mirror of
https://github.com/jmcorgan/fips.git
synced 2026-08-09 16:24:45 +00:00
3bc8e5611cb3c1e22c19558ea989016d282dd3f4
20
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Johnathan Corgan
|
dae33d4fd1 |
chaos: bump bloom-storm bloom_send_rate ceiling 30 → 40
The bloom-storm scenario's bloom_send_rate ceiling has been bumped from 30 to 40 sends per node over the trailing 30 s window. A 59-rep characterization run under `github-runner-equivalent` pressure with per-container CPU pinning to `cpuset=0,1` (mimicking a 2-core `ubuntu-latest` runner) measured n04 (the structural max-spike node) at mean 24.4, P99 29, max 30. The original ceiling of 30 sat at the lab's structural max, leaving no headroom for the asymmetric transient spikes observed on GitHub Actions (n04=34 on master CI run 25933972365, re-fired on run 26008950865). GHA fires do not reproduce on this lab host even with the cpuset sidecar applied. Rationale: lab max + ~2σ ≈ 39.4 → round to 40, giving 33 % margin over the lab maximum while staying well below the deployment-scale storm rate (~480× steady state). The companion `min_parent_switches` guard is unchanged. See README.md alongside this file for the updated threshold derivation. |
||
|
Johnathan Corgan
|
b3a1fb464f |
testing: add bloom-storm chaos scenario
Six-node depth-4 mesh with an induced upstream parent flap. Asserts a
trailing-window ceiling on per-node `stats.bloom.sent` and a sanity
floor on parent-switch count over a ~3-4 min observation window.
Guards against the regression class where a spanning-tree update that
changes only an internal path edge (no root or depth delta) fails to
be properly contained and instead propagates to leaves as a sustained
bloom-traffic oscillation, visible only at fleet scale and only after
several minutes of uptime.
Adds a new chaos primitive (`link_swap`) for deterministic asymmetric
link-cost flapping and a post-run assertion framework with two
checks:
- `bloom_send_rate.max_per_node`: trailing-window ceiling on the
`show_bloom` stats counter delta. Calibrated against the
post-mortem reproduction harness data (per-variant counter table
against pre-fix vs post-fix binaries).
- `min_parent_switches.min_total`: sanity guard against a
misconfigured harness where the flap inducer fires but the
topology never produces a real parent-switch event (e.g., wrong
root election from a different seed). Without this, the
bloom-rate assertion would trivially pass on any binary
including a regressed one.
The runner exits 3 on assertion failure (alongside 0 success and 2
panic-detected). Threshold derivation is documented in the scenario
README; the seed pin is also documented there since smallest-NodeAddr
root election is sensitive to the pubkey hash ordering.
Wired into ci-local.sh's chaos pool and the GitHub CI chaos matrix.
|
||
|
Johnathan Corgan
|
37c2973e2f |
Test infrastructure overhaul: gateway robustness + full CI coverage
Single combined commit covering five interlocking pieces of test and CI work that landed during the v0.3.0-prep cycle. ## fips-gateway robustness - src/bin/fips-gateway.rs DNS upstream probe converted from a 3-second hard-fail to a bounded retry loop (5 attempts × 1s timeout, 1s sleep between attempts; ~10s worst case). Covers the cold-boot race where the daemon's TUN is up but the DNS responder at [::1]:5354 is still binding. Each failed attempt logs at INFO. In production the binary's retry is the live recovery mechanism; with retry it recovers silently instead of relying on Restart=on-failure (~5s blip + spurious ERROR per cycle). - packaging/debian/fips-gateway.service `ExecStartPre` now waits up to 30 seconds for the daemon's `fips0` TUN to appear before exec'ing the gateway binary. Eliminates the cold-boot race where the gateway exits with `fips0 interface not found` and recovers via `Restart=on-failure`, producing a 5-second blip and a spurious error log per restart cycle. - testing/docker/entrypoint.sh gateway-mode waits up to 30s for the daemon's DNS responder to bind [::1]:5354 (probes once per second with `dig @::1 -p 5354 ... test.fips`) before exec'ing fips-gateway. Belt-and-suspenders