Forward-merge the master-line bloom relocation into the next line,
discarding next's v1.5 bloom draft (RLE codec, XOR-diff delta,
FilterNack/0x21, adaptive sizing) and converging both lines onto the
identical proto/bloom v1-sans-IO module. This is a deliberate,
temporary wire regression on the next line: the v2 bloom is rebuilt
fresh, sans-IO from day one, on both lines later. Nothing outside the
bloom feature depended on the v1.5-specific surface. proto/bloom is now
byte-identical across both integration lines.
Add a Loopback variant to TransportHandle backed by an unbounded
in-process channel and a shared address-to-receiver registry, so
node-level multi-node tests deliver packets directly between nodes
instead of over real localhost UDP sockets. This removes the kernel
UDP receive-buffer overflow that dropped handshake packets when many
tests ran in parallel under CPU contention, and lets the large-network
convergence tests run reliably in the default suite again (their
parallel-load ignore markers are removed).
The new transport and its enum variant are cfg(test)-gated, so the
daemon build is unaffected.
The FMP rekey msg1 resend driver retransmitted indefinitely with no cap
and no abandon, so a rekey that never completed kept resending msg1
forever. Give it a retransmission budget: cap resends at
handshake_max_resends with exponential backoff and abandon the rekey
cycle cleanly once the budget is exhausted, mirroring the FSP session
rekey msg3 driver.
With the cap in place the link-dead heartbeat can safely become
rekey-aware: check_link_heartbeats now suppresses teardown while a rekey
is in progress with msg1 budget remaining, instead of reaping a link
that is still actively carrying rekey-handshake traffic. The suppression
terminates deterministically (the budget abandons on exhaustion, cutover
clears the in-progress flag), so a genuinely dead link is still reaped on
the next cycle.
Adds a rekey_msg1_resend_count counter on ActivePeer reset at every
rekey-clear and cutover site, msg1 resend-budget unit tests, and two-node
heartbeat suppression/resume/regression integration tests.
Bring the immutable-state single-store change onto the Noise XX line.
The shared NodeContext is now the sole store; this merge applies the
next-only adaptations the master-side change couldn't carry:
- Remove node_profile from the Node struct (next-only field) so it lives
solely in NodeContext; migrate its readers (tree/bloom/discovery/
handshake negotiation) onto the node_profile() accessor. The two FMP
negotiation sites hoist node_profile() into a local to avoid borrowing
&self while a connection is mutably borrowed.
- leaf_only sets both is_leaf_only and node_profile via the context swap.
- Preserve the XX handshake/rekey structure (no identity-in-msg1; XX/XK
initiator/responder constructors) while applying the startup_epoch()
accessor migration.
- Tests: route profile selection through a make_test_node_with_profile
helper (profile is immutable, set via Config flags) instead of poking
the removed field.
cargo test --lib 1369/0; clippy -D warnings and release build clean.
Remove the duplicated immutable fields (config, identity, startup_epoch,
started_at, is_leaf_only, max_connections/peers/links) from the Node
struct so the Arc<NodeContext> bundle is the single source of truth.
Previously Node owned these fields and a parallel context copy, kept in
lockstep by rebuild_context() at every mutation site — pure overhead that
existed only because of the duplication.
- Replace rebuild_context() with replace_context(): a clone-edit-swap of
the whole Arc. The per-instance context stays immutable; mutation swaps
the Arc. This is the sole runtime mutation path (constructors, leaf_only,
update_peers).
- Add Copy-returning accessors startup_epoch() and max_connections()/
max_peers()/max_links(); migrate the remaining direct field readers onto
the accessors. node_addr()/npub()/Debug now read identity/is_leaf_only
from the context.
- update_peers reads the pre-update peer set from the live context Arc
before building a fresh Config + context and swapping — preserving the
read-before-write ordering its mutation-window test depends on.
- Remove the test-only set_max_* setters; tests set the limits on Config at
construction instead (new make_node_with_max_peers/links helpers).
- Add a ci-local guard that fails if the Node struct re-declares a bundled
field, so the single-store invariant can't silently regress.
cargo test --lib 1291/0; clippy -D warnings and release build clean.
Store node counters in an atomic metric registry read through &self, and
introduce a shared NodeContext bundle holding the effectively-immutable
fields (config, identity, startup epoch, node profile, capability limits).
Source the immutable config and identity reads across the receive hot
path, the XX handshake/session/rekey state machines, and the discovery,
tree, bloom, retry, and lifecycle modules through the context accessors.
Includes the bloom delta/full/NACK/resize and byte-total counters in the
registry. The Node fields and the context are rebuilt in lockstep at every
mutation site.
Store node counters in an atomic metric registry read through &self, and
introduce a shared NodeContext bundle holding the effectively-immutable
fields (config, identity, startup epoch, capability limits). Source the
immutable config and identity reads across the receive hot path, the
handshake/session/mmp/encrypted state machines, and the discovery, tree,
bloom, retry, and lifecycle modules through the context accessors rather
than direct field reads. The Node fields and the context are rebuilt in
lockstep at every mutation site.
