ran in parallel under CPU contention, and lets the large-network
convergence tests run reliably in the default suite again (their
parallel-load ignore markers are removed).
The new transport and its enum variant are cfg(test)-gated, so the
daemon build is unaffected.
Add per-direction pool_inbound/pool_outbound counters to TcpStats and
TorStats, updated at every pool-insert, receive-loop-exit, transport-stop,
and send-failure removal site. Compare the max_inbound_connections cap
against pool_inbound rather than the combined pool length, so outbound
connect-on-send connections no longer consume the operator-facing inbound
budget. The configuration field name and operator semantics are preserved;
only the cap-check comparison and accounting change.
The UDP recv loop drained the kernel queue one packet per recvmsg(2).
Each call paid full per-syscall + per-task-wakeup overhead (~50us avg
including a futex-based scheduler hop), so under sustained load the
loop ran at one rx event per scheduler quantum — the dominant cap on
inbound packet rate.
On Linux, switch the steady-state path to recvmmsg(2) with a 32-packet
batch. A single readable() wakeup drains up to 32 datagrams in one
syscall before yielding back to the reactor. Stack-allocated mmsghdr
arrays sized to a module-level `BATCH_SIZE` constant.
`SO_RXQ_OVFL` is sampled once per batch off the cmsg chain of `msgs[0]`
and plumbed through `AsyncUdpSocket::recv_batch` as `(count, drops)`.
The counter is socket-wide and monotonic, so a single sample per batch
gives the 1Hz `sample_transport_congestion()` detector ample fresh
values under load (one batch = up to 32 datagrams). Cost is one
stack-allocated CMSG_SPACE(4) buffer + one CMSG_FIRSTHDR walk per
batch syscall.
macOS / Windows fall through to the per-packet recv_from loop —
recvmmsg is Linux-specific and the per-packet API is fast enough on
those platforms for now (recvmsg_x for Darwin can be added later).
The slice-array build also drops the `MaybeUninit::uninit().assume_init()`
+ `transmute` pair for `std::array::from_fn` over a single shared
`backing.iter_mut()` — same disjoint mutable borrows, no `unsafe`.
The Ethernet data frame format is `[type:1][length:2 LE][payload]`,
so the per-link payload MTU is the interface MTU minus 3 bytes,
not minus 1. The 2-byte length field is required to trim NIC
minimum-frame padding before AEAD verification.
The implementation in src/transport/ethernet/mod.rs already uses
saturating_sub(3) correctly; only the rustdoc on the effective_mtu
field and the EthernetConfig.mtu field's documentation lagged behind.
No behaviour change.
Add #[cfg(target_os = "macos")] unit tests catching macOS-specific
regressions before they reach the macos-latest GitHub runner.
src/upper/tun.rs: surgical refactor extracts the inline
AF_INET6_HEADER constant into module-scope helpers
utun_af_inet6_header() (encode) and parse_utun_af_prefix() (decode
inverse for round-trip testability). TunWriter::run now calls the
helper instead of the inline const; behavior unchanged. Six new
tests pin the AF=30 constant matching Darwin, big-endian byte order,
encode/parse round-trip, short-buffer rejection, minimum header
acceptance with trailing payload, and no-panic on garbage bytes.
src/transport/ethernet/socket_macos.rs: existing test mod already
covered bpf_wordalign and 5 parse_next_frame cases. Three new tests
fill genuine gaps: struct layout pin against kernel ABI, caplen-
overrun rejection, full Ethernet header round-trip via parse.
Existing tests pre-exist; only adding to the same #[cfg(test)] block.
The Nostr overlay advert publisher serialized `transport: tor`
endpoints as a bare `<onion>.onion` hostname with no port. The Tor
address parser requires `<host>:<port>` form and rejected the bare
shape with `expected host:port`. Any peer receiving a Tor-only
advert went into a persistent retry-fail loop on jittered backoff
until the advert aged out of the discovery cache. The bug had been
latent for as long as Tor adverts have been published on Nostr, and
was masked in deployments where every node also advertised a
non-Tor transport (peers fell through to the working endpoint).
Surfaced first on a deployment where Tor was the only advert path.
Publisher now emits `<onion>.onion:<port>` using a new
`transports.tor.advertised_port` config field that defaults to 443,
matching the Tor `HiddenServicePort 443 127.0.0.1:<bind_port>`
convention. Operators whose torrc uses a non-default virtual port
can override.
Adds a unit test that pins the publisher/parser contract: formats
the advert exactly as the publisher does and asserts `parse_tor_addr`
accepts the result; asserts the bare-onion form (the bug) does not
parse, catching any future regression that drops the port again.
Parser is unchanged (already correct).
Three related UDP transport changes that together close a real gap in
the v0.2.x "this transport accepts inbound" assumption:
- outbound_only (default false). When true, the transport binds a
kernel-assigned ephemeral port (0.0.0.0:0) regardless of the
configured bind_addr, refuses inbound handshakes (Transport trait's
accept_connections() returns false), and is never advertised on
Nostr regardless of advertise_on_nostr. Lets a node participate in
the mesh as a pure client — initiate outbound links without
exposing an inbound listener on a known port. Also closes the
"loopback bind as outbound-only workaround" trap: a UDP socket
bound to 127.0.0.1 pins 127.0.0.1 as the source IP on outbound
packets, and Linux refuses to deliver such packets out an external
interface — the daemon happily reports "transport started" while
no flow ever reaches an external peer.
- accept_connections (default true). Mirrors the existing
Ethernet/BLE knob. Lets operators run UDP in a "client" posture
(initiate outbound, refuse inbound msg1 from new addresses) without
switching transport. The Node-level handshake gate already carves
out msg1 from peers established on the transport so rekey works
on existing sessions.
- Startup validation: reject `transports.udp[*].bind_addr` set to a
loopback address (127.x.x.x, ::1, localhost) when at least one peer
has a non-loopback UDP address. Replaces the silent "peer link
won't establish" failure mode with a clear error pointing at the
bind misconfiguration. outbound_only is exempt (it overrides
bind_addr to 0.0.0.0:0).
The is_punch_packet-based filter from the previous commit, the
Node-level admission gate landed earlier on master, and these new
config fields together cover the three distinct ways the v0.2.x
"this transport accepts inbound" assumption could break.
Tests: validation truth table (loopback+external rejected,
loopback+loopback ok, outbound_only exempt), is_loopback_addr_str
helper, accept_connections wiring (default, explicit-false,
outbound_only-forces-false), end-to-end ephemeral-bind in the runtime.
1082 tests pass with --features nostr-discovery.
When a UDP hole-punch succeeds in only one direction and the local
side adopts the punched socket, the remote end keeps retrying its
own punch attempt for several seconds. Those retries arrive on the
adopted socket and were forwarded to the FMP rx handler, which
parsed the first byte (0x4E from PUNCH_MAGIC's "NPTC" big-endian
encoding) as FMP protocol version 4 and emitted "Unknown FMP
version, dropping" once per probe. The probe stream contaminated
post-adoption handshake logs and added timing pressure during the
handshake window.
