Bump version to 0.2.0 and finalize changelog with discovery rework,
Tor transport, connect/disconnect commands, reproducible builds, and
12 bug fixes.
Update design documentation for discovery protocol rework:
- fips-wire-formats.md: remove visited bloom filter from LookupRequest,
update size calculations
- fips-mesh-operation.md: replace flooding description with bloom-guided
tree routing, add retry/backoff/rate-limiting subsections
- fips-configuration.md: add 5 new discovery config parameters, update
control socket description for connect/disconnect commands
Breaking wire format change: DataPacket payloads inside the AEAD envelope
now carry a 4-byte port header [src_port:2 LE][dst_port:2 LE] before the
service payload. The receiver dispatches by destination port.
Port multiplexing:
- send_session_data() takes src_port/dst_port params, prepends port header
- New send_ipv6_packet() compresses IPv6 header and sends on port 256
- Receive path dispatches DataPackets by port: port 256 decompresses IPv6
header from session context and delivers to TUN, unknown ports dropped
- Port constants: FSP_PORT_HEADER_SIZE (4 bytes), FSP_PORT_IPV6_SHIM (256)
IPv6 header compression:
- New ipv6_shim module with compress_ipv6()/decompress_ipv6() pure functions
- Strips src/dst addresses (32 bytes) and payload length (2 bytes) from each
packet, preserving traffic class, flow label, next header, and hop limit
as 6-byte residual fields
- Addresses reconstructed from session context on receive side
- Net savings: 29 bytes per packet (overhead 106 → 77 bytes)
- FIPS_IPV6_OVERHEAD constant (77 bytes), effective_ipv6_mtu() updated
- 16 unit tests for round-trip fidelity, field preservation, error cases
Documentation:
- fips-wire-formats: DataPacket port header, port registry, IPv6 shim
format tables, updated encapsulation walkthrough and overhead budget
- fips-ipv6-adapter: FIPS_IPV6_OVERHEAD (77 bytes), updated MTU numbers,
TUN reader/writer flow with compression steps, impl status
- fips-session-layer: port-based service dispatch section, data transfer
description, impl status
- fips-intro: IPv6 adapter as port 256 service, node architecture updated
- fips-mesh-operation: packet size summary with compressed overhead
- DataPacket doc updated with port header and dispatch model
- session_wire.rs module doc: DataPacket Port Multiplexing section
Wire format diagrams:
- Add 24 SVG diagrams covering every FMP and FSP wire format: common
prefix, established frame headers, Noise IK handshake messages,
handshake flow, TreeAnnounce, AncestryEntry, FilterAnnounce,
LookupRequest/Response, SessionDatagram, Disconnect, SenderReport,
ReceiverReport, FSP complete message, SessionSetup/Ack/Msg3,
PathMtuNotification, CoordsRequired, PathBroken, and MtuExceeded
- Replace ASCII art in fips-wire-formats.md with SVG references
- Apply text edits to fips-mesh-layer.md, fips-mesh-operation.md,
fips-transport-layer.md, and fips-ipv6-adapter.md
Spanning tree dynamics:
- Add 12 topology SVG diagrams: node join (overview + 3-panel steps),
three-node convergence (4-panel), link addition with depth labels,
link removal, partition formation, and 6 real-world example diagrams
(office, mixed-link, two-site WAN topologies)
- Rewrite all code blocks to narrative prose with diagram references
- Add inline prior art attributions distinguishing Yggdrasil-derived
concepts from FIPS-novel contributions
- Add 3 new references (De Couto ETX, IEEE 802.1D, RFC 2328 OSPF) and
Prior Art summary
- Remove outdated sections: indirect partition note, integration test
gaps, DHT-based lookup reference
- Change "must elect a new root" to "must rediscover its new root"
Spanning tree design review (fips-spanning-tree.md):
- Rename "Root Election" to "Root Discovery" across docs
- Add "What Is a Spanning Tree?" introductory section
- Add parent selection intro explaining self-organization role
- Fix tree distance example: 4 hops, not 2
- Clarify timestamp field as advisory only
- Remove unimplemented ROOT_TIMEOUT and TREE_ENTRY_TTL from timing
parameters and implementation status tables
Bloom filter design review (fips-bloom-filters.md):
- Add "What Is a Bloom Filter?" intro section
- Rewrite Purpose section to frame filters as routing path identification
- Correct FPR analysis (old values were 3-50x overstated)
- Add Filter Occupancy Model based on network size and tree position
- Fix filter expiration to describe actual MMP-based cleanup
- Combine Scale Considerations with Size Classes after Wire Format
- Fix stale FPR values in src/bloom/mod.rs comments
Session layer review (fips-session-layer.md):
- Add inline prior art attributions: Noise Protocol Framework, WireGuard,
DTLS (RFC 6347), IKEv2 (RFC 7296), RFC 1191 PMTUD, Yggdrasil, NIP-44