Cover the security-relevant defensive signal: sustained decrypt
failures indicate key drift or active probing; threshold-trip force-
removes the peer.
src/peer/active.rs (+43): two unit tests on the counter struct itself
- test_increment_decrypt_failures_monotonic asserts each
increment_decrypt_failures() call returns count+1 for at least 25
iterations
- test_reset_decrypt_failures_zeroes_counter asserts the reset
helper zeroes a non-zero counter and is idempotent
src/node/tests/decrypt_failure.rs (new, 93 lines): end-to-end test
- Builds a Node + connected peer via existing make_completed_connection
/ add_connection / promote_connection harness so peers_by_index is
exercised, not just peers
- Drives the peer to threshold-20 by calling handle_decrypt_failure 20
times; asserts iterations 1..20 leave the peer registered with
monotonically increasing counter, then iteration 20 evicts from both
peers and peers_by_index
src/node/handlers/encrypted.rs: visibility-only widen on
handle_decrypt_failure from private to pub(in crate::node) so the
in-tree test can drive the threshold logic without re-implementing
it. Same pattern as the already-pub(in crate::node)
handle_encrypted_frame in the same file.
Threshold pinned: DECRYPT_FAILURE_THRESHOLD = 20 at
src/node/handlers/encrypted.rs:11.
Optional peer discovery and NAT hole-punching path gated behind a new
`nostr-discovery` cargo feature. Nodes publish signed overlay endpoint
adverts to public Nostr relays, consume peer adverts to populate
fallback dial addresses, and use STUN-assisted UDP hole punching with
NIP-59 gift-wrap offer/answer signaling to establish direct UDP paths
between NATed peers. Once a punched socket is up, it is handed into
the existing FIPS UDP transport and the standard Noise/FMP session
stack takes over unchanged.
The cargo feature is in the default feature set
(`default = ["nostr-discovery"]`) so stock builds include it; a
build that explicitly disables default features (or selects a
feature set without `nostr-discovery`) does not link the nostr /
nostr-sdk crates and does not emit a no-op poll in the tick loop.
Runtime behavior is independently gated by
`node.discovery.nostr.enabled`, which defaults to false; if the
config enables Nostr on a non-feature build, startup logs a
warning and continues without it.
== Cargo feature and dependencies
- New cargo feature `nostr-discovery = ["dep:nostr", "dep:nostr-sdk"]`.
Not in the default feature set.
- New optional Linux-only dependencies: `nostr 0.44` (features: std,
nip59) and `nostr-sdk 0.44`. Gift-wrap unwrap is hand-rolled in
`src/discovery/nostr/signal.rs` rather than relying on the SDK's
rumor-author check, which FIPS sidesteps by trusting `seal.pubkey`
exclusively.
== Wire format
Overlay advert event: `kind 37195`, parameterized replaceable
(NIP-01 application-defined replaceable range 30000-39999), with
`d = "fips-overlay-v1"`. The digits visually spell FIPS (7=F, 1=I,
9=P, 5=S); a relay survey confirmed the kind is unused.
Advert content carries the version tag, endpoint list
(`udp|tcp|tor` + addr), optional signal-relay and stun-server
metadata, and `issuedAt` / `expiresAt` timestamps. Endpoint
`addr: "nat"` is the sentinel that triggers traversal on the peer
side. NIP-40 `expiration` tag bounds staleness on permanent
shutdown. Lifecycle relies on parameterized-replaceable
supersession; the daemon does not emit NIP-09 kind-5 deletes —
strict relays (Damus, Primal) race delete-against-replace and can
silently drop the replacement.
Gift-wrapped signal event: `kind 21059`. Punch packets carry magic
values `PUNCH_MAGIC` / `PUNCH_ACK_MAGIC`, a sequence number, and a
16-byte session hash.
== Discovery surface
- `src/discovery.rs` (always compiled)
- `EstablishedTraversal`: bound UDP socket + selected remote +
peer npub + optional transport name/config tuning overrides.
- `BootstrapHandoffResult`: returned on successful handoff —
allocated transport id, local/remote addrs, peer NodeAddr,
session id.
- `src/discovery/nostr/` (`#![cfg(feature = "nostr-discovery")]`)
- `types.rs`: wire and control types described above. `ADVERT_KIND`
constant. `BootstrapError` enumerates failure modes (disabled,
missing advert, missing NAT endpoint, no usable relays, invalid
advert, invalid npub, signal timeout, punch timeout, replay,
STUN failure, protocol, nostr, io, serde, event-parse).
- `runtime.rs`: `NostrDiscovery` coordinator. Owns the shared
nostr-sdk `Client`, subscribes to advert + signal event kinds,
maintains a bounded advert cache and a bounded seen-sessions
replay set, drains `BootstrapEvent::{Established, Failed}` for
the node to consume, exposes `update_local_advert`,
`request_connect`, `advert_endpoints_for_peer`,
`cached_open_discovery_candidates`, and `shutdown`.
- `signal.rs`: NIP-59 gift-wrap encode/decode. Outbound wraps are
built against per-attempt ephemeral keys; inbound events are
unwrapped against the node identity.
- `stun.rs`: RFC 5389/8489 Binding Request client with
XOR-MAPPED-ADDRESS parsing for both IPv4 and IPv6; used only to
observe the initiator's own reflexive address against its
locally configured STUN list (peer-advertised STUN is
informational, never an egress target).