Add a transport-level filter in udp_receive_loop that silently
drops any datagram whose first 4 bytes match PUNCH_MAGIC or
PUNCH_ACK_MAGIC. Filter applies to all UDP transports, not just
adopted ones — the magic values cannot collide with valid FMP
frames (FMP version 4 is not assigned, and the protocol's
versioning is wire-format breaking), so universal filtering is
safe and removes any "is this an adopted socket" branching.
Move PUNCH_MAGIC / PUNCH_ACK_MAGIC and the new is_punch_packet()
helper from the `nostr-discovery`-gated submodule up to
crate::discovery (unconditionally compiled) so the UDP transport
can import them without requiring the feature. The
nostr-discovery types module re-exports the constants so the
existing traversal-side imports keep working unchanged.
Test: pushes a probe + ack + real frame through the receive loop
and asserts only the real frame is delivered to packet_tx.
Optional peer discovery and NAT hole-punching path gated behind a new
`nostr-discovery` cargo feature. Nodes publish signed overlay endpoint
adverts to public Nostr relays, consume peer adverts to populate
fallback dial addresses, and use STUN-assisted UDP hole punching with
NIP-59 gift-wrap offer/answer signaling to establish direct UDP paths
between NATed peers. Once a punched socket is up, it is handed into
the existing FIPS UDP transport and the standard Noise/FMP session
stack takes over unchanged.
The cargo feature is in the default feature set
(`default = ["nostr-discovery"]`) so stock builds include it; a
build that explicitly disables default features (or selects a
feature set without `nostr-discovery`) does not link the nostr /
nostr-sdk crates and does not emit a no-op poll in the tick loop.
Runtime behavior is independently gated by
`node.discovery.nostr.enabled`, which defaults to false; if the
config enables Nostr on a non-feature build, startup logs a
warning and continues without it.
== Cargo feature and dependencies
- New cargo feature `nostr-discovery = ["dep:nostr", "dep:nostr-sdk"]`.
Not in the default feature set.
- New optional Linux-only dependencies: `nostr 0.44` (features: std,
nip59) and `nostr-sdk 0.44`. Gift-wrap unwrap is hand-rolled in
`src/discovery/nostr/signal.rs` rather than relying on the SDK's
rumor-author check, which FIPS sidesteps by trusting `seal.pubkey`
exclusively.
== Wire format
Overlay advert event: `kind 37195`, parameterized replaceable
(NIP-01 application-defined replaceable range 30000-39999), with
`d = "fips-overlay-v1"`. The digits visually spell FIPS (7=F, 1=I,
9=P, 5=S); a relay survey confirmed the kind is unused.
Advert content carries the version tag, endpoint list
(`udp|tcp|tor` + addr), optional signal-relay and stun-server
metadata, and `issuedAt` / `expiresAt` timestamps. Endpoint
`addr: "nat"` is the sentinel that triggers traversal on the peer
side. NIP-40 `expiration` tag bounds staleness on permanent
shutdown. Lifecycle relies on parameterized-replaceable
supersession; the daemon does not emit NIP-09 kind-5 deletes —
strict relays (Damus, Primal) race delete-against-replace and can
silently drop the replacement.
Gift-wrapped signal event: `kind 21059`. Punch packets carry magic
values `PUNCH_MAGIC` / `PUNCH_ACK_MAGIC`, a sequence number, and a
16-byte session hash.
== Discovery surface
- `src/discovery.rs` (always compiled)
- `EstablishedTraversal`: bound UDP socket + selected remote +
peer npub + optional transport name/config tuning overrides.
- `BootstrapHandoffResult`: returned on successful handoff —
allocated transport id, local/remote addrs, peer NodeAddr,
session id.
- `src/discovery/nostr/` (`#![cfg(feature = "nostr-discovery")]`)
- `types.rs`: wire and control types described above. `ADVERT_KIND`
constant. `BootstrapError` enumerates failure modes (disabled,
missing advert, missing NAT endpoint, no usable relays, invalid
advert, invalid npub, signal timeout, punch timeout, replay,
STUN failure, protocol, nostr, io, serde, event-parse).
- `runtime.rs`: `NostrDiscovery` coordinator. Owns the shared
nostr-sdk `Client`, subscribes to advert + signal event kinds,
maintains a bounded advert cache and a bounded seen-sessions
replay set, drains `BootstrapEvent::{Established, Failed}` for
the node to consume, exposes `update_local_advert`,
`request_connect`, `advert_endpoints_for_peer`,
`cached_open_discovery_candidates`, and `shutdown`.
- `signal.rs`: NIP-59 gift-wrap encode/decode. Outbound wraps are
built against per-attempt ephemeral keys; inbound events are
unwrapped against the node identity.
- `stun.rs`: RFC 5389/8489 Binding Request client with
XOR-MAPPED-ADDRESS parsing for both IPv4 and IPv6; used only to
observe the initiator's own reflexive address against its
locally configured STUN list (peer-advertised STUN is
informational, never an egress target).
- `traversal.rs`: per-attempt candidate-pair punch planner.
Allocates a fresh `0.0.0.0:0` UDP socket per attempt, enumerates
LAN-private and ULA interface addresses alongside the STUN
reflexive address, schedules probe/ack exchanges at the
configured interval for the configured duration, and picks the
first candidate pair that authenticates end-to-end.
Strategy ordering is Reflexive↔Reflexive first, then LAN, then
Mixed. The STUN-observed pair is the only candidate that's reliable
across arbitrary network topologies; trying it first prevents the
planner from latching onto a misleading host-candidate path before
the reflexive path gets a chance. There is no catch-all
Local↔Local strategy: a previous design that paired every local
host candidate from one side with every local host candidate from
the other could declare success on a one-way reachable asymmetric
L3 path (corporate VPN, Tailscale subnet route, overlapping private
address space), only for the FMP handshake to stall because the
return path didn't match. The legitimate `Lan` strategy still pairs
candidates that share a subnet.
== Configuration surface
`node.discovery.nostr.*` (`NostrDiscoveryConfig`), all `serde(default)`
with `deny_unknown_fields`:
- `enabled` (default false), `advertise` (default true)
- `advert_relays`, `dm_relays`, `stun_servers`: defaults are
`wss://relay.damus.io`, `wss://nos.lol`, `wss://offchain.pub`
for both relay lists, and Google / Cloudflare / Twilio for STUN.
Operators are expected to override for production. Other
verified-working public relays for reference:
`nostr.bitcoiner.social`, `nostr-pub.wellorder.net`,
`nostr.oxtr.dev`, `nostr.mom`.
- `app` (default `"fips-overlay-v1"`), `signal_ttl_secs` (120)
- `policy`: `NostrDiscoveryPolicy::{Disabled, ConfiguredOnly (default),
Open}` — controls whether advert-derived endpoints are consumed
only for peers carrying `via_nostr = true`, or also for
non-configured peers within a budget cap.
- `share_local_candidates` (default false) — when false, the offer's
`local_addresses` list is empty and peers see only the reflexive
address. Enable per-node only for genuinely same-LAN deployments;
off-by-default eliminates the misleading-path failure mode for
the common case where peers are not on the same broadcast domain.