with the binary's own retry: in CI we want deterministic startup ordering. On timeout, fall through so the binary's probe reports the definitive error. ## Test infrastructure DNS bind migration to ::1 After session 359's daemon DNS-bind default flipped from `127.0.0.1` to `::1` (the production fix for ISSUE-2026-0002), the static-test infrastructure was carrying a stale workaround that overrode the default back to IPv4 loopback. The fips-gateway integration test exposed the divergence: the gateway probes its DNS upstream at `[::1]:5354` (production default) while the daemon was binding `127.0.0.1:5354` from the template override — IPv6-explicit sockets do not accept v4-mapped traffic, so the upstream probe exhausted retries and the gateway exited. - Drop the explicit `bind_addr: "127.0.0.1"` line from every test config that emits it: testing/static/configs/node.template.yaml, testing/chaos/configs/node.template.yaml, the sidecar heredoc in testing/docker/entrypoint.sh, testing/acl-allowlist/generate-configs.sh (six per-node blocks), testing/nat/scripts/generate-configs.sh, and the four tor templates under testing/tor/. Daemon picks up its production `::1` default. - Flip the dnsmasq forwarder for `.fips` in testing/docker/Dockerfile from `127.0.0.1#5354` to `::1#5354` so dnsmasq on the shared test image continues to reach the daemon. Template and Dockerfile must move together since most static suites resolve `<npub>.fips` via the test-image dnsmasq. ## rekey-accept-off integration variant + UDP unit test - New `rekey-accept-off` topology and docker-compose profile under testing/static/. 2-node variant where node-b runs with `udp.accept_connections: false`. Pins the regression class that ISSUE-2026-0004 fixed (cross-connection winner's rekey msg1 was being filtered by the accept_connections gate, breaking rekey). - testing/static/scripts/rekey-test.sh accepts REKEY_TOPOLOGY and REKEY_ACCEPT_OFF_NODES env vars; its inject-config subcommand applies the per-node `udp.accept_connections: false` edit, and the test asserts no sustained "Dual rekey initiation" log lines. - New UDP variant of `should_admit_msg1` admit-rekey unit test in src/node/tests/handshake.rs. ## ci-local.sh full integration coverage - New runner functions and dispatcher entries for `acl-allowlist`, `nat-cone` / `nat-symmetric` / `nat-lan`, `rekey-accept-off`, `dns-resolver`, `deb-install`. Each integrates with the existing summary tracking via `record`. - New `--with-tor` flag (off by default) gates `tor-socks5-outbound` and `tor-directory-mode` runners. Tor stays opt-in because both harnesses depend on the live Tor network and would introduce a flake source unrelated to the FIPS code. - New suite arrays (`ACL_SUITES`, `NAT_SUITES`, `DNS_RESOLVER_SUITES`, `DEB_INSTALL_SUITES`, `TOR_SUITES`) drive both the default sweep and `--list` output. - `run_suite` extended to accept the new suite names for `--only` invocations. ## GitHub CI matrix expansions - `gateway` matrix entry runs testing/static/scripts/gateway-test.sh against the existing docker-compose `gateway` profile. - `rekey-accept-off` matrix entry exercises the new topology with REKEY_ACCEPT_OFF_NODES=b. - `deb-install` matrix (debian12 + ubuntu24 + ubuntu26) runs testing/deb-install/test.sh with privileged systemd containers. ~5-7 min cold cache, ~2 min warm per distro. Self-contained: builds its own .deb in a Debian 12 cargo-deb builder image; does not depend on the build job's pre-built artifact. - `dns-resolver` matrix entry runs the full 13-scenario harness (per-distro systemd resolver-backend tests + real-fips end-to-end scenarios) in a single job. Pins the production DNS bind path that ISSUE-2026-0002 lived in. ~7-12 min warm, ~12-15 min cold. Verified locally: full `bash testing/ci-local.sh` sweep passes, including 5/5 deb-install distros and all 13 dns-resolver scenarios. Tor-inclusive sweep (`--with-tor`) verified in a follow-up run. |
||
|
Johnathan Corgan
|
fed6cc6987 |
Fix chaos sim DNS pipeline, ephemeral npub tracking, and analysis