- `traversal.rs`: per-attempt candidate-pair punch planner.
Allocates a fresh `0.0.0.0:0` UDP socket per attempt, enumerates
LAN-private and ULA interface addresses alongside the STUN
reflexive address, schedules probe/ack exchanges at the
configured interval for the configured duration, and picks the
first candidate pair that authenticates end-to-end.
Strategy ordering is Reflexive↔Reflexive first, then LAN, then
Mixed. The STUN-observed pair is the only candidate that's reliable
across arbitrary network topologies; trying it first prevents the
planner from latching onto a misleading host-candidate path before
the reflexive path gets a chance. There is no catch-all
Local↔Local strategy: a previous design that paired every local
host candidate from one side with every local host candidate from
the other could declare success on a one-way reachable asymmetric
L3 path (corporate VPN, Tailscale subnet route, overlapping private
address space), only for the FMP handshake to stall because the
return path didn't match. The legitimate `Lan` strategy still pairs
candidates that share a subnet.
== Configuration surface
`node.discovery.nostr.*` (`NostrDiscoveryConfig`), all `serde(default)`
with `deny_unknown_fields`:
- `enabled` (default false), `advertise` (default true)
- `advert_relays`, `dm_relays`, `stun_servers`: defaults are
`wss://relay.damus.io`, `wss://nos.lol`, `wss://offchain.pub`
for both relay lists, and Google / Cloudflare / Twilio for STUN.
Operators are expected to override for production. Other
verified-working public relays for reference:
`nostr.bitcoiner.social`, `nostr-pub.wellorder.net`,
`nostr.oxtr.dev`, `nostr.mom`.
- `app` (default `"fips-overlay-v1"`), `signal_ttl_secs` (120)
- `policy`: `NostrDiscoveryPolicy::{Disabled, ConfiguredOnly (default),
Open}` — controls whether advert-derived endpoints are consumed
only for peers carrying `via_nostr = true`, or also for
non-configured peers within a budget cap.
- `share_local_candidates` (default false) — when false, the offer's
`local_addresses` list is empty and peers see only the reflexive
address. Enable per-node only for genuinely same-LAN deployments;
off-by-default eliminates the misleading-path failure mode for
the common case where peers are not on the same broadcast domain.
- `open_discovery_max_pending` (64) — caps queued open-discovery
retries; bounded by available outbound slots.
- `max_concurrent_incoming_offers` (16) — semaphore against offer
spam; excess offers are debug-logged and dropped.
- `advert_cache_max_entries` (2048) and `seen_sessions_max_entries`
(2048) — bound memory under ambient relay volume; overflow
evictions are debug-logged.
- `attempt_timeout_secs` (10), `replay_window_secs` (300)
- `punch_start_delay_ms` (2000), `punch_interval_ms` (200),
`punch_duration_ms` (10000)
- `advert_ttl_secs` (3600), `advert_refresh_secs` (1800)
Per-peer and per-transport flags:
- `PeerConfig.via_nostr: bool` — when true (and Nostr is enabled),
advert-derived addresses are appended as fallback dial candidates
after static addresses for that peer.
- `PeerConfig.addresses` is now `serde(default)` and may be empty
when `via_nostr: true`; validation requires at least one of the
two to be present per peer, and the error message names the
peer's npub.
- `UdpConfig.advertise_on_nostr: Option<bool>` and
`UdpConfig.public: Option<bool>` — UDP transports can be
advertised either as direct `host:port` (public = true) or as the
`addr: "nat"` sentinel that triggers rendezvous on the peer side.
- `TcpConfig.advertise_on_nostr` and `TorConfig.advertise_on_nostr`
— TCP and Tor onion endpoints can be advertised as directly
reachable.
- A reserved peer address `transport: udp, addr: "nat"` parses without
special-casing in YAML and routes through the bootstrap runtime.
Cross-field validation (`Config::validate`, called from `Node::new`
and `Node::with_identity`):
- Any transport with `advertise_on_nostr = true` requires
`node.discovery.nostr.enabled = true`.
- Any peer with `via_nostr = true` requires
`node.discovery.nostr.enabled = true`.
- A non-public UDP advert (`advertise_on_nostr = true`,
`public = false` — i.e. `udp:nat`) additionally requires at least
one `dm_relay` and at least one `stun_server`.
Surfaced as `ConfigError::Validation`.
== Node integration
`src/node/lifecycle.rs` is the main integration point.
- At node start (after transports are up, before TUN), if Nostr is
enabled and the feature is compiled in, `NostrDiscovery::start` is
invoked, the initial local overlay advert is built from the live
transport set and published, and the runtime handle is stored.
- The rx tick loop calls `poll_nostr_discovery` (feature-gated both
at method definition and call site), which refreshes the local
advert, drains bootstrap events, adopts established traversals,
schedules retries for failed traversals, and — under `policy:
open` — enqueues outbound retries for non-configured peers
visible in the advert cache, bounded by
`open_discovery_max_pending` and the remaining outbound slots.