- `open_discovery_max_pending` (64) — caps queued open-discovery
retries; bounded by available outbound slots.
- `max_concurrent_incoming_offers` (16) — semaphore against offer
spam; excess offers are debug-logged and dropped.
- `advert_cache_max_entries` (2048) and `seen_sessions_max_entries`
(2048) — bound memory under ambient relay volume; overflow
evictions are debug-logged.
- `attempt_timeout_secs` (10), `replay_window_secs` (300)
- `punch_start_delay_ms` (2000), `punch_interval_ms` (200),
`punch_duration_ms` (10000)
- `advert_ttl_secs` (3600), `advert_refresh_secs` (1800)
Per-peer and per-transport flags:
- `PeerConfig.via_nostr: bool` — when true (and Nostr is enabled),
advert-derived addresses are appended as fallback dial candidates
after static addresses for that peer.
- `PeerConfig.addresses` is now `serde(default)` and may be empty
when `via_nostr: true`; validation requires at least one of the
two to be present per peer, and the error message names the
peer's npub.
- `UdpConfig.advertise_on_nostr: Option<bool>` and
`UdpConfig.public: Option<bool>` — UDP transports can be
advertised either as direct `host:port` (public = true) or as the
`addr: "nat"` sentinel that triggers rendezvous on the peer side.
- `TcpConfig.advertise_on_nostr` and `TorConfig.advertise_on_nostr`
— TCP and Tor onion endpoints can be advertised as directly
reachable.
- A reserved peer address `transport: udp, addr: "nat"` parses without
special-casing in YAML and routes through the bootstrap runtime.
Cross-field validation (`Config::validate`, called from `Node::new`
and `Node::with_identity`):
- Any transport with `advertise_on_nostr = true` requires
`node.discovery.nostr.enabled = true`.
- Any peer with `via_nostr = true` requires
`node.discovery.nostr.enabled = true`.
- A non-public UDP advert (`advertise_on_nostr = true`,
`public = false` — i.e. `udp:nat`) additionally requires at least
one `dm_relay` and at least one `stun_server`.
Surfaced as `ConfigError::Validation`.
== Node integration
`src/node/lifecycle.rs` is the main integration point.
- At node start (after transports are up, before TUN), if Nostr is
enabled and the feature is compiled in, `NostrDiscovery::start` is
invoked, the initial local overlay advert is built from the live
transport set and published, and the runtime handle is stored.
- The rx tick loop calls `poll_nostr_discovery` (feature-gated both
at method definition and call site), which refreshes the local
advert, drains bootstrap events, adopts established traversals,
schedules retries for failed traversals, and — under `policy:
open` — enqueues outbound retries for non-configured peers
visible in the advert cache, bounded by
`open_discovery_max_pending` and the remaining outbound slots.
- Outbound peer dialing is refactored to `try_peer_addresses`, which
first exhausts the static address list in priority order and only
then appends advert-derived fallback addresses; both lists run
through the same `attempt_peer_address_list` code path. The
`udp:nat` sentinel address triggers `NostrDiscovery::request_connect`
for the peer instead of a direct dial and returns `Ok(())`.
- `build_overlay_advert` walks operational transports, consults
per-instance `UdpConfig` / `TcpConfig` / `TorConfig` (matching by
optional transport instance name), and emits an `OverlayAdvert`
including `signalRelays` and `stunServers` when any UDP endpoint
is advertised as NAT.
- `adopt_established_traversal` is the bootstrap handoff API:
allocates a new `TransportId`, constructs a `UdpTransport` with
the user-supplied (or default) `UdpConfig`, calls the new
`adopt_socket_async` to reuse the punched socket verbatim,
registers the transport in the normal transport map, records it
in `bootstrap_transports`, and calls `initiate_connection` so the
normal handshake path runs. On failure, the transport is stopped
and removed cleanly and the set membership is rolled back.
- On clean shutdown, `NostrDiscovery::shutdown` is awaited so
background tasks stop before transports are torn down. (The
advert is not explicitly retracted; NIP-40 expiration plus the
next refresh from any live publisher supersedes it.)
New `Node` fields:
- `nostr_discovery: Option<Arc<NostrDiscovery>>` (feature-gated).
- `bootstrap_transports: HashSet<TransportId>` — per-peer UDP
transports adopted from NAT traversal, cleaned up via
`cleanup_bootstrap_transport_if_unused` whenever the link,
connection, peer, or pending-connect referencing them is removed.
Retry and error surface:
- `RetryState.expires_at_ms: Option<u64>` — optional absolute expiry
for a retry entry. `pump_retries` drops expired entries with an
info log. Used for open-discovery retries, which expire at two
times the advert TTL.
- New `NodeError::BootstrapHandoff(String)` returned from
`adopt_established_traversal` when the underlying transport
adoption fails or local address discovery fails.
- New `ConfigError::Validation(String)`.
- A small refactor extracts `Node::now_ms()` and reuses it across
lifecycle, rx-loop tick, and timeout bookkeeping.
== UDP transport
`src/transport/udp/`:
- `UdpRawSocket::adopt(std::net::UdpSocket, recv_buf, send_buf)`:
adopts an externally bound socket, makes it non-blocking, applies
the configured buffer sizes (warning if the kernel clamps), and
reports the resulting local address. Preserves the NAT mapping —
no rebind.
- `UdpTransport::adopt_socket_async(std::net::UdpSocket)`: the
`start_async` analogue for an already-bound socket, wiring the
async socket and recv task exactly as the fresh-bind path would.
- `Drop` impl for `UdpTransport`: if a transport is dropped while
still holding a recv task or socket (for example on error
teardown), aborts the task, clears the socket, and emits a debug
log so the cleanup is visible in tracing rather than silent.
== Logging and observability
Default `EnvFilter` demotes third-party relay-pool DEBUG output to
TRACE-only: `nostr_relay_pool`, `nostr_sdk`, and `nostr` are pinned
at INFO when our level is anything below TRACE, and at TRACE when
our level is TRACE — so the raw frames are still reachable when
explicitly asked for. RUST_LOG continues to override completely.
Concise one-line DEBUG events are emitted at the meaningful points
in the discovery / hole-punch sequence:
- `advert: published` (event id, relay count, endpoints, ttl)
- `advert: peer cached` (notify-loop ingress for non-self)
- `advert: resolved` (cache hit / relay fetch outcome)
- `traversal: initiator starting`
- `traversal: initiator STUN observed` (reflexive, local count)
- `traversal: offer sent` (session id, relay count, event id)
- `traversal: answer received` (accepted, reflexive, local)
- `traversal: initiator punch succeeded` (remote addr)
- `traversal: offer received` (responder side)
- `traversal: responder STUN observed`
- `traversal: answer sent`
- `traversal: responder punch succeeded`
Npubs are shortened to `npub1<4>..<4>` and event/session ids to
their first 8 hex characters.
Other operator-facing logs:
- `UdpTransport` adoption and drop paths log at info / debug.