Three infrastructure bugs fixed: - DNS resolution never populated the identity cache because Docker overwrites /etc/resolv.conf at container start. Fix: bind-mount resolv.conf in the chaos compose template, matching the static and sidecar test configs. - Traffic generator used config-time npubs for iperf3 targets, but ephemeral nodes generate fresh keypairs at startup. Fix: share the peer churn manager's runtime npub cache with the traffic manager. - Log analysis had no discovery counters and used wrong patterns. Fix: add discovery section with correct log message matching. Also adds timestamped output directories (YYYYMMDD-HHMMSS-scenario), coord_ttl_secs override in maelstrom.yaml, FIPS_SIM_OUTPUT env var support, and maelstrom-sparse scenario for sparse topology testing. |
||
|
Johnathan Corgan
|
5053cf673d |
Add connect/disconnect control commands and maelstrom chaos scenario
Add runtime peer management to the FIPS daemon via control socket commands, and a new chaos simulation scenario that exercises dynamic topology mutation with ephemeral node identities. Daemon (connect/disconnect commands): - Extend control socket Request with optional params field - Add commands.rs module for mutating command dispatch, separate from read-only queries - Add api_connect() on Node: builds ephemeral PeerConfig (no auto- reconnect), pre-seeds identity cache, reuses initiate_peer_connection - Add api_disconnect() on Node: calls remove_active_peer(), clears retry_pending to suppress reconnection - Route non-show_* commands to async command dispatch in rx_loop fipsctl CLI: - Add Connect and Disconnect subcommands accepting npub or hostname - Resolve hostnames from /etc/fips/hosts before sending to daemon - Refactor socket I/O into reusable send_request helper Chaos simulator (maelstrom scenario): - Add PeerChurnManager: periodically disconnects a random active link and connects a random unconnected node pair via control socket - Add send_command() to control.py using base64-encoded JSON payloads to avoid shell quoting issues in docker exec - Add PeerChurnConfig to scenario with interval and ephemeral_fraction - Ephemeral identity support: nodes configured without nsec generate fresh keypairs on restart; simulator queries show_status for new npub and updates its cache via on_node_restart callback - Add maelstrom.yaml: all chaos dimensions (netem, link flaps, node churn, peer topology churn, traffic) with 50% ephemeral identity |
||
|
Johnathan Corgan
|
9e63b42bd9 |
Consolidate Docker test harness infrastructure
Replace 4 near-identical per-harness Docker setups with unified shared infrastructure. Net result: -463 lines across 55 files, faster CI (8.5 min vs ~13.5 min), 14 scenarios (down from 21). Unified Docker image (testing/docker/): - Single Dockerfile (trixie-slim) with FIPS_TEST_MODE env var for mode dispatch: default, chaos, sidecar, tor-socks5, tor-directory - Single entrypoint.sh with conditional logic per mode - Replaces 5 Dockerfiles, 3 entrypoints, 4 resolv.conf copies Shared build and libraries (testing/scripts/, testing/lib/): - testing/scripts/build.sh: single build script with macOS zigbuild support, replaces 4 per-harness copies - testing/lib/derive_keys.py: shared key derivation module, replaces 3 copies of derive-keys.py - testing/lib/log_analysis.py: shared log analysis extracted from chaos sim/logs.py, with CLI interface and rekey cutover tracking - testing/lib/wait-converge.sh: shared convergence wait helpers (wait_for_links, wait_for_peers) using fipsctl JSON polling Scenario consolidation: - Remove 7 redundant scenarios: tcp-chain (subsumed by tcp-mesh), tcp-only (subsumed by tcp-mesh), chaos-10 (replaced by churn-mixed --nodes 10), churn-10/churn-20/churn-20-mixed (subsumed by parameterized churn-mixed), cost-mixed-7node (overlaps mixed-technology) - Add churn-mixed scenario with --nodes flag for scale testing - Reduce idle scenario durations: smoke-10 60s→30s, ethernet-only 90s→30s, cost-avoidance 120s→45s, depth-vs-cost 120s→45s, bottleneck-parent 120s→60s, mixed-technology 180s→90s CI updates: - ci-local.sh: unified image build, structured chaos suite entries with per-scenario flags, --skip-build for sidecar - ci.yml: shared binary install + image build step, updated scenario matrix, chaos_flags support for parameterized scenarios - Add tcp-mesh and congestion-stress to CI matrix - Static ping test uses active peer convergence detection instead of hardcoded 5s sleep Chaos infrastructure improvements (from discovery-rework branch): - Pre-built Docker image instead of per-service build at scale - --nodes flag in chaos.sh for runtime topology size override |