- Replace warmup state machine ASCII art with SVG diagram
- Convert CoordsWarmup wire format code block to prose
- Add External References section with full citations
Level 5 implementation doc cleanup:
- Delete fips-software-architecture.md (redundant with protocol layer docs)
- Delete fips-state-machines.md (Rust tutorial, not protocol design)
- Add fipsctl command reference to README.md
- Update cross-references in fips-intro.md, docs/design/README.md,
fips-transport-layer.md, fips-configuration.md
Fixes:
- Correct fd::/8 to fd00::/8 in fips-session-layer.md,
fips-identity-derivation.svg, and fips-node-architecture.svg
- Fix config example MTU: 1197 → 1472 in fips-configuration.md
File organization:
- Move all SVG diagrams into docs/design/diagrams/ subdirectory
- Update all diagram references to use new paths
Cost-based parent selection:
- Replace depth-only parent selection with effective_depth = depth + link_cost
- link_cost computed from locally measured MMP metrics: etx * (1.0 + srtt_ms / 100.0)
- Prevents bottleneck subtrees in heterogeneous networks where a LoRa link
at depth 1 would otherwise always beat fiber at depth 2
- Configurable hysteresis (default 0.2) prevents marginal parent switches
- Configurable hold-down timer (default 30s) suppresses re-evaluation
after parent switch
- Mandatory switches (parent lost, root change) bypass both safeguards
- Link costs passed as HashMap parameter to keep TreeState pure
Periodic re-evaluation:
- evaluate_parent() was only called on TreeAnnounce receipt or parent loss;
after tree stabilization, link degradation went undetected
- Added timer-based re-evaluation (reeval_interval_secs, default 60s) that
calls evaluate_parent() from the tick handler with current MMP link costs
- Respects existing hold-down and hysteresis safeguards
- Short-circuits when disabled or <2 peers
Design documentation:
- Update 7 design docs to reflect cost-based parent selection
- Replace depth-only algorithm descriptions with effective_depth model
- Replace rejected cumulative path cost spec with local-only design rationale
- Rewrite Example 2 (heterogeneous links) for local-only cost model
- Update config docs: parent_switch_threshold replaced by parent_hysteresis,
hold_down_secs, reeval_interval_secs
Chaos simulation enhancements:
- fips_overrides with deep merge for per-scenario FIPS config customization
- Explicit topology algorithm for deterministic test graphs
- Control socket querying via fipsctl for tree/MMP snapshot collection
- Edge existence validation in netem manager
- Per-link netem policy overrides
- 9 new chaos scenarios covering cost avoidance, depth-vs-cost tradeoffs,
stability, mixed topologies, periodic re-evaluation, and bottleneck parent
12 new unit tests, 667 total passing, clippy clean.
Gate peer_inbound_filters() to only collect from tree peers (parent
and children), so outgoing filter computation merges only tree-sourced
information. All peers still receive FilterAnnounce messages and store
filters locally for routing queries — the restriction is only on what
gets merged into outgoing filters.
This prevents bloom filter saturation where mesh shortcuts cause every
node's filter to converge toward the full network. With tree-only
merge, filters contain subtree (from children) + complement (from
parent) + single-hop mesh views.
Implementation:
- Add is_tree_peer() helper to determine tree parent/child relationship
- Gate peer_inbound_filters() to tree peers only (single control point)
- Trigger bloom filter exchange on tree relationship changes
- Add est_entries, set_bits, fill ratio, and tree_peer fields to
FilterAnnounce send/receive debug logs
- Add test_bloom_filter_split_horizon test verifying directional
asymmetry: upward filters contain only the child's subtree, downward
filters contain only the complement
- Add print_filter_cardinality diagnostic helper for test inspection
Design docs:
- fips-bloom-filters.md: Add directional asymmetry and mesh peer filter
subsections, update per-peer filter model, saturation mitigation,
implementation status table
- fips-mesh-operation.md: Update filter propagation description, add
directional asymmetry, tree relationship change trigger
- fips-intro.md: Rewrite bloom propagation paragraph for tree-only merge
Rename FIPS Link Protocol (FLP) to FIPS Mesh Protocol (FMP)
The "Link Protocol" name understated the layer's scope — spanning tree
construction, bloom filter routing, greedy forwarding, and mesh-wide
coordination go well beyond link-level concerns. Rename fips-link-layer.md
to fips-mesh-layer.md, update FLP→FMP throughout docs and source code
(FLP_VERSION→FMP_VERSION, wire.rs, rx_loop.rs, spanning_tree.rs).