- `adopt_established_traversal` logs at debug on entry and info on
successful return, tagged with peer npub, session id, transport
id, and both socket endpoints, so the bootstrap handoff is
traceable end-to-end alongside the `UdpTransport::drop` log.
- `cleanup_bootstrap_transport_if_unused` logs at debug when the
reference-count check drops an adopted transport.
- `connect_peer` tags its entry `debug!` with `peer_npub` so
downstream STUN, punch, and handshake logs for the same peer
correlate for operators.
- Advert-cache and seen-sessions overflow evictions log at debug so
mis-sized caps are visible under ambient relay volume.
- Gift-wrap unwrap failures on `SIGNAL_KIND` events log at trace
(hot path: fires for every unrelated signal event on the same
relay).
- Traversal-offer handler failures log at debug. Expected conditions
such as punch timeout on symmetric NAT are covered there; real
problems are reported upstream via `BootstrapEvent::Failed`.
- Inbound-offer rate-limit messages name the governing config field
(`max_concurrent_incoming_offers`) and state that the offer was
rate-limited rather than failing.
== Tests
- 18 new unit tests in `src/discovery/nostr/tests.rs` covering advert
encoding, signal envelope round-trip, STUN parsing, punch-packet
codec, and replay-window enforcement. Run under the
`nostr-discovery` feature.
- Config-validation tests in `src/config/mod.rs` covering the three
cross-field invariants and YAML parsing of the full
`node.discovery.nostr` block plus `peers[].via_nostr`, empty
`addresses` with `via_nostr: true`, and a `udp: nat` address.
- `src/node/tests/bootstrap.rs` integration tests that drive a
synthetic traversal (bound UDP socket pair + synthetic peer
identity) through `adopt_established_traversal` and assert the
Noise handshake completes over the adopted socket.
- Punch-planner tests assert reflexive-before-LAN ordering and that
same-LAN scenarios still include the LAN target in the plan.
- `testing/nat/` Docker NAT lab harness:
- Local `strfry` relay, local STUN responder, and one or two
router containers performing `iptables` NAT.
- Node LAN interfaces are provisioned with explicit `veth` pairs
injected into the node and router namespaces so every packet
traverses the router namespace (plain Docker bridges are not
used for the LAN).
- `cone` scenario: both peers behind full-cone-emulation NAT
(SNAT with source-port preservation, inbound DNAT back to the
single LAN host regardless of remote source); asserts UDP
traversal succeeds and link remote addresses are on the router
WAN subnet.
- `symmetric` scenario: `MASQUERADE --random-fully`; asserts UDP
traversal fails and TCP fallback converges over router-
published WAN addresses.
- `lan` scenario: both peers share a LAN subnet; asserts LAN
addresses are preferred over reflexive ones.
- Cleanup tears down all profile-gated services
(`--profile cone --profile symmetric --profile lan`) so no
orphan containers survive a run.
- `testing/scripts/build.sh` builds the Docker test image with
`--features "tui nostr-discovery"` by default so NAT-harness
binaries include bootstrap support.
== CI
- Linux release build and nextest unit-test job both use
`--features "gateway nostr-discovery"` so the feature-gated code
and its unit tests compile and run in CI.
- Three new integration matrix entries (`nat-cone`, `nat-symmetric`,
`nat-lan`) invoke `testing/nat/scripts/nat-test.sh`, collect
`docker compose logs` on failure, and always stop containers.
== Packaging and operations
- `packaging/common/fips.yaml` ships a fully commented
`node.discovery.nostr.*` block, plus documented
`advertise_on_nostr` / `public` examples under the UDP transport,
an `advertise_on_nostr` example under TCP, and a `via_nostr: true`
example under the static peer section with both a direct
`host:port` UDP address and a `udp: nat` fallback.
- `.github/workflows/package-openwrt.yml`: NIP-94 release event
publishes target the new default relay set.
== Documentation
- `README.md`: overlay discovery + NAT traversal moved from
"Near-term priorities" into "What works today".
- `docs/design/fips-intro.md`: rewrites the paragraphs that
previously described Nostr discovery and NAT traversal as future
work; describes the shipped mechanism and the feature gate.
- `docs/design/fips-transport-layer.md`: drops the "(future
direction)" qualifier from the Nostr Relay Discovery section,
expands with the `udp:nat` advertisement and bootstrap handoff
description, and updates the Current State callout.
- `docs/design/fips-mesh-layer.md`: notes that mid-session NAT
rebinding (roaming) and initial NAT traversal (Nostr path) are
distinct mechanisms.
- `docs/design/fips-configuration.md`: documents the full
`node.discovery.nostr.*` surface, including the three resource
caps and `share_local_candidates`.
- `docs/design/fips-nostr-discovery.md`: design and configuration
reference for the shipped mechanism, including the empty-
`addresses`-with-`via_nostr` shorthand.
- `docs/proposals/nostr-udp-hole-punch-protocol.md`: adds an
Implemented status callout, clarifies that the punch socket is
per-peer and per-attempt rather than shared with the application
listener, aligns field names with the shipped JSON
(`sessionId`, `issuedAt` / `expiresAt`, `reflexiveAddress`,
`localAddresses`, `stunServer`), sets the `d`-tag to
`fips-overlay-v1`, names the kind as 37195, and notes that
advertised STUN entries are informational.
- `docs/proposals/README.md`: adds a Status column and marks the
hole-punching proposal Implemented.
- `CHANGELOG.md`: Unreleased > Added entry covering the discovery
path, STUN/punch path, configuration surface, and Docker NAT lab.
Co-authored-by: Johnathan Corgan <johnathan@corganlabs.com>
Drop the `tui`, `ble`, and `gateway` cargo features and replace
them with platform cfg gates. Plain `cargo build` now produces
every subsystem appropriate for the target platform with no
feature flags required.
Motivation:
- `default = ["tui", "ble"]` broke `cargo build` on macOS and
Windows because `ble` pulled in `bluer` (BlueZ, Linux-only).
Every non-Linux packager needed `--no-default-features`.
- The feature flags on `ble` and `gateway` were redundant with
their platform-gated deps (`bluer`, `rustables`). The parallel
gating was inconsistent and error-prone.
- `tui` feature protected against a ratatui binary-size concern
that no longer applies in 2026.
Cargo.toml:
- Remove `tui`, `ble`, `gateway` features; `default = []`.
- Promote `ratatui` to a non-optional top-level dependency.
- Move `rustables` from top-level optional into the Linux
target block, non-optional.
- Split `bluer` into its own target block with
`cfg(all(target_os = "linux", not(target_env = "musl")))`
— BlueZ isn't available on musl router targets and
`libdbus-sys` doesn't cross-compile to musl without pkg-config
sysroot setup.
- Drop `required-features` from the `fipstop` and `fips-gateway`
`[[bin]]` entries.
build.rs:
- Emit a `bluer_available` custom cfg when `target_os == "linux"`
and `target_env != "musl"`, for use in place of the verbose
full predicate in source cfg gates.