||
|
Johnathan Corgan
|
f37eb4b846 |
Fix documentation drift from recent feature additions
Update 9 documentation files to match current implementation: - Add missing rekey config section (node.rekey.*) and host mapping section to fips-configuration.md - Update Ethernet frame format from [type:1][payload] to [type:1][length:2 LE][payload] in wire-formats and transport docs - Fix Ethernet effective MTU from interface-1 to interface-3 - Mark rekey as Implemented in mesh-layer and session-layer status tables - Change TCP default port examples from 443 to 8443 - Add rekey, persistent identity, host mapping, mesh size estimation to README features and status sections - Update chaos scenario count from 16 to 20, add rekey topology to static test docs |
||
|
Johnathan Corgan
|
aa53da061f | Add local CI runner script and gitignore fipstop in test dirs | ||
|
Johnathan Corgan
|
56d39f223b |
Add ECN congestion signaling and transport congestion detection
Implement hop-by-hop ECN congestion signaling through the FMP layer, transport-level congestion detection via kernel drop counters, and chaos harness integration for end-to-end validation. FMP/session ECN plumbing: - Thread ce_flag parsed at link layer through dispatch_link_message, handle_session_datagram, handle_session_payload, and handle_encrypted_session_msg to session delivery - Replace hardcoded false in session-layer record_recv() with actual ce_flag, activating ecn_ce_count tracking in session MMP ECN congestion detection and CE relay: - Add EcnConfig (node.ecn.*) with configurable loss_threshold (5%) and etx_threshold (3.0) for transit congestion detection - Add send_encrypted_link_message_with_ce() that ORs FLAG_CE into FMP header flags; original method delegates with ce_flag=false - Compute outgoing_ce = incoming_ce || local congestion on next-hop link, enabling hop-by-hop CE relay through transit nodes IPv6 ECN-CE marking: - Mark ECN-CE (0b11) in IPv6 Traffic Class on received DataPackets before TUN delivery when FMP CE flag is set - Only marks ECN-capable packets (ECT(0)/ECT(1)); Not-ECT packets unchanged per RFC 3168 Transport congestion abstraction and UDP kernel drop detection: - Add TransportCongestion struct to transport layer for transport- agnostic local congestion indicators - Replace tokio::UdpSocket with AsyncFd<socket2::Socket> using libc::recvmsg() with ancillary data parsing - Enable SO_RXQ_OVFL for kernel receive buffer drop counter on every packet, wiring up previously-stubbed UdpStats.kernel_drops - Add TransportDropState for per-transport delta tracking with 1s tick sampling via sample_transport_congestion() - Extend detect_congestion() with transport kernel drop check alongside MMP loss metrics Congestion monitoring and control: - Add CongestionStats (ce_forwarded, ce_received, congestion_detected, kernel_drop_events) to NodeStats with snapshot serialization - Wire counters into forwarding path, session handler, and transport drop sampling with rate-limited warn logging (5s interval) - Expose congestion data in show_routing control query and ecn_ce_count in show_mmp peer entries - Add congestion counters to fipstop routing tab in two-column layout Chaos harness integration: - Add query_routing(), query_transports(), snapshot_all_congestion() to chaos control module - Add congestion/kernel-drop log analysis in logs module - Add congestion-stress scenario: 10-node tree, 1 Mbps bandwidth, 5-10% netem loss, heavy iperf3 traffic - Add IngressConfig for tc ingress policing with per-peer policer filters simulating upstream bandwidth bottlenecks - Add iperf3 JSON result capture to traffic manager for throughput measurement across scenarios - Add ECN A/B test scenarios (ecn-ab-on/off.yaml) with ingress policing and comparison script - Enable TCP ECN negotiation (tcp_ecn=1 sysctl) in container entrypoint for end-to-end CE propagation Tests: - 10 ECN unit/integration tests: mark_ipv6_ecn_ce variants, CE relay chain (3-node propagation), EcnConfig serde roundtrip - 3 transport drop congestion detection unit tests Documentation: - Update fips-mesh-layer.md: replace outdated CE Echo stub with full ECN Congestion Signaling section covering detection logic, CE relay, IPv6 marking, session tracking, and monitoring counters - Update fips-configuration.md: add node.ecn.