- Outbound peer dialing is refactored to `try_peer_addresses`, which
first exhausts the static address list in priority order and only
then appends advert-derived fallback addresses; both lists run
through the same `attempt_peer_address_list` code path. The
`udp:nat` sentinel address triggers `NostrDiscovery::request_connect`
for the peer instead of a direct dial and returns `Ok(())`.
- `build_overlay_advert` walks operational transports, consults
per-instance `UdpConfig` / `TcpConfig` / `TorConfig` (matching by
optional transport instance name), and emits an `OverlayAdvert`
including `signalRelays` and `stunServers` when any UDP endpoint
is advertised as NAT.
- `adopt_established_traversal` is the bootstrap handoff API:
allocates a new `TransportId`, constructs a `UdpTransport` with
the user-supplied (or default) `UdpConfig`, calls the new
`adopt_socket_async` to reuse the punched socket verbatim,
registers the transport in the normal transport map, records it
in `bootstrap_transports`, and calls `initiate_connection` so the
normal handshake path runs. On failure, the transport is stopped
and removed cleanly and the set membership is rolled back.
- On clean shutdown, `NostrDiscovery::shutdown` is awaited so
background tasks stop before transports are torn down. (The
advert is not explicitly retracted; NIP-40 expiration plus the
next refresh from any live publisher supersedes it.)
New `Node` fields:
- `nostr_discovery: Option<Arc<NostrDiscovery>>` (feature-gated).
- `bootstrap_transports: HashSet<TransportId>` — per-peer UDP
transports adopted from NAT traversal, cleaned up via
`cleanup_bootstrap_transport_if_unused` whenever the link,
connection, peer, or pending-connect referencing them is removed.
Retry and error surface:
- `RetryState.expires_at_ms: Option<u64>` — optional absolute expiry
for a retry entry. `pump_retries` drops expired entries with an
info log. Used for open-discovery retries, which expire at two
times the advert TTL.
- New `NodeError::BootstrapHandoff(String)` returned from
`adopt_established_traversal` when the underlying transport
adoption fails or local address discovery fails.
- New `ConfigError::Validation(String)`.
- A small refactor extracts `Node::now_ms()` and reuses it across
lifecycle, rx-loop tick, and timeout bookkeeping.
== UDP transport
`src/transport/udp/`:
- `UdpRawSocket::adopt(std::net::UdpSocket, recv_buf, send_buf)`:
adopts an externally bound socket, makes it non-blocking, applies
the configured buffer sizes (warning if the kernel clamps), and
reports the resulting local address. Preserves the NAT mapping —
no rebind.
- `UdpTransport::adopt_socket_async(std::net::UdpSocket)`: the
`start_async` analogue for an already-bound socket, wiring the
async socket and recv task exactly as the fresh-bind path would.
- `Drop` impl for `UdpTransport`: if a transport is dropped while
still holding a recv task or socket (for example on error
teardown), aborts the task, clears the socket, and emits a debug
log so the cleanup is visible in tracing rather than silent.
== Logging and observability
Default `EnvFilter` demotes third-party relay-pool DEBUG output to
TRACE-only: `nostr_relay_pool`, `nostr_sdk`, and `nostr` are pinned
at INFO when our level is anything below TRACE, and at TRACE when
our level is TRACE — so the raw frames are still reachable when
explicitly asked for. RUST_LOG continues to override completely.
Concise one-line DEBUG events are emitted at the meaningful points
in the discovery / hole-punch sequence:
- `advert: published` (event id, relay count, endpoints, ttl)
- `advert: peer cached` (notify-loop ingress for non-self)
- `advert: resolved` (cache hit / relay fetch outcome)
- `traversal: initiator starting`
- `traversal: initiator STUN observed` (reflexive, local count)
- `traversal: offer sent` (session id, relay count, event id)
- `traversal: answer received` (accepted, reflexive, local)
- `traversal: initiator punch succeeded` (remote addr)
- `traversal: offer received` (responder side)
- `traversal: responder STUN observed`
- `traversal: answer sent`
- `traversal: responder punch succeeded`
Npubs are shortened to `npub1<4>..<4>` and event/session ids to
their first 8 hex characters.
Other operator-facing logs:
- `UdpTransport` adoption and drop paths log at info / debug.
- `adopt_established_traversal` logs at debug on entry and info on
successful return, tagged with peer npub, session id, transport
id, and both socket endpoints, so the bootstrap handoff is
traceable end-to-end alongside the `UdpTransport::drop` log.
- `cleanup_bootstrap_transport_if_unused` logs at debug when the
reference-count check drops an adopted transport.
- `connect_peer` tags its entry `debug!` with `peer_npub` so
downstream STUN, punch, and handshake logs for the same peer
correlate for operators.
- Advert-cache and seen-sessions overflow evictions log at debug so
mis-sized caps are visible under ambient relay volume.
- Gift-wrap unwrap failures on `SIGNAL_KIND` events log at trace
(hot path: fires for every unrelated signal event on the same
relay).
- Traversal-offer handler failures log at debug. Expected conditions
such as punch timeout on symmetric NAT are covered there; real
problems are reported upstream via `BootstrapEvent::Failed`.
- Inbound-offer rate-limit messages name the governing config field
(`max_concurrent_incoming_offers`) and state that the offer was
rate-limited rather than failing.