Source:
- Replace every `#[cfg(feature = "gateway")]` with
`#[cfg(target_os = "linux")]`. Gateway code works on both
glibc and musl Linux (rustables is fine on musl).
- Replace every `#[cfg(feature = "ble")]` with
`#[cfg(bluer_available)]`. BLE-specific code (BluerIo module,
bluer type conversions, BLE transport instance creation,
resolve_ble_addr) is excluded on musl and non-Linux. Generic
`BleAddr`, `BleIo` trait, `MockBleIo`, and `BleTransport<I>`
still compile on all targets.
- `src/bin/fips-gateway.rs`: always compiled, but `main()` is
gated to Linux. Non-Linux stub exits 1 with a diagnostic.
Existing non-Linux packaging scripts don't ship it, so the
stub binary sits unused.
Packaging and CI:
- Drop `--features` and `--no-default-features` flags from every
packaging script and workflow. Defaults now match each
platform's capabilities.
- AUR `fips-git` automatically aligns with stable `PKGBUILD`
(both build with defaults).
Verified: `cargo build --release` with no flags produces all
four binaries on glibc Linux; all unit and integration tests
pass across Linux/macOS/Windows/OpenWrt (musl) in CI.
Gate platform-specific code behind cfg attributes and add full Windows
support: TUN device via wintun, TCP control socket on localhost:21210,
Windows Service lifecycle (--install-service/--uninstall-service/--service),
CI build and test matrix, and packaging with ZIP builder and PowerShell
service management scripts.
Key changes:
- Cargo.toml: move tun/libc/rtnetlink behind cfg(unix); add wintun and
windows-service dependencies for Windows
- upper/tun.rs: wintun-based TUN implementation with netsh configuration
for IPv6 address, MTU, and fd00::/8 routing
- control/mod.rs: split into unix_impl/windows_impl; Windows uses TCP on
localhost:21210 with shared connection handler
- bin/fips.rs: refactor main() into run_daemon() accepting a shutdown
signal; add Windows Service support via windows-service crate
- transport/udp/socket.rs: platform-gated modules; Windows uses
tokio::net::UdpSocket (kernel drop count unavailable, returns 0)
- transport/ethernet: gate to cfg(unix); add Windows stub types
- config: platform-conditional default paths (socket, hosts) for Windows
- CI: add windows-latest to build matrix and test-windows job with
cargo-nextest
- packaging/windows: build-zip.ps1, install-service.ps1,
uninstall-service.ps1, and package-windows.yml workflow
- README/docs: Windows build instructions, service management, and
control socket platform differences
Linux and macOS behavior is unchanged.
macOS platform:
- Platform-native TUN interface management with shutdown pipe
- Raw Ethernet transport with macOS socket backend (socket_macos.rs)
- EthernetTransport and TransportHandle::Ethernet ungated from Linux-only
- macOS .pkg packaging (build-pkg.sh, launchd plist, uninstall script)
- CI: macOS build and unit test jobs; x86_64 cross-compiled from
macos-latest via rustup target add x86_64-apple-darwin
Gateway feature flag:
- New opt-in `gateway` Cargo feature activates optional `rustables` dep
- `pub mod gateway` and `Config.gateway` gated behind the feature so
macOS builds never pull in Linux-only nftables bindings
- `fips-gateway` bin has `required-features = ["gateway"]`
- All Linux/OpenWrt/AUR packaging passes `--features gateway`
CI / packaging:
- package-linux, package-macos, package-openwrt now trigger on push to
master/maint/next and on pull requests; release uploads remain tag-gated
- Bloom filter routing fix: fall through to tree routing when no candidate
is strictly closer
- MMP intervals: raise MIN to 1s / MAX to 5s with 5-sample cold-start phase
Add fips-gateway binary: a separate daemon that allows unmodified LAN
hosts to reach FIPS mesh destinations via DNS-allocated virtual IPs
and kernel nftables NAT.
Gateway DNS resolver: forwarding proxy on [::]:53 that intercepts
.fips queries, forwards to daemon resolver (localhost:5354), allocates
virtual IPs from pool, returns AAAA records. Always sends AAAA upstream
regardless of client query type, returns proper NODATA for non-AAAA.
Virtual IP pool: fd01::/112 pool with state machine lifecycle
(Allocated → Active → Draining → Free), TTL-based reclamation,
conntrack integration for session tracking.
NAT manager: nftables DNAT/SNAT rules via rustables netlink API,
per-mapping rule lifecycle, fips0 masquerade for LAN client source
address rewriting.
Network setup: local pool route, proxy NDP for virtual IPs on LAN
interface, IPv6 forwarding validation.
Control socket at /run/fips/gateway.sock with show_gateway and
show_mappings queries. fipstop Gateway tab with pool summary gauge
and mappings table.
Gateway config section in fips.yaml with pool CIDR, LAN interface,
DNS upstream, TTL, and grace period settings.
Design doc at docs/design/fips-gateway.md.
Integration test (testing/static/scripts/gateway-test.sh): three
containers verifying DNS resolution, end-to-end HTTP, NAT state,
TTL expiration, SERVFAIL fallback, and clean shutdown.
The accept_connections gate in handle_msg1() was at the top of the
function, dropping all inbound msg1 packets on transports that don't
accept new connections (e.g. UDP holepunch). This blocked rekey
handshakes on established links, causing repeated "dual rekey
initiation" log floods.
Move the gate below the existing-peer classification so it only
blocks truly new inbound handshakes from unknown addresses. Rekey
and restart msg1s for established peers are now processed normally.
Fixes#47
PR #49
- Promote probe connections directly into pool instead of dropping and
reconnecting. Eliminates fragile two-phase connect pattern (probe →
disconnect → reconnect) that caused race conditions on restart.
- send_async fails fast when no connection exists, triggering a
background connect_async instead of blocking the event loop for up
to 10s on inline L2CAP connect. Prevents control socket query
timeouts and MMP processing stalls.
- Add 5-second timeout to pubkey_exchange recv. Without this, a peer
that connects but never sends its pubkey blocks the calling task
forever, killing the scan_probe_loop or accept_loop entirely.
- Add retry timer in scan_probe_loop for addresses that failed probe
but won't get another DeviceAdded from BlueZ (deduplication).
- Clear BlueZ cached devices before starting scan so fresh
advertisements trigger DeviceAdded after daemon restart.
- connect_async now performs pubkey exchange before promoting to pool,
matching the accept_loop's expectation on inbound connections.
- BLE tests updated to pre-establish connections via connect_async
since send_async no longer does inline connect.
- Size receive buffer from negotiated recv_mtu instead of hardcoded 4096
(prevents silent truncation if MTU exceeds buffer size)
- Set advertising interval to 400-600ms for deterministic behavior
instead of depending on BlueZ driver defaults
- Enable power_forced_active on L2CAP sockets to prevent sniff-mode
latency spikes during data transfer (best-effort, logged on failure)
- Log negotiated PHY and MTU at connection establishment for diagnostics
Replace burst beacon pattern (1s on / 30s off) with continuous
advertising. The burst pattern caused L2CAP connect timeouts because
the remote side was no longer connectable when the probe fired after
jitter delay. BLE advertising overhead is negligible (~0.15% duty
cycle on advertising channels).