* parameter table and ecn block in complete reference YAML - Update fips-transport-layer.md: add Congestion Reporting section with TransportCongestion struct, congestion() trait method, and per-transport status; document AsyncFd/recvmsg/SO_RXQ_OVFL in UDP - Update chaos README: add congestion/ECN scenario docs, ingress traffic control, and iperf3 JSON capture sections - Update README.md: add ECN to features list and "What works today"; update transport and tooling entries |
||
|
Johnathan Corgan
|
77ac8c822e |
Add fipstop TUI monitoring tool with smoothed metrics and quality indices
fipstop: ratatui-based TUI for real-time monitoring of a running FIPS daemon. Tabs and navigation: - 8 navigable tabs: Node, Peers, Transports, Sessions, Tree, Filters, Performance, Routing - Tab/BackTab navigation with group separators in tab bar - Table views with selectable rows, detail drill-down panels, and scrollbars Node tab: - Runtime info: pid, exe path, uptime, control socket path, TUN adapter name - Identity: npub, node_addr, ipv6 address - State summary with peer/session/link/transport/connection counts - TUN IPv6 traffic and forwarded transit traffic counters Peers tab: - Table with Name, Address, Conn, Depth, SRTT, Loss, LQI, Pkts Tx/Rx - Detail panel: identity, connection info, transport cross-reference, tree/bloom state, link stats, MMP metrics with LQI Sessions tab: - Table with Name, Remote Addr, State, Role, SRTT, Loss, SQI, Path MTU, Last Activity - Detail panel: identity, session info, traffic stats, MMP metrics with SQI Transports tab: - Hierarchical tree view: expandable transport parents with nested links (▼/▶ indicators, ├─/└─ tree chars, Space/Arrow to expand/collapse) - Transport detail: type-specific stats (UDP/TCP/Ethernet) - Link detail: peer cross-reference with MMP metrics and LQI Performance tab: - Link-layer MMP: SRTT, loss, ETX, LQI, goodput per peer - Session-layer MMP: SRTT, loss, ETX, SQI, path MTU per session - Trend indicators (rising/falling/stable) with context-aware coloring Routing tab: - Routing state: cache sizes, pending lookups, recent requests - Coordinate cache: entries, fill ratio, TTL, expiry, avg age - Statistics: forwarding, discovery request/response, error signal counters Tree tab: - Spanning tree position with 16 announce stats (inbound/outbound/cumulative) Filters tab: - Bloom filter announce stats, per-peer fill ratio and estimated node count MMP metrics enhancements: - Add etx_trend DualEwma for smoothed ETX tracking - Add smoothed_loss() and smoothed_etx() accessors (long-term EWMA) - LQI (Link Quality Index) = smoothed_etx * (1 + srtt_ms / 100) - SQI (Session Quality Index) = same formula for session layer - All loss/ETX displays prefer smoothed values with raw fallback Control socket: - Add smoothed_loss, smoothed_etx, lqi/sqi to show_peers, show_sessions, and show_mmp JSON responses - Rename fips_address to ipv6_addr in show_status and show_peers - Add tun_name and control_socket to show_status - FHS-compliant 3-tier default path: $XDG_RUNTIME_DIR, /run/fips, /tmp Node extensions: - Add started_at/uptime() to Node - Add tun_name() accessor Docker sidecar updates: - TCP transport support via FIPS_PEER_TRANSPORT env var - Build scripts include fipstop binary |
||
|
Johnathan Corgan
|
cd9289e0f3 |
Update test harness docs and add transport_mix support
