handle_peer_removal_tree_cleanup reparents or self-roots the node when
its parent link drops, but omitted the coordinate-cache invalidation that
every other position-change path performs. Cached entries for downstream
destinations kept the node's now-stale coordinate prefix, and because
find_next_hop refreshes the TTL on every routing access, an actively
routed stale entry never self-expired — corrected only by a fresh insert.
Mirror the loop-detection branch: inside the parent-loss changed block,
invalidate both classes — invalidate_via_node (reparent) and
invalidate_other_roots (self-root). Add regression tests for a parent-link
removal that reparents (via-node entry dropped, same-root sibling
preserved) and one that self-roots (both via-node and stale old-root
entries dropped).
Add six forwarding counters that partition transit-forwarded packets by their
tree relationship to the chosen next hop: tree-up (peer is our ancestor),
tree-down (peer is our descendant and the destination is within its subtree),
tree-down-cross (peer is our descendant but the destination is outside its
subtree), cross-link descend (lateral peer, destination within its subtree),
cross-link ascend (lateral peer, destination outside its subtree), and
direct-peer. The six classes sum to forwarded_packets, asserted by a unit
test. Classification is computed from tree coordinates at the transit
chokepoint, so the error-signal routing callers are excluded.
The two "outside the chosen peer's subtree" classes are both up-and-over
forwards but differ in what they depend on. Tree-down-cross is the
dive-to-tree-child cut-through: we forward down to our own child for a
destination not beneath it, which is only possible because the child
advertised cross-link reach upward to us, beyond its own subtree. Its count
measures how much forwarding depends on that upward advertisement, i.e. what
would change if cross-link advertisements were narrowed to subtree-entry only.
Cross-link ascend, by contrast, uses the node's own lateral cross-link learned
from a peer's split-horizon advertisement, so it does not depend on any upward
advertisement.
Surface the counters through the forwarding stats snapshot (control socket,
show_routing and show_status) and reorganize the fipstop routing tab so its
two columns separate own/endpoint traffic (received, delivered, originated)
from forwarded/transit traffic (the route-class breakdown and drop reasons),
with the tree-down-cross line visually flagged.
Add a Loopback variant to TransportHandle backed by an unbounded
in-process channel and a shared address-to-receiver registry, so
node-level multi-node tests deliver packets directly between nodes
instead of over real localhost UDP sockets. This removes the kernel
UDP receive-buffer overflow that dropped handshake packets when many
tests ran in parallel under CPU contention, and lets the large-network
convergence tests run reliably in the default suite again (their
parallel-load ignore markers are removed).
The new transport and its enum variant are cfg(test)-gated, so the
daemon build is unaffected.
Raise the in-process backpressure headroom in make_test_node_with_mtu
(request an 8 MiB recv_buf_size on UdpConfig and grow packet_channel from
256 to 8192) to reduce localhost-UDP receive overflow under parallel-CPU
scheduler contention, and mark the large-network convergence tests
#[ignore] so cargo test --lib stays green by default. The ignored tests
remain runnable on demand with --ignored or --test-threads=1.
Add test_routing_bloom_hit_not_closer_falls_through_to_tree to
src/node/tests/routing.rs covering the regression class fixed in
a859da7: bloom candidates exist BUT none are strictly closer to
destination than the tree parent. Pre-fix find_next_hop returned
None (NoRoute); post-fix it falls through to greedy tree routing.
Existing tests covered bloom-hit-closer, bloom-preferred-over-tree,
no-bloom-hit-tree-fallback, and bloom-hit-without-coords — but the
in-between case was unpinned.
Topology: self is tree root with two children (tree_peer at distance
1, bloom_peer at distance 3); destination is one hop below tree_peer
(self distance 2). Only bloom_peer advertises dest in its filter.
Distance of the only bloom candidate (3) is not strictly less than
self's (2), so select_best_candidate returns None and the call must
fall through to greedy tree routing returning tree_peer. Asserts
explicit identity (assert_eq! tree_peer_addr) and rules out the
wrong-peer regression (assert_ne! bloom_peer_addr).
Implement TCP Wrappers-style peer access control using
/etc/fips/peers.allow and /etc/fips/peers.deny files. Evaluation
order: allow overrides deny, default permit when no files exist.
Three enforcement points: outbound connect (before dialing), inbound
handshake (msg1 receipt, after restart/rekey classification), and
outbound handshake completion (msg2, before peer promotion). Files
support npub, hex pubkey, host alias, and ALL wildcard entries with
automatic mtime-based reload.
Adds fipsctl acl show query, 954-line acl module with unit tests,
and a 6-node Docker integration harness (testing/acl-allowlist/)
exercising insider, outsider, and allowed-remote scenarios. CI
matrix entry included.