Replace the seen HashSet + jitter delay queue with a simple cooldown
map. After probing an address (success or failure), suppress re-probe
for 30s (configurable via probe_cooldown_secs). Connected peers are
filtered by pool membership check. This eliminates the bug where
failed probes permanently blacklisted addresses for the session
lifetime.
Remove config fields: scan_interval_secs, beacon_interval_secs,
beacon_duration_secs. Add: probe_cooldown_secs.
BLE transport implementation using L2CAP Connection-Oriented Channels
(SeqPacket mode) via the bluer crate, behind cfg(feature = "ble").
Core transport:
- BleTransport<I> generic over BleIo trait (BluerIo prod, MockBleIo test)
- Connection pool with priority eviction (static > discovered, max 7)
- Connect-on-send via connect_inline() matching TCP behavior
- Per-connection receive loops with pool cleanup on disconnect
Discovery and probing:
- Combined scan_probe_loop using select! over scanner events and a
BinaryHeap delay queue with per-entry random jitter (0-5s) to prevent
herd effects when multiple nodes see the same beacon simultaneously
- Pre-handshake pubkey exchange ([0x00][pubkey:32]) for IK identity
- Cross-probe tie-breaker: smaller NodeAddr's outbound wins (same
convention as FMP/FSP rekey dual-initiation)
- Probed peers reported to DiscoveryBuffer; pool fills through normal
node-layer auto-connect -> send_async -> connect_inline path
Beacon management:
- Periodic advertising: 1s burst every 30s (configurable via
beacon_interval_secs / beacon_duration_secs)
- FIPS service UUID for scan filtering
Configuration (all fields optional with defaults):
- adapter, psm, mtu, max_connections, connect_timeout_ms
- advertise, scan, auto_connect, accept_connections
- beacon_interval_secs (30), beacon_duration_secs (1)
Hardware validated with two BLE nodes:
- 2048-byte MTU, ~60-160ms RTT, zero-config auto-connect
- BLE spike tool at testing/ble/ for standalone adapter validation
42 unit tests + 4 node-level integration tests, all CI-compatible
via MockBleIo (no hardware required). tokio test-util added for
time-dependent scan/probe tests.
Add TorTransport in src/transport/tor/ supporting three operating modes:
Outbound (socks5 mode):
- Non-blocking SOCKS5 connect via tokio-socks with per-destination
circuit isolation (IsolateSOCKSAuth)
- TorAddr enum for .onion and clearnet address types
- Connection pool with per-connection receive tasks, reuses TCP
stream FMP framing
- connect_async()/connection_state_sync()/promote_connection() follow
the same non-blocking polling pattern as TCP transport
Inbound (directory mode — recommended for production):
- Tor manages the onion service via HiddenServiceDir in torrc
- FIPS reads .onion address from hostname file at startup
- No control port needed — enables Tor Sandbox 1 (seccomp-bpf)
- Accept loop mirrors TCP pattern with DirectoryServiceConfig
Monitoring (control_port mode and optional in directory mode):
- Async control port client supporting TCP and Unix socket connections
via Box<dyn AsyncRead/Write> trait objects
- AUTHENTICATE with cookie or password auth
- 8 GETINFO queries: bootstrap, circuits, traffic, liveness, version,
dormant state, SOCKS listeners
- Background monitoring task polls every 10s, caches TorMonitoringInfo
in Arc<RwLock> for synchronous query access
- Bootstrap milestone logging (25/50/75/100%), stall warning (>60s),
network liveness transitions, dormant mode entry
- Directory mode optionally connects to control port when control_addr
is configured (non-fatal on failure)
Operator visibility:
- show_transports query exposes tor_mode, onion_address, tor_monitoring
(bootstrap, circuit_established, traffic, liveness, version, dormant)
- fipstop transport detail view: Tor mode, onion address, SOCKS5/control
errors, connection stats, Tor daemon status section
- fipstop table view: tor(mode) label with truncated onion address hint
Security hardening:
- Per-destination circuit isolation via IsolateSOCKSAuth
- Unix socket default for control port (/run/tor/control)
- Reference torrc with HiddenServiceDir, VanguardsLiteEnabled,
ConnectionPadding, DoS protections (PoW + intro rate limiting)
Config:
- TorConfig with socks5, control_port, and directory modes
- DirectoryServiceConfig: hostname_file, bind_addr
- control_addr, control_auth, cookie_path, connect_timeout,
max_inbound_connections
Testing:
- 69 unit + integration tests with mock SOCKS5 and control servers
- Docker tests: socks5-outbound (clearnet via Tor) and directory-mode
(HiddenServiceDir onion service)
Documentation:
- Transport layer design doc: Tor architecture, directory mode
- Configuration doc: Tor config tables and examples
Add resolve_socket_addr() with IP fast path and tokio::net::lookup_host()
fallback for DNS hostnames. Peer addresses can now use hostnames like
"peer1.example.com:2121" alongside IP addresses.
UDP transport adds a per-transport DNS cache (60s TTL) to avoid
per-packet resolution. TCP resolves at connect time (one-shot).
Update design docs, config examples, and changelog to reflect hostname
support in transport addressing.
TCP (and future Tor) transports previously established connections
synchronously inside send(), blocking the node's RX event loop during
TCP handshake. This is particularly problematic for Tor where SOCKS5
circuit establishment can take 30-120 seconds.
Add a non-blocking connect path:
- ConnectionState enum in transport layer (None/Connecting/Connected/Failed)
- connect_async() on TcpTransport spawns background TCP connect task
- connection_state_sync() polls task completion, promotes to pool
- TransportHandle gains connect() and connection_state() dispatch methods
- Node tracks PendingConnect entries for connection-oriented transports
- initiate_connection() defers handshake for connection-oriented transports
- start_handshake() extracted as separate method for deferred invocation
- poll_pending_connects() in tick handler polls and completes handshakes
- Failed connects trigger retry via schedule_retry()
Connectionless transports (UDP, Ethernet) are unchanged — connect()
is a no-op and connection_state() always returns Connected.
The existing connect-on-send path in send_async() is preserved as
fallback for reconnection after connection drops.
811 tests pass (6 new), clippy clean.
Implement hop-by-hop ECN congestion signaling through the FMP layer,
transport-level congestion detection via kernel drop counters, and
chaos harness integration for end-to-end validation.