Chaos harness enhancements: - transport_mix config: weighted random transport assignment for random topologies (erdos_renyi, random_geometric) with UDP/Ethernet/TCP - Replace LoRa with Bluetooth L2CAP in cost-based/mixed-tech scenarios using realistic netem values (15-40ms delay, 5-15ms jitter, 2-8% loss) - New churn-20-mixed scenario: 20-node Erdos-Renyi with 60% UDP, 20% Ethernet, 20% TCP, full netem/link-flap/churn/bandwidth config - Expanded chaos README with full scenario catalog in four categories Static harness: - Updated README with topology table and scenario count |
||
|
Johnathan Corgan
|
ec64a0dce1 |
Add TCP transport implementation and test harness support
Implement TCP transport for FIPS enabling firewall traversal and serving as the foundation for future Tor transport. This is the first connection-oriented transport in the system. Key design decisions: - FMP header-based framing: reuses existing 4-byte FMP common prefix for packet boundary recovery with zero framing overhead - Session survives TCP reconnection: Noise/MMP/FSP state bound to npub, not TCP connection; MMP liveness is sole authority for peer death - Connect-on-send: fresh connection on first send, transparent reconnect - close_connection() trait method for cross-connection deduplication cleanup New transport files: - src/transport/tcp/mod.rs: TcpTransport, connection pool, accept loop - src/transport/tcp/stream.rs: FMP-aware stream reader (shared with Tor) Modified: transport trait (close_connection), TcpConfig, TransportHandle match arms, create_transports(), initiate_connection() for connection- oriented links, cross-connection tie-breaker cleanup, design docs. Tree announce loop and TCP stability fixes: - Preserve tree announce rate-limit state across reconnection: carry forward last_tree_announce_sent_ms when a peer reconnects so the rate-limit window isn't reset to zero - Drop oversize TCP packets at sender: pre-send MTU check returns MtuExceeded instead of writing to the stream, preventing receiver-side connection teardown and reset-reconnect cycles Chaos harness: - TCP transport support: tcp_edges/has_tcp/tcp_peers in SimTopology, transport-aware config_gen with per-edge transport type, TCP port 443, pure-TCP node support - Include all non-Ethernet edges in directed_outbound() - Fix netem/links log messages to say "IP-based" instead of "UDP" - Add tcp-chain, tcp-only, and tcp-mesh scenario files Static harness: - Transport-aware config generation (get_default_transport, transport_port) - TCP transport injection via Python post-processing - Add tcp-chain topology and docker-compose profile |
||
|
Johnathan Corgan
|
daf1e629df |
Change default UDP port to 2121 and EtherType to 0x2121
Update the default UDP bind port from 4000 to 2121 (decimal) and the default Ethernet EtherType from 0x88B5 to 0x2121 across all source code, documentation, configuration templates, test fixtures, and scripts. Remove references to "IEEE 802 experimental range" since 0x2121 is not in that range. |
||
  
|
c1589c02af |
Cross-compilation and macOS compatibility fixes (#1)
- Ethernet ioctl: cfg-gate the ioctl request parameter type — c_int on musl, c_ulong on gnu — so the same code compiles on both x86_64-unknown-linux-gnu and x86_64-unknown-linux-musl targets - Chaos harness macOS support: replace direct host 'ip link' invocations with a privileged Docker container helper (--net=host --pid=host) that shares the Docker VM's namespaces, making veth pair setup work on both Linux and macOS (where host 'ip' is unavailable and container PIDs live inside the Docker Desktop VM) - Python 3.9 compat: add 'from __future__ import annotations' to docker_exec.py for X|Y union syntax support - Add deploy/ to .gitignore Co-authored-by: origami74 <origami74@gmail.com> |
||
|
Johnathan Corgan
|
d29da442ac |
Add Ethernet transport with beacon discovery