New SVG illustrations
- Protocol stack: color-coded layer diagram replacing ASCII art
- OSI mapping: side-by-side comparison with traditional networking layers
- Bloom filter propagation: 6-node tree with sender-colored filter boxes
showing split-horizon computation per link
- Routing decision flowchart: 5-step priority chain with candidate ranking
by tree distance and link performance
- Coordinate discovery: sequence diagram showing LookupRequest propagation,
response caching, and SessionSetup cache warming
Redesigned existing SVGs
- Architecture overview: uniform node layout, U-shaped encrypted link
connectors, separate end-to-end session line
- Node architecture: split Router Core into FSP and FMP layers, reorganize
transports into Overlay/Shared Medium/Point-to-Point categories
- Identity derivation: wider boxes, visible encode arrow, dashed npub line
fips-intro.md revisions
- Add inline references to prior work: Yggdrasil/Ironwood for coordinate
routing, Noise Protocol Framework for IK handshakes, WireGuard for
index-based session dispatch, Wikipedia for bloom filters, split-horizon,
and greedy embedding
- Add explanatory paragraphs after bloom filter diagram describing
split-horizon filter computation and candidate selection behavior
- Simplify transport abstraction language, remove I2P/LoRa references
- Fix LookupRequest wording ("propagates" not "floods"), note intermediate
node coordinate caching on lookup responses
- Rewrite architecture overview prose to match redesigned diagrams
SessionAck previously only carried the responder's coordinates
(src_coords). When the return path diverged from the forward path
(e.g., after tree reconvergence), transit nodes on the return path
lacked the initiator's coordinates and couldn't route the SessionAck
back, causing handshake timeouts.
Add dest_coords (initiator's coordinates) to the SessionAck wire
format, mirroring SessionSetup's design. Transit nodes now cache both
endpoints' coordinates when forwarding a SessionAck, making the return
path self-sufficient regardless of path asymmetry.
Root cause confirmed by churn-20 sim log analysis: the n04-n14
handshake failure was caused by n15 (return-path transit) lacking
n04's coordinates, not by stale tree routes through a downed node.
Implement hybrid coordinate cache warming strategy: piggyback coords
via CP flag when they fit within transport MTU, send standalone
CoordsWarmup (0x14) message when they don't. On CoordsRequired or
PathBroken receipt, send CoordsWarmup immediately with source-side
rate limiting (default 2s per destination, configurable).
- Add CoordsWarmup = 0x14 session message type (empty body, CP flag)
- Add send_coords_warmup() following send_session_msg() pattern
- Restructure send_session_data() to send standalone warmup before
data packet when piggybacked coords exceed MTU
- Add immediate CoordsWarmup response in handle_coords_required()
and handle_path_broken() with per-destination rate limiting
- Add coords_response_interval_ms config (node.session)
- Add RoutingErrorRateLimiter::with_interval() constructor
- Zero transit-path changes: existing try_warm_coord_cache() handles
CoordsWarmup identically to CP-flagged data packets
- Update design docs (session layer, wire formats, mesh operation,
configuration)
FIPS_OVERHEAD was 150 but had two bugs: the session AEAD tag (16 bytes)
was listed in the comment but missing from the arithmetic, and the
coordinate budget (~60 bytes) was undersized and didn't belong in a
constant representing fixed data path overhead.
Corrected to 106 bytes (the actual fixed overhead without coordinates).
This increases effective_ipv6_mtu from 1322 to 1366 for standard
Ethernet, well above the IPv6 minimum of 1280.
Added a guard in send_session_data() that computes the total wire size
with coordinates before committing to include them. If adding coords
would exceed the transport MTU, the CP flag is skipped and the warmup
counter is not decremented. This prevents silently producing oversized
packets at tree depth 2+.
Updated design docs (ipv6-adapter, wire-formats, mesh-operation) with
corrected overhead values.
Bring all 9 design documents into alignment with the current
implementation. Major additions include MMP coverage at both link and
session layers, wire format tables for SenderReport and ReceiverReport,
UDP socket buffer sizing, PathMtuNotification status updates, and
configuration parameter fixes (default_ttl key name, idle timeout MMP
exclusion semantics).
Johnathan Corgan