Closes#50
Co-authored-by: Johnathan Corgan <johnathan@corganlabs.com>
Identity cache: remove TTL-based expiry (60s TTL broke active sessions
after expiry since handle_tun_outbound checks identity_cache before
session table). Replace with LRU-only eviction bounded by configurable
identity_size (default 10K). Lookup now touches timestamp for LRU
freshness.
Cache merge: unify coord_cache and route_cache into single coordinate
cache. Both stored NodeAddr→TreeCoordinate; the layer distinction was
conceptual, not functional. Discovery-sourced entries now get the same
TTL+refresh treatment as session-sourced entries. Simplifies
find_next_hop() to single cache lookup.
Parent-change flush: clear coord_cache after recompute_coords() in both
parent-switch paths of handle_tree_announce(). Stale coordinates after
tree reconvergence cause dead-end routing that's more expensive than
re-discovery.
Tested: 493 unit tests passed, clippy clean, Docker mesh 20/20,
Docker chain 6/6.
Transit nodes cache destination coordinates when they forward
SessionSetup messages (via try_warm_coord_cache). These coord_cache
entries have a 5-minute TTL, after which they expire. Once expired,
the transit node can no longer forward data packets for that
destination — find_next_hop returns None and the node sends
CoordsRequired errors back to the source. This creates a permanent
routing failure for any multi-hop path after 5 minutes of the initial
session establishment, even if traffic is actively flowing.
The root cause was that find_next_hop used coord_cache.get(), a
read-only lookup that checks expiry but never extends it. Active
forwarding did not keep the cache warm. Meanwhile, get_and_touch()
existed but only updated last_used without extending expires_at.
Fix:
- find_next_hop now calls coord_cache.get_and_touch() instead of get()
- get_and_touch now calls entry.refresh() instead of entry.touch(),
which extends expires_at by the default TTL on each access
- find_next_hop signature changed from &self to &mut self to allow
the mutable cache access
This ensures that as long as traffic flows through a transit node,
the coord_cache entries stay warm and routing continues to work.
Entries still expire after 5 minutes of inactivity as designed.
Wire the discovery protocol into the data plane path so that
find_next_hop() consults route_cache as a fallback when coord_cache
has no entry. When session initiation fails due to missing routes,
trigger discovery (initiate_lookup) instead of immediately sending
ICMPv6 Destination Unreachable. On discovery completion, retry
session initiation for any pending TUN packets.
Changes:
- find_next_hop() falls back to route_cache when coord_cache misses
- handle_tun_outbound() triggers discovery on session failure
- handle_lookup_response() retries session after discovery completes
- handle_coords_required() triggers discovery for missing coordinates
- Add pending_lookups deduplication with 10-second timeout
- Periodic cleanup of stale lookups in tick handler
- New test: route_cache fallback verification in find_next_hop
Add src_addr to SessionDatagram envelope (34-byte header: msg_type +
src_addr + dest_addr + hop_limit) so transit routers can route error
signals back to the packet's originator.
Reclassify CoordsRequired/PathBroken as link-layer error signals
(plaintext inside SessionDatagram) rather than e2e encrypted session
messages. Transit routers generate these when forwarding fails and
route them to src_addr; if source is also unreachable, drop silently.
Remove redundant src_addr/dest_addr/hop_limit from SessionSetup,
SessionAck, and DataPacket (now in envelope). DataPacket header
reduced from 36 to 4 bytes. Remove PathBroken.original_src.
Fix routing loop vulnerability: gate bloom filter path on having
cached dest_coords to prevent blind forwarding between peers.
Simplify select_best_candidate() to require coordinates.
Fix gossip protocol type codes (0x11->0x20, 0x12->0x30, 0x13->0x31)
for consistency across all design docs.
All 5 design docs updated and cross-checked for consistency.
335 tests pass, zero warnings.
Add the full next-hop routing algorithm to Node::find_next_hop():
- Local delivery, direct peer, bloom filter candidates, greedy tree
routing fallback, with (link_cost, tree_distance, node_addr) ordering
- select_best_candidate() scores by peer→dest distance (not us→peer)
with self-distance check to prevent routing loops
- TreeState::find_next_hop() for greedy tree routing with progress
guarantee
- ActivePeer::link_cost() placeholder (constant 1.0) for future link
quality metrics
Add routing tests including 100-node all-pairs reachability simulation
(9900/9900 delivered, 0 loops, avg 4.0 hops, max 8).
Update fips-routing.md to reflect bloom filter routing as the primary
forwarding mechanism, with greedy tree routing as fallback during
convergence windows.
Johnathan Corgan
Alex XieandJohnathan Corgan