== Tests
- 18 new unit tests in `src/discovery/nostr/tests.rs` covering advert
encoding, signal envelope round-trip, STUN parsing, punch-packet
codec, and replay-window enforcement. Run under the
`nostr-discovery` feature.
- Config-validation tests in `src/config/mod.rs` covering the three
cross-field invariants and YAML parsing of the full
`node.discovery.nostr` block plus `peers[].via_nostr`, empty
`addresses` with `via_nostr: true`, and a `udp: nat` address.
- `src/node/tests/bootstrap.rs` integration tests that drive a
synthetic traversal (bound UDP socket pair + synthetic peer
identity) through `adopt_established_traversal` and assert the
Noise handshake completes over the adopted socket.
- Punch-planner tests assert reflexive-before-LAN ordering and that
same-LAN scenarios still include the LAN target in the plan.
- `testing/nat/` Docker NAT lab harness:
- Local `strfry` relay, local STUN responder, and one or two
router containers performing `iptables` NAT.
- Node LAN interfaces are provisioned with explicit `veth` pairs
injected into the node and router namespaces so every packet
traverses the router namespace (plain Docker bridges are not
used for the LAN).
- `cone` scenario: both peers behind full-cone-emulation NAT
(SNAT with source-port preservation, inbound DNAT back to the
single LAN host regardless of remote source); asserts UDP
traversal succeeds and link remote addresses are on the router
WAN subnet.
- `symmetric` scenario: `MASQUERADE --random-fully`; asserts UDP
traversal fails and TCP fallback converges over router-
published WAN addresses.
- `lan` scenario: both peers share a LAN subnet; asserts LAN
addresses are preferred over reflexive ones.
- Cleanup tears down all profile-gated services
(`--profile cone --profile symmetric --profile lan`) so no
orphan containers survive a run.
- `testing/scripts/build.sh` builds the Docker test image with
`--features "tui nostr-discovery"` by default so NAT-harness
binaries include bootstrap support.
== CI
- Linux release build and nextest unit-test job both use
`--features "gateway nostr-discovery"` so the feature-gated code
and its unit tests compile and run in CI.
- Three new integration matrix entries (`nat-cone`, `nat-symmetric`,
`nat-lan`) invoke `testing/nat/scripts/nat-test.sh`, collect
`docker compose logs` on failure, and always stop containers.
== Packaging and operations
- `packaging/common/fips.yaml` ships a fully commented
`node.discovery.nostr.*` block, plus documented
`advertise_on_nostr` / `public` examples under the UDP transport,
an `advertise_on_nostr` example under TCP, and a `via_nostr: true`
example under the static peer section with both a direct
`host:port` UDP address and a `udp: nat` fallback.
- `.github/workflows/package-openwrt.yml`: NIP-94 release event
publishes target the new default relay set.
== Documentation
- `README.md`: overlay discovery + NAT traversal moved from
"Near-term priorities" into "What works today".
- `docs/design/fips-intro.md`: rewrites the paragraphs that
previously described Nostr discovery and NAT traversal as future
work; describes the shipped mechanism and the feature gate.
- `docs/design/fips-transport-layer.md`: drops the "(future
direction)" qualifier from the Nostr Relay Discovery section,
expands with the `udp:nat` advertisement and bootstrap handoff
description, and updates the Current State callout.
- `docs/design/fips-mesh-layer.md`: notes that mid-session NAT
rebinding (roaming) and initial NAT traversal (Nostr path) are
distinct mechanisms.
- `docs/design/fips-configuration.md`: documents the full
`node.discovery.nostr.*` surface, including the three resource
caps and `share_local_candidates`.
- `docs/design/fips-nostr-discovery.md`: design and configuration
reference for the shipped mechanism, including the empty-
`addresses`-with-`via_nostr` shorthand.
- `docs/proposals/nostr-udp-hole-punch-protocol.md`: adds an
Implemented status callout, clarifies that the punch socket is
per-peer and per-attempt rather than shared with the application
listener, aligns field names with the shipped JSON
(`sessionId`, `issuedAt` / `expiresAt`, `reflexiveAddress`,
`localAddresses`, `stunServer`), sets the `d`-tag to
`fips-overlay-v1`, names the kind as 37195, and notes that
advertised STUN entries are informational.
- `docs/proposals/README.md`: adds a Status column and marks the
hole-punching proposal Implemented.
- `CHANGELOG.md`: Unreleased > Added entry covering the discovery
path, STUN/punch path, configuration surface, and Docker NAT lab.
Co-authored-by: Johnathan Corgan <johnathan@corganlabs.com>
src/node/tests/acl.rs was added by PR #50 but never declared in
src/node/tests/mod.rs, so none of its 4 unit tests ran. The tests
themselves still compile and pass against current master code —
the fix is a one-line mod declaration. Test count goes from 1031
to 1035.
No code under test changes. This only adds previously-dormant
coverage of the ACL enforcement call sites (outbound connect,
inbound msg1, outbound msg2).
Under Noise XX the responder only sees the initiator's static key
in msg3, so the inbound-handshake ACL check cannot fire until msg3
has already been processed. By then the initiator has received
msg2, passed its own outbound ACL check, and promoted its side of
the peering. Silently tearing down the responder's state left the
initiator as a "connected" peer with no traffic until the
link-dead timeout fired tens of seconds later; the acl-allowlist
integration test on the next branch timed out at the 5s
convergence check on blocked nodes.
