The awk pattern used $(NF-2) which picked up the retransmit count (0)
instead of the bandwidth value, because the retransmit field sits
between the bandwidth unit and "sender". Search for the bits/sec field
by content instead of position.
Docker testing infrastructure:
- Add iperf3 bandwidth testing (10s duration, 8 parallel streams)
- Install iperf3 in container, auto-start as daemon alongside FIPS
- Support --live flag for real-time iperf3 output during tests
- Aggregate [SUM] bandwidth reporting with correct units
Configuration templating system:
- Single node.template.yaml replacing per-node hand-written configs
- Topology definitions in configs/topologies/ (mesh.yaml, chain.yaml)
- generate-configs.sh script for automatic config generation
- Integrated into build.sh for regeneration on build
- Generated configs in generated-configs/ (gitignored)
Ping test improvements:
- Reduce to 1 ping per test for faster execution (~10s vs ~30s)
- Show response times (RTT) for each test
- Add Ctrl+C trap for clean exit
- Reduce convergence wait from 5s to 3s
Add dual-approach MTU handling to prevent TCP connections from hanging
when packets exceed the transport MTU after FIPS encapsulation.
ICMPv6 Packet Too Big:
- Generate RFC 4443 PTB messages for oversized packets at TUN outbound
- Inject back via TUN for local delivery to the application
- Per-source rate limiting (100ms interval, 10s entry expiry)
- MTU check in handle_tun_outbound before session encapsulation
TCP MSS Clamping:
- Intercept SYN packets in run_tun_reader() (outbound)
- Intercept SYN-ACK packets in TunWriter (inbound)
- Clamp MSS option to fit within effective MTU (transport - 127 overhead)
- Recalculate TCP checksum after modification
Code organization:
- ICMP, TCP MSS, and rate limiter modules in upper/ alongside existing
protocol-specific packet handling (dns.rs, tun.rs)
- Shared FIPS_OVERHEAD constant (127 bytes) and effective_ipv6_mtu()
function in upper/icmp.rs
- Node::effective_ipv6_mtu() delegates to the shared function
- run_tun_reader() accepts actual transport MTU from config
Example config corrections:
- UDP transport MTU set to 1472 across all configs (correct max UDP
payload for standard Ethernet: 1500 - 20 IPv4 - 8 UDP)
- Startup logging of effective MTU and max MSS values
Johnathan Corgan
Origami74andJohnathan Corgan