FMP/session ECN plumbing:
- Thread ce_flag parsed at link layer through dispatch_link_message,
handle_session_datagram, handle_session_payload, and
handle_encrypted_session_msg to session delivery
- Replace hardcoded false in session-layer record_recv() with actual
ce_flag, activating ecn_ce_count tracking in session MMP
ECN congestion detection and CE relay:
- Add EcnConfig (node.ecn.*) with configurable loss_threshold (5%)
and etx_threshold (3.0) for transit congestion detection
- Add send_encrypted_link_message_with_ce() that ORs FLAG_CE into FMP
header flags; original method delegates with ce_flag=false
- Compute outgoing_ce = incoming_ce || local congestion on next-hop
link, enabling hop-by-hop CE relay through transit nodes
IPv6 ECN-CE marking:
- Mark ECN-CE (0b11) in IPv6 Traffic Class on received DataPackets
before TUN delivery when FMP CE flag is set
- Only marks ECN-capable packets (ECT(0)/ECT(1)); Not-ECT packets
unchanged per RFC 3168
Transport congestion abstraction and UDP kernel drop detection:
- Add TransportCongestion struct to transport layer for transport-
agnostic local congestion indicators
- Replace tokio::UdpSocket with AsyncFd<socket2::Socket> using
libc::recvmsg() with ancillary data parsing
- Enable SO_RXQ_OVFL for kernel receive buffer drop counter on every
packet, wiring up previously-stubbed UdpStats.kernel_drops
- Add TransportDropState for per-transport delta tracking with 1s
tick sampling via sample_transport_congestion()
- Extend detect_congestion() with transport kernel drop check
alongside MMP loss metrics
Congestion monitoring and control:
- Add CongestionStats (ce_forwarded, ce_received, congestion_detected,
kernel_drop_events) to NodeStats with snapshot serialization
- Wire counters into forwarding path, session handler, and transport
drop sampling with rate-limited warn logging (5s interval)
- Expose congestion data in show_routing control query and
ecn_ce_count in show_mmp peer entries
- Add congestion counters to fipstop routing tab in two-column layout
Chaos harness integration:
- Add query_routing(), query_transports(), snapshot_all_congestion()
to chaos control module
- Add congestion/kernel-drop log analysis in logs module
- Add congestion-stress scenario: 10-node tree, 1 Mbps bandwidth,
5-10% netem loss, heavy iperf3 traffic
- Add IngressConfig for tc ingress policing with per-peer policer
filters simulating upstream bandwidth bottlenecks
- Add iperf3 JSON result capture to traffic manager for throughput
measurement across scenarios
- Add ECN A/B test scenarios (ecn-ab-on/off.yaml) with ingress
policing and comparison script
- Enable TCP ECN negotiation (tcp_ecn=1 sysctl) in container
entrypoint for end-to-end CE propagation
Tests:
- 10 ECN unit/integration tests: mark_ipv6_ecn_ce variants, CE relay
chain (3-node propagation), EcnConfig serde roundtrip
- 3 transport drop congestion detection unit tests
Documentation:
- Update fips-mesh-layer.md: replace outdated CE Echo stub with full
ECN Congestion Signaling section covering detection logic, CE relay,
IPv6 marking, session tracking, and monitoring counters
- Update fips-configuration.md: add node.ecn.* parameter table and
ecn block in complete reference YAML
- Update fips-transport-layer.md: add Congestion Reporting section
with TransportCongestion struct, congestion() trait method, and
per-transport status; document AsyncFd/recvmsg/SO_RXQ_OVFL in UDP
- Update chaos README: add congestion/ECN scenario docs, ingress
traffic control, and iperf3 JSON capture sections
- Update README.md: add ECN to features list and "What works today";
update transport and tooling entries
Non-FIPS clients (e.g., TLS connections) hitting the TCP listen port
produce misleading "unknown FMP phase" errors because the stream reader
checked phase before version. A TLS ClientHello (byte 0x16) parsed as
version=1, phase=6.
Add UnknownVersion error variant and check the version nibble before
phase dispatch, so non-FIPS connections now report "unknown FMP version: 1"
instead of "unknown FMP phase: 0x06".
Ethernet requires a minimum 46-byte payload (60-byte frame minus
14-byte header). NICs/drivers pad shorter frames with zeros. The
Ethernet transport had no length field, so the receiver included
padding bytes in the ciphertext, causing AEAD (ChaCha20-Poly1305)
authentication tag mismatch on small frames like heartbeats (39 bytes
with prefix, padded to 46).
Add a 2-byte little-endian payload length field after the frame type
byte. Wire format changes from [type:1][payload] to
[type:1][length:2 LE][payload]. The receiver uses the length field to
extract exactly the right number of bytes, ignoring any NIC padding.
Frame overhead increases from 1 to 3 bytes, effective MTU adjusted
accordingly. This is a wire-format breaking change requiring
simultaneous upgrade of all Ethernet peers.
Implement TCP transport for FIPS enabling firewall traversal and serving
as the foundation for future Tor transport. This is the first
connection-oriented transport in the system.
Key design decisions:
- FMP header-based framing: reuses existing 4-byte FMP common prefix for
packet boundary recovery with zero framing overhead
- Session survives TCP reconnection: Noise/MMP/FSP state bound to npub,
not TCP connection; MMP liveness is sole authority for peer death
- Connect-on-send: fresh connection on first send, transparent reconnect
- close_connection() trait method for cross-connection deduplication cleanup
New transport files:
- src/transport/tcp/mod.rs: TcpTransport, connection pool, accept loop
- src/transport/tcp/stream.rs: FMP-aware stream reader (shared with Tor)
Modified: transport trait (close_connection), TcpConfig, TransportHandle
match arms, create_transports(), initiate_connection() for connection-
oriented links, cross-connection tie-breaker cleanup, design docs.
Tree announce loop and TCP stability fixes:
- Preserve tree announce rate-limit state across reconnection: carry
forward last_tree_announce_sent_ms when a peer reconnects so the
rate-limit window isn't reset to zero
- Drop oversize TCP packets at sender: pre-send MTU check returns
MtuExceeded instead of writing to the stream, preventing receiver-side
connection teardown and reset-reconnect cycles
Chaos harness:
- TCP transport support: tcp_edges/has_tcp/tcp_peers in SimTopology,
transport-aware config_gen with per-edge transport type, TCP port 443,
pure-TCP node support
- Include all non-Ethernet edges in directed_outbound()
- Fix netem/links log messages to say "IP-based" instead of "UDP"
- Add tcp-chain, tcp-only, and tcp-mesh scenario files
Static harness:
- Transport-aware config generation (get_default_transport, transport_port)
- TCP transport injection via Python post-processing
- Add tcp-chain topology and docker-compose profile
When a peer container is restarted during node churn, the veth pair is
destroyed and recreated. The beacon sender's AF_PACKET socket becomes
stale, producing ENXIO (os error 6) on every send with no recovery.
The beacon sender loop now tracks consecutive send errors and, after 3
consecutive ENXIO failures, attempts to open a fresh AF_PACKET socket
on the same interface. Only the first error in a streak is logged at
warn level to avoid log spam. On successful reopen, beacons resume
normally, allowing peer rediscovery.
Also adds reopen_beacon_socket() helper that creates and wraps a new
PacketSocket without needing access to the EthernetTransport struct.
Update the default UDP bind port from 4000 to 2121 (decimal) and the
default Ethernet EtherType from 0x88B5 to 0x2121 across all source
code, documentation, configuration templates, test fixtures, and
scripts. Remove references to "IEEE 802 experimental range" since
0x2121 is not in that range.