The responder now sends an encrypted Disconnect on the
freshly-completed Noise session before tearing down. The initiator
decodes it via the existing handle_disconnect path and cleans up
the zombie peer within one RTT. DisconnectReason::Other is used
instead of SecurityViolation so the wire payload does not name the
ACL mechanism; the behavioural signature (explicit reject right
after handshake) is the only observable leak.
Supporting changes:
- Add send_encrypted_link_message_raw in node/mod.rs that operates
on a raw NoiseSession + indices without going through self.peers,
since the peer has not yet been promoted at the reject site.
- Declare the acl test module in node/tests/mod.rs. It had been
orphaned since PR #50 so none of its tests ran; two of them no
longer compiled against the current next branch. Fixed the two
and replaced test_inbound_msg1_denied_by_acl (asserts IK-era
behaviour that cannot happen under XX) with
test_inbound_msg3_denied_triggers_disconnect, a full end-to-end
UDP test covering both the responder cleanup and the initiator's
Disconnect-driven cleanup.
A malformed FilterAnnounce whose fill ratio produces an implausibly
high false-positive rate is mostly useless for routing and, once
merged into our outgoing filter via bitwise OR, propagates the
saturated state to tree peers one hop per announce tick. A saturated
filter also made estimated_count() return f64::INFINITY, which
compute_mesh_size summed into its cached estimate.
handle_filter_announce now rejects inbound FilterAnnounce whose
derived FPR exceeds `node.bloom.max_inbound_fpr` (new config field,
default 0.05 ≈ fill 0.549 at k=5). Rejection is silent on the wire,
logs at WARN, and increments a new `bloom.fill_exceeded` counter. The
peer's prior stored filter and filter_sequence are left unchanged so
a single rejected announce does not wipe the peer's existing
contribution to aggregation.
After a successful outgoing FilterAnnounce send, a rate-limited WARN
fires if our own filter's FPR exceeds the same cap, surfacing
aggregation drift. Limited to once per 60 seconds via a new
Node.last_self_warn field.
BloomFilter::estimated_count() now takes max_fpr and returns
Option<f64>. Returns None for saturated filters (regardless of cap)
or when the filter's FPR exceeds max_fpr. Callers updated: debug
logs render None as "—", the Debug impl uses f64::INFINITY as "no
cap" and prints "saturated" instead of inf, control-socket JSON
emits null, and compute_mesh_size propagates None into the already-
Option<u64> estimated_mesh_size field.
Gate platform-specific code behind cfg attributes and add full Windows
support: TUN device via wintun, TCP control socket on localhost:21210,
Windows Service lifecycle (--install-service/--uninstall-service/--service),
CI build and test matrix, and packaging with ZIP builder and PowerShell
service management scripts.
Key changes:
- Cargo.toml: move tun/libc/rtnetlink behind cfg(unix); add wintun and
windows-service dependencies for Windows
- upper/tun.rs: wintun-based TUN implementation with netsh configuration
for IPv6 address, MTU, and fd00::/8 routing
- control/mod.rs: split into unix_impl/windows_impl; Windows uses TCP on
localhost:21210 with shared connection handler
- bin/fips.rs: refactor main() into run_daemon() accepting a shutdown
signal; add Windows Service support via windows-service crate
- transport/udp/socket.rs: platform-gated modules; Windows uses
tokio::net::UdpSocket (kernel drop count unavailable, returns 0)
- transport/ethernet: gate to cfg(unix); add Windows stub types
- config: platform-conditional default paths (socket, hosts) for Windows
- CI: add windows-latest to build matrix and test-windows job with
cargo-nextest
- packaging/windows: build-zip.ps1, install-service.ps1,
uninstall-service.ps1, and package-windows.yml workflow
- README/docs: Windows build instructions, service management, and
control socket platform differences
Linux and macOS behavior is unchanged.
- Delete PROTOCOL_NAME_IK, PROTOCOL_NAME_XK and all IK/XK methods
- Remove Ik/Xk variants from NoisePattern enum
- Rename XX methods to drop xx_ prefix (sole pattern)
- Rename HandshakeMessageType variants from NoiseIKMsg1/NoiseIKMsg2
to Msg1/Msg2, add Msg3 variant (0x03) for XX 3-message flow
- Fix doc comments with correct XX message sizes and descriptions
- Fix stale SessionSetup/SessionAck handshake payload size comments
Replace the 2-message IK handshake with a 3-message XX handshake for
FMP link establishment. XX requires no prior knowledge of the peer's
static key — both identities are revealed during the handshake
(responder in msg2, initiator in msg3). This is the foundation for
the forklift upgrade that enables rolling protocol upgrades.