Implement raw Ethernet transport using AF_PACKET SOCK_DGRAM on Linux with EtherType 0x88B5 (IEEE experimental range) and 1-byte frame type prefix (0x00=data, 0x01=beacon). Transport implementation: - EthernetConfig with interface, ethertype, MTU, buffer sizes, and four independent discovery knobs (discovery, announce, auto_connect, accept_connections) - PacketSocket/AsyncPacketSocket wrappers with ioctl helpers for interface index, MAC address, and MTU queries - EthernetTransport with Transport trait impl, async start/stop/send, receive loop dispatching data frames and discovery beacons - Discovery beacons (34 bytes: type + version + x-only pubkey) with DiscoveryBuffer for peer accumulation and dedup - Atomic statistics counters (frames, bytes, errors, beacons) - Platform-gated with #[cfg(target_os = "linux")] Transport-layer discovery integration: - Promote auto_connect() and accept_connections() to Transport trait with default implementations and TransportHandle dispatch - Extract initiate_connection() so both static peer config and discovery auto-connect share the same handshake initiation path - Add poll_transport_discovery() to the tick handler to drain discovery buffers and auto-connect to discovered peers - Enforce accept_connections() in handle_msg1() — transports with accept_connections=false silently drop inbound handshakes Node integration: - create_transports() handles Ethernet named instances - resolve_ethernet_addr() parses "interface/mac" address format - transport_mtu() generalized for multi-transport operation Test harness: - VethPair RAII struct for veth pair lifecycle management - Three #[ignore] integration tests requiring root/CAP_NET_RAW: two-node handshake, data exchange, mixed transport coexistence - Chaos harness: transport-aware topology model, VethManager for veth pairs between Docker containers, Ethernet-aware config gen, netem split (HTB+u32 for UDP, root netem for veth), transport-aware link flaps and node churn with veth re-setup - Container entrypoint waits for configured Ethernet interfaces before starting FIPS (handles veth creation timing) - New scenarios: ethernet-only (4-node ring), ethernet-mesh (6-node mixed UDP+Ethernet with netem and link flaps) Documentation: - fips-transport-layer.md: Ethernet section, beacon discovery, WiFi compatibility, updated discovery state, trait surface additions, implementation status table - fips-configuration.md: Ethernet parameter table, named instances, peer address format, mixed UDP+Ethernet example, complete reference - fips-wire-formats.md: Ethernet frame type prefix note |
||
|
Johnathan Corgan
|
27da3c0bbf |
Add fipsctl to Docker test harness builds
Include fipsctl binary in both static and chaos test harness Dockerfiles, build scripts, and gitignores alongside the existing fips binary. |
||
|
Johnathan Corgan
|
0d93a19e07 |
Implement cost-based parent selection with periodic re-evaluation
Cost-based parent selection: - Replace depth-only parent selection with effective_depth = depth + link_cost - link_cost computed from locally measured MMP metrics: etx * (1.0 + srtt_ms / 100.0) - Prevents bottleneck subtrees in heterogeneous networks where a LoRa link at depth 1 would otherwise always beat fiber at depth 2 - Configurable hysteresis (default 0.2) prevents marginal parent switches - Configurable hold-down timer (default 30s) suppresses re-evaluation after parent switch - Mandatory switches (parent lost, root change) bypass both safeguards - Link costs passed as HashMap parameter to keep TreeState pure Periodic re-evaluation: - evaluate_parent() was only called on TreeAnnounce receipt or parent loss; after tree stabilization, link degradation went undetected - Added timer-based re-evaluation (reeval_interval_secs, default 60s) that calls evaluate_parent() from the tick handler with current MMP link costs - Respects existing hold-down and hysteresis safeguards - Short-circuits when disabled or <2 peers Design documentation: - Update 7 design docs to reflect cost-based parent selection - Replace depth-only algorithm descriptions with effective_depth model - Replace rejected cumulative path cost spec with local-only design rationale - Rewrite Example 2 (heterogeneous links) for local-only cost model - Update config docs: parent_switch_threshold replaced by parent_hysteresis, hold_down_secs, reeval_interval_secs Chaos simulation enhancements: - fips_overrides with deep merge for per-scenario FIPS config customization - Explicit topology algorithm for deterministic test graphs - Control socket querying via fipsctl for tree/MMP snapshot collection - Edge existence validation in netem manager - Per-link netem policy overrides - 9 new chaos scenarios covering cost avoidance, depth-vs-cost tradeoffs, stability, mixed topologies, periodic re-evaluation, and bottleneck parent 12 new unit tests, 667 total passing, clippy clean. |