- Ethernet ioctl: cfg-gate the ioctl request parameter type — c_int on
musl, c_ulong on gnu — so the same code compiles on both
x86_64-unknown-linux-gnu and x86_64-unknown-linux-musl targets
- Chaos harness macOS support: replace direct host 'ip link' invocations
with a privileged Docker container helper (--net=host --pid=host) that
shares the Docker VM's namespaces, making veth pair setup work on both
Linux and macOS (where host 'ip' is unavailable and container PIDs
live inside the Docker Desktop VM)
- Python 3.9 compat: add 'from __future__ import annotations' to
docker_exec.py for X|Y union syntax support
- Add deploy/ to .gitignore
Co-authored-by: origami74 <origami74@gmail.com>
Implement raw Ethernet transport using AF_PACKET SOCK_DGRAM on Linux
with EtherType 0x88B5 (IEEE experimental range) and 1-byte frame type
prefix (0x00=data, 0x01=beacon).
Transport implementation:
- EthernetConfig with interface, ethertype, MTU, buffer sizes, and
four independent discovery knobs (discovery, announce, auto_connect,
accept_connections)
- PacketSocket/AsyncPacketSocket wrappers with ioctl helpers for
interface index, MAC address, and MTU queries
- EthernetTransport with Transport trait impl, async start/stop/send,
receive loop dispatching data frames and discovery beacons
- Discovery beacons (34 bytes: type + version + x-only pubkey) with
DiscoveryBuffer for peer accumulation and dedup
- Atomic statistics counters (frames, bytes, errors, beacons)
- Platform-gated with #[cfg(target_os = "linux")]
Transport-layer discovery integration:
- Promote auto_connect() and accept_connections() to Transport trait
with default implementations and TransportHandle dispatch
- Extract initiate_connection() so both static peer config and
discovery auto-connect share the same handshake initiation path
- Add poll_transport_discovery() to the tick handler to drain
discovery buffers and auto-connect to discovered peers
- Enforce accept_connections() in handle_msg1() — transports with
accept_connections=false silently drop inbound handshakes
Node integration:
- create_transports() handles Ethernet named instances
- resolve_ethernet_addr() parses "interface/mac" address format
- transport_mtu() generalized for multi-transport operation
Test harness:
- VethPair RAII struct for veth pair lifecycle management
- Three #[ignore] integration tests requiring root/CAP_NET_RAW:
two-node handshake, data exchange, mixed transport coexistence
- Chaos harness: transport-aware topology model, VethManager for
veth pairs between Docker containers, Ethernet-aware config gen,
netem split (HTB+u32 for UDP, root netem for veth), transport-aware
link flaps and node churn with veth re-setup
- Container entrypoint waits for configured Ethernet interfaces
before starting FIPS (handles veth creation timing)
- New scenarios: ethernet-only (4-node ring), ethernet-mesh (6-node
mixed UDP+Ethernet with netem and link flaps)
Documentation:
- fips-transport-layer.md: Ethernet section, beacon discovery, WiFi
compatibility, updated discovery state, trait surface additions,
implementation status table
- fips-configuration.md: Ethernet parameter table, named instances,
peer address format, mixed UDP+Ethernet example, complete reference
- fips-wire-formats.md: Ethernet frame type prefix note
Add link_mtu(&TransportAddr) method to the Transport trait with a
default implementation that falls back to the transport-wide mtu().
This enables transports like BLE to report per-connection MTU values
while maintaining backward compatibility for UDP and other transports
that use a single MTU for all links.
Update the forwarding and session send paths to query link_mtu() with
the next-hop peer's current address, falling back to transport-wide
mtu() when no address is available.
Log a warning when the kernel clamps SO_RCVBUF or SO_SNDBUF below
the requested size, directing the operator to increase rmem_max or
wmem_max. Document buffer size defaults and sysctl requirements in
the Docker config template.
Under high-throughput forwarding, the kernel default 212KB receive
buffer overflows, silently dropping ~11% of UDP datagrams at transit
nodes. Add configurable recv_buf_size and send_buf_size to UdpConfig
(default 2MB each) using socket2 for pre-bind buffer configuration.
Startup log now reports actual buffer sizes granted by the kernel.
Requires net.core.rmem_max >= 2097152 on the host for the full 2MB
to take effect; otherwise the kernel silently clamps.
Per-packet happy-path events (UDP send/receive, TUN I/O, MMP report
processing, TreeAnnounce/FilterAnnounce sent, RTT samples) moved from
debug to trace. Periodic maintenance and retry scheduling moved from
info to debug. Session state changes (established, initiated, torn
down) and transport stop promoted from debug to info. MMP report send
failures demoted from warn to debug (normal under churn).
Wire format:
- Add HandshakeMessageType enum (NoiseIKMsg1=0x01, NoiseIKMsg2=0x02)
- Define unified TLV framing for handshake and post-handshake messages
- Update fips-design.md and fips-protocol-flow.md with wire format details
Initialization:
- Defer TUN setup until after peer connections initiated
- Order: packet channel → transports → peers → TUN
Logging cleanup:
- Consolidate node/TUN info logs into aligned multi-line format
- TUN shutdown: single start/stop message, remove intermediate noise
- Remove ip link show callout and redundant Starting node message
- Change UDP transport stopped to debug level
- Add name field to UdpTransport for named config instances
- Add name() and local_addr() accessors to TransportHandle
- Update UdpTransport logging to include instance name
- Remove redundant Node-level transport startup logging
- Reorder Node::start() to initialize transports before TUN
- Added TransportHandle enum for polymorphic transport dispatch
- Node now owns transports via HashMap<TransportId, TransportHandle>
- Added packet channel fields (packet_tx, packet_rx) to Node
- Transport initialization in Node::start() with graceful degradation
- Transport shutdown in Node::stop() before TUN cleanup
- Factory method create_transports() instantiates from config
Configuration redesign:
- New transports section with TransportInstances<T> enum
- Single instance: config directly under transport type (no naming overhead)
- Named instances: nested under instance names
- #[serde(deny_unknown_fields)] ensures correct untagged enum matching
- Instance names are Option<&str> - None for single, Some(name) for named
Updated Node transport methods:
- transport_count(), get_transport(), get_transport_mut()
- transport_ids(), packet_rx()
All 189 tests pass (4 new config parsing tests).
- Convert transport.rs to module directory (transport/mod.rs + transport/udp.rs)
- Add packet channel types for transport→Node communication:
- ReceivedPacket struct with transport_id, remote_addr, data, timestamp
- PacketTx/PacketRx type aliases for tokio mpsc channels
- packet_channel() constructor function
- Add UdpConfig to config.rs (enabled, bind_addr, mtu)
- Implement UdpTransport with async lifecycle:
- start_async(): binds socket, spawns receive loop
- stop_async(): aborts receive task, closes socket
- send_async(): sends packet with MTU validation
- discover(): returns empty (peer config is node-level)
- Update lib.rs with new re-exports
- Add tokio net and time features to Cargo.toml
All 185 tests pass.
Johnathan Corgan
Martti MalmiandDev
OceanSlimandGitHub
Origami74
SatsAndSportsandGitHub