Changes:
- Noise XX state machine alongside IK/XK (8 unit tests)
- Protocol negotiation payload codec: format byte, packed version
min/max, 64-bit feature bitfield, TLV extensions (11 unit tests)
- FMP wire format version 0→1, msg3 header/builder, TCP stream framing
- FMP handshake switched to XX: PeerConnection 3-message flow,
handle_msg1 simplified (no identity), handle_msg2 sends msg3 and
promotes initiator, new handle_msg3 promotes responder with
restart/rekey/cross-connection detection
- Rekey handshake switched to XX with negotiation payload hash chain
fix (decrypt-and-discard in complete_rekey_msg2/msg3)
- Negotiation payload in msg2/msg3 (FMP version [1,1], features=0)
- Debug logging for handshake promotion paths
- Integration test convergence timeouts adjusted for extra round-trip
Squashed commits:
- Add Noise XX state machine alongside IK/XK
- Add protocol negotiation payload codec
- FMP wire format prep: version 1, msg3 header support
- Switch FMP handshake from Noise IK to XX
- Increase convergence timeouts for XX 3-message handshake
- Fix negotiation hash chain desync in rekey handshake
macOS platform:
- Platform-native TUN interface management with shutdown pipe
- Raw Ethernet transport with macOS socket backend (socket_macos.rs)
- EthernetTransport and TransportHandle::Ethernet ungated from Linux-only
- macOS .pkg packaging (build-pkg.sh, launchd plist, uninstall script)
- CI: macOS build and unit test jobs; x86_64 cross-compiled from
macos-latest via rustup target add x86_64-apple-darwin
Gateway feature flag:
- New opt-in `gateway` Cargo feature activates optional `rustables` dep
- `pub mod gateway` and `Config.gateway` gated behind the feature so
macOS builds never pull in Linux-only nftables bindings
- `fips-gateway` bin has `required-features = ["gateway"]`
- All Linux/OpenWrt/AUR packaging passes `--features gateway`
CI / packaging:
- package-linux, package-macos, package-openwrt now trigger on push to
master/maint/next and on pull requests; release uploads remain tag-gated
- Bloom filter routing fix: fall through to tree routing when no candidate
is strictly closer
- MMP intervals: raise MIN to 1s / MAX to 5s with 5-sample cold-start phase
BLE transport implementation using L2CAP Connection-Oriented Channels
(SeqPacket mode) via the bluer crate, behind cfg(feature = "ble").
Core transport:
- BleTransport<I> generic over BleIo trait (BluerIo prod, MockBleIo test)
- Connection pool with priority eviction (static > discovered, max 7)
- Connect-on-send via connect_inline() matching TCP behavior
- Per-connection receive loops with pool cleanup on disconnect
Discovery and probing:
- Combined scan_probe_loop using select! over scanner events and a
BinaryHeap delay queue with per-entry random jitter (0-5s) to prevent
herd effects when multiple nodes see the same beacon simultaneously
- Pre-handshake pubkey exchange ([0x00][pubkey:32]) for IK identity
- Cross-probe tie-breaker: smaller NodeAddr's outbound wins (same
convention as FMP/FSP rekey dual-initiation)
- Probed peers reported to DiscoveryBuffer; pool fills through normal
node-layer auto-connect -> send_async -> connect_inline path
Beacon management:
- Periodic advertising: 1s burst every 30s (configurable via
beacon_interval_secs / beacon_duration_secs)
- FIPS service UUID for scan filtering
Configuration (all fields optional with defaults):
- adapter, psm, mtu, max_connections, connect_timeout_ms
- advertise, scan, auto_connect, accept_connections
- beacon_interval_secs (30), beacon_duration_secs (1)
Hardware validated with two BLE nodes:
- 2048-byte MTU, ~60-160ms RTT, zero-config auto-connect
- BLE spike tool at testing/ble/ for standalone adapter validation
42 unit tests + 4 node-level integration tests, all CI-compatible
via MockBleIo (no hardware required). tokio test-util added for
time-dependent scan/probe tests.
Five tests covering the full TCP transport stack at the node level:
two-node handshake, three-node chain convergence with bloom filter
reachability, mixed UDP+TCP transport coexistence, MMP link-dead
detection after connection loss, and reconnection after link death
via connect-on-send.
Implement raw Ethernet transport using AF_PACKET SOCK_DGRAM on Linux
with EtherType 0x88B5 (IEEE experimental range) and 1-byte frame type
prefix (0x00=data, 0x01=beacon).