||
|
Johnathan Corgan
|
cfb087a95d |
Update design docs for heartbeat, auto-reconnect, handshake retry, and sim improvements
fips-link-layer.md: - Rewrite Liveness Detection: explicit Heartbeat (0x51) with 10s interval and 30s dead timeout replaces vague gossip-as-heartbeat description - Add Auto-Reconnect section: MMP dead timeout triggers retry with unlimited backoff for auto_reconnect peers - Add Handshake Message Retry section: link + session layer resend with exponential backoff within timeout window - Add Heartbeat to Link Message Types table - Update Implementation Status with three new implemented features fips-configuration.md: - Add handshake_resend_interval_ms, handshake_resend_backoff, handshake_max_resends to rate_limit table - Add heartbeat_interval_secs, link_dead_timeout_secs to general table - Add peers[].auto_reconnect to peers table - Note auto-reconnect bypasses max_retries in retry section - Update complete reference YAML with all new parameters fips-wire-formats.md: - Rename 0x51 from reserved Keepalive to implemented Heartbeat - Update Disconnect reason 0x07 to Heartbeat liveness timeout testing/chaos/README.md: - Add runner.log to output files - Add Directed Outbound Configs subsection |
||
|
Johnathan Corgan
|
78a73e1749 |
Auto-reconnect after MMP peer removal, directed outbound configs, sim improvements
Auto-reconnect: - Add per-peer auto_reconnect config (default true) to PeerConfig - schedule_reconnect() feeds removed peers back into retry system with unlimited retries and exponential backoff after MMP dead timeout - RetryState gains reconnect flag to distinguish startup retries (max_retries-limited) from auto-reconnect (unlimited) Retry re-fire fix: - process_pending_retries() now pushes retry_after_ms past the handshake timeout window after successful initiate_peer_connection(), preventing retries from firing every tick with no backoff Chaos sim improvements: - Directed outbound configs: BFS spanning tree + lower-ID-first assignment eliminates dual-connect race conditions in simulation - Save runner log (runner.log) alongside per-node logs for event correlation - Increase churn-20 traffic aggressiveness and node churn (max_down_nodes 3→5, traffic interval min 0s, duration max 90s, concurrent flows 5→10) |
||
|
Johnathan Corgan
|
66c268a564 |
Add static and stochastic Docker test harnesses
Move examples/docker-network/ to testing/static/ and add testing/chaos/ as a new stochastic simulation harness. testing/static/ — Static 5-node test harness: - Fixed mesh, chain, and mesh-public topologies with docker compose - Manual test scripts (ping, iperf, netem) - Build script, config generation, key derivation testing/chaos/ — Stochastic network simulation: - Python orchestrator generating N-node FIPS meshes with dynamic network conditions, driven by reproducible YAML scenarios - Topology generation: random geometric, Erdos-Renyi, or chain graphs with BFS connectivity guarantee - Per-link netem: HTB classful qdiscs with u32 filters for per-peer impairment (delay, loss, jitter), stochastic mutation across configurable policy profiles - Per-link bandwidth pacing: HTB rate limiting with configurable tiers (1/10/100/1000 mbps) randomly assigned per edge - Link flaps: tc netem 100% loss with graph connectivity protection - Node churn: docker stop/start with netem re-application on restart, shared down_nodes tracking across all managers - Traffic generation: random iperf3 sessions between node pairs - Down-node guards: all docker exec callers check container liveness, auto-detect crashed containers via is_container_running() safety net - Log collection and post-run analysis (panics, errors, sessions, MMP metrics, tree reconvergence) - chaos.sh wrapper with --seed, --duration, --verbose, --list options - Four scenarios: smoke-10, chaos-10, churn-10, churn-20 |