Transport implementation:
- EthernetConfig with interface, ethertype, MTU, buffer sizes, and
four independent discovery knobs (discovery, announce, auto_connect,
accept_connections)
- PacketSocket/AsyncPacketSocket wrappers with ioctl helpers for
interface index, MAC address, and MTU queries
- EthernetTransport with Transport trait impl, async start/stop/send,
receive loop dispatching data frames and discovery beacons
- Discovery beacons (34 bytes: type + version + x-only pubkey) with
DiscoveryBuffer for peer accumulation and dedup
- Atomic statistics counters (frames, bytes, errors, beacons)
- Platform-gated with #[cfg(target_os = "linux")]
Transport-layer discovery integration:
- Promote auto_connect() and accept_connections() to Transport trait
with default implementations and TransportHandle dispatch
- Extract initiate_connection() so both static peer config and
discovery auto-connect share the same handshake initiation path
- Add poll_transport_discovery() to the tick handler to drain
discovery buffers and auto-connect to discovered peers
- Enforce accept_connections() in handle_msg1() — transports with
accept_connections=false silently drop inbound handshakes
Node integration:
- create_transports() handles Ethernet named instances
- resolve_ethernet_addr() parses "interface/mac" address format
- transport_mtu() generalized for multi-transport operation
Test harness:
- VethPair RAII struct for veth pair lifecycle management
- Three #[ignore] integration tests requiring root/CAP_NET_RAW:
two-node handshake, data exchange, mixed transport coexistence
- Chaos harness: transport-aware topology model, VethManager for
veth pairs between Docker containers, Ethernet-aware config gen,
netem split (HTB+u32 for UDP, root netem for veth), transport-aware
link flaps and node churn with veth re-setup
- Container entrypoint waits for configured Ethernet interfaces
before starting FIPS (handles veth creation timing)
- New scenarios: ethernet-only (4-node ring), ethernet-mesh (6-node
mixed UDP+Ethernet with netem and link flaps)
Documentation:
- fips-transport-layer.md: Ethernet section, beacon discovery, WiFi
compatibility, updated discovery state, trait surface additions,
implementation status table
- fips-configuration.md: Ethernet parameter table, named instances,
peer address format, mixed UDP+Ethernet example, complete reference
- fips-wire-formats.md: Ethernet frame type prefix note
Bump rand (0.8→0.10), rtnetlink (0.14→0.20), tun (0.7→0.8),
simple-dns (0.9→0.11), socket2 (0.5→0.6), and criterion (0.5→0.8).
Migrate all rand call sites: thread_rng()→rng(), gen()→random(),
gen_range()→random_range(), RngCore→Rng trait. Work around secp256k1
0.30 requiring rand 0.8 by generating random bytes directly and
constructing SecretKey from slice.
Migrate rtnetlink to builder-based API: LinkSetRequest replaced with
LinkUnspec builder + change(), RouteAddRequest replaced with
RouteMessageBuilder.
Remove bloom benchmark (criterion 0.8 incompatible with old harness
config).
Each node generates a random 8-byte startup epoch, encrypted inside
both Noise IK handshake messages (msg1 and msg2). When a peer's msg1
arrives with a different epoch than the stored value, the node tears
down the stale session and processes the msg1 as a new connection,
enabling near-instant restart detection instead of the 30-second
dead timeout.
Wire format impact:
- msg1: 82 -> 106 bytes (added 24-byte encrypted epoch after ss DH)
- msg2: 33 -> 57 bytes (added 24-byte encrypted epoch after se DH)
- Wire msg1: 90 -> 114 bytes, wire msg2: 45 -> 69 bytes
Implement Noise IK session handshake between arbitrary endpoints, carried
inside SessionDatagram envelopes through the mesh. Sessions use a three-state
machine (Initiating → Established for initiator, Responding → Established
for responder on first DataPacket). Includes session initiation API,
encrypted data transfer, simultaneous initiation tie-break, error signal
handlers (CoordsRequired, PathBroken), and local delivery wiring in the
forwarding handler.
New files: node/session.rs (state types), handlers/session.rs (~500 lines,
all session message handlers + send path), tests/session.rs (11 tests).
100-node integration test establishes sessions across random topology,
sends bidirectional encrypted datagrams through injected TUN channels,
and verifies 200/200 deliveries with 100% session establishment. Reports
routing statistics including avg 4.1 link hops per datagram.
404 tests pass (up from 393).
Add handle_session_datagram handler replacing the 0x40 dispatch stub.
Transit nodes now decode the datagram envelope, enforce hop limits,
warm coordinate caches from SessionSetup/SessionAck/DataPacket payloads,
route via find_next_hop, and generate CoordsRequired/PathBroken error
signals on routing failure.
14 new tests covering decode errors, hop limit enforcement, local
delivery, cache warming for all session message types, single-hop and
multi-hop forwarding through live node chains, error signal generation,
and cache warming enabling subsequent routing. 375 tests pass.
Add the full next-hop routing algorithm to Node::find_next_hop():
- Local delivery, direct peer, bloom filter candidates, greedy tree
routing fallback, with (link_cost, tree_distance, node_addr) ordering
- select_best_candidate() scores by peer→dest distance (not us→peer)
with self-distance check to prevent routing loops
- TreeState::find_next_hop() for greedy tree routing with progress
guarantee
- ActivePeer::link_cost() placeholder (constant 1.0) for future link
quality metrics
Add routing tests including 100-node all-pairs reachability simulation
(9900/9900 delivered, 0 loops, avg 4.0 hops, max 8).
Update fips-routing.md to reflect bloom filter routing as the primary
forwarding mechanism, with greedy tree routing as fallback during
convergence windows.
Split handlers.rs (986 lines) into handlers/ with 5 subfiles organized
by responsibility: rx_loop, encrypted, handshake, dispatch, timeout.
Split tests.rs (2350 lines) into tests/ with 4 subfiles: unit tests,
handshake integration, spanning tree convergence, and bloom filter tests.
Shared test helpers extracted to tests/mod.rs.
Visibility adjusted from pub(super) to pub(in crate::node) for handler
methods now two levels deep. Unused imports cleaned up in node/mod.rs.
All 316 tests pass, zero warnings.
Johnathan Corgan
OceanSlimandGitHub